Bluetooth: Remove BT_HS

[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ]

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

h

Bluetooth: Remove BT_HS

[ Upstream commit e7b02296fb400ee64822fbdd81a0718449066333 ]

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/

Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED

This adds CONFIG_BT_LE_L2CAP_ECRED which can be used to enable L2CAP
Enhanced Credit Flow Control Mode by default, previously it was only
possible to set it v

Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED

This adds CONFIG_BT_LE_L2CAP_ECRED which can be used to enable L2CAP
Enhanced Credit Flow Control Mode by default, previously it was only
possible to set it via module parameter (e.g. bluetooth.enable_ecred=1).

Since L2CAP ECRED mode is required by the likes of EATT which is
recommended for LE Audio this enables it by default.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-By: Tedd Ho-Jeong An <tedd.an@intel.com>

show more ...

Bluetooth: Add initial implementation of CIS connections

This adds the initial implementation of CIS connections and introduces
the ISO packets/links.

== Central: Set CIG Parameters, create a CIS a

Bluetooth: Add initial implementation of CIS connections

This adds the initial implementation of CIS connections and introduces
the ISO packets/links.

== Central: Set CIG Parameters, create a CIS and Setup Data Path ==

> tools/isotest -s <address>

< HCI Command: LE Extended Create... (0x08|0x0043) plen 26
...
> HCI Event: Command Status (0x0f) plen 4
LE Extended Create Connection (0x08|0x0043) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 31
LE Enhanced Connection Complete (0x0a)
...
< HCI Command: LE Create Connected... (0x08|0x0064) plen 5
...
> HCI Event: Command Status (0x0f) plen 4
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
...
< HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13
...
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 257
< HCI Command: LE Setup Isochronou.. (0x08|0x006e) plen 13
...
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 257

== Peripheral: Accept CIS and Setup Data Path ==

> tools/isotest -d

HCI Event: LE Meta Event (0x3e) plen 7
LE Connected Isochronous Stream Request (0x1a)
...
< HCI Command: LE Accept Co.. (0x08|0x0066) plen 2
...
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
...
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13
...
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 257
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13
...
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 257

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Add support for reading AOSP vendor capabilities

When drivers indicate support for AOSP vendor extension, initialize them
and read its capabilities.

Signed-off-by: Marcel Holtmann <marce

Bluetooth: Add support for reading AOSP vendor capabilities

When drivers indicate support for AOSP vendor extension, initialize them
and read its capabilities.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

net: remove redundant 'depends on NET'

These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.

Remove 'depends on NET', which we know it is already met.

Signed-off-by: Masa

net: remove redundant 'depends on NET'

These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.

Remove 'depends on NET', which we know it is already met.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Bluetooth: Disable High Speed by default

Bluetooth High Speed requires hardware support which is very uncommon
nowadays since HS has not pickup interest by the industry.

Signed-off-by: Luiz Augusto

Bluetooth: Disable High Speed by default

Bluetooth High Speed requires hardware support which is very uncommon
nowadays since HS has not pickup interest by the industry.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Replace HTTP links with HTTPS ones: BLUETOOTH SUBSYSTEM

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algo

Replace HTTP links with HTTPS ones: BLUETOOTH SUBSYSTEM

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: Introduce debug feature when dynamic debug is disabled

In case dynamic debug is disabled, this feature allows a vendor platform
to provide debug statement printing.

Signed-off-by: Marcel

Bluetooth: Introduce debug feature when dynamic debug is disabled

In case dynamic debug is disabled, this feature allows a vendor platform
to provide debug statement printing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: Add framework for Microsoft vendor extension

Micrsoft defined a set for HCI vendor extensions. Check the following
link for details:

https://docs.microsoft.com/en-us/windows-hardware/dri

Bluetooth: Add framework for Microsoft vendor extension

Micrsoft defined a set for HCI vendor extensions. Check the following
link for details:

https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events

This provides the basic framework to enable the extension and read its
supported features. Drivers still have to declare support for this
extension before it can be utilized by the host stack.

Signed-off-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: Move debugfs configuration above the selftests

This is just a cosmetic clean to move the selftests configuration option
to the bottom of the list of options.

Signed-off-by: Marcel Holtma

Bluetooth: Move debugfs configuration above the selftests

This is just a cosmetic clean to move the selftests configuration option
to the bottom of the list of options.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

crypto: skcipher - rename the crypto_blkcipher module and kconfig option

Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to cry

crypto: skcipher - rename the crypto_blkcipher module and kconfig option

Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:

CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

bluetooth: switch to AES library

The bluetooth code uses a bare AES cipher for the encryption operations.
Given that it carries out a set_key() operation right before every
encryption operation, thi

bluetooth: switch to AES library

The bluetooth code uses a bare AES cipher for the encryption operations.
Given that it carries out a set_key() operation right before every
encryption operation, this is clearly not a hot path, and so the use of
the cipher interface (which provides the best implementation available
on the system) is not really required.

In fact, when using a cipher like AES-NI or AES-CE, both the set_key()
and the encrypt() operations involve en/disabling preemption as well as
stacking and unstacking the SIMD context, and this is most certainly
not worth it for encrypting 16 bytes of data.

So let's switch to the new lightweight library interface instead.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Revert "Bluetooth: Add option for disabling legacy ioctl interfaces"

This reverts commit dbbccdc4ced015cdd4051299bd87fbe0254ad351.

It turns out that the "legacy" users aren't so legacy at all, and

Revert "Bluetooth: Add option for disabling legacy ioctl interfaces"

This reverts commit dbbccdc4ced015cdd4051299bd87fbe0254ad351.

It turns out that the "legacy" users aren't so legacy at all, and that
turning off the legacy ioctl will break the current Qt bluetooth stack
for bluetooth LE devices that were released just a couple of months ago.

So it's simply not true that this was a legacy interface that hasn't
been needed and is only limited to old legacy BT devices. Because I
actually read Kconfig help messages, and actively try to turn off
features that I don't need, I turned the option off.

Then I spent _way_ too much time debugging BLE issues until I realized
that it wasn't the Qt and subsurface development that had broken one of
my dive computer BLE downloads, but simply my broken kernel config.

Maybe in a decade it will be true that this is a legacy interface. And
maybe with a better help-text and correct dependencies, this kind of
legacy removal might be acceptable. But as things are right now both
the commit message and the Kconfig help text were misleading, and the
Kconfig option had the wrong dependenencies.

There's no reason to keep that broken Kconfig option in the tree.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

Bluetooth: Add option for disabling legacy ioctl interfaces

The legacy ioctl interfaces are only useful for BR/EDR operation and
since Linux 3.4 no longer needed anyway. This options allows disablin

Bluetooth: Add option for disabling legacy ioctl interfaces

The legacy ioctl interfaces are only useful for BR/EDR operation and
since Linux 3.4 no longer needed anyway. This options allows disabling
them alltogether and use only management interfaces for setup and
control.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: document config options

Kernel config options should include useful help text; I had to look
up the terms on wikipedia.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Marcel H

Bluetooth: document config options

Kernel config options should include useful help text; I had to look
up the terms on wikipedia.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: convert smp and selftest to crypto kpp API

* Convert both smp and selftest to crypto kpp API
* Remove module ecc as no more required
* Add ecdh_helper functions for wrapping kpp async cal

Bluetooth: convert smp and selftest to crypto kpp API

* Convert both smp and selftest to crypto kpp API
* Remove module ecc as no more required
* Add ecdh_helper functions for wrapping kpp async calls

This patch has been tested *only* with selftest, which is called on
module loading.

Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: add LED trigger for indicating HCI is powered up

Add support for LED triggers to the Bluetooth subsystem and add kernel
config symbol BT_LEDS for it.

For now one trigger for indicating "

Bluetooth: add LED trigger for indicating HCI is powered up

Add support for LED triggers to the Bluetooth subsystem and add kernel
config symbol BT_LEDS for it.

For now one trigger for indicating "HCI is powered up" is supported.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: Add BT_HS config option

Move A2MP Module under BT_HS config option and allow
the user have flexible option to choose the feature only
they need

a2mp_discover_amp() & a2mp_channel_create(

Bluetooth: Add BT_HS config option

Move A2MP Module under BT_HS config option and allow
the user have flexible option to choose the feature only
they need

a2mp_discover_amp() & a2mp_channel_create() are a2mp module
entry point for master and slave, and this is dynamic
invoked depends on the userspace or remote request, then
we defined their implementation depends on BT_HS config

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: Provide option to enable/disable debugfs information

The Bluetooth controllers can export extensive information about
internal states via debugfs. This patch provides an option to
choose

Bluetooth: Provide option to enable/disable debugfs information

The Bluetooth controllers can export extensive information about
internal states via debugfs. This patch provides an option to
choose if these information are provided or not.

For backwards compatibility with existing kernel configuration,
this option defaults to yes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: Add skeleton for SMP self-tests

This patch adds the initial skeleton and kernel config option for SMP
self-tests.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Ma

Bluetooth: Add skeleton for SMP self-tests

This patch adds the initial skeleton and kernel config option for SMP
self-tests.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: Add support for ECDH test cases

This patch adds the test cases for ECDH cryptographic functionality
used by Bluetooth Low Energy Secure Connections feature.

Signed-off-by: Johan Hedberg

Bluetooth: Add support for ECDH test cases

This patch adds the test cases for ECDH cryptographic functionality
used by Bluetooth Low Energy Secure Connections feature.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: Add support for self testing framework

This add support for the Bluetooth self testing framework that allows
running certain test cases of sample data to ensure correctness of its
basic f

Bluetooth: Add support for self testing framework

This add support for the Bluetooth self testing framework that allows
running certain test cases of sample data to ensure correctness of its
basic functionality.

With this patch only the basic framework will be added. It contains
the build magic that allows running this at module loading time or
at late_initcall stage when built into the kernel image.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...

Bluetooth: Add basic support for AES-CMAC

Most of the LE Secure Connections SMP crypto functions build on top of
the AES-CMAC function. This patch adds access to AES-CMAC in the kernel
crypto subsys

Bluetooth: Add basic support for AES-CMAC

Most of the LE Secure Connections SMP crypto functions build on top of
the AES-CMAC function. This patch adds access to AES-CMAC in the kernel
crypto subsystem by allocating a crypto_hash handle for it in a similar
way that we have one for AES-CBC.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

show more ...

Bluetooth: Introduce BT_BREDR and BT_LE config options

The current kernel options do not make it clear which modules are for
Bluetooth Classic (BR/EDR) and which are for Bluetooth Low Energy (LE).

Bluetooth: Introduce BT_BREDR and BT_LE config options

The current kernel options do not make it clear which modules are for
Bluetooth Classic (BR/EDR) and which are for Bluetooth Low Energy (LE).

To make it really clear, introduce BT_BREDR and BT_LE options with
proper dependencies into the different modules. Both new options
default to y to not create a regression with previous kernel config
files.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

show more ...