|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8 |
|
| #
8d6e9098 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Create a sparse bitmask for pid filtering
When the trace_pid_list was created, the default pid max was 32768.
Creating a bitmask that can hold one bit for all 32768 took up 4096 (one
page).
tracing: Create a sparse bitmask for pid filtering
When the trace_pid_list was created, the default pid max was 32768.
Creating a bitmask that can hold one bit for all 32768 took up 4096 (one
page). Having a one page bitmask was not much of a problem, and that was
used for mapping pids. But today, systems are bigger and can run more
tasks, and now the default pid_max is usually set to 4194304. Which means
to handle that many pids requires 524288 bytes. Worse yet, the pid_max can
be set to 2^30 (1073741824 or 1G) which would take 134217728 (128M) of
memory to store this array.
Since the pid_list array is very sparsely populated, it is a huge waste of
memory to store all possible bits for each pid when most will not be set.
Instead, use a page table scheme to store the array, and allow this to
handle up to 30 bit pids.
The pid_mask will start out with 256 entries for the first 8 MSB bits.
This will cost 1K for 32 bit architectures and 2K for 64 bit. Each of
these will have a 256 array to store the next 8 bits of the pid (another
1 or 2K). These will hold an 2K byte bitmask (which will cover the LSB
14 bits or 16384 pids).
When the trace_pid_list is allocated, it will have the 1/2K upper bits
allocated, and then it will allocate a cache for the next upper chunks and
the lower chunks (default 6 of each). Then when a bit is "set", these
chunks will be pulled from the free list and added to the array. If the
free list gets down to a lever (default 2), it will trigger an irqwork
that will refill the cache back up.
On clearing a bit, if the clear causes the bitmask to be zero, that chunk
will then be placed back into the free cache for later use, keeping the
need to allocate more down to a minimum.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
show more ...
|
| #
6954e415 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic tha
tracing: Place trace_pid_list logic into abstract functions
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
d9777061 |
| 23-Sep-2021 |
Steven Rostedt (VMware) <rostedt@goodmis.org> |
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
tracing: Place trace_pid_list logic into abstract functions
[ Upstream commit 6954e415264eeb5ee6be0d22d789ad12c995ee64 ]
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|