wifi: mac80211: add consistency check for compat chandef

Add NULL check for compat variable to avoid crash in
cfg80211_chandef_compatible() if it got called with
some mixed up channel context where

wifi: mac80211: add consistency check for compat chandef

Add NULL check for compat variable to avoid crash in
cfg80211_chandef_compatible() if it got called with
some mixed up channel context where not all the users
compatible with each other, which shouldn't happen.

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.ae0f10dfd36b.Iea98c74aeb87bf6ef49f6d0c8687bba0dbea2abd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: use wiphy work for channel switch

Channel switch obviously must be handled per link, and we
have a (potential) deadlock when canceling that work. Use
the new delayed wiphy work to ha

wifi: mac80211: use wiphy work for channel switch

Channel switch obviously must be handled per link, and we
have a (potential) deadlock when canceling that work. Use
the new delayed wiphy work to handle this instead and get
rid of the explicit timer that way too.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: consistently use u64 for BSS changes

Currently, enum ieee80211_bss_change has more than 32 flags.
Change the type of the corresponding variables from u32 to u64.

Signed-off-by: Anja

wifi: mac80211: consistently use u64 for BSS changes

Currently, enum ieee80211_bss_change has more than 32 flags.
Change the type of the corresponding variables from u32 to u64.

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.10354a05eaf1.If19359262fe2728dd523ea6d7c3aa7dc50940411@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: recalc chanctx mindef before assigning

When we allocate a new channel context, or find an existing one
that is compatible, we currently assign it to a link before its
mindef is updat

wifi: mac80211: recalc chanctx mindef before assigning

When we allocate a new channel context, or find an existing one
that is compatible, we currently assign it to a link before its
mindef is updated. This leads to strange situations, especially
in link switching where you switch to an 80 MHz link and expect
it to be active immediately, but the mindef is still configured
to 20 MHz while assigning. Also, it's strange that the chandef
passed to the assign method's argument is wider than the one in
the context.

Fix this by calculating the mindef with the new link considered
before calling the driver.

In particular, this fixes an iwlwifi problem during link switch
where the firmware would assert because the (link) station that
was added for the AP is configured to transmit at a bandwidth
that's wider than the channel context that it's configured on.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-5-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: consider reserved chanctx for mindef

When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reser

wifi: mac80211: consider reserved chanctx for mindef

When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reserved for before we assign it, so it
can be used directly with the correct min channel width.

Fix the code to - optionally - consider that, and use that
option just before doing the reassignment.

Also, when considering channel context reservations, we
should only consider the one link we're currently working with.
Change the boolean argument to a link pointer to do that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-4-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: simplify chanctx allocation

There's no need to call ieee80211_recalc_chanctx_min_def()
since it cannot and won't call the driver anyway; just use
_ieee80211_recalc_chanctx_min_def()

wifi: mac80211: simplify chanctx allocation

There's no need to call ieee80211_recalc_chanctx_min_def()
since it cannot and won't call the driver anyway; just use
_ieee80211_recalc_chanctx_min_def() instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-3-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: mlme: handle EHT channel puncturing

Handle the Puncturing info received from the AP in the
EHT Operation element in beacons.

If the info is invalid:
- during association: disable E

wifi: mac80211: mlme: handle EHT channel puncturing

Handle the Puncturing info received from the AP in the
EHT Operation element in beacons.

If the info is invalid:
- during association: disable EHT connection for the AP
- after association: disconnect

This commit includes many (internal) bugfixes and spec
updates various people.

Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20230127123930.4fbc74582331.I3547481d49f958389f59dfeba3fcc75e72b0aa6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: isolate driver from inactive links

In order to let the driver select active links and properly
make multi-link connections, as a first step isolate the
driver from inactive links, an

wifi: mac80211: isolate driver from inactive links

In order to let the driver select active links and properly
make multi-link connections, as a first step isolate the
driver from inactive links, and set the active links to be
only the association link for client-side interfaces. For
AP side nothing changes since APs always have to have all
their links active.

To simplify things, update the for_each_sta_active_link()
API to include the appropriate vif pointer.

This also implies not allocating a chanctx for an inactive
link, which requires a few more changes.

Since we now no longer try to program multiple links to the
driver, remove the check in the MLME code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: replace link_id with link_conf in switch/(un)assign_vif_chanctx()

Since mac80211 already has a protected pointer to link_conf,
pass it to the driver to avoid additional RCU locking.

wifi: mac80211: replace link_id with link_conf in switch/(un)assign_vif_chanctx()

Since mac80211 already has a protected pointer to link_conf,
pass it to the driver to avoid additional RCU locking.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: don't check carrier in chanctx code

We check here that we don't enable TX (netif_carrier_ok())
before we actually start using some channel context, but to
our knowledge this check ha

wifi: mac80211: don't check carrier in chanctx code

We check here that we don't enable TX (netif_carrier_ok())
before we actually start using some channel context, but to
our knowledge this check has never triggered, and with MLO
it's just wrong since links can be added and removed much
more dynamically than before.

Simply remove the checks, there's no really good way to do
anything that would replace them.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: tighten locking check

When we remove a link that doesn't have a channel context,
we don't really need the local->mtx locking. Tighten the
check here.

Signed-off-by: Johannes Berg <j

wifi: mac80211: tighten locking check

When we remove a link that doesn't have a channel context,
we don't really need the local->mtx locking. Tighten the
check here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: mlme: first adjustments for MLO

Do the first adjustments in the client-side code to pass
the link pointer (instead of sdata) to most places etc.

This is just preparation, so the rea

wifi: mac80211: mlme: first adjustments for MLO

Do the first adjustments in the client-side code to pass
the link pointer (instead of sdata) to most places etc.

This is just preparation, so the real MLO patches become
smaller.

Note that this isn't complete, notably there are still
quite a few references to sta->deflink and sta->sta.deflink.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: RCU-ify link/link_conf pointers

Since links can be added and removed dynamically, we need to
somehow protect the sdata->link[] and vif->link_conf[] array
pointers from disappearing w

wifi: mac80211: RCU-ify link/link_conf pointers

Since links can be added and removed dynamically, we need to
somehow protect the sdata->link[] and vif->link_conf[] array
pointers from disappearing when accessing them without locks.
RCU-ify the pointers to achieve this, which requires quite a
bit of rework.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: RCU-ify link STA pointers

We need to be able to access these in a race-free way under
traffic while adding/removing them, so RCU-ify the pointers.
This requires passing a link_sta to

wifi: mac80211: RCU-ify link STA pointers

We need to be able to access these in a race-free way under
traffic while adding/removing them, so RCU-ify the pointers.
This requires passing a link_sta to a lot of functions so
we don't have to do the RCU handling everywhere.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: make channel context code MLO-aware

Make the channel context code MLO aware, along with some
functions that it uses, so that the chan.c file is now
MLD-clean and no longer uses defli

wifi: mac80211: make channel context code MLO-aware

Make the channel context code MLO aware, along with some
functions that it uses, so that the chan.c file is now
MLD-clean and no longer uses deflink/bss_conf/etc.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: split bss_info_changed method

Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u6

wifi: mac80211: split bss_info_changed method

Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: reorg some iface data structs for MLD

Start reorganizing interface related data structures toward
MLD. The most complex part here is for the keys, since we
have to split the various

wifi: mac80211: reorg some iface data structs for MLD

Start reorganizing interface related data structures toward
MLD. The most complex part here is for the keys, since we
have to split the various kinds of GTKs off to the link but
still need to use (for WEP) the other keys as a fallback
even for multicast frames.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: move interface config to new struct

We'll use bss_conf for per-link configuration later, so
move out all the non-link-specific data out into a new
struct ieee80211_vif_cfg used in th

wifi: mac80211: move interface config to new struct

We'll use bss_conf for per-link configuration later, so
move out all the non-link-specific data out into a new
struct ieee80211_vif_cfg used in the vif.

Some adjustments were done with the following spatch:

@@
expression sdata;
struct ieee80211_vif *vifp;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
(
-sdata->vif.bss_conf.var
+sdata->vif.cfg.var
|
-vifp->bss_conf.var
+vifp->cfg.var
)

@bss_conf@
struct ieee80211_bss_conf *bss_conf;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
-bss_conf->var
+vif_cfg->var

(though more manual fixups were needed, e.g. replacing
"vif_cfg->" by "vif->cfg." in many files.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: move some future per-link data to bss_conf

To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.

Most transformatio

wifi: mac80211: move some future per-link data to bss_conf

To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.

Most transformations were done with the following spatch:

@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var

@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: fix use-after-free in chanctx code

In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE,

wifi: mac80211: fix use-after-free in chanctx code

In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.

However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.

Cc: stable@vger.kernel.org
Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2afdb153b101124c821e5@changeid

show more ...

mac80211: prepare sta handling for MLO support

Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee8

mac80211: prepare sta handling for MLO support

Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.

With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.

To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.

For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.

For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.

Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.

Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.

@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@

(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)

@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@

(
si->
- var
+ deflink.var
)

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: Add initial support for EHT and 320 MHz channels

Add initial support for EHT and 320 MHz bandwidth in mac80211.

As a new IEEE80211_STA_RX_BW_320 is added to
enum ieee80211_sta_rx_bandwidt

mac80211: Add initial support for EHT and 320 MHz channels

Add initial support for EHT and 320 MHz bandwidth in mac80211.

As a new IEEE80211_STA_RX_BW_320 is added to
enum ieee80211_sta_rx_bandwidth, update the drivers to avoid
compilation warnings.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://lore.kernel.org/r/20220214173004.0f144cc0bba6.Iad18111264da87eed5fd7b017f0cc6e58c604e07@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: fix use-after-free in chanctx code

commit 2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.

In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context

wifi: mac80211: fix use-after-free in chanctx code

commit 2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.

In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.

However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.

Cc: stable@vger.kernel.org
Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2afdb153b101124c821e5@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

wifi: mac80211: fix use-after-free in chanctx code

commit 2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.

In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context

wifi: mac80211: fix use-after-free in chanctx code

commit 2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.

In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.

However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.

Cc: stable@vger.kernel.org
Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2afdb153b101124c821e5@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

mac80211: handle rate control (RC) racing with chanctx definition

chanctx represents the current phy configuration and rate scale uses
it for achieving max throughput, so if phy changes bandwidth to

mac80211: handle rate control (RC) racing with chanctx definition

chanctx represents the current phy configuration and rate scale uses
it for achieving max throughput, so if phy changes bandwidth to narrow
bandwidth, RC should be _first_ updated to avoid using the wider bandwidth
before updating the phy, and vice versa.

We assume in the patch that station interface is always updated before
updating phy context by calling ieee80211_vif_update_chandef.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.fc4e24496aa2.Ic40ea947c2f65739ea4b5fe3babd0a544240ced6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...