ipvs: increase ip_vs_conn_tab_bits range for 64BIT

Current range [8, 20] is set purely due to historical reasons
because at the time, ~1M (2^20) was considered sufficient.
With this change, 27 is th

ipvs: increase ip_vs_conn_tab_bits range for 64BIT

Current range [8, 20] is set purely due to historical reasons
because at the time, ~1M (2^20) was considered sufficient.
With this change, 27 is the upper limit for 64-bit, 20 otherwise.

Previous change regarding this limit is here.

Link: https://lore.kernel.org/all/86eabeb9dd62aebf1e2533926fdd13fed48bab1f.1631289960.git.aclaudi@redhat.com/T/#u

Signed-off-by: Abhijeet Rastogi <abhijeet.1989@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: Remove leading spaces in Kconfig

Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

$ find net/netfilter -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+

netfilter: Remove leading spaces in Kconfig

Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

$ find net/netfilter -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

net: remove redundant 'depends on NET'

These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.

Remove 'depends on NET', which we know it is already met.

Signed-off-by: Masa

net: remove redundant 'depends on NET'

These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.

Remove 'depends on NET', which we know it is already met.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

ipvs: add weighted random twos choice algorithm

Adds the random twos choice load-balancing algorithm. The algorithm will
pick two random servers based on weights. Then select the server with
the lea

ipvs: add weighted random twos choice algorithm

Adds the random twos choice load-balancing algorithm. The algorithm will
pick two random servers based on weights. Then select the server with
the least amount of connections normalized by weight. The algorithm
avoids the "herd behavior" problem. The algorithm comes from a paper
by Michael Mitzenmacher available here
http://www.eecs.harvard.edu/~michaelm/NEWWORK/postscripts/twosurvey.pdf

Signed-off-by: Darby Payne <darby.payne@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

ipvs: remove dependency on ip6_tables

This dependency was added because ipv6_find_hdr was in iptables specific
code but is no longer required

Fixes: f8f626754ebe ("ipv6: Move ipv6_find_hdr() out of

ipvs: remove dependency on ip6_tables

This dependency was added because ipv6_find_hdr was in iptables specific
code but is no longer required

Fixes: f8f626754ebe ("ipv6: Move ipv6_find_hdr() out of Netfilter code.")
Fixes: 63dca2c0b0e7 ("ipvs: Fix faulty IPv6 extension header handling in IPVS")
Signed-off-by: Yaroslav Bolyukin <iam@lach.pw>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasi

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

show more ...

net: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig

Signed-off-by: Krzysztof

net: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ipvs: fix dependency on nf_defrag_ipv6

ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation,
but lacks proper Kconfig dependencies and does not explicitly
request defrag features.

As a

ipvs: fix dependency on nf_defrag_ipv6

ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation,
but lacks proper Kconfig dependencies and does not explicitly
request defrag features.

As a result, if netfilter hooks are not loaded, when IPv6 fragmented
packet are handled by ipvs only the first fragment makes through.

Fix it properly declaring the dependency on Kconfig and registering
netfilter hooks on ip_vs_add_service() and ip_vs_new_dest().

Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

treewide: convert ISO_8859-1 text comments to utf-8

Almost all files in the kernel are either plain text or UTF-8 encoded. A
couple however are ISO_8859-1, usually just a few characters in a C
comm

treewide: convert ISO_8859-1 text comments to utf-8

Almost all files in the kernel are either plain text or UTF-8 encoded. A
couple however are ISO_8859-1, usually just a few characters in a C
comments, for historic reasons.

This converts them all to UTF-8 for consistency.

Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion]
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Rob Herring <robh@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

netfilter: ipvs: Add configurations of Maglev hashing

To build the maglev hashing scheduler, add some configuration
to Kconfig and Makefile.

- The compile configurations of MH are added to the Kco

netfilter: ipvs: Add configurations of Maglev hashing

To build the maglev hashing scheduler, add some configuration
to Kconfig and Makefile.

- The compile configurations of MH are added to the Kconfig.

- The MH build rule is added to the Makefile.

Signed-off-by: Inju Song <inju.song@navercorp.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>

show more ...

ipvs: Add ovf scheduler

The weighted overflow scheduling algorithm directs network connections
to the server with the highest weight that is currently available
and overflows to the next when active

ipvs: Add ovf scheduler

The weighted overflow scheduling algorithm directs network connections
to the server with the highest weight that is currently available
and overflows to the next when active connections exceed the node's weight.

Signed-off-by: Raducu Deaconu <rhadoo.io88@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>

show more ...

ipvs: Add simple weighted failover scheduler

Add simple weighted IPVS failover support to the Linux kernel. All
other scheduling modules implement some form of load balancing, while
this offers a si

ipvs: Add simple weighted failover scheduler

Add simple weighted IPVS failover support to the Linux kernel. All
other scheduling modules implement some form of load balancing, while
this offers a simple failover solution. Connections are directed to
the appropriate server based solely on highest weight value and server
availability. Tested functionality with keepalived.

Signed-off-by: Kenny Mathis <kmathis@chokepoint.net>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>

show more ...

ipvs: Complete IPv6 fragment handling for IPVS

IPVS now supports fragmented packets, with support from nf_conntrack_reasm.c

Based on patch from: Hans Schillstrom.

IPVS do like conntrack i.e. use t

ipvs: Complete IPv6 fragment handling for IPVS

IPVS now supports fragmented packets, with support from nf_conntrack_reasm.c

Based on patch from: Hans Schillstrom.

IPVS do like conntrack i.e. use the skb->nfct_reasm
(i.e. when all fragments is collected, nf_ct_frag6_output()
starts a "re-play" of all fragments into the interrupted
PREROUTING chain at prio -399 (NF_IP6_PRI_CONNTRACK_DEFRAG+1)
with nfct_reasm pointing to the assembled packet.)

Notice, module nf_defrag_ipv6 must be loaded for this to work.
Report unhandled fragments, and recommend user to load nf_defrag_ipv6.

To handle fw-mark for fragments. Add a new IPVS hook into prerouting
chain at prio -99 (NF_IP6_PRI_NAT_DST+1) to catch fragments, and copy
fw-mark info from the first packet with an upper layer header.

IPv6 fragment handling should be the last thing on the IPVS IPv6
missing support list.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>

show more ...

ipvs: Fix faulty IPv6 extension header handling in IPVS

IPv6 packets can contain extension headers, thus its wrong to assume
that the transport/upper-layer header, starts right after (struct
ipv6hdr

ipvs: Fix faulty IPv6 extension header handling in IPVS

IPv6 packets can contain extension headers, thus its wrong to assume
that the transport/upper-layer header, starts right after (struct
ipv6hdr) the IPv6 header. IPVS uses this false assumption, and will
write SNAT & DNAT modifications at a fixed pos which will corrupt the
message.

To fix this, proper header position must be found before modifying
packets. Introducing ip_vs_fill_iph_skb(), which uses ipv6_find_hdr()
to skip the exthdrs. It finds (1) the transport header offset, (2) the
protocol, and (3) detects if the packet is a fragment.

Note, that fragments in IPv6 is represented via an exthdr. Thus, this
is detected while skipping through the exthdrs.

This patch depends on commit 84018f55a:
"netfilter: ip6_tables: add flags parameter to ipv6_find_hdr()"
This also adds a dependency to ip6_tables.

Originally based on patch from: Hans Schillstrom

kABI notes:
Changing struct ip_vs_iphdr is a potential minor kABI breaker,
because external modules can be compiled with another version of
this struct. This should not matter, as they would most-likely
be using a compiled-in version of ip_vs_fill_iphdr(). When
recompiled, they will notice ip_vs_fill_iphdr() no longer exists,
and they have to used ip_vs_fill_iph_skb() instead.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>

show more ...

ipvs: ip_vs_ftp depends on nf_conntrack_ftp helper

The FTP application indirectly depends on the
nf_conntrack_ftp helper for proper NAT support. If the
module is not loaded, IPVS can resize the pac

ipvs: ip_vs_ftp depends on nf_conntrack_ftp helper

The FTP application indirectly depends on the
nf_conntrack_ftp helper for proper NAT support. If the
module is not loaded, IPVS can resize the packets for the
command connection, eg. PASV response but the SEQ adjustment
logic in ipv4_confirm is not called without helper.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>

show more ...

IPVS: Modify the SH scheduler to use weights

Modify the algorithm to build the source hashing hash table to add
extra slots for destinations with higher weight. This has the effect
of allowing an IP

IPVS: Modify the SH scheduler to use weights

Modify the algorithm to build the source hashing hash table to add
extra slots for destinations with higher weight. This has the effect
of allowing an IPVS SH user to give more connections to hosts that
have been configured to have a higher weight.

The reason for the Kconfig change is because the size of the hash table
becomes more relevant/important if you decide to use the weights in the
manner this patch lets you. It would be conceivable that someone might
need to increase the size of that table to accommodate their
configuration, so it will be handy to be able to do that through the
regular configuration system instead of editing the source.

Signed-off-by: Michael Maxim <mike@okcupid.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

drop "select GCD" from three Kconfig files

There is no Kconfig symbol named GCD. The three select statements for
that symbol are nops. Drop these.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Sig

drop "select GCD" from three Kconfig files

There is no Kconfig symbol named GCD. The three select statements for
that symbol are nops. Drop these.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

netfilter: fix IP_VS dependencies

When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols.
Therefore IP_VS can't be linked statically when conntrack
is built modular.

Reported-by: Justin P. Matt

netfilter: fix IP_VS dependencies

When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols.
Therefore IP_VS can't be linked statically when conntrack
is built modular.

Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

IPVS: sip persistence engine

Add the SIP callid as a key for persistence.

This allows multiple connections from the same IP address to be
differentiated on the basis of the callid.

When used in co

IPVS: sip persistence engine

Add the SIP callid as a key for persistence.

This allows multiple connections from the same IP address to be
differentiated on the basis of the callid.

When used in conjunction with the persistence mask, it allows connections
from different IP addresses to be aggregated on the basis of the callid.

It is envisaged that a persistence mask of 0.0.0.0 will be a useful
setting. That is, ignore the source IP address when checking for
persistence.

It is envisaged that this option will be used in conjunction with
one-packet scheduling.

This only works with UDP and cannot be made to work with TCP
within the current framework.

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>

show more ...

ipvs: netfilter connection tracking changes

Add more code to IPVS to work with Netfilter connection
tracking and fix some problems.

- Allow IPVS to be compiled without connection tracking as in
2.

ipvs: netfilter connection tracking changes

Add more code to IPVS to work with Netfilter connection
tracking and fix some problems.

- Allow IPVS to be compiled without connection tracking as in
2.6.35 and before. This can avoid keeping conntracks for all
IPVS connections because this costs memory. ip_vs_ftp still
depends on connection tracking and NAT as implemented for 2.6.36.

- Add sysctl var "conntrack" to enable connection tracking for
all IPVS connections. For loaded IPVS directors it needs
tuning of nf_conntrack_max limit.

- Add IP_VS_CONN_F_NFCT connection flag to request the connection
to use connection tracking. This allows user space to provide this
flag, for example, in dest->conn_flags. This can be useful to
request connection tracking per real server instead of forcing it
for all connections with the "conntrack" sysctl. This flag is
set currently only by ip_vs_ftp and of course by "conntrack" sysctl.

- Add ip_vs_nfct.c file to hold all connection tracking code,
by this way main code should not depend of netfilter conntrack
support.

- Return back the ip_vs_post_routing handler as in 2.6.35 and use
skb->ipvs_property=1 to allow IPVS to work without connection
tracking

Connection tracking:

- most of the code is already in 2.6.36-rc

- alter conntrack reply tuple for LVS-NAT connections when first packet
from client is forwarded and conntrack state is NEW or RELATED.
Additionally, alter reply for RELATED connections from real server,
again for packet in original direction.

- add IP_VS_XMIT_TUNNEL to confirm conntrack (without altering
reply) for LVS-TUN early because we want to call nf_reset. It is
needed because we add IPIP header and the original conntrack
should be preserved, not destroyed. The transmitted IPIP packets
can reuse same conntrack, so we do not set skb->ipvs_property.

- try to destroy conntrack when the IPVS connection is destroyed.
It is not fatal if conntrack disappears before that, it depends
on the used timers.

Fix problems from long time:

- add skb->ip_summed = CHECKSUM_NONE for the LVS-TUN transmitters

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Patrick McHardy <kaber@trash.net>

show more ...

ipvs: remove EXPERIMENTAL tag

IPVS was merged into the kernel quite a long time ago and
has been seeing wide-spread production use for even longer.

It seems appropriate for it to be no longer tagge

ipvs: remove EXPERIMENTAL tag

IPVS was merged into the kernel quite a long time ago and
has been seeing wide-spread production use for even longer.

It seems appropriate for it to be no longer tagged as EXPERIMENTAL

Signed-off-as: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>

show more ...

IPVS: make FTP work with full NAT support

Use nf_conntrack/nf_nat code to do the packet mangling and the TCP
sequence adjusting. The function 'ip_vs_skb_replace' is now dead
code, so it is removed.

IPVS: make FTP work with full NAT support

Use nf_conntrack/nf_nat code to do the packet mangling and the TCP
sequence adjusting. The function 'ip_vs_skb_replace' is now dead
code, so it is removed.

To SNAT FTP, use something like:

% iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \
--vport 21 -j SNAT --to-source 192.168.10.10
and for the data connections in passive mode:

% iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \
--vportctl 21 -j SNAT --to-source 192.168.10.10
using '-m state --state RELATED' would also works.

Make sure the kernel modules ip_vs_ftp, nf_conntrack_ftp, and
nf_nat_ftp are loaded.

[ up-port and minor fixes by Simon Horman <horms@verge.net.au> ]
Signed-off-by: Hannes Eder <heder@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>

show more ...

IPVS: make friends with nf_conntrack

Update the nf_conntrack tuple in reply direction, as we will see
traffic from the real server (RIP) to the client (CIP). Once this is
done we can use netfilters

IPVS: make friends with nf_conntrack

Update the nf_conntrack tuple in reply direction, as we will see
traffic from the real server (RIP) to the client (CIP). Once this is
done we can use netfilters SNAT in POSTROUTING, especially with
xt_ipvs, to do source NAT, e.g.:

% iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 --vport 80 \
-j SNAT --to-source 192.168.10.10

[ minor fixes by Simon Horman <horms@verge.net.au> ]
Signed-off-by: Hannes Eder <heder@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>

show more ...

ipvs: Kconfig cleanup

IP_VS_PROTO_AH_ESP should be set iff either of IP_VS_PROTO_{AH,ESP} is
selected. Express this with standard kconfig syntax.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-

ipvs: Kconfig cleanup

IP_VS_PROTO_AH_ESP should be set iff either of IP_VS_PROTO_{AH,ESP} is
selected. Express this with standard kconfig syntax.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>

show more ...