Bluetooth: fix connection setup in l2cap_connect

[ Upstream commit c695439d198d30e10553a3b98360c5efe77b6903 ]

The amp_id argument of l2cap_connect() was removed in
commit 84a4bb6548a2 ("Bluetooth:

Bluetooth: fix connection setup in l2cap_connect

[ Upstream commit c695439d198d30e10553a3b98360c5efe77b6903 ]

The amp_id argument of l2cap_connect() was removed in
commit 84a4bb6548a2 ("Bluetooth: HCI: Remove HCI_AMP support")

It was always called with amp_id == 0, i.e. AMP_ID_BREDR == 0x00 (ie.
non-AMP controller). In the above commit, the code path for amp_id != 0
was preserved, although it should have used the amp_id == 0 one.

Restore the previous behavior of the non-AMP code path, to fix problems
with L2CAP connections.

Fixes: 84a4bb6548a2 ("Bluetooth: HCI: Remove HCI_AMP support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

[ Upstream commit 806a5198c05987b748b50f3d0c0cfb3d417381a4 ]

This removes the bogus check for max > hcon->le_conn_max_interval since
the

Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

[ Upstream commit 806a5198c05987b748b50f3d0c0cfb3d417381a4 ]

This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.

In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:

TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout

Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f95 ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: compute LE flow credits based on recvbuf space

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's re

Bluetooth: compute LE flow credits based on recvbuf space

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's receive buffer was
full. This meant that no back-pressure
was applied to the sender, thus it continued to
send data, resulting in data loss without any
error being reported. Furthermore, the amount
of credits was essentially fixed to a small
amount, leading to reduced performance.

This is fixed by computing the number of returned
LE flow credits based on the estimated available
space in the receive buffer of an L2CAP socket.
Consequently, if the receive buffer is full, no
credits are returned until the buffer is read and
thus cleared by user-space.

Since the computation of available receive buffer
space can only be performed approximately (due to
sk_buff overhead) and the receive buffer size may
be changed by user-space after flow credits have
been sent, superfluous received data is temporary
stored within l2cap_pinfo. This is necessary
because Bluetooth LE provides no retransmission
mechanism once the data has been acked by the
physical layer.

If receive buffer space estimation is not possible
at the moment, we fall back to providing credits
for one full packet as before. This is currently
the case during connection setup, when MPS is not
yet available.

Fixes: b1c325c23d75 ("Bluetooth: Implement returning of LE L2CAP credits")
Signed-off-by: Sebastian Urban <surban@surban.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow sin

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.

Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.

divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()

commit 4d7b41c0e43995b0e992b9f8903109275744b658 upstream.

Extend a critical section to prevent chan from early freeing.
Also make the l2

Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()

commit 4d7b41c0e43995b0e992b9f8903109275744b658 upstream.

Extend a critical section to prevent chan from early freeing.
Also make the l2cap_connect() return type void. Nothing is using the
returned value but it is ugly to return a potentially freed pointer.
Making it void will help with backports because earlier kernels did use
the return value. Now the compile will break for kernels where this
patch is not a complete fix.

Call stack summary:

[use]
l2cap_bredr_sig_cmd
l2cap_connect
┌ mutex_lock(&conn->chan_lock);
│ chan = pchan->ops->new_connection(pchan); <- alloc chan
│ __l2cap_chan_add(conn, chan);
│ l2cap_chan_hold(chan);
│ list_add(&chan->list, &conn->chan_l); ... (1)
└ mutex_unlock(&conn->chan_lock);
chan->conf_state ... (4) <- use after free

[free]
l2cap_conn_del
┌ mutex_lock(&conn->chan_lock);
│ foreach chan in conn->chan_l: ... (2)
│ l2cap_chan_put(chan);
│ l2cap_chan_destroy
│ kfree(chan) ... (3) <- chan freed
└ mutex_unlock(&conn->chan_lock);

==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read
include/linux/instrumented.h:68 [inline]
BUG: KASAN: slab-use-after-free in _test_bit
include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0
net/bluetooth/l2cap_core.c:4260
Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311

Fixes: 73ffa904b782 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del().

Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del(). When we use l2cap_chan_del() to delete the
channel, the chan->conn will be set to null. But the conn could
be dereferenced again in the mutex_lock() of l2cap_chan_timeout().
As a result the null pointer dereference bug will happen. The
KASAN report triggered by POC is shown below:

[ 472.074580] ==================================================================
[ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0
[ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7
[ 472.075308]
[ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36
[ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[ 472.075308] Workqueue: events l2cap_chan_timeout
[ 472.075308] Call Trace:
[ 472.075308] <TASK>
[ 472.075308] dump_stack_lvl+0x137/0x1a0
[ 472.075308] print_report+0x101/0x250
[ 472.075308] ? __virt_addr_valid+0x77/0x160
[ 472.075308] ? mutex_lock+0x68/0xc0
[ 472.075308] kasan_report+0x139/0x170
[ 472.075308] ? mutex_lock+0x68/0xc0
[ 472.075308] kasan_check_range+0x2c3/0x2e0
[ 472.075308] mutex_lock+0x68/0xc0
[ 472.075308] l2cap_chan_timeout+0x181/0x300
[ 472.075308] process_one_work+0x5d2/0xe00
[ 472.075308] worker_thread+0xe1d/0x1660
[ 472.075308] ? pr_cont_work+0x5e0/0x5e0
[ 472.075308] kthread+0x2b7/0x350
[ 472.075308] ? pr_cont_work+0x5e0/0x5e0
[ 472.075308] ? kthread_blkcg+0xd0/0xd0
[ 472.075308] ret_from_fork+0x4d/0x80
[ 472.075308] ? kthread_blkcg+0xd0/0xd0
[ 472.075308] ret_from_fork_asm+0x11/0x20
[ 472.075308] </TASK>
[ 472.075308] ==================================================================
[ 472.094860] Disabling lock debugging due to kernel taint
[ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 472.096136] #PF: supervisor write access in kernel mode
[ 472.096136] #PF: error_code(0x0002) - not-present page
[ 472.096136] PGD 0 P4D 0
[ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
[ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36
[ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[ 472.096136] Workqueue: events l2cap_chan_timeout
[ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[ 472.096136] Call Trace:
[ 472.096136] <TASK>
[ 472.096136] ? __die_body+0x8d/0xe0
[ 472.096136] ? page_fault_oops+0x6b8/0x9a0
[ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0
[ 472.096136] ? do_user_addr_fault+0x1027/0x1340
[ 472.096136] ? _printk+0x7a/0xa0
[ 472.096136] ? mutex_lock+0x68/0xc0
[ 472.096136] ? add_taint+0x42/0xd0
[ 472.096136] ? exc_page_fault+0x6a/0x1b0
[ 472.096136] ? asm_exc_page_fault+0x26/0x30
[ 472.096136] ? mutex_lock+0x75/0xc0
[ 472.096136] ? mutex_lock+0x88/0xc0
[ 472.096136] ? mutex_lock+0x75/0xc0
[ 472.096136] l2cap_chan_timeout+0x181/0x300
[ 472.096136] process_one_work+0x5d2/0xe00
[ 472.096136] worker_thread+0xe1d/0x1660
[ 472.096136] ? pr_cont_work+0x5e0/0x5e0
[ 472.096136] kthread+0x2b7/0x350
[ 472.096136] ? pr_cont_work+0x5e0/0x5e0
[ 472.096136] ? kthread_blkcg+0xd0/0xd0
[ 472.096136] ret_from_fork+0x4d/0x80
[ 472.096136] ? kthread_blkcg+0xd0/0xd0
[ 472.096136] ret_from_fork_asm+0x11/0x20
[ 472.096136] </TASK>
[ 472.096136] Modules linked in:
[ 472.096136] CR2: 0000000000000158
[ 472.096136] ---[ end trace 0000000000000000 ]---
[ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[ 472.132932] Kernel panic - not syncing: Fatal exception
[ 472.132932] Kernel Offset: disabled
[ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]---

Add a check to judge whether the conn is null in l2cap_chan_timeout()
in order to mitigate the bug.

Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: fix connection setup in l2cap_connect

[ Upstream commit c695439d198d30e10553a3b98360c5efe77b6903 ]

The amp_id argument of l2cap_connect() was removed in
commit 84a4bb6548a2 ("Bluetooth:

Bluetooth: fix connection setup in l2cap_connect

[ Upstream commit c695439d198d30e10553a3b98360c5efe77b6903 ]

The amp_id argument of l2cap_connect() was removed in
commit 84a4bb6548a2 ("Bluetooth: HCI: Remove HCI_AMP support")

It was always called with amp_id == 0, i.e. AMP_ID_BREDR == 0x00 (ie.
non-AMP controller). In the above commit, the code path for amp_id != 0
was preserved, although it should have used the amp_id == 0 one.

Restore the previous behavior of the non-AMP code path, to fix problems
with L2CAP connections.

Fixes: 84a4bb6548a2 ("Bluetooth: HCI: Remove HCI_AMP support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

[ Upstream commit 806a5198c05987b748b50f3d0c0cfb3d417381a4 ]

This removes the bogus check for max > hcon->le_conn_max_interval since
the

Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

[ Upstream commit 806a5198c05987b748b50f3d0c0cfb3d417381a4 ]

This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.

In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:

TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout

Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f95 ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: compute LE flow credits based on recvbuf space

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's re

Bluetooth: compute LE flow credits based on recvbuf space

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's receive buffer was
full. This meant that no back-pressure
was applied to the sender, thus it continued to
send data, resulting in data loss without any
error being reported. Furthermore, the amount
of credits was essentially fixed to a small
amount, leading to reduced performance.

This is fixed by computing the number of returned
LE flow credits based on the estimated available
space in the receive buffer of an L2CAP socket.
Consequently, if the receive buffer is full, no
credits are returned until the buffer is read and
thus cleared by user-space.

Since the computation of available receive buffer
space can only be performed approximately (due to
sk_buff overhead) and the receive buffer size may
be changed by user-space after flow credits have
been sent, superfluous received data is temporary
stored within l2cap_pinfo. This is necessary
because Bluetooth LE provides no retransmission
mechanism once the data has been acked by the
physical layer.

If receive buffer space estimation is not possible
at the moment, we fall back to providing credits
for one full packet as before. This is currently
the case during connection setup, when MPS is not
yet available.

Fixes: b1c325c23d75 ("Bluetooth: Implement returning of LE L2CAP credits")
Signed-off-by: Sebastian Urban <surban@surban.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow sin

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.

Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.

divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()

commit 4d7b41c0e43995b0e992b9f8903109275744b658 upstream.

Extend a critical section to prevent chan from early freeing.
Also make the l2

Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()

commit 4d7b41c0e43995b0e992b9f8903109275744b658 upstream.

Extend a critical section to prevent chan from early freeing.
Also make the l2cap_connect() return type void. Nothing is using the
returned value but it is ugly to return a potentially freed pointer.
Making it void will help with backports because earlier kernels did use
the return value. Now the compile will break for kernels where this
patch is not a complete fix.

Call stack summary:

[use]
l2cap_bredr_sig_cmd
l2cap_connect
┌ mutex_lock(&conn->chan_lock);
│ chan = pchan->ops->new_connection(pchan); <- alloc chan
│ __l2cap_chan_add(conn, chan);
│ l2cap_chan_hold(chan);
│ list_add(&chan->list, &conn->chan_l); ... (1)
└ mutex_unlock(&conn->chan_lock);
chan->conf_state ... (4) <- use after free

[free]
l2cap_conn_del
┌ mutex_lock(&conn->chan_lock);
│ foreach chan in conn->chan_l: ... (2)
│ l2cap_chan_put(chan);
│ l2cap_chan_destroy
│ kfree(chan) ... (3) <- chan freed
└ mutex_unlock(&conn->chan_lock);

==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read
include/linux/instrumented.h:68 [inline]
BUG: KASAN: slab-use-after-free in _test_bit
include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0
net/bluetooth/l2cap_core.c:4260
Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311

Fixes: 73ffa904b782 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del().

Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del(). When we use l2cap_chan_del() to delete the
channel, the chan->conn will be set to null. But the conn could
be dereferenced again in the mutex_lock() of l2cap_chan_timeout().
As a result the null pointer dereference bug will happen. The
KASAN report triggered by POC is shown below:

[ 472.074580] ==================================================================
[ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0
[ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7
[ 472.075308]
[ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36
[ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[ 472.075308] Workqueue: events l2cap_chan_timeout
[ 472.075308] Call Trace:
[ 472.075308] <TASK>
[ 472.075308] dump_stack_lvl+0x137/0x1a0
[ 472.075308] print_report+0x101/0x250
[ 472.075308] ? __virt_addr_valid+0x77/0x160
[ 472.075308] ? mutex_lock+0x68/0xc0
[ 472.075308] kasan_report+0x139/0x170
[ 472.075308] ? mutex_lock+0x68/0xc0
[ 472.075308] kasan_check_range+0x2c3/0x2e0
[ 472.075308] mutex_lock+0x68/0xc0
[ 472.075308] l2cap_chan_timeout+0x181/0x300
[ 472.075308] process_one_work+0x5d2/0xe00
[ 472.075308] worker_thread+0xe1d/0x1660
[ 472.075308] ? pr_cont_work+0x5e0/0x5e0
[ 472.075308] kthread+0x2b7/0x350
[ 472.075308] ? pr_cont_work+0x5e0/0x5e0
[ 472.075308] ? kthread_blkcg+0xd0/0xd0
[ 472.075308] ret_from_fork+0x4d/0x80
[ 472.075308] ? kthread_blkcg+0xd0/0xd0
[ 472.075308] ret_from_fork_asm+0x11/0x20
[ 472.075308] </TASK>
[ 472.075308] ==================================================================
[ 472.094860] Disabling lock debugging due to kernel taint
[ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 472.096136] #PF: supervisor write access in kernel mode
[ 472.096136] #PF: error_code(0x0002) - not-present page
[ 472.096136] PGD 0 P4D 0
[ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
[ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36
[ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[ 472.096136] Workqueue: events l2cap_chan_timeout
[ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[ 472.096136] Call Trace:
[ 472.096136] <TASK>
[ 472.096136] ? __die_body+0x8d/0xe0
[ 472.096136] ? page_fault_oops+0x6b8/0x9a0
[ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0
[ 472.096136] ? do_user_addr_fault+0x1027/0x1340
[ 472.096136] ? _printk+0x7a/0xa0
[ 472.096136] ? mutex_lock+0x68/0xc0
[ 472.096136] ? add_taint+0x42/0xd0
[ 472.096136] ? exc_page_fault+0x6a/0x1b0
[ 472.096136] ? asm_exc_page_fault+0x26/0x30
[ 472.096136] ? mutex_lock+0x75/0xc0
[ 472.096136] ? mutex_lock+0x88/0xc0
[ 472.096136] ? mutex_lock+0x75/0xc0
[ 472.096136] l2cap_chan_timeout+0x181/0x300
[ 472.096136] process_one_work+0x5d2/0xe00
[ 472.096136] worker_thread+0xe1d/0x1660
[ 472.096136] ? pr_cont_work+0x5e0/0x5e0
[ 472.096136] kthread+0x2b7/0x350
[ 472.096136] ? pr_cont_work+0x5e0/0x5e0
[ 472.096136] ? kthread_blkcg+0xd0/0xd0
[ 472.096136] ret_from_fork+0x4d/0x80
[ 472.096136] ? kthread_blkcg+0xd0/0xd0
[ 472.096136] ret_from_fork_asm+0x11/0x20
[ 472.096136] </TASK>
[ 472.096136] Modules linked in:
[ 472.096136] CR2: 0000000000000158
[ 472.096136] ---[ end trace 0000000000000000 ]---
[ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[ 472.132932] Kernel panic - not syncing: Fatal exception
[ 472.132932] Kernel Offset: disabled
[ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]---

Add a check to judge whether the conn is null in l2cap_chan_timeout()
in order to mitigate the bug.

Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: compute LE flow credits based on recvbuf space

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's re

Bluetooth: compute LE flow credits based on recvbuf space

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's receive buffer was
full. This meant that no back-pressure
was applied to the sender, thus it continued to
send data, resulting in data loss without any
error being reported. Furthermore, the amount
of credits was essentially fixed to a small
amount, leading to reduced performance.

This is fixed by computing the number of returned
LE flow credits based on the estimated available
space in the receive buffer of an L2CAP socket.
Consequently, if the receive buffer is full, no
credits are returned until the buffer is read and
thus cleared by user-space.

Since the computation of available receive buffer
space can only be performed approximately (due to
sk_buff overhead) and the receive buffer size may
be changed by user-space after flow credits have
been sent, superfluous received data is temporary
stored within l2cap_pinfo. This is necessary
because Bluetooth LE provides no retransmission
mechanism once the data has been acked by the
physical layer.

If receive buffer space estimation is not possible
at the moment, we fall back to providing credits
for one full packet as before. This is currently
the case during connection setup, when MPS is not
yet available.

Fixes: b1c325c23d75 ("Bluetooth: Implement returning of LE L2CAP credits")
Signed-off-by: Sebastian Urban <surban@surban.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow sin

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.

Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.

divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()

commit 4d7b41c0e43995b0e992b9f8903109275744b658 upstream.

Extend a critical section to prevent chan from early freeing.
Also make the l2

Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()

commit 4d7b41c0e43995b0e992b9f8903109275744b658 upstream.

Extend a critical section to prevent chan from early freeing.
Also make the l2cap_connect() return type void. Nothing is using the
returned value but it is ugly to return a potentially freed pointer.
Making it void will help with backports because earlier kernels did use
the return value. Now the compile will break for kernels where this
patch is not a complete fix.

Call stack summary:

[use]
l2cap_bredr_sig_cmd
l2cap_connect
┌ mutex_lock(&conn->chan_lock);
│ chan = pchan->ops->new_connection(pchan); <- alloc chan
│ __l2cap_chan_add(conn, chan);
│ l2cap_chan_hold(chan);
│ list_add(&chan->list, &conn->chan_l); ... (1)
└ mutex_unlock(&conn->chan_lock);
chan->conf_state ... (4) <- use after free

[free]
l2cap_conn_del
┌ mutex_lock(&conn->chan_lock);
│ foreach chan in conn->chan_l: ... (2)
│ l2cap_chan_put(chan);
│ l2cap_chan_destroy
│ kfree(chan) ... (3) <- chan freed
└ mutex_unlock(&conn->chan_lock);

==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read
include/linux/instrumented.h:68 [inline]
BUG: KASAN: slab-use-after-free in _test_bit
include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0
net/bluetooth/l2cap_core.c:4260
Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311

Fixes: 73ffa904b782 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del().

Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del(). When we use l2cap_chan_del() to delete the
channel, the chan->conn will be set to null. But the conn could
be dereferenced again in the mutex_lock() of l2cap_chan_timeout().
As a result the null pointer dereference bug will happen. The
KASAN report triggered by POC is shown below:

[ 472.074580] ==================================================================
[ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0
[ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7
[ 472.075308]
[ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36
[ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[ 472.075308] Workqueue: events l2cap_chan_timeout
[ 472.075308] Call Trace:
[ 472.075308] <TASK>
[ 472.075308] dump_stack_lvl+0x137/0x1a0
[ 472.075308] print_report+0x101/0x250
[ 472.075308] ? __virt_addr_valid+0x77/0x160
[ 472.075308] ? mutex_lock+0x68/0xc0
[ 472.075308] kasan_report+0x139/0x170
[ 472.075308] ? mutex_lock+0x68/0xc0
[ 472.075308] kasan_check_range+0x2c3/0x2e0
[ 472.075308] mutex_lock+0x68/0xc0
[ 472.075308] l2cap_chan_timeout+0x181/0x300
[ 472.075308] process_one_work+0x5d2/0xe00
[ 472.075308] worker_thread+0xe1d/0x1660
[ 472.075308] ? pr_cont_work+0x5e0/0x5e0
[ 472.075308] kthread+0x2b7/0x350
[ 472.075308] ? pr_cont_work+0x5e0/0x5e0
[ 472.075308] ? kthread_blkcg+0xd0/0xd0
[ 472.075308] ret_from_fork+0x4d/0x80
[ 472.075308] ? kthread_blkcg+0xd0/0xd0
[ 472.075308] ret_from_fork_asm+0x11/0x20
[ 472.075308] </TASK>
[ 472.075308] ==================================================================
[ 472.094860] Disabling lock debugging due to kernel taint
[ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 472.096136] #PF: supervisor write access in kernel mode
[ 472.096136] #PF: error_code(0x0002) - not-present page
[ 472.096136] PGD 0 P4D 0
[ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
[ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36
[ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[ 472.096136] Workqueue: events l2cap_chan_timeout
[ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[ 472.096136] Call Trace:
[ 472.096136] <TASK>
[ 472.096136] ? __die_body+0x8d/0xe0
[ 472.096136] ? page_fault_oops+0x6b8/0x9a0
[ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0
[ 472.096136] ? do_user_addr_fault+0x1027/0x1340
[ 472.096136] ? _printk+0x7a/0xa0
[ 472.096136] ? mutex_lock+0x68/0xc0
[ 472.096136] ? add_taint+0x42/0xd0
[ 472.096136] ? exc_page_fault+0x6a/0x1b0
[ 472.096136] ? asm_exc_page_fault+0x26/0x30
[ 472.096136] ? mutex_lock+0x75/0xc0
[ 472.096136] ? mutex_lock+0x88/0xc0
[ 472.096136] ? mutex_lock+0x75/0xc0
[ 472.096136] l2cap_chan_timeout+0x181/0x300
[ 472.096136] process_one_work+0x5d2/0xe00
[ 472.096136] worker_thread+0xe1d/0x1660
[ 472.096136] ? pr_cont_work+0x5e0/0x5e0
[ 472.096136] kthread+0x2b7/0x350
[ 472.096136] ? pr_cont_work+0x5e0/0x5e0
[ 472.096136] ? kthread_blkcg+0xd0/0xd0
[ 472.096136] ret_from_fork+0x4d/0x80
[ 472.096136] ? kthread_blkcg+0xd0/0xd0
[ 472.096136] ret_from_fork_asm+0x11/0x20
[ 472.096136] </TASK>
[ 472.096136] Modules linked in:
[ 472.096136] CR2: 0000000000000158
[ 472.096136] ---[ end trace 0000000000000000 ]---
[ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[ 472.132932] Kernel panic - not syncing: Fatal exception
[ 472.132932] Kernel Offset: disabled
[ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]---

Add a check to judge whether the conn is null in l2cap_chan_timeout()
in order to mitigate the bug.

Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: compute LE flow credits based on recvbuf space

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's re

Bluetooth: compute LE flow credits based on recvbuf space

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ]

Previously LE flow credits were returned to the
sender even if the socket's receive buffer was
full. This meant that no back-pressure
was applied to the sender, thus it continued to
send data, resulting in data loss without any
error being reported. Furthermore, the amount
of credits was essentially fixed to a small
amount, leading to reduced performance.

This is fixed by computing the number of returned
LE flow credits based on the estimated available
space in the receive buffer of an L2CAP socket.
Consequently, if the receive buffer is full, no
credits are returned until the buffer is read and
thus cleared by user-space.

Since the computation of available receive buffer
space can only be performed approximately (due to
sk_buff overhead) and the receive buffer size may
be changed by user-space after flow credits have
been sent, superfluous received data is temporary
stored within l2cap_pinfo. This is necessary
because Bluetooth LE provides no retransmission
mechanism once the data has been acked by the
physical layer.

If receive buffer space estimation is not possible
at the moment, we fall back to providing credits
for one full packet as before. This is currently
the case during connection setup, when MPS is not
yet available.

Fixes: b1c325c23d75 ("Bluetooth: Implement returning of LE L2CAP credits")
Signed-off-by: Sebastian Urban <surban@surban.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow sin

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.

Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.

divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()

commit 4d7b41c0e43995b0e992b9f8903109275744b658 upstream.

Extend a critical section to prevent chan from early freeing.
Also make the l2

Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()

commit 4d7b41c0e43995b0e992b9f8903109275744b658 upstream.

Extend a critical section to prevent chan from early freeing.
Also make the l2cap_connect() return type void. Nothing is using the
returned value but it is ugly to return a potentially freed pointer.
Making it void will help with backports because earlier kernels did use
the return value. Now the compile will break for kernels where this
patch is not a complete fix.

Call stack summary:

[use]
l2cap_bredr_sig_cmd
l2cap_connect
┌ mutex_lock(&conn->chan_lock);
│ chan = pchan->ops->new_connection(pchan); <- alloc chan
│ __l2cap_chan_add(conn, chan);
│ l2cap_chan_hold(chan);
│ list_add(&chan->list, &conn->chan_l); ... (1)
└ mutex_unlock(&conn->chan_lock);
chan->conf_state ... (4) <- use after free

[free]
l2cap_conn_del
┌ mutex_lock(&conn->chan_lock);
│ foreach chan in conn->chan_l: ... (2)
│ l2cap_chan_put(chan);
│ l2cap_chan_destroy
│ kfree(chan) ... (3) <- chan freed
└ mutex_unlock(&conn->chan_lock);

==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read
include/linux/instrumented.h:68 [inline]
BUG: KASAN: slab-use-after-free in _test_bit
include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0
net/bluetooth/l2cap_core.c:4260
Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311

Fixes: 73ffa904b782 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del().

Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout

[ Upstream commit adf0398cee86643b8eacde95f17d073d022f782c ]

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del(). When we use l2cap_chan_del() to delete the
channel, the chan->conn will be set to null. But the conn could
be dereferenced again in the mutex_lock() of l2cap_chan_timeout().
As a result the null pointer dereference bug will happen. The
KASAN report triggered by POC is shown below:

[ 472.074580] ==================================================================
[ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0
[ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7
[ 472.075308]
[ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36
[ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[ 472.075308] Workqueue: events l2cap_chan_timeout
[ 472.075308] Call Trace:
[ 472.075308] <TASK>
[ 472.075308] dump_stack_lvl+0x137/0x1a0
[ 472.075308] print_report+0x101/0x250
[ 472.075308] ? __virt_addr_valid+0x77/0x160
[ 472.075308] ? mutex_lock+0x68/0xc0
[ 472.075308] kasan_report+0x139/0x170
[ 472.075308] ? mutex_lock+0x68/0xc0
[ 472.075308] kasan_check_range+0x2c3/0x2e0
[ 472.075308] mutex_lock+0x68/0xc0
[ 472.075308] l2cap_chan_timeout+0x181/0x300
[ 472.075308] process_one_work+0x5d2/0xe00
[ 472.075308] worker_thread+0xe1d/0x1660
[ 472.075308] ? pr_cont_work+0x5e0/0x5e0
[ 472.075308] kthread+0x2b7/0x350
[ 472.075308] ? pr_cont_work+0x5e0/0x5e0
[ 472.075308] ? kthread_blkcg+0xd0/0xd0
[ 472.075308] ret_from_fork+0x4d/0x80
[ 472.075308] ? kthread_blkcg+0xd0/0xd0
[ 472.075308] ret_from_fork_asm+0x11/0x20
[ 472.075308] </TASK>
[ 472.075308] ==================================================================
[ 472.094860] Disabling lock debugging due to kernel taint
[ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 472.096136] #PF: supervisor write access in kernel mode
[ 472.096136] #PF: error_code(0x0002) - not-present page
[ 472.096136] PGD 0 P4D 0
[ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
[ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36
[ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[ 472.096136] Workqueue: events l2cap_chan_timeout
[ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[ 472.096136] Call Trace:
[ 472.096136] <TASK>
[ 472.096136] ? __die_body+0x8d/0xe0
[ 472.096136] ? page_fault_oops+0x6b8/0x9a0
[ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0
[ 472.096136] ? do_user_addr_fault+0x1027/0x1340
[ 472.096136] ? _printk+0x7a/0xa0
[ 472.096136] ? mutex_lock+0x68/0xc0
[ 472.096136] ? add_taint+0x42/0xd0
[ 472.096136] ? exc_page_fault+0x6a/0x1b0
[ 472.096136] ? asm_exc_page_fault+0x26/0x30
[ 472.096136] ? mutex_lock+0x75/0xc0
[ 472.096136] ? mutex_lock+0x88/0xc0
[ 472.096136] ? mutex_lock+0x75/0xc0
[ 472.096136] l2cap_chan_timeout+0x181/0x300
[ 472.096136] process_one_work+0x5d2/0xe00
[ 472.096136] worker_thread+0xe1d/0x1660
[ 472.096136] ? pr_cont_work+0x5e0/0x5e0
[ 472.096136] kthread+0x2b7/0x350
[ 472.096136] ? pr_cont_work+0x5e0/0x5e0
[ 472.096136] ? kthread_blkcg+0xd0/0xd0
[ 472.096136] ret_from_fork+0x4d/0x80
[ 472.096136] ? kthread_blkcg+0xd0/0xd0
[ 472.096136] ret_from_fork_asm+0x11/0x20
[ 472.096136] </TASK>
[ 472.096136] Modules linked in:
[ 472.096136] CR2: 0000000000000158
[ 472.096136] ---[ end trace 0000000000000000 ]---
[ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[ 472.132932] Kernel panic - not syncing: Fatal exception
[ 472.132932] Kernel Offset: disabled
[ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]---

Add a check to judge whether the conn is null in l2cap_chan_timeout()
in order to mitigate the bug.

Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the

Bluetooth: HCI: Remove HCI_AMP support

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ]

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...