cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG

In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspici

cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG

In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspicious().

Notably things like unwinding the stack can trigger rcu_dereference()
warnings, which then triggers more unwinding which then triggers more
warnings etc..

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.408156109@infradead.org

show more ...

bug: Use normal relative pointers in 'struct bug_entry'

With CONFIG_GENERIC_BUG_RELATIVE_POINTERS, the addr/file relative
pointers are calculated weirdly: based on the beginning of the bug_entry
str

bug: Use normal relative pointers in 'struct bug_entry'

With CONFIG_GENERIC_BUG_RELATIVE_POINTERS, the addr/file relative
pointers are calculated weirdly: based on the beginning of the bug_entry
struct address, rather than their respective pointer addresses.

Make the relative pointers less surprising to both humans and tools by
calculating them the normal way.

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/f0e05be797a16f4fc2401eeb88c8450dcbe61df6.1652362951.git.jpoimboe@kernel.org

show more ...

bug: Assign values once in bug_get_file_line()

Set bug_get_file_line()'s output parameter values directly rather than
first nullifying them and then conditionally setting new values.

Signed-off-by:

bug: Assign values once in bug_get_file_line()

Set bug_get_file_line()'s output parameter values directly rather than
first nullifying them and then conditionally setting new values.

Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-4-ascull@google.com

show more ...

bug: Factor out a getter for a bug's file line

There is some non-trivial config-based logic to get the file name and
line number associated with a bug. Factor this out to a getter that can
be resuse

bug: Factor out a getter for a bug's file line

There is some non-trivial config-based logic to get the file name and
line number associated with a bug. Factor this out to a getter that can
be resused.

Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-3-ascull@google.com

show more ...

bug: Remove redundant condition check in report_bug

report_bug() will return early if it cannot find a bug corresponding to
the provided address. The subsequent test for the bug will always be
true

bug: Remove redundant condition check in report_bug

report_bug() will return early if it cannot find a bug corresponding to
the provided address. The subsequent test for the bug will always be
true so remove it.

Fixes: 1b4cfe3c0a30d ("lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()")
Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-2-ascull@google.com

show more ...

module: mark module_mutex static

Except for two lockdep asserts module_mutex is only used in module.c.
Remove the two asserts given that the functions they are in are not
exported and just called fr

module: mark module_mutex static

Except for two lockdep asserts module_mutex is only used in module.c.
Remove the two asserts given that the functions they are in are not
exported and just called from the module code, and mark module_mutex
static.

Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>

show more ...

bug: Remove redundant condition check in report_bug

[ Upstream commit 3ad1a6cb0abc63d036fc866bd7c2c5983516dec5 ]

report_bug() will return early if it cannot find a bug corresponding to
the provided

bug: Remove redundant condition check in report_bug

[ Upstream commit 3ad1a6cb0abc63d036fc866bd7c2c5983516dec5 ]

report_bug() will return early if it cannot find a bug corresponding to
the provided address. The subsequent test for the bug will always be
true so remove it.

Fixes: 1b4cfe3c0a30d ("lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()")
Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-2-ascull@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ftrace,bug: Improve traceoff_on_warn

While doing some tracing, I found a huge portion of the per-cpu buffer
was taken by printk/serial output because we're disabling the trace far
too late (after pr

ftrace,bug: Improve traceoff_on_warn

While doing some tracing, I found a huge portion of the per-cpu buffer
was taken by printk/serial output because we're disabling the trace far
too late (after printing the CUT string).

Improve matters for architectures that have GENERIC_BUG + _BUG_FLAGS by
killing the tracer in the exception handler before printing anything
much.

Link: https://lkml.kernel.org/r/20200528145240.GF706495@hirez.programming.kicks-ass.net

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

show more ...

bug: move WARN_ON() "cut here" into exception handler

The original clean up of "cut here" missed the WARN_ON() case (that does
not have a printk message), which was fixed recently by adding an expli

bug: move WARN_ON() "cut here" into exception handler

The original clean up of "cut here" missed the WARN_ON() case (that does
not have a printk message), which was fixed recently by adding an explicit
printk of "cut here". This had the downside of adding a printk() to every
WARN_ON() caller, which reduces the utility of using an instruction
exception to streamline the resulting code. By making this a new BUGFLAG,
all of these can be removed and "cut here" can be handled by the exception
handler.

This was very pronounced on PowerPC, but the effect can be seen on x86 as
well. The resulting text size of a defconfig build shows some small
savings from this patch:

text data bss dec hex filename
19691167 5134320 1646664 26472151 193eed7 vmlinux.before
19676362 5134260 1663048 26473670 193f4c6 vmlinux.after

This change also opens the door for creating something like BUG_MSG(),
where a custom printk() before issuing BUG(), without confusing the "cut
here" line.

Link: http://lkml.kernel.org/r/201908200943.601DD59DCE@keescook
Fixes: 6b15f678fb7d ("include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()

Commit b8347c219649 ("x86/debug: Handle warnings before the notifier
chain, to fix KGDB crash") changed the ordering of fixups, and did n

lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()

Commit b8347c219649 ("x86/debug: Handle warnings before the notifier
chain, to fix KGDB crash") changed the ordering of fixups, and did not
take into account the case of x86 processing non-WARN() and non-BUG()
exceptions. This would lead to output of a false BUG line with no other
information.

In the case of a refcount exception, it would be immediately followed by
the refcount WARN(), producing very strange double-"cut here":

lkdtm: attempting bad refcount_inc() overflow
------------[ cut here ]------------
Kernel BUG at 0000000065f29de5 [verbose debug info unavailable]
------------[ cut here ]------------
refcount_t overflow at lkdtm_REFCOUNT_INC_OVERFLOW+0x6b/0x90 in cat[3065], uid/euid: 0/0
WARNING: CPU: 0 PID: 3065 at kernel/panic.c:657 refcount_error_report+0x9a/0xa4
...

In the prior ordering, exceptions were searched first:

do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
...
if (fixup_exception(regs, trapnr))
return 0;

- if (fixup_bug(regs, trapnr))
- return 0;
-

As a result, fixup_bugs()'s is_valid_bugaddr() didn't take into account
needing to search the exception list first, since that had already
happened.

So, instead of searching the exception list twice (once in
is_valid_bugaddr() and then again in fixup_exception()), just add a
simple sanity check to report_bug() that will immediately bail out if a
BUG() (or WARN()) entry is not found.

Link: http://lkml.kernel.org/r/20180301225934.GA34350@beast
Fixes: b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash")
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

bug: use %pB in BUG and stack protector failure

The BUG and stack protector reports were still using a raw %p. This
changes it to %pB for more meaningful output.

Link: http://lkml.kernel.org/r/201

bug: use %pB in BUG and stack protector failure

The BUG and stack protector reports were still using a raw %p. This
changes it to %pB for more meaningful output.

Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast
Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>,
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

bug: define the "cut here" string in a single place

The "cut here" string is used in a few paths. Define it in a single
place.

Link: http://lkml.kernel.org/r/1510100869-73751-3-git-send-email-kees

bug: define the "cut here" string in a single place

The "cut here" string is used in a few paths. Define it in a single
place.

Link: http://lkml.kernel.org/r/1510100869-73751-3-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

kernel debug: support resetting WARN_ONCE for all architectures

Some architectures store the WARN_ONCE state in the flags field of the
bug_entry. Clear that one too when resetting once state throug

kernel debug: support resetting WARN_ONCE for all architectures

Some architectures store the WARN_ONCE state in the flags field of the
bug_entry. Clear that one too when resetting once state through
/sys/kernel/debug/clear_warn_once

Pointed out by Michael Ellerman

Improves the earlier patch that add clear_warn_once.

[ak@linux.intel.com: add a missing ifdef CONFIG_MODULES]
Link: http://lkml.kernel.org/r/20171020170633.9593-1-andi@firstfloor.org
[akpm@linux-foundation.org: fix unused var warning]
[akpm@linux-foundation.org: Use 0200 for clear_warn_once file, per mpe]
[akpm@linux-foundation.org: clear BUGFLAG_DONE in clear_once_table(), per mpe]
Link: http://lkml.kernel.org/r/20171019204642.7404-1-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

debug: Add _ONCE() logic to report_bug()

Josh suggested moving the _ONCE logic inside the trap handler, using a
bit in the bug_entry::flags field, avoiding the need for the extra
variable.

Sadly th

debug: Add _ONCE() logic to report_bug()

Josh suggested moving the _ONCE logic inside the trap handler, using a
bit in the bug_entry::flags field, avoiding the need for the extra
variable.

Sadly this only works for WARN_ON_ONCE(), since the others have
printk() statements prior to triggering the trap.

Still, this saves a fair amount of text and some data:

text data filename
10682460 4530992 defconfig-build/vmlinux.orig
10665111 4530096 defconfig-build/vmlinux.patched

Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

sched/headers: Prepare to use <linux/rcuupdate.h> instead of <linux/rculist.h> in <linux/sched.h>

We don't actually need the full rculist.h header in sched.h anymore,
we will be able to include the

sched/headers: Prepare to use <linux/rcuupdate.h> instead of <linux/rculist.h> in <linux/sched.h>

We don't actually need the full rculist.h header in sched.h anymore,
we will be able to include the smaller rcupdate.h header instead.

But first update code that relied on the implicit header inclusion.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

lib/bug.c: use common WARN helper

The traceoff_on_warning option doesn't have any effect on s390, powerpc,
arm64, parisc, and sh because there are two different types of WARN
implementations:

1) Th

lib/bug.c: use common WARN helper

The traceoff_on_warning option doesn't have any effect on s390, powerpc,
arm64, parisc, and sh because there are two different types of WARN
implementations:

1) The above mentioned architectures treat WARN() as a special case of a
BUG() exception. They handle warnings in report_bug() in lib/bug.c.

2) All other architectures just call warn_slowpath_*() directly. Their
warnings are handled in warn_slowpath_common() in kernel/panic.c.

Support traceoff_on_warning on all architectures and prevent any future
divergence by using a single common function to emit the warning.

Also remove the '()' from '%pS()', because the parentheses look funky:

[ 45.607629] WARNING: at /root/warn_mod/warn_mod.c:17 .init_dummy+0x20/0x40 [warn_mod]()

Reported-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

lib/bug.c: make panic_on_warn available for all architectures

Christian Borntraeger reported that panic_on_warn doesn't have any
effect on s390.

The panic_on_warn feature was introduced with 9e3961

lib/bug.c: make panic_on_warn available for all architectures

Christian Borntraeger reported that panic_on_warn doesn't have any
effect on s390.

The panic_on_warn feature was introduced with 9e3961a09798 ("kernel: add
panic_on_warn"). However it did care only for the case when
WANT_WARN_ON_SLOWPATH is defined. This is turn is only the case for
architectures which do not have an own __WARN_TAINT defined.

Other architectures which do have __WARN_TAINT defined call report_bug()
for warnings within lib/bug.c which does not call panic() in case
panic_on_warn is set.

Let's simply enable the panic_on_warn feature by adding the same code
like it was added to warn_slowpath_common() in panic.c.

This enables panic_on_warn also for arm64, parisc, powerpc, s390 and sh.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

module: Sanitize RCU usage and locking

Currently the RCU usage in module is an inconsistent mess of RCU and
RCU-sched, this is broken for CONFIG_PREEMPT where synchronize_rcu()
does not imply synchr

module: Sanitize RCU usage and locking

Currently the RCU usage in module is an inconsistent mess of RCU and
RCU-sched, this is broken for CONFIG_PREEMPT where synchronize_rcu()
does not imply synchronize_sched().

Most usage sites use preempt_{dis,en}able() which is RCU-sched, but
(most of) the modification sites use synchronize_rcu(). With the
exception of the module bug list, which actually uses RCU.

Convert everything over to RCU-sched.

Furthermore add lockdep asserts to all sites, because it's not at all
clear to me the required locking is observed, esp. on exported
functions.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

show more ...

lib/bug: Use RCU list ops for module_bug_list

Actually since module_bug_list should be used in BUG context,
we may not need this. But for someone who want to use this
from normal context, this makes

lib/bug: Use RCU list ops for module_bug_list

Actually since module_bug_list should be used in BUG context,
we may not need this. But for someone who want to use this
from normal context, this makes module_bug_list an RCU list.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

show more ...

lib/bug.c: convert printk to pr_foo()

- Coalesce formats

- "WARNING:" prefix unchanged to keep bug format.

- printk(KERN_DEFAULT not converted.

- define pr_fmt without prefix to avoid any default

lib/bug.c: convert printk to pr_foo()

- Coalesce formats

- "WARNING:" prefix unchanged to keep bug format.

- printk(KERN_DEFAULT not converted.

- define pr_fmt without prefix to avoid any default prefix update
(suggested by Joe Perches).

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

taint: add explicit flag to show whether lock dep is still OK.

Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.

Sign

taint: add explicit flag to show whether lock dep is still OK.

Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

show more ...

module: put modules in list much earlier.

Prarit's excellent bug report:
> In recent Fedora releases (F17 & F18) some users have reported seeing
> messages similar to
>
> [ 15.478160] kvm: Could n

module: put modules in list much earlier.

Prarit's excellent bug report:
> In recent Fedora releases (F17 & F18) some users have reported seeing
> messages similar to
>
> [ 15.478160] kvm: Could not allocate 304 bytes percpu data
> [ 15.478174] PERCPU: allocation failed, size=304 align=32, alloc from
> reserved chunk failed
>
> during system boot. In some cases, users have also reported seeing this
> message along with a failed load of other modules.
>
> What is happening is systemd is loading an instance of the kvm module for
> each cpu found (see commit e9bda3b). When the module load occurs the kernel
> currently allocates the modules percpu data area prior to checking to see
> if the module is already loaded or is in the process of being loaded. If
> the module is already loaded, or finishes load, the module loading code
> releases the current instance's module's percpu data.

Now we have a new state MODULE_STATE_UNFORMED, we can insert the
module into the list (and thus guarantee its uniqueness) before we
allocate the per-cpu region.

Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Prarit Bhargava <prarit@redhat.com>

show more ...

bugs, x86: Fix printk levels for panic, softlockups and stack dumps

rsyslog will display KERN_EMERG messages on a connected
terminal. However, these messages are useless/undecipherable
for a genera

bugs, x86: Fix printk levels for panic, softlockups and stack dumps

rsyslog will display KERN_EMERG messages on a connected
terminal. However, these messages are useless/undecipherable
for a general user.

For example, after a softlockup we get:

Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Stack:

Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Call Trace:

Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89
d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89

This happens because the printk levels for these messages are
incorrect. Only an informational message should be displayed on
a terminal.

I modified the printk levels for various messages in the kernel
and tested the output by using the drivers/misc/lkdtm.c kernel
modules (ie, softlockups, panics, hard lockups, etc.) and
confirmed that the console output was still the same and that
the output to the terminals was correct.

For example, in the case of a softlockup we now see the much
more informative:

Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ...
BUG: soft lockup - CPU4 stuck for 60s!

instead of the above confusing messages.

AFAICT, the messages no longer have to be KERN_EMERG. In the
most important case of a panic we set console_verbose(). As for
the other less severe cases the correct data is output to the
console and /var/log/messages.

Successfully tested by me using the drivers/misc/lkdtm.c module.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: dzickus@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

show more ...

modules: Fix module_bug_list list corruption race

With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible

modules: Fix module_bug_list list corruption race

With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible to do most of the module loading in parallel.

However, that whole conversion totally missed the rather obscure code
that adds a new module to the list for BUG() handling. That code was
doubly obscure because (a) the code itself lives in lib/bugs.c (for
dubious reasons) and (b) it gets called from the architecture-specific
"module_finalize()" rather than from generic code.

Calling it from arch-specific code makes no sense what-so-ever to begin
with, and is now actively wrong since that code isn't protected by the
module loading lock any more.

So this commit moves the "module_bug_{finalize,cleanup}()" calls away
from the arch-specific code, and into the generic code - and in the
process protects it with the module_mutex so that the list operations
are now safe.

Future fixups:
- move the module list handling code into kernel/module.c where it
belongs.
- get rid of 'module_bug_list' and just use the regular list of modules
(called 'modules' - imagine that) that we already create and maintain
for other reasons.

Reported-and-tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...