|
Revision tags: v6.6.32, v6.6.31 |
|
| #
ad3f7986 |
| 04-May-2024 |
Sungwoo Kim <iam@sung-woo.kim> |
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow sin
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.
Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29 |
|
| #
012363cb |
| 25-Apr-2024 |
Duoming Zhou <duoming@zju.edu.cn> |
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasi
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
Cleanup Thread | Worker Thread
sco_sock_release |
sco_sock_close |
__sco_sock_close |
sco_sock_set_timer |
schedule_delayed_work |
sco_sock_kill | (wait a time)
sock_put(sk) //FREE | sco_sock_timeout
| sock_hold(sk) //USE
The KASAN report triggered by POC is shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[ 95.890755] page_type: 0xffffffff()
[ 95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff
[ 95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 95.890755] page dumped because: kasan: bad access detected
[ 95.890755]
[ 95.890755] Memory state around the buggy address:
[ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ^
[ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ==================================================================
Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.32, v6.6.31 |
|
| #
ad3f7986 |
| 04-May-2024 |
Sungwoo Kim <iam@sung-woo.kim> |
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow sin
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.
Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29 |
|
| #
012363cb |
| 25-Apr-2024 |
Duoming Zhou <duoming@zju.edu.cn> |
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasi
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
Cleanup Thread | Worker Thread
sco_sock_release |
sco_sock_close |
__sco_sock_close |
sco_sock_set_timer |
schedule_delayed_work |
sco_sock_kill | (wait a time)
sock_put(sk) //FREE | sco_sock_timeout
| sock_hold(sk) //USE
The KASAN report triggered by POC is shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[ 95.890755] page_type: 0xffffffff()
[ 95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff
[ 95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 95.890755] page dumped because: kasan: bad access detected
[ 95.890755]
[ 95.890755] Memory state around the buggy address:
[ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ^
[ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ==================================================================
Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.32, v6.6.31 |
|
| #
ad3f7986 |
| 04-May-2024 |
Sungwoo Kim <iam@sung-woo.kim> |
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow sin
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.
Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29 |
|
| #
012363cb |
| 25-Apr-2024 |
Duoming Zhou <duoming@zju.edu.cn> |
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasi
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
Cleanup Thread | Worker Thread
sco_sock_release |
sco_sock_close |
__sco_sock_close |
sco_sock_set_timer |
schedule_delayed_work |
sco_sock_kill | (wait a time)
sock_put(sk) //FREE | sco_sock_timeout
| sock_hold(sk) //USE
The KASAN report triggered by POC is shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[ 95.890755] page_type: 0xffffffff()
[ 95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff
[ 95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 95.890755] page dumped because: kasan: bad access detected
[ 95.890755]
[ 95.890755] Memory state around the buggy address:
[ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ^
[ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ==================================================================
Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29 |
|
| #
012363cb |
| 25-Apr-2024 |
Duoming Zhou <duoming@zju.edu.cn> |
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasi
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
Cleanup Thread | Worker Thread
sco_sock_release |
sco_sock_close |
__sco_sock_close |
sco_sock_set_timer |
schedule_delayed_work |
sco_sock_kill | (wait a time)
sock_put(sk) //FREE | sco_sock_timeout
| sock_hold(sk) //USE
The KASAN report triggered by POC is shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[ 95.890755] page_type: 0xffffffff()
[ 95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff
[ 95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 95.890755] page dumped because: kasan: bad access detected
[ 95.890755]
[ 95.890755] Memory state around the buggy address:
[ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ^
[ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ==================================================================
Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29 |
|
| #
012363cb |
| 25-Apr-2024 |
Duoming Zhou <duoming@zju.edu.cn> |
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasi
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
Cleanup Thread | Worker Thread
sco_sock_release |
sco_sock_close |
__sco_sock_close |
sco_sock_set_timer |
schedule_delayed_work |
sco_sock_kill | (wait a time)
sock_put(sk) //FREE | sco_sock_timeout
| sock_hold(sk) //USE
The KASAN report triggered by POC is shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[ 95.890755] page_type: 0xffffffff()
[ 95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff
[ 95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 95.890755] page dumped because: kasan: bad access detected
[ 95.890755]
[ 95.890755] Memory state around the buggy address:
[ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ^
[ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ==================================================================
Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.30, v6.6.29 |
|
| #
012363cb |
| 25-Apr-2024 |
Duoming Zhou <duoming@zju.edu.cn> |
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasi
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
[ Upstream commit 483bc08181827fc475643272ffb69c533007e546 ]
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
Cleanup Thread | Worker Thread
sco_sock_release |
sco_sock_close |
__sco_sock_close |
sco_sock_set_timer |
schedule_delayed_work |
sco_sock_kill | (wait a time)
sock_put(sk) //FREE | sco_sock_timeout
| sock_hold(sk) //USE
The KASAN report triggered by POC is shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[ 95.890755] page_type: 0xffffffff()
[ 95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[ 95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[ 95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff
[ 95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 95.890755] page dumped because: kasan: bad access detected
[ 95.890755]
[ 95.890755] Memory state around the buggy address:
[ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ^
[ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 95.890755] ==================================================================
Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.
Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
4eb706b1 |
| 01-Apr-2024 |
Nathan Chancellor <nathan@kernel.org> |
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
commit 9bf4e919ccad613b3596eebf1ff37b05b6405307 upstream.
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmod
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
commit 9bf4e919ccad613b3596eebf1ff37b05b6405307 upstream.
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to
build due to the checks in check_copy_size():
In file included from net/bluetooth/sco.c:27:
In file included from include/linux/module.h:13:
In file included from include/linux/stat.h:19:
In file included from include/linux/time.h:60:
In file included from include/linux/time32.h:13:
In file included from include/linux/timex.h:67:
In file included from arch/x86/include/asm/timex.h:6:
In file included from arch/x86/include/asm/tsc.h:10:
In file included from arch/x86/include/asm/msr.h:15:
In file included from include/linux/percpu.h:7:
In file included from include/linux/smp.h:118:
include/linux/thread_info.h:244:4: error: call to '__bad_copy_from'
declared with 'error' attribute: copy source size is too small
244 | __bad_copy_from();
| ^
The same exact error occurs in l2cap_sock.c. The copy_to_user()
statements that are failing come from l2cap_sock_getsockopt_old() and
sco_sock_getsockopt_old(). This does not occur with GCC with or without
KCSAN or Clang without KCSAN enabled.
len is defined as an 'int' because it is assigned from
'__user int *optlen'. However, it is clamped against the result of
sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
platforms). This is done with min_t() because min() requires compatible
types, which results in both len and the result of sizeof() being casted
to 'unsigned int', meaning len changes signs and the result of sizeof()
is truncated. From there, len is passed to copy_to_user(), which has a
third parameter type of 'unsigned long', so it is widened and changes
signs again. This excessive casting in combination with the KCSAN
instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
call, failing the build.
The official recommendation from LLVM developers is to consistently use
long types for all size variables to avoid the unnecessary casting in
the first place. Change the type of len to size_t in both
l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears
up the error while allowing min_t() to be replaced with min(), resulting
in simpler code with no casts and fewer implicit conversions. While len
is a different type than optlen now, it should result in no functional
change because the result of sizeof() will clamp all values of optlen in
the same manner as before.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
4eb706b1 |
| 01-Apr-2024 |
Nathan Chancellor <nathan@kernel.org> |
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
commit 9bf4e919ccad613b3596eebf1ff37b05b6405307 upstream.
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmod
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
commit 9bf4e919ccad613b3596eebf1ff37b05b6405307 upstream.
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to
build due to the checks in check_copy_size():
In file included from net/bluetooth/sco.c:27:
In file included from include/linux/module.h:13:
In file included from include/linux/stat.h:19:
In file included from include/linux/time.h:60:
In file included from include/linux/time32.h:13:
In file included from include/linux/timex.h:67:
In file included from arch/x86/include/asm/timex.h:6:
In file included from arch/x86/include/asm/tsc.h:10:
In file included from arch/x86/include/asm/msr.h:15:
In file included from include/linux/percpu.h:7:
In file included from include/linux/smp.h:118:
include/linux/thread_info.h:244:4: error: call to '__bad_copy_from'
declared with 'error' attribute: copy source size is too small
244 | __bad_copy_from();
| ^
The same exact error occurs in l2cap_sock.c. The copy_to_user()
statements that are failing come from l2cap_sock_getsockopt_old() and
sco_sock_getsockopt_old(). This does not occur with GCC with or without
KCSAN or Clang without KCSAN enabled.
len is defined as an 'int' because it is assigned from
'__user int *optlen'. However, it is clamped against the result of
sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
platforms). This is done with min_t() because min() requires compatible
types, which results in both len and the result of sizeof() being casted
to 'unsigned int', meaning len changes signs and the result of sizeof()
is truncated. From there, len is passed to copy_to_user(), which has a
third parameter type of 'unsigned long', so it is widened and changes
signs again. This excessive casting in combination with the KCSAN
instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
call, failing the build.
The official recommendation from LLVM developers is to consistently use
long types for all size variables to avoid the unnecessary casting in
the first place. Change the type of len to size_t in both
l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears
up the error while allowing min_t() to be replaced with min(), resulting
in simpler code with no casts and fewer implicit conversions. While len
is a different type than optlen now, it should result in no functional
change because the result of sizeof() will clamp all values of optlen in
the same manner as before.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24 |
|
| #
4eb706b1 |
| 01-Apr-2024 |
Nathan Chancellor <nathan@kernel.org> |
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
commit 9bf4e919ccad613b3596eebf1ff37b05b6405307 upstream.
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmod
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
commit 9bf4e919ccad613b3596eebf1ff37b05b6405307 upstream.
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to
build due to the checks in check_copy_size():
In file included from net/bluetooth/sco.c:27:
In file included from include/linux/module.h:13:
In file included from include/linux/stat.h:19:
In file included from include/linux/time.h:60:
In file included from include/linux/time32.h:13:
In file included from include/linux/timex.h:67:
In file included from arch/x86/include/asm/timex.h:6:
In file included from arch/x86/include/asm/tsc.h:10:
In file included from arch/x86/include/asm/msr.h:15:
In file included from include/linux/percpu.h:7:
In file included from include/linux/smp.h:118:
include/linux/thread_info.h:244:4: error: call to '__bad_copy_from'
declared with 'error' attribute: copy source size is too small
244 | __bad_copy_from();
| ^
The same exact error occurs in l2cap_sock.c. The copy_to_user()
statements that are failing come from l2cap_sock_getsockopt_old() and
sco_sock_getsockopt_old(). This does not occur with GCC with or without
KCSAN or Clang without KCSAN enabled.
len is defined as an 'int' because it is assigned from
'__user int *optlen'. However, it is clamped against the result of
sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
platforms). This is done with min_t() because min() requires compatible
types, which results in both len and the result of sizeof() being casted
to 'unsigned int', meaning len changes signs and the result of sizeof()
is truncated. From there, len is passed to copy_to_user(), which has a
third parameter type of 'unsigned long', so it is widened and changes
signs again. This excessive casting in combination with the KCSAN
instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
call, failing the build.
The official recommendation from LLVM developers is to consistently use
long types for all size variables to avoid the unnecessary casting in
the first place. Change the type of len to size_t in both
l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears
up the error while allowing min_t() to be replaced with min(), resulting
in simpler code with no casts and fewer implicit conversions. While len
is a different type than optlen now, it should result in no functional
change because the result of sizeof() will clamp all values of optlen in
the same manner as before.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
72473db9 |
| 05-Apr-2024 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user inp
Bluetooth: SCO: Fix not validating setsockopt user input
[ Upstream commit 51eda36d33e43201e7a4fd35232e069b2c850b01 ]
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48 |
|
| #
bc1fb82a |
| 18-Aug-2023 |
Eric Dumazet <edumazet@google.com> |
net: annotate data-races around sk->sk_lingertime
sk_getsockopt() runs locklessly. This means sk->sk_lingertime
can be read while other threads are changing its value.
Other reads also happen witho
net: annotate data-races around sk->sk_lingertime
sk_getsockopt() runs locklessly. This means sk->sk_lingertime
can be read while other threads are changing its value.
Other reads also happen without socket lock being held,
and must be annotated.
Remove preprocessor logic using BITS_PER_LONG, compilers
are smart enough to figure this by themselves.
v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning
(Jakub)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
|
Revision tags: v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39 |
|
| #
3f19ffb2 |
| 13-Jul-2023 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: af_bluetooth: Make BT_PKT_STATUS generic
This makes the handling of BT_PKT_STATUS more generic so it can be
reused by sockets other than SCO like BT_DEFER_SETUP, etc.
Signed-off-by: Luiz
Bluetooth: af_bluetooth: Make BT_PKT_STATUS generic
This makes the handling of BT_PKT_STATUS more generic so it can be
reused by sockets other than SCO like BT_DEFER_SETUP, etc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
show more ...
|
|
Revision tags: v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31 |
|
| #
6bfa273e |
| 25-May-2023 |
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
Bluetooth: Consolidate code around sk_alloc into a helper function
This consolidates code around sk_alloc into bt_sock_alloc which does
take care of common initialization.
Signed-off-by: Luiz Augus
Bluetooth: Consolidate code around sk_alloc into a helper function
This consolidates code around sk_alloc into bt_sock_alloc which does
take care of common initialization.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
show more ...
|