177e33b6 | 17-Nov-2023 |
Oleksij Rempel <o.rempel@pengutronix.de> |
net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
commit d3e2904f71ea0fe7eaff1d68a2b0363c888ea0fb upstream.
This patch enhances error handling in
net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
commit d3e2904f71ea0fe7eaff1d68a2b0363c888ea0fb upstream.
This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts().
Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: syzbot+daa36413a5cedf799ae4@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20231117124959.961171-1-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
b6f78276 | 28-May-2024 |
Oleksij Rempel <o.rempel@pengutronix.de> |
net: can: j1939: recover socket queue on CAN bus error during BAM transmission
commit 9ad1da14ab3bf23087ae45fe399d84a109ddb81a upstream.
Addresses an issue where a CAN bus error during a BAM transm
net: can: j1939: recover socket queue on CAN bus error during BAM transmission
commit 9ad1da14ab3bf23087ae45fe399d84a109ddb81a upstream.
Addresses an issue where a CAN bus error during a BAM transmission could stall the socket queue, preventing further transmissions even after the bus error is resolved. The fix activates the next queued session after the error recovery, allowing communication to continue.
Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org Reported-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Tested-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20240528070648.1947203-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
f84e7534 | 20-Oct-2023 |
Oleksij Rempel <o.rempel@pengutronix.de> |
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
commit efe7cf828039aedb297c1f9920b638fffee6aabc upstream.
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_F
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
commit efe7cf828039aedb297c1f9920b638fffee6aabc upstream.
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets.
Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350
CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 </IRQ> <TASK> __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Reported-by: Sili Luo <rootlab@huawei.com> Suggested-by: Sili Luo <rootlab@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20231020133814.383996-1-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
9f16eb10 | 26-May-2023 |
Fedor Pchelkin <pchelkin@ispras.ru> |
can: j1939: avoid possible use-after-free when j1939_can_rx_register fails
Syzkaller reports the following failure:
BUG: KASAN: use-after-free in kref_put include/linux/kref.h:64 [inline] BUG: KASA
can: j1939: avoid possible use-after-free when j1939_can_rx_register fails
Syzkaller reports the following failure:
BUG: KASAN: use-after-free in kref_put include/linux/kref.h:64 [inline] BUG: KASAN: use-after-free in j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172 Write of size 4 at addr ffff888141c15058 by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.144-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x220 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x145/0x190 mm/kasan/generic.c:192 instrument_atomic_read_write include/linux/instrumented.h:101 [inline] atomic_fetch_sub_release include/asm-generic/atomic-instrumented.h:220 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] kref_put include/linux/kref.h:64 [inline] j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172 j1939_sk_sock_destruct+0x44/0x90 net/can/j1939/socket.c:374 __sk_destruct+0x4e/0x820 net/core/sock.c:1784 rcu_do_batch kernel/rcu/tree.c:2485 [inline] rcu_core+0xb35/0x1a30 kernel/rcu/tree.c:2726 __do_softirq+0x289/0x9a3 kernel/softirq.c:298 asm_call_irq_on_stack+0x12/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0xaa/0xe0 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:393 [inline] __irq_exit_rcu kernel/softirq.c:423 [inline] irq_exit_rcu+0x136/0x200 kernel/softirq.c:435 sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1095 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:635
Allocated by task 1141: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xc9/0xd0 mm/kasan/common.c:461 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] j1939_priv_create net/can/j1939/main.c:131 [inline] j1939_netdev_start+0x111/0x860 net/can/j1939/main.c:268 j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485 __sys_bind+0x1f2/0x260 net/socket.c:1645 __do_sys_bind net/socket.c:1656 [inline] __se_sys_bind net/socket.c:1654 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1654 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6
Freed by task 1141: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x112/0x170 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1542 [inline] slab_free_freelist_hook+0xad/0x190 mm/slub.c:1576 slab_free mm/slub.c:3149 [inline] kfree+0xd9/0x3b0 mm/slub.c:4125 j1939_netdev_start+0x5ee/0x860 net/can/j1939/main.c:300 j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485 __sys_bind+0x1f2/0x260 net/socket.c:1645 __do_sys_bind net/socket.c:1656 [inline] __se_sys_bind net/socket.c:1654 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1654 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6
It can be caused by this scenario:
CPU0 CPU1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start() j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start() mutex_lock(&j1939_netdev_lock) j1939_priv_set(ndev0, priv) mutex_unlock(&j1939_netdev_lock) if (priv_new) kref_get(&priv_new->rx_kref) return priv_new; /* inside j1939_sk_bind() */ jsk->priv = priv j1939_can_rx_register(priv) // fails j1939_priv_set(ndev, NULL) kfree(priv) j1939_sk_sock_destruct() j1939_priv_put() // <- uaf
To avoid this, call j1939_can_rx_register() under j1939_netdev_lock so that a concurrent thread cannot process j1939_priv before j1939_can_rx_register() returns.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230526171910.227615-3-pchelkin@ispras.ru Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
show more ...
|
cd9c790d | 26-May-2023 |
Fedor Pchelkin <pchelkin@ispras.ru> |
can: j1939: change j1939_netdev_lock type to mutex
It turns out access to j1939_can_rx_register() needs to be serialized, otherwise j1939_priv can be corrupted when parallel threads call j1939_netde
can: j1939: change j1939_netdev_lock type to mutex
It turns out access to j1939_can_rx_register() needs to be serialized, otherwise j1939_priv can be corrupted when parallel threads call j1939_netdev_start() and j1939_can_rx_register() fails. This issue is thoroughly covered in other commit which serializes access to j1939_can_rx_register().
Change j1939_netdev_lock type to mutex so that we do not need to remove GFP_KERNEL from can_rx_register().
j1939_netdev_lock seems to be used in normal contexts where mutex usage is not prohibited.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230526171910.227615-2-pchelkin@ispras.ru Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
show more ...
|
8c21c54a | 05-Aug-2022 |
Fedor Pchelkin <pchelkin@ispras.ru> |
can: j1939: j1939_session_destroy(): fix memory leak of skbs
We need to drop skb references taken in j1939_session_skb_queue() when destroying a session in j1939_session_destroy(). Otherwise those s
can: j1939: j1939_session_destroy(): fix memory leak of skbs
We need to drop skb references taken in j1939_session_skb_queue() when destroying a session in j1939_session_destroy(). Otherwise those skbs would be lost.
Link to Syzkaller info and repro: https://forge.ispras.ru/issues/11743.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
V1: https://lore.kernel.org/all/20220708175949.539064-1-pchelkin@ispras.ru
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20220805150216.66313-1-pchelkin@ispras.ru Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
show more ...
|