netfilter: ip_tables: remove clusterip target

Marked as 'to be removed soon' since kernel 4.1 (2015).
Functionality was superseded by the 'cluster' match, added in kernel
2.6.30 (2009).

clusterip_t

netfilter: ip_tables: remove clusterip target

Marked as 'to be removed soon' since kernel 4.1 (2015).
Functionality was superseded by the 'cluster' match, added in kernel
2.6.30 (2009).

clusterip_tg_check still has races that can give

proc_dir_entry 'ipt_CLUSTERIP/10.1.1.2' already registered

followed by a WARN splat.

Remove it instead of trying to fix this up again.
clusterip uapi header is left as-is for now.

Signed-off-by: Florian Westphal <fw@strlen.de>

show more ...

netfilter: flowtable: remove ipv4/ipv6 modules

Just place the structs and registration in the inet module.
nf_flow_table_ipv6, nf_flow_table_ipv4 and nf_flow_table_inet share
same module dependencie

netfilter: flowtable: remove ipv4/ipv6 modules

Just place the structs and registration in the inet module.
nf_flow_table_ipv6, nf_flow_table_ipv4 and nf_flow_table_inet share
same module dependencies: nf_flow_table, nf_tables.

before:
text data bss dec hex filename
2278 1480 0 3758 eae nf_flow_table_inet.ko
1159 1352 0 2511 9cf nf_flow_table_ipv6.ko
1154 1352 0 2506 9ca nf_flow_table_ipv4.ko

after:
2369 1672 0 4041 fc9 nf_flow_table_inet.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nf_log_arp: merge with nf_log_syslog

similar to previous change: nf_log_syslog now covers ARP logging
as well, the old nf_log_arp module is removed.

Signed-off-by: Florian Westphal <fw@s

netfilter: nf_log_arp: merge with nf_log_syslog

similar to previous change: nf_log_syslog now covers ARP logging
as well, the old nf_log_arp module is removed.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nf_log_ipv4: rename to nf_log_syslog

Netfilter has multiple log modules:
nf_log_arp
nf_log_bridge
nf_log_ipv4
nf_log_ipv6
nf_log_netdev
nfnetlink_log
nf_log_common

With the except

netfilter: nf_log_ipv4: rename to nf_log_syslog

Netfilter has multiple log modules:
nf_log_arp
nf_log_bridge
nf_log_ipv4
nf_log_ipv6
nf_log_netdev
nfnetlink_log
nf_log_common

With the exception of nfnetlink_log (packet is sent to userspace for
dissection/logging), all of them log to the kernel ringbuffer.

This is the first part of a series to merge all modules except
nfnetlink_log into a single module: nf_log_syslog.

This allows to reduce code. After the series, only two log modules remain:
nfnetlink_log and nf_log_syslog. The latter provides the same
functionality as the old per-af log modules.

This renames nf_log_ipv4 to nf_log_syslog.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: fix coding-style errors.

Several header-files, Kconfig files and Makefiles have trailing
white-space. Remove it.

In netfilter/Kconfig, indent the type of CONFIG_NETFILTER_NETLINK_ACCT
c

netfilter: fix coding-style errors.

Several header-files, Kconfig files and Makefiles have trailing
white-space. Remove it.

In netfilter/Kconfig, indent the type of CONFIG_NETFILTER_NETLINK_ACCT
correctly.

There are semicolons at the end of two function definitions in
include/net/netfilter/nf_conntrack_acct.h and
include/net/netfilter/nf_conntrack_ecache.h. Remove them.

Fix indentation in nf_conntrack_l4proto.h.

Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: x_tables: merge ip and ipv6 masquerade modules

No need to have separate modules for this.
before:
text data bss dec filename
2038 1168 0 3206 net/ipv4/netfilter/ipt_M

netfilter: x_tables: merge ip and ipv6 masquerade modules

No need to have separate modules for this.
before:
text data bss dec filename
2038 1168 0 3206 net/ipv4/netfilter/ipt_MASQUERADE.ko
1526 1024 0 2550 net/ipv6/netfilter/ip6t_MASQUERADE.ko
after:
text data bss dec filename
2521 1296 0 3817 net/netfilter/xt_MASQUERADE.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nf_tables: merge route type into core

very little code, so it really doesn't make sense to have extra
modules or even a kconfig knob for this.

Merge them and make functionality available

netfilter: nf_tables: merge route type into core

very little code, so it really doesn't make sense to have extra
modules or even a kconfig knob for this.

Merge them and make functionality available unconditionally.
The merge makes inet family route support trivial, so add it
as well here.

Before:
text data bss dec hex filename
835 832 0 1667 683 nft_chain_route_ipv4.ko
870 832 0 1702 6a6 nft_chain_route_ipv6.ko
111568 2556 529 114653 1bfdd nf_tables.ko

After:
text data bss dec hex filename
113133 2556 529 116218 1c5fa nf_tables.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nf_tables: merge ipv4 and ipv6 nat chain types

Merge the ipv4 and ipv6 nat chain type. This is the last
missing piece which allows to provide inet family support
for nat in a follow patch

netfilter: nf_tables: merge ipv4 and ipv6 nat chain types

Merge the ipv4 and ipv6 nat chain type. This is the last
missing piece which allows to provide inet family support
for nat in a follow patch.

The kconfig knobs for ipv4/ipv6 nat chain are removed, the
nat chain type will be built unconditionally if NFT_NAT
expression is enabled.

Before:
text data bss dec hex filename
1576 896 0 2472 9a8 nft_chain_nat_ipv4.ko
1697 896 0 2593 a21 nft_chain_nat_ipv6.ko

After:
text data bss dec hex filename
1832 896 0 2728 aa8 nft_chain_nat.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nf_tables: nat: merge nft_masq protocol specific modules

The family specific masq modules are way too small to warrant
an extra module, just place all of them in nft_masq.

before:
text

netfilter: nf_tables: nat: merge nft_masq protocol specific modules

The family specific masq modules are way too small to warrant
an extra module, just place all of them in nft_masq.

before:
text data bss dec hex filename
1001 832 0 1833 729 nft_masq.ko
766 896 0 1662 67e nft_masq_ipv4.ko
764 896 0 1660 67c nft_masq_ipv6.ko

after:
2010 960 0 2970 b9a nft_masq.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nf_tables: nat: merge nft_redir protocol specific modules

before:
text data bss dec hex filename
990 832 0 1822 71e nft_redir.ko
697 896 0

netfilter: nf_tables: nat: merge nft_redir protocol specific modules

before:
text data bss dec hex filename
990 832 0 1822 71e nft_redir.ko
697 896 0 1593 639 nft_redir_ipv4.ko
713 896 0 1609 649 nft_redir_ipv6.ko

after:
text data bss dec hex filename
1910 960 0 2870 b36 nft_redir.ko

size is reduced, all helpers from nft_redir.ko can be made static.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nat: merge nf_nat_ipv4,6 into nat core

before:
text data bss dec hex filename
16566 1576 4136 22278 5706 nf_nat.ko
3598 844 0 4442 115a n

netfilter: nat: merge nf_nat_ipv4,6 into nat core

before:
text data bss dec hex filename
16566 1576 4136 22278 5706 nf_nat.ko
3598 844 0 4442 115a nf_nat_ipv6.ko
3187 844 0 4031 fbf nf_nat_ipv4.ko

after:
text data bss dec hex filename
22948 1612 4136 28696 7018 nf_nat.ko

... with ipv4/v6 nat now provided directly via nf_nat.ko.

Also changes:
ret = nf_nat_ipv4_fn(priv, skb, state);
if (ret != NF_DROP && ret != NF_STOLEN &&
into
if (ret != NF_ACCEPT)
return ret;

everywhere.

The nat hooks never should return anything other than
ACCEPT or DROP (and the latter only in rare error cases).

The original code uses multi-line ANDing including assignment-in-if:
if (ret != NF_DROP && ret != NF_STOLEN &&
!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
(ct = nf_ct_get(skb, &ctinfo)) != NULL) {

I removed this while moving, breaking those in separate conditionals
and moving the assignments into extra lines.

checkpatch still generates some warnings:
1. Overly long lines (of moved code).
Breaking them is even more ugly. so I kept this as-is.
2. use of extern function declarations in a .c file.
This is necessary evil, we must call
nf_nat_l3proto_register() from the nat core now.
All l3proto related functions are removed later in this series,
those prototypes are then removed as well.

v2: keep empty nf_nat_ipv6_csum_update stub for CONFIG_IPV6=n case.
v3: remove IS_ENABLED(NF_NAT_IPV4/6) tests, NF_NAT_IPVx toggles
are removed here.
v4: also get rid of the assignments in conditionals.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nat: merge ipv4 and ipv6 masquerade functionality

Before:
text data bss dec hex filename
13916 1412 4128 19456 4c00 nf_nat.ko
4510 968 4 548

netfilter: nat: merge ipv4 and ipv6 masquerade functionality

Before:
text data bss dec hex filename
13916 1412 4128 19456 4c00 nf_nat.ko
4510 968 4 5482 156a nf_nat_ipv4.ko
5146 944 8 6098 17d2 nf_nat_ipv6.ko

After:
text data bss dec hex filename
16566 1576 4136 22278 5706 nf_nat.ko
3187 844 0 4031 fbf nf_nat_ipv4.ko
3598 844 0 4442 115a nf_nat_ipv6.ko

... so no drastic changes in combined size.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nat: remove nf_nat_l4proto struct

This removes the (now empty) nf_nat_l4proto struct, all its instances
and all the no longer needed runtime (un)register functionality.

nf_nat_need_gre()

netfilter: nat: remove nf_nat_l4proto struct

This removes the (now empty) nf_nat_l4proto struct, all its instances
and all the no longer needed runtime (un)register functionality.

nf_nat_need_gre() can be axed as well: the module that calls it (to
load the no-longer-existing nat_gre module) also calls other nat core
functions. GRE nat is now always available if kernel is built with it.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: conntrack: remove l3proto abstraction

This unifies ipv4 and ipv6 protocol trackers and removes the l3proto
abstraction.

This gets rid of all l3proto indirect calls and the need to do
a l

netfilter: conntrack: remove l3proto abstraction

This unifies ipv4 and ipv6 protocol trackers and removes the l3proto
abstraction.

This gets rid of all l3proto indirect calls and the need to do
a lookup on the function to call for l3 demux.

It increases module size by only a small amount (12kbyte), so this reduces
size because nf_conntrack.ko is useless without either nf_conntrack_ipv4
or nf_conntrack_ipv6 module.

before:
text data bss dec hex filename
7357 1088 0 8445 20fd nf_conntrack_ipv4.ko
7405 1084 4 8493 212d nf_conntrack_ipv6.ko
72614 13689 236 86539 1520b nf_conntrack.ko
19K nf_conntrack_ipv4.ko
19K nf_conntrack_ipv6.ko
179K nf_conntrack.ko

after:
text data bss dec hex filename
79277 13937 236 93450 16d0a nf_conntrack.ko
191K nf_conntrack.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: Libify xt_TPROXY

The extracted functions will likely be usefull to implement tproxy
support in nf_tables.

Extrancted functions:
- nf_tproxy_sk_is_transparent
- nf_tproxy_laddr4
- nf_t

netfilter: Libify xt_TPROXY

The extracted functions will likely be usefull to implement tproxy
support in nf_tables.

Extrancted functions:
- nf_tproxy_sk_is_transparent
- nf_tproxy_laddr4
- nf_tproxy_handle_time_wait4
- nf_tproxy_get_sock_v4
- nf_tproxy_laddr6
- nf_tproxy_handle_time_wait6
- nf_tproxy_get_sock_v6

(nf_)tproxy_handle_time_wait6 also needed some refactor as its current
implementation was xtables-specific.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nat: merge ipv4/ipv6 masquerade code into main nat module

Instead of using extra modules for these, turn the config options into
an implicit dependency that adds masq feature to the proto

netfilter: nat: merge ipv4/ipv6 masquerade code into main nat module

Instead of using extra modules for these, turn the config options into
an implicit dependency that adds masq feature to the protocol specific nf_nat module.

before:
text data bss dec hex filename
2001 860 4 2865 b31 net/ipv4/netfilter/nf_nat_masquerade_ipv4.ko
5579 780 2 6361 18d9 net/ipv4/netfilter/nf_nat_ipv4.ko
2860 836 8 3704 e78 net/ipv6/netfilter/nf_nat_masquerade_ipv6.ko
6648 780 2 7430 1d06 net/ipv6/netfilter/nf_nat_ipv6.ko

after:
text data bss dec hex filename
7245 872 8 8125 1fbd net/ipv4/netfilter/nf_nat_ipv4.ko
9165 848 12 10025 2729 net/ipv6/netfilter/nf_nat_ipv6.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

kbuild: rename *-asn1.[ch] to *.asn1.[ch]

Our convention is to distinguish file types by suffixes with a period
as a separator.

*-asn1.[ch] is a different pattern from other generated sources such

kbuild: rename *-asn1.[ch] to *.asn1.[ch]

Our convention is to distinguish file types by suffixes with a period
as a separator.

*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
net/netfilter/nf_conntrack_h323_asn1.c
include/linux/netfilter/nf_conntrack_h323_asn1.h
include/linux/sunrpc/gss_asn1.h

Rename generated files to *.asn1.[ch] for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

kbuild: clean up *-asn1.[ch] patterns from top-level Makefile

Clean up these patterns from the top Makefile to omit 'clean-files'
in each Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@s

kbuild: clean up *-asn1.[ch] patterns from top-level Makefile

Clean up these patterns from the top Makefile to omit 'clean-files'
in each Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

netfilter: nf_tables: build-in filter chain type

One module per supported filter chain family type takes too much memory
for very little code - too much modularization - place all chain filter
defin

netfilter: nf_tables: build-in filter chain type

One module per supported filter chain family type takes too much memory
for very little code - too much modularization - place all chain filter
definitions in one single file.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nf_nat_snmp_basic: add correct dependency to Makefile

nf_nat_snmp_basic_main.c includes a generated header, but the
necessary dependency is missing in Makefile. This could cause
build err

netfilter: nf_nat_snmp_basic: add correct dependency to Makefile

nf_nat_snmp_basic_main.c includes a generated header, but the
necessary dependency is missing in Makefile. This could cause
build error in parallel building.

Remove a weird line, and add a correct one.

Fixes: cc2d58634e0f ("netfilter: nf_nat_snmp_basic: use asn1 decoder library")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

netfilter: nf_nat_snmp_basic: use asn1 decoder library

The basic SNMP ALG parse snmp ASN.1 payload
however, since 2012 linux kernel provide ASN.1 decoder library.
If we use ASN.1 decoder in the /lib

netfilter: nf_nat_snmp_basic: use asn1 decoder library

The basic SNMP ALG parse snmp ASN.1 payload
however, since 2012 linux kernel provide ASN.1 decoder library.
If we use ASN.1 decoder in the /lib/asn1_decoder.c, we can remove
about 1000 line of ASN.1 parsing routine.

To use asn1_decoder.c, we should write mib file(nf_nat_snmp_basic.asn1)
then /script/asn1_compiler.c makes *-asn1.c and *-asn1.h file
at the compiletime.(nf_nat_snmp_basic-asn1.c, nf_nat_snmp_basic-asn1.h)
The nf_nat_snmp_basic.asn1 is made by RFC1155, RFC1157, RFC1902, RFC1905,
RFC2578, RFC3416. of course that mib file supports only the basic SNMP ALG.

Previous SNMP ALG mangles only first octet of IPv4 address.
but after this patch, the SNMP ALG mangles whole IPv4 Address.
And SNMPv3 is not supported.

I tested with snmp commands such ans snmpd, snmpwalk, snmptrap.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: flow table support for IPv4

This patch adds the IPv4 flow table type, that implements the datapath
flow table to forward IPv4 traffic. Rationale is:

1) Look up for the packet in the flow

netfilter: flow table support for IPv4

This patch adds the IPv4 flow table type, that implements the datapath
flow table to forward IPv4 traffic. Rationale is:

1) Look up for the packet in the flow table, from the ingress hook.
2) If there's a hit, decrement ttl and pass it on to the neighbour layer
for transmission.
3) If there's a miss, packet is passed up to the classic forwarding
path.

This patch also supports layer 3 source and destination NAT.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

netfilter: move socket lookup infrastructure to nf_socket_ipv{4,6}.c

We need this split to reuse existing codebase for the upcoming nf_tables
socket expression.

Signed-off-by: Pablo Neira Ayuso <pa

netfilter: move socket lookup infrastructure to nf_socket_ipv{4,6}.c

We need this split to reuse existing codebase for the upcoming nf_tables
socket expression.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...

netfilter: nf_tables: add fib expression

Add FIB expression, supported for ipv4, ipv6 and inet family (the latter
just dispatches to ipv4 or ipv6 one based on nfproto).

Currently supports fetching

netfilter: nf_tables: add fib expression

Add FIB expression, supported for ipv4, ipv6 and inet family (the latter
just dispatches to ipv4 or ipv6 one based on nfproto).

Currently supports fetching output interface index/name and the
rtm_type associated with an address.

This can be used for adding path filtering. rtm_type is useful
to e.g. enforce a strong-end host model where packets
are only accepted if daddr is configured on the interface the
packet arrived on.

The fib expression is a native nftables alternative to the
xtables addrtype and rp_filter matches.

FIB result order for oif/oifname retrieval is as follows:
- if packet is local (skb has rtable, RTF_LOCAL set, this
will also catch looped-back multicast packets), set oif to
the loopback interface.
- if fib lookup returns an error, or result points to local,
store zero result. This means '--local' option of -m rpfilter
is not supported. It is possible to use 'fib type local' or add
explicit saddr/daddr matching rules to create exceptions if this
is really needed.
- store result in the destination register.
In case of multiple routes, search set for desired oif in case
strict matching is requested.

ipv4 and ipv6 behave fib expressions are supposed to behave the same.

[ I have collapsed Arnd Bergmann's ("netfilter: nf_tables: fib warnings")

http://patchwork.ozlabs.org/patch/688615/

to address fallout from this patch after rebasing nf-next, that was
posted to address compilation warnings. --pablo ]

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

show more ...