net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions t

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.

This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.

This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.

To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.

Reproduction example:

Endpoint configuration example (fou + local address bind)

# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1

Netperf TCP_STREAM result on net-next before patch is applied:

net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.28 2.37

net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2745.06

patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2877.38

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions t

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.

This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.

This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.

To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.

Reproduction example:

Endpoint configuration example (fou + local address bind)

# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1

Netperf TCP_STREAM result on net-next before patch is applied:

net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.28 2.37

net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2745.06

patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2877.38

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions t

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.

This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.

This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.

To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.

Reproduction example:

Endpoint configuration example (fou + local address bind)

# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1

Netperf TCP_STREAM result on net-next before patch is applied:

net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.28 2.37

net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2745.06

patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2877.38

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions t

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.

This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.

This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.

To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.

Reproduction example:

Endpoint configuration example (fou + local address bind)

# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1

Netperf TCP_STREAM result on net-next before patch is applied:

net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.28 2.37

net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2745.06

patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2877.38

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions t

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.

This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.

This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.

To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.

Reproduction example:

Endpoint configuration example (fou + local address bind)

# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1

Netperf TCP_STREAM result on net-next before patch is applied:

net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.28 2.37

net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2745.06

patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2877.38

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions t

net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb

[ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ]

Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.

This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.

This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.

To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.

Reproduction example:

Endpoint configuration example (fou + local address bind)

# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1

Netperf TCP_STREAM result on net-next before patch is applied:

net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.28 2.37

net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2745.06

patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec

131072 16384 16384 5.01 2877.38

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udp: preserve the connected status if only UDP cmsg

commit 680d11f6e5427b6af1321932286722d24a8b16c1 upstream.

If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to

udp: preserve the connected status if only UDP cmsg

commit 680d11f6e5427b6af1321932286722d24a8b16c1 upstream.

If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to 0. Otherwise it stops
the connected socket from using the cached route.

Fixes: 2e8de8576343 ("udp: add gso segment cmsg")
Signed-off-by: Yick Xie <yick.xie@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

udp: preserve the connected status if only UDP cmsg

commit 680d11f6e5427b6af1321932286722d24a8b16c1 upstream.

If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to

udp: preserve the connected status if only UDP cmsg

commit 680d11f6e5427b6af1321932286722d24a8b16c1 upstream.

If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to 0. Otherwise it stops
the connected socket from using the cached route.

Fixes: 2e8de8576343 ("udp: add gso segment cmsg")
Signed-off-by: Yick Xie <yick.xie@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

udp: preserve the connected status if only UDP cmsg

commit 680d11f6e5427b6af1321932286722d24a8b16c1 upstream.

If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to

udp: preserve the connected status if only UDP cmsg

commit 680d11f6e5427b6af1321932286722d24a8b16c1 upstream.

If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to 0. Otherwise it stops
the connected socket from using the cached route.

Fixes: 2e8de8576343 ("udp: add gso segment cmsg")
Signed-off-by: Yick Xie <yick.xie@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

udp: do not accept non-tunnel GSO skbs landing in a tunnel

commit 3d010c8031e39f5fa1e8b13ada77e0321091011f upstream.

When rx-udp-gro-forwarding is enabled UDP packets might be GROed when
being forw

udp: do not accept non-tunnel GSO skbs landing in a tunnel

commit 3d010c8031e39f5fa1e8b13ada77e0321091011f upstream.

When rx-udp-gro-forwarding is enabled UDP packets might be GROed when
being forwarded. If such packets might land in a tunnel this can cause
various issues and udp_gro_receive makes sure this isn't the case by
looking for a matching socket. This is performed in
udp4/6_gro_lookup_skb but only in the current netns. This is an issue
with tunneled packets when the endpoint is in another netns. In such
cases the packets will be GROed at the UDP level, which leads to various
issues later on. The same thing can happen with rx-gro-list.

We saw this with geneve packets being GROed at the UDP level. In such
case gso_size is set; later the packet goes through the geneve rx path,
the geneve header is pulled, the offset are adjusted and frag_list skbs
are not adjusted with regard to geneve. When those skbs hit
skb_fragment, it will misbehave. Different outcomes are possible
depending on what the GROed skbs look like; from corrupted packets to
kernel crashes.

One example is a BUG_ON[1] triggered in skb_segment while processing the
frag_list. Because gso_size is wrong (geneve header was pulled)
skb_segment thinks there is "geneve header size" of data in frag_list,
although it's in fact the next packet. The BUG_ON itself has nothing to
do with the issue. This is only one of the potential issues.

Looking up for a matching socket in udp_gro_receive is fragile: the
lookup could be extended to all netns (not speaking about performances)
but nothing prevents those packets from being modified in between and we
could still not find a matching socket. It's OK to keep the current
logic there as it should cover most cases but we also need to make sure
we handle tunnel packets being GROed too early.

This is done by extending the checks in udp_unexpected_gso: GSO packets
lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must
be segmented.

[1] kernel BUG at net/core/skbuff.c:4408!
RIP: 0010:skb_segment+0xd2a/0xf70
__udp_gso_segment+0xaa/0x560

Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Fixes: 36707061d6ba ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

bpf: Propagate modified uaddrlen from cgroup sockaddr programs

[ Upstream commit fefba7d1ae198dcbf8b3b432de46a4e29f8dbd8c ]

As prep for adding unix socket support to the cgroup sockaddr hooks,
let'

bpf: Propagate modified uaddrlen from cgroup sockaddr programs

[ Upstream commit fefba7d1ae198dcbf8b3b432de46a4e29f8dbd8c ]

As prep for adding unix socket support to the cgroup sockaddr hooks,
let's propagate the sockaddr length back to the caller after running
a bpf cgroup sockaddr hook program. While not important for AF_INET or
AF_INET6, the sockaddr length is important when working with AF_UNIX
sockaddrs as the size of the sockaddr cannot be determined just from the
address family or the sockaddr's contents.

__cgroup_bpf_run_filter_sock_addr() is modified to take the uaddrlen as
an input/output argument. After running the program, the modified sockaddr
length is stored in the uaddrlen pointer.

Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-3-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: c5114710c8ce ("xsk: fix usage of multi-buffer BPF helpers for ZC XDP")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udp: annotate data-races around up->pending

[ Upstream commit 482521d8e0c6520429478aa6866cd44128b33d5d ]

up->pending can be read without holding the socket lock,
as pointed out by syzbot [1]

Add R

udp: annotate data-races around up->pending

[ Upstream commit 482521d8e0c6520429478aa6866cd44128b33d5d ]

up->pending can be read without holding the socket lock,
as pointed out by syzbot [1]

Add READ_ONCE() in lockless contexts, and WRITE_ONCE()
on write side.

[1]
BUG: KCSAN: data-race in udpv6_sendmsg / udpv6_sendmsg

write to 0xffff88814e5eadf0 of 4 bytes by task 15547 on cpu 1:
udpv6_sendmsg+0x1405/0x1530 net/ipv6/udp.c:1596
inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:657
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x257/0x310 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0x78/0x90 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

read to 0xffff88814e5eadf0 of 4 bytes by task 15551 on cpu 0:
udpv6_sendmsg+0x22c/0x1530 net/ipv6/udp.c:1373
inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:657
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2586
___sys_sendmsg net/socket.c:2640 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2726
__do_sys_sendmmsg net/socket.c:2755 [inline]
__se_sys_sendmmsg net/socket.c:2752 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2752
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

value changed: 0x00000000 -> 0x0000000a

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15551 Comm: syz-executor.1 Tainted: G W 6.7.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+8d482d0e407f665d9d10@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000009e46c3060ebcdffd@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udplite: fix various data-races

[ Upstream commit 882af43a0fc37e26d85fb0df0c9edd3bed928de4 ]

udp->pcflag, udp->pcslen and udp->pcrlen reads/writes are racy.

Move udp->pcflag to udp->udp_flags for

udplite: fix various data-races

[ Upstream commit 882af43a0fc37e26d85fb0df0c9edd3bed928de4 ]

udp->pcflag, udp->pcslen and udp->pcrlen reads/writes are racy.

Move udp->pcflag to udp->udp_flags for atomicity,
and add READ_ONCE()/WRITE_ONCE() annotations for pcslen and pcrlen.

Fixes: ba4e58eca8aa ("[NET]: Supporting UDP-Lite (RFC 3828) in Linux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udp: annotate data-races around udp->encap_type

[ Upstream commit 70a36f571362a8de8b8c02d21ae524fc776287f2 ]

syzbot/KCSAN complained about UDP_ENCAP_L2TPINUDP setsockopt() racing.

Add READ_ONCE()/

udp: annotate data-races around udp->encap_type

[ Upstream commit 70a36f571362a8de8b8c02d21ae524fc776287f2 ]

syzbot/KCSAN complained about UDP_ENCAP_L2TPINUDP setsockopt() racing.

Add READ_ONCE()/WRITE_ONCE() to document races on this lockless field.

syzbot report was:
BUG: KCSAN: data-race in udp_lib_setsockopt / udp_lib_setsockopt

read-write to 0xffff8881083603fa of 1 bytes by task 16557 on cpu 0:
udp_lib_setsockopt+0x682/0x6c0
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2779
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read-write to 0xffff8881083603fa of 1 bytes by task 16554 on cpu 1:
udp_lib_setsockopt+0x682/0x6c0
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2779
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x01 -> 0x05

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16554 Comm: syz-executor.5 Not tainted 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udp: lockless UDP_ENCAP_L2TPINUDP / UDP_GRO

[ Upstream commit ac9a7f4ce5dda1472e8f44096f33066c6ec1a3b4 ]

Move udp->encap_enabled to udp->udp_flags.

Add udp_test_and_set_bit() helper to allow lockl

udp: lockless UDP_ENCAP_L2TPINUDP / UDP_GRO

[ Upstream commit ac9a7f4ce5dda1472e8f44096f33066c6ec1a3b4 ]

Move udp->encap_enabled to udp->udp_flags.

Add udp_test_and_set_bit() helper to allow lockless
udp_tunnel_encap_enable() implementation.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 70a36f571362 ("udp: annotate data-races around udp->encap_type")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udp: move udp->gro_enabled to udp->udp_flags

[ Upstream commit e1dc0615c6b08ef36414f08c011965b8fb56198b ]

syzbot reported that udp->gro_enabled can be read locklessly.
Use one atomic bit from udp->

udp: move udp->gro_enabled to udp->udp_flags

[ Upstream commit e1dc0615c6b08ef36414f08c011965b8fb56198b ]

syzbot reported that udp->gro_enabled can be read locklessly.
Use one atomic bit from udp->udp_flags.

Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udp: move udp->no_check6_rx to udp->udp_flags

[ Upstream commit bcbc1b1de884647aa0318bf74eb7f293d72a1e40 ]

syzbot reported that udp->no_check6_rx can be read locklessly.
Use one atomic bit from udp

udp: move udp->no_check6_rx to udp->udp_flags

[ Upstream commit bcbc1b1de884647aa0318bf74eb7f293d72a1e40 ]

syzbot reported that udp->no_check6_rx can be read locklessly.
Use one atomic bit from udp->udp_flags.

Fixes: 1c19448c9ba6 ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udp: move udp->no_check6_tx to udp->udp_flags

[ Upstream commit a0002127cd746fcaa182ad3386ef6931c37f3bda ]

syzbot reported that udp->no_check6_tx can be read locklessly.
Use one atomic bit from udp

udp: move udp->no_check6_tx to udp->udp_flags

[ Upstream commit a0002127cd746fcaa182ad3386ef6931c37f3bda ]

syzbot reported that udp->no_check6_tx can be read locklessly.
Use one atomic bit from udp->udp_flags

Fixes: 1c19448c9ba6 ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

udp: introduce udp->udp_flags

[ Upstream commit 81b36803ac139827538ac5ce4028e750a3c53f53 ]

According to syzbot, it is time to use proper atomic flags
for various UDP flags.

Add udp_flags field, an

udp: introduce udp->udp_flags

[ Upstream commit 81b36803ac139827538ac5ce4028e750a3c53f53 ]

According to syzbot, it is time to use proper atomic flags
for various UDP flags.

Add udp_flags field, and convert udp->corkflag to first
bit in it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: a0002127cd74 ("udp: move udp->no_check6_tx to udp->udp_flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

net: annotate data-races around sk->sk_tsflags

sk->sk_tsflags can be read locklessly, add corresponding annotations.

Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags")
Sign

net: annotate data-races around sk->sk_tsflags

sk->sk_tsflags can be read locklessly, add corresponding annotations.

Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

inet: introduce inet->inet_flags

Various inet fields are currently racy.

do_ip_setsockopt() and do_ip_getsockopt() are mostly holding
the socket lock, but some (fast) paths do not.

Use a new inet-

inet: introduce inet->inet_flags

Various inet fields are currently racy.

do_ip_setsockopt() and do_ip_getsockopt() are mostly holding
the socket lock, but some (fast) paths do not.

Use a new inet->inet_flags to hold atomic bits in the series.

Remove inet->cmsg_flags, and use instead 9 bits from inet_flags.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: annotate data-races around sk->sk_mark

sk->sk_mark is often read while another thread could change the value.

Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-b

net: annotate data-races around sk->sk_mark

sk->sk_mark is often read while another thread could change the value.

Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: gro: fix misuse of CB in udp socket lookup

This patch fixes a misuse of IP{6}CB(skb) in GRO, while calling to
`udp6_lib_lookup2` when handling udp tunnels. `udp6_lib_lookup2` fetch the
device f

net: gro: fix misuse of CB in udp socket lookup

This patch fixes a misuse of IP{6}CB(skb) in GRO, while calling to
`udp6_lib_lookup2` when handling udp tunnels. `udp6_lib_lookup2` fetch the
device from CB. The fix changes it to fetch the device from `skb->dev`.
l3mdev case requires special attention since it has a master and a slave
device.

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Reported-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign

Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT
sockets. This means we can't use the helper to steer traffic to En

bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign

Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT
sockets. This means we can't use the helper to steer traffic to Envoy,
which configures SO_REUSEPORT on its sockets. In turn, we're blocked
from removing TPROXY from our setup.

The reason that bpf_sk_assign refuses such sockets is that the
bpf_sk_lookup helpers don't execute SK_REUSEPORT programs. Instead,
one of the reuseport sockets is selected by hash. This could cause
dispatch to the "wrong" socket:

sk = bpf_sk_lookup_tcp(...) // select SO_REUSEPORT by hash
bpf_sk_assign(skb, sk) // SK_REUSEPORT wasn't executed

Fixing this isn't as simple as invoking SK_REUSEPORT from the lookup
helpers unfortunately. In the tc context, L2 headers are at the start
of the skb, while SK_REUSEPORT expects L3 headers instead.

Instead, we execute the SK_REUSEPORT program when the assigned socket
is pulled out of the skb, further up the stack. This creates some
trickiness with regards to refcounting as bpf_sk_assign will put both
refcounted and RCU freed sockets in skb->sk. reuseport sockets are RCU
freed. We can infer that the sk_assigned socket is RCU freed if the
reuseport lookup succeeds, but convincing yourself of this fact isn't
straight forward. Therefore we defensively check refcounting on the
sk_assign sock even though it's probably not required in practice.

Fixes: 8e368dc72e86 ("bpf: Fix use of sk->sk_reuseport from sk_assign")
Fixes: cf7fbe660f2d ("bpf: Add socket assign support")
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Stringer <joe@cilium.io>
Link: https://lore.kernel.org/bpf/CACAyw98+qycmpQzKupquhkxbvWK4OFyDuuLMBNROnfWMZxUWeA@mail.gmail.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-7-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...

net: remove duplicate sk_lookup helpers

Now that inet[6]_lookup_reuseport are parameterised on the ehashfn
we can remove two sk_lookup helpers.

Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Si

net: remove duplicate sk_lookup helpers

Now that inet[6]_lookup_reuseport are parameterised on the ehashfn
we can remove two sk_lookup helpers.

Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-6-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

show more ...