vsock/vmci: convert VMCI error code to -ENOMEM on receive

This adds conversion of VMCI specific error code to general -ENOMEM. It
is preparation for the next patch, which changes af_vsock.c behaviou

vsock/vmci: convert VMCI error code to -ENOMEM on receive

This adds conversion of VMCI specific error code to general -ENOMEM. It
is preparation for the next patch, which changes af_vsock.c behaviour
on receive to pass value returned from transport to the user.

Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

vsock/vmci: convert VMCI error code to -ENOMEM on send

This adds conversion of VMCI specific error code to general -ENOMEM. It
is needed, because af_vsock.c passes error value returned from transpor

vsock/vmci: convert VMCI error code to -ENOMEM on send

This adds conversion of VMCI specific error code to general -ENOMEM. It
is needed, because af_vsock.c passes error value returned from transport
to the user, which does not expect to get VMCI_ERROR_* values.

Fixes: c43170b7e157 ("vsock: return errors other than -ENOMEM to socket")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: vmw_vsock: vmci: Check memcpy_from_msg()

vmci_transport_dgram_enqueue() does not check the return value
of memcpy_from_msg(). If memcpy_from_msg() fails, it is possible that
uninitialized memo

net: vmw_vsock: vmci: Check memcpy_from_msg()

vmci_transport_dgram_enqueue() does not check the return value
of memcpy_from_msg(). If memcpy_from_msg() fails, it is possible that
uninitialized memory contents are sent unintentionally instead of user's
message in the datagram to the destination. Return with an error if
memcpy_from_msg() fails.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 0f7db23a07af ("vmci_transport: switch ->enqeue_dgram, ->enqueue_stream and ->dequeue_stream to msghdr")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock/vmci: fix repeated words in comments

Delete the redundant word 'that'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Da

vsock/vmci: fix repeated words in comments

Delete the redundant word 'that'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: remove noblock parameter from skb_recv_datagram()

skb_recv_datagram() has two parameters 'flags' and 'noblock' that are
merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0

net: remove noblock parameter from skb_recv_datagram()

skb_recv_datagram() has two parameters 'flags' and 'noblock' that are
merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)'

As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags'
into 'flags' and 'noblock' with finally obsolete bit operations like this:

skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc);

And this is not even done consistently with the 'flags' parameter.

This patch removes the obsolete and costly splitting into two parameters
and only performs bit operations when really needed on the caller side.

One missing conversion thankfully reported by kernel test robot. I missed
to enable kunit tests to build the mctp code.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock: each transport cycles only on its own sockets

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transp

vsock: each transport cycles only on its own sockets

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.

There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.

Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.

[1] https://android.googlesource.com/device/google/cuttlefish/

Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

vsock: each transport cycles only on its own sockets

[ Upstream commit 8e6ed963763fe21429eabfc76c69ce2b0163a3dd ]

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a

vsock: each transport cycles only on its own sockets

[ Upstream commit 8e6ed963763fe21429eabfc76c69ce2b0163a3dd ]

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.

There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.

Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.

[1] https://android.googlesource.com/device/google/cuttlefish/

Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: sock: introduce sk_error_report

This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, f

net: sock: introduce sk_error_report

This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock/vmci: remove the repeated word "be"

Remove the repeated word "be".

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock/vmci: Remove redundant assignment to err

Variable 'err' is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can b

vsock/vmci: Remove redundant assignment to err

Variable 'err' is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Clean up the following clang-analyzer warning:

net/vmw_vsock/vmci_transport.c:948:2: warning: Value stored to 'err' is
never read [clang-analyzer-deadcode.DeadStores]

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock/vmci: log once the failed queue pair allocation

VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.

VMware Tools can repeatedly try to create a vsock c

vsock/vmci: log once the failed queue pair allocation

VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.

VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:

qp_alloc_hypercall result = -20
Could not attach to queue pair with -20

"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c3307
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.

Since the error message can be useful in some cases, print it only once.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock/vmci: log once the failed queue pair allocation

[ Upstream commit e16edc99d658cd41c60a44cc14d170697aa3271f ]

VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT)

vsock/vmci: log once the failed queue pair allocation

[ Upstream commit e16edc99d658cd41c60a44cc14d170697aa3271f ]

VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.

VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:

qp_alloc_hypercall result = -20
Could not attach to queue pair with -20

"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c3307
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.

Since the error message can be useful in some cases, print it only once.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

vsock/vmci: make vmci_vsock_transport_cb() static

Fix the following gcc-9.3 warning when building with 'make W=1':
net/vmw_vsock/vmci_transport.c:2058:6: warning: no previous prototype
f

vsock/vmci: make vmci_vsock_transport_cb() static

Fix the following gcc-9.3 warning when building with 'make W=1':
net/vmw_vsock/vmci_transport.c:2058:6: warning: no previous prototype
for ‘vmci_vsock_transport_cb’ [-Wmissing-prototypes]
2058 | void vmci_vsock_transport_cb(bool is_host)
| ^~~~~~~~~~~~~~~~~~~~~~~

Fixes: b1bba80a4376 ("vsock/vmci: register vmci_transport only when VMCI guest/host are active")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock: add VMADDR_CID_LOCAL definition

The VMADDR_CID_RESERVED (1) was used by VMCI, but now it is not
used anymore, so we can reuse it for local communication
(loopback) adding the new well-know CI

vsock: add VMADDR_CID_LOCAL definition

The VMADDR_CID_RESERVED (1) was used by VMCI, but now it is not
used anymore, so we can reuse it for local communication
(loopback) adding the new well-know CID: VMADDR_CID_LOCAL.

Cc: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock: prevent transport modules unloading

This patch adds 'module' member in the 'struct vsock_transport'
in order to get/put the transport module. This prevents the
module unloading while sockets

vsock: prevent transport modules unloading

This patch adds 'module' member in the 'struct vsock_transport'
in order to get/put the transport module. This prevents the
module unloading while sockets are assigned to it.

We increase the module refcnt when a socket is assigned to a
transport, and we decrease the module refcnt when the socket
is destructed.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock/vmci: register vmci_transport only when VMCI guest/host are active

To allow other transports to be loaded with vmci_transport,
we register the vmci_transport as G2H or H2G only when a VMCI gue

vsock/vmci: register vmci_transport only when VMCI guest/host are active

To allow other transports to be loaded with vmci_transport,
we register the vmci_transport as G2H or H2G only when a VMCI guest
or host is active.

To do that, this patch adds a callback registered in the vmci driver
that will be called when the host or guest becomes active.
This callback will register the vmci_transport in the VSOCK core.

Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock: add multi-transports support

This patch adds the support of multiple transports in the
VSOCK core.

With the multi-transports support, we can use vsock with nested VMs
(using also different h

vsock: add multi-transports support

This patch adds the support of multiple transports in the
VSOCK core.

With the multi-transports support, we can use vsock with nested VMs
(using also different hypervisors) loading both guest->host and
host->guest transports at the same time.

Major changes:
- vsock core module can be loaded regardless of the transports
- vsock_core_init() and vsock_core_exit() are renamed to
vsock_core_register() and vsock_core_unregister()
- vsock_core_register() has a feature parameter (H2G, G2H, DGRAM)
to identify which directions the transport can handle and if it's
support DGRAM (only vmci)
- each stream socket is assigned to a transport when the remote CID
is set (during the connect() or when we receive a connection request
on a listener socket).
The remote CID is used to decide which transport to use:
- remote CID <= VMADDR_CID_HOST will use guest->host transport;
- remote CID == local_cid (guest->host transport) will use guest->host
transport for loopback (host->guest transports don't support loopback);
- remote CID > VMADDR_CID_HOST will use host->guest transport;
- listener sockets are not bound to any transports since no transport
operations are done on it. In this way we can create a listener
socket, also if the transports are not loaded or with VMADDR_CID_ANY
to listen on all transports.
- DGRAM sockets are handled as before, since only the vmci_transport
provides this feature.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock: add vsock_create_connected() called by transports

All transports call __vsock_create() with the same parameters,
most of them depending on the parent socket. In order to simplify
the VSOCK co

vsock: add vsock_create_connected() called by transports

All transports call __vsock_create() with the same parameters,
most of them depending on the parent socket. In order to simplify
the VSOCK core APIs exposed to the transports, this patch adds
the vsock_create_connected() callable from transports to create
a new socket when a connection request is received.
We also unexported the __vsock_create().

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock: handle buffer_size sockopts in the core

virtio_transport and vmci_transport handle the buffer_size
sockopts in a very similar way.

In order to support multiple transports, this patch moves t

vsock: handle buffer_size sockopts in the core

virtio_transport and vmci_transport handle the buffer_size
sockopts in a very similar way.

In order to support multiple transports, this patch moves this
handling in the core to allow the user to change the options
also if the socket is not yet assigned to any transport.

This patch also adds the '.notify_buffer_size' callback in the
'struct virtio_transport' in order to inform the transport,
when the buffer_size is changed by the user. It is also useful
to limit the 'buffer_size' requested (e.g. virtio transports).

Acked-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock/vmci: remove unused VSOCK_DEFAULT_CONNECT_TIMEOUT

The VSOCK_DEFAULT_CONNECT_TIMEOUT definition was introduced with
commit d021c344051af ("VSOCK: Introduce VM Sockets"), but it is
never used in

vsock/vmci: remove unused VSOCK_DEFAULT_CONNECT_TIMEOUT

The VSOCK_DEFAULT_CONNECT_TIMEOUT definition was introduced with
commit d021c344051af ("VSOCK: Introduce VM Sockets"), but it is
never used in the net/vmw_vsock/vmci_transport.c.

VSOCK_DEFAULT_CONNECT_TIMEOUT is used and defined in
net/vmw_vsock/af_vsock.c

Cc: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: use helpers to change sk_ack_backlog

Writers are holding a lock, but many readers do not.

Following patch will add appropriate barriers in
sk_acceptq_removed() and sk_acceptq_added().

Signed-

net: use helpers to change sk_ack_backlog

Writers are holding a lock, but many readers do not.

Following patch will add appropriate barriers in
sk_acceptq_removed() and sk_acceptq_added().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 321

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 321

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 and no later version this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 33 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000435.345978407@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

vsock: cope with memory allocation failure at socket creation time

In the unlikely event that the kmalloc call in vmci_transport_socket_init()
fails, we end-up calling vmci_transport_destruct() with

vsock: cope with memory allocation failure at socket creation time

In the unlikely event that the kmalloc call in vmci_transport_socket_init()
fails, we end-up calling vmci_transport_destruct() with a NULL vmci_trans()
and oopsing.

This change addresses the above explicitly checking for zero vmci_trans()
at destruction time.

Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

VSOCK: Send reset control packet when socket is partially bound

If a server side socket is bound to an address, but not in the listening
state yet, incoming connection requests should receive a rese

VSOCK: Send reset control packet when socket is partially bound

If a server side socket is bound to an address, but not in the listening
state yet, incoming connection requests should receive a reset control
packet in response. However, the function used to send the reset
silently drops the reset packet if the sending socket isn't bound
to a remote address (as is the case for a bound socket not yet in
the listening state). This change fixes this by using the src
of the incoming packet as destination for the reset packet in
this case.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vsock: split dwork to avoid reinitializations

syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():

ODEBUG: init active (active state 0) object type: timer_list hi

vsock: split dwork to avoid reinitializations

syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():

ODEBUG: init active (active state 0) object type: timer_list hint:
delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414
WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329
debug_print_object+0x16a/0x210 lib/debugobjects.c:326

The pattern is apparently wrong, we should only initialize
the dealyed work once and could repeatly schedule it. So we
have to move out the initializations to allocation side.
And to avoid confusion, we can split the shared dwork
into two, instead of re-using the same one.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com>
Cc: Andy king <acking@vmware.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...