bpf: keep a reference to the mm, in case the task is dead.

Fix the system crash that happens when a task iterator travel through
vma of tasks.

In task iterators, we used to access mm by following t

bpf: keep a reference to the mm, in case the task is dead.

Fix the system crash that happens when a task iterator travel through
vma of tasks.

In task iterators, we used to access mm by following the pointer on
the task_struct; however, the death of a task will clear the pointer,
even though we still hold the task_struct. That can cause an
unexpected crash for a null pointer when an iterator is visiting a
task that dies during the visit. Keeping a reference of mm on the
iterator ensures we always have a valid pointer to mm.

Co-developed-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reported-by: Nathan Slingerland <slinger@meta.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221216221855.4122288-2-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

bpf: Handle show_fdinfo for the parameterized task BPF iterators

Show information of iterators in the respective files under
/proc/<pid>/fdinfo/.

For example, for a task file iterator with 1723 as

bpf: Handle show_fdinfo for the parameterized task BPF iterators

Show information of iterators in the respective files under
/proc/<pid>/fdinfo/.

For example, for a task file iterator with 1723 as the value of tid
parameter, its fdinfo would look like the following lines.

pos: 0
flags: 02000000
mnt_id: 14
ino: 38
link_type: iter
link_id: 51
prog_tag: a590ac96db22b825
prog_id: 299
target_name: task_file
task_type: TID
tid: 1723

This patch add the last three fields. task_type is the type of the
task parameter. TID means the iterator visit only the thread
specified by tid. The value of tid in the above example is 1723. For
the case of PID task_type, it means the iterator visits only threads
of a process and will show the pid value of the process instead of a
tid.

Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-4-kuifeng@fb.com

show more ...

bpf: Handle bpf_link_info for the parameterized task BPF iterators.

Add new fields to bpf_link_info that users can query it through
bpf_obj_get_info_by_fd().

Signed-off-by: Kui-Feng Lee <kuifeng@fb

bpf: Handle bpf_link_info for the parameterized task BPF iterators.

Add new fields to bpf_link_info that users can query it through
bpf_obj_get_info_by_fd().

Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-3-kuifeng@fb.com

show more ...

bpf: Parameterize task iterators.

Allow creating an iterator that loops through resources of one
thread/process.

People could only create iterators to loop through all resources of
files, vma, and

bpf: Parameterize task iterators.

Allow creating an iterator that loops through resources of one
thread/process.

People could only create iterators to loop through all resources of
files, vma, and tasks in the system, even though they were interested
in only the resources of a specific task or process. Passing the
additional parameters, people can now create an iterator to go
through all resources or only the resources of a task.

Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20220926184957.208194-2-kuifeng@fb.com

show more ...

bpf: remove VMA linked list

Use vma_next() and remove reference to the start of the linked list

Link: https://lkml.kernel.org/r/20220906194824.2110408-51-Liam.Howlett@oracle.com
Signed-off-by: Liam

bpf: remove VMA linked list

Use vma_next() and remove reference to the start of the linked list

Link: https://lkml.kernel.org/r/20220906194824.2110408-51-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

bpf: Remove redundant assignment to meta.seq in __task_seq_show()

The seq argument is assigned to meta.seq twice, the second one is
redundant, remove it.

This patch also removes a redundant space i

bpf: Remove redundant assignment to meta.seq in __task_seq_show()

The seq argument is assigned to meta.seq twice, the second one is
redundant, remove it.

This patch also removes a redundant space in bpf_iter_link_attach().

Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220410060020.307283-1-ytcoode@gmail.com

show more ...

bpf: Introduce btf_tracing_ids

Similar to btf_sock_ids, btf_tracing_ids provides btf ID for task_struct,
file, and vm_area_struct via easy to understand format like
btf_tracing_ids[BTF_TRACING_TYPE_

bpf: Introduce btf_tracing_ids

Similar to btf_sock_ids, btf_tracing_ids provides btf ID for task_struct,
file, and vm_area_struct via easy to understand format like
btf_tracing_ids[BTF_TRACING_TYPE_[TASK|file|VMA]].

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211112150243.1270987-3-songliubraving@fb.com

show more ...

bpf: Introduce helper bpf_find_vma

In some profiler use cases, it is necessary to map an address to the
backing file, e.g., a shared library. bpf_find_vma helper provides a
flexible way to achieve t

bpf: Introduce helper bpf_find_vma

In some profiler use cases, it is necessary to map an address to the
backing file, e.g., a shared library. bpf_find_vma helper provides a
flexible way to achieve this. bpf_find_vma maps an address of a task to
the vma (vm_area_struct) for this address, and feed the vma to an callback
BPF function. The callback function is necessary here, as we need to
ensure mmap_sem is unlocked.

It is necessary to lock mmap_sem for find_vma. To lock and unlock mmap_sem
safely when irqs are disable, we use the same mechanism as stackmap with
build_id. Specifically, when irqs are disabled, the unlocked is postponed
in an irq_work. Refactor stackmap.c so that the irq_work is shared among
bpf_find_vma and stackmap helpers.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211105232330.1936330-2-songliubraving@fb.com

show more ...

bpf: Consolidate task_struct BTF_ID declarations

No need to have it defined 5 times. Once is enough.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link

bpf: Consolidate task_struct BTF_ID declarations

No need to have it defined 5 times. Once is enough.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/6dcefa5bed26fe1226f26683f36819bb53ec19a2.1629772842.git.dxu@dxuuu.xyz

show more ...

bpf: Introduce task_vma bpf_iter

Introduce task_vma bpf_iter to print memory information of a process. It
can be used to print customized information similar to /proc/<pid>/maps.

Current /proc/<pid

bpf: Introduce task_vma bpf_iter

Introduce task_vma bpf_iter to print memory information of a process. It
can be used to print customized information similar to /proc/<pid>/maps.

Current /proc/<pid>/maps and /proc/<pid>/smaps provide information of
vma's of a process. However, these information are not flexible enough to
cover all use cases. For example, if a vma cover mixed 2MB pages and 4kB
pages (x86_64), there is no easy way to tell which address ranges are
backed by 2MB pages. task_vma solves the problem by enabling the user to
generate customize information based on the vma (and vma->vm_mm,
vma->vm_file, etc.).

To access the vma safely in the BPF program, task_vma iterator holds
target mmap_lock while calling the BPF program. If the mmap_lock is
contended, task_vma unlocks mmap_lock between iterations to unblock the
writer(s). This lock contention avoidance mechanism is similar to the one
used in show_smaps_rollup().

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210212183107.50963-2-songliubraving@fb.com

show more ...

bpf: Fix a task_iter bug caused by a merge conflict resolution

Latest bpf tree has a bug for bpf_iter selftest:

$ ./test_progs -n 4/25
test_bpf_sk_storage_get:PASS:bpf_iter_bpf_sk_storage_helpe

bpf: Fix a task_iter bug caused by a merge conflict resolution

Latest bpf tree has a bug for bpf_iter selftest:

$ ./test_progs -n 4/25
test_bpf_sk_storage_get:PASS:bpf_iter_bpf_sk_storage_helpers__open_and_load 0 nsec
test_bpf_sk_storage_get:PASS:socket 0 nsec
...
do_dummy_read:PASS:read 0 nsec
test_bpf_sk_storage_get:FAIL:bpf_map_lookup_elem map value wasn't set correctly
(expected 1792, got -1, err=0)
#4/25 bpf_sk_storage_get:FAIL
#4 bpf_iter:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 2 FAILED

When doing merge conflict resolution, Commit 4bfc4714849d missed to
save curr_task to seq_file private data. The task pointer in seq_file
private data is passed to bpf program. This caused NULL-pointer task
passed to bpf program which will immediately return upon checking
whether task pointer is NULL.

This patch added back the assignment of curr_task to seq_file private
data and fixed the issue.

Fixes: 4bfc4714849d ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201231052418.577024-1-yhs@fb.com

show more ...

bpf: Use thread_group_leader()

Instead of directly comparing task->tgid and task->pid, use the
thread_group_leader() helper. This helps with readability, and
there should be no functional change.

bpf: Use thread_group_leader()

Instead of directly comparing task->tgid and task->pid, use the
thread_group_leader() helper. This helps with readability, and
there should be no functional change.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201218185032.2464558-3-jonathan.lemon@gmail.com

show more ...

bpf: Save correct stopping point in file seq iteration

On some systems, some variant of the following splat is
repeatedly seen. The common factor in all traces seems
to be the entry point to task_f

bpf: Save correct stopping point in file seq iteration

On some systems, some variant of the following splat is
repeatedly seen. The common factor in all traces seems
to be the entry point to task_file_seq_next(). With the
patch, all warnings go away.

rcu: INFO: rcu_sched self-detected stall on CPU
rcu: \x0926-....: (20992 ticks this GP) idle=d7e/1/0x4000000000000002 softirq=81556231/81556231 fqs=4876
\x09(t=21033 jiffies g=159148529 q=223125)
NMI backtrace for cpu 26
CPU: 26 PID: 2015853 Comm: bpftool Kdump: loaded Not tainted 5.6.13-0_fbk4_3876_gd8d1f9bf80bb #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A12 10/08/2018
Call Trace:
<IRQ>
dump_stack+0x50/0x70
nmi_cpu_backtrace.cold.6+0x13/0x50
? lapic_can_unplug_cpu.cold.30+0x40/0x40
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x99/0xc7
rcu_sched_clock_irq.cold.90+0x1b4/0x3aa
? tick_sched_do_timer+0x60/0x60
update_process_times+0x24/0x50
tick_sched_timer+0x37/0x70
__hrtimer_run_queues+0xfe/0x270
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x5e/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:get_pid_task+0x38/0x80
Code: 89 f6 48 8d 44 f7 08 48 8b 00 48 85 c0 74 2b 48 83 c6 55 48 c1 e6 04 48 29 f0 74 19 48 8d 78 20 ba 01 00 00 00 f0 0f c1 50 20 <85> d2 74 27 78 11 83 c2 01 78 0c 48 83 c4 08 c3 31 c0 48 83 c4 08
RSP: 0018:ffffc9000d293dc8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13
RAX: ffff888637c05600 RBX: ffffc9000d293e0c RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000550 RDI: ffff888637c05620
RBP: ffffffff8284eb80 R08: ffff88831341d300 R09: ffff88822ffd8248
R10: ffff88822ffd82d0 R11: 00000000003a93c0 R12: 0000000000000001
R13: 00000000ffffffff R14: ffff88831341d300 R15: 0000000000000000
? find_ge_pid+0x1b/0x20
task_seq_get_next+0x52/0xc0
task_file_seq_get_next+0x159/0x220
task_file_seq_next+0x4f/0xa0
bpf_seq_read+0x159/0x390
vfs_read+0x8a/0x140
ksys_read+0x59/0xd0
do_syscall_64+0x42/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f95ae73e76e
Code: Bad RIP value.
RSP: 002b:00007ffc02c1dbf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000000000170faa0 RCX: 00007f95ae73e76e
RDX: 0000000000001000 RSI: 00007ffc02c1dc30 RDI: 0000000000000007
RBP: 00007ffc02c1ec70 R08: 0000000000000005 R09: 0000000000000006
R10: fffffffffffff20b R11: 0000000000000246 R12: 00000000019112a0
R13: 0000000000000000 R14: 0000000000000007 R15: 00000000004283c0

If unable to obtain the file structure for the current task,
proceed to the next task number after the one returned from
task_seq_get_next(), instead of the next task number from the
original iterator.

Also, save the stopping task number from task_seq_get_next()
on failure in case of restarts.

Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201218185032.2464558-2-jonathan.lemon@gmail.com

show more ...

bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu

When discussing[1] exec and posix file locks it was realized that none
of the callers of get_files_struct fundamentally needed to

bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu

When discussing[1] exec and posix file locks it was realized that none
of the callers of get_files_struct fundamentally needed to call
get_files_struct, and that by switching them to helper functions
instead it will both simplify their code and remove unnecessary
increments of files_struct.count. Those unnecessary increments can
result in exec unnecessarily unsharing files_struct which breaking
posix locks, and it can result in fget_light having to fallback to
fget reducing system performance.

Using task_lookup_next_fd_rcu simplifies task_file_seq_get_next, by
moving the checking for the maximum file descritor into the generic
code, and by remvoing the need for capturing and releasing a reference
on files_struct. As the reference count of files_struct no longer
needs to be maintained bpf_iter_seq_task_file_info can have it's files
member removed and task_file_seq_get_next no longer needs it's fstruct
argument.

The curr_fd local variable does need to become unsigned to be used
with fnext_task. As curr_fd is assigned from and assigned a u32
making curr_fd an unsigned int won't cause problems and might prevent
them.

[1] https://lkml.kernel.org/r/20180915160423.GA31461@redhat.com
Suggested-by: Oleg Nesterov <oleg@redhat.com>
v1: https://lkml.kernel.org/r/20200817220425.9389-11-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20201120231441.29911-16-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

show more ...

file: Replace fcheck_files with files_lookup_fd_rcu

This change renames fcheck_files to files_lookup_fd_rcu. All of the
remaining callers take the rcu_read_lock before calling this function
so the

file: Replace fcheck_files with files_lookup_fd_rcu

This change renames fcheck_files to files_lookup_fd_rcu. All of the
remaining callers take the rcu_read_lock before calling this function
so the _rcu suffix is appropriate. This change also tightens up the
debug check to verify that all callers hold the rcu_read_lock.

All callers that used to call files_check with the files->file_lock
held have now been changed to call files_lookup_fd_locked.

This change of name has helped remind me of which locks and which
guarantees are in place helping me to catch bugs later in the
patchset.

The need for better names became apparent in the last round of
discussion of this set of changes[1].

[1] https://lkml.kernel.org/r/CAHk-=wj8BQbgJFLa+J0e=iT-1qpmCRTbPAJ8gd6MJQ=kbRPqyQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20201120231441.29911-9-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

show more ...

bpf: Simplify task_file_seq_get_next()

Simplify task_file_seq_get_next() by removing two in/out arguments: task
and fstruct. Use info->task and info->files instead.

Signed-off-by: Song Liu <songliu

bpf: Simplify task_file_seq_get_next()

Simplify task_file_seq_get_next() by removing two in/out arguments: task
and fstruct. Use info->task and info->files instead.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201120002833.2481110-1-songliubraving@fb.com

show more ...

bpf: Permit cond_resched for some iterators

Commit e679654a704e ("bpf: Fix a rcu_sched stall issue with
bpf task/task_file iterator") tries to fix rcu stalls warning
which is caused by bpf task_file

bpf: Permit cond_resched for some iterators

Commit e679654a704e ("bpf: Fix a rcu_sched stall issue with
bpf task/task_file iterator") tries to fix rcu stalls warning
which is caused by bpf task_file iterator when running
"bpftool prog".

rcu: INFO: rcu_sched self-detected stall on CPU
rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
\x09(t=21031 jiffies g=2534773 q=179750)
NMI backtrace for cpu 7
CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G W 5.8.0-00004-g68bfc7f8c1b4 #6
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
Call Trace:
<IRQ>
dump_stack+0x57/0x70
nmi_cpu_backtrace.cold+0x14/0x53
? lapic_can_unplug_cpu.cold+0x39/0x39
nmi_trigger_cpumask_backtrace+0xb7/0xc7
rcu_dump_cpu_stacks+0xa2/0xd0
rcu_sched_clock_irq.cold+0x1ff/0x3d9
? tick_nohz_handler+0x100/0x100
update_process_times+0x5b/0x90
tick_sched_timer+0x5e/0xf0
__hrtimer_run_queues+0x12a/0x2a0
hrtimer_interrupt+0x10e/0x280
__sysvec_apic_timer_interrupt+0x51/0xe0
asm_call_on_stack+0xf/0x20
</IRQ>
sysvec_apic_timer_interrupt+0x6f/0x80
...
task_file_seq_next+0x52/0xa0
bpf_seq_read+0xb9/0x320
vfs_read+0x9d/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x60
entry_SYSCALL_64_after_hwframe+0x44/0xa9

The fix is to limit the number of bpf program runs to be
one million. This fixed the program in most cases. But
we also found under heavy load, which can increase the wallclock
time for bpf_seq_read(), the warning may still be possible.

For example, calling bpf_delay() in the "while" loop of
bpf_seq_read(), which will introduce artificial delay,
the warning will show up in my qemu run.

static unsigned q;
volatile unsigned *p = &q;
volatile unsigned long long ll;
static void bpf_delay(void)
{
int i, j;

for (i = 0; i < 10000; i++)
for (j = 0; j < 10000; j++)
ll += *p;
}

There are two ways to fix this issue. One is to reduce the above
one million threshold to say 100,000 and hopefully rcu warning will
not show up any more. Another is to introduce a target feature
which enables bpf_seq_read() calling cond_resched().

This patch took second approach as the first approach may cause
more -EAGAIN failures for read() syscalls. Note that not all bpf_iter
targets can permit cond_resched() in bpf_seq_read() as some, e.g.,
netlink seq iterator, rcu read lock critical section spans through
seq_ops->next() -> seq_ops->show() -> seq_ops->next().

For the kernel code with the above hack, "bpftool p" roughly takes
38 seconds to finish on my VM with 184 bpf program runs.
Using the following command, I am able to collect the number of
context switches:
perf stat -e context-switches -- ./bpftool p >& log
Without this patch,
69 context-switches
With this patch,
75 context-switches
This patch added additional 6 context switches, roughly every 6 seconds
to reschedule, to avoid lengthy no-rescheduling which may cause the
above RCU warnings.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201028061054.1411116-1-yhs@fb.com

show more ...

bpf: Save correct stopping point in file seq iteration

[ Upstream commit 69ca310f34168eae0ada434796bfc22fb4a0fa26 ]

On some systems, some variant of the following splat is
repeatedly seen. The com

bpf: Save correct stopping point in file seq iteration

[ Upstream commit 69ca310f34168eae0ada434796bfc22fb4a0fa26 ]

On some systems, some variant of the following splat is
repeatedly seen. The common factor in all traces seems
to be the entry point to task_file_seq_next(). With the
patch, all warnings go away.

rcu: INFO: rcu_sched self-detected stall on CPU
rcu: \x0926-....: (20992 ticks this GP) idle=d7e/1/0x4000000000000002 softirq=81556231/81556231 fqs=4876
\x09(t=21033 jiffies g=159148529 q=223125)
NMI backtrace for cpu 26
CPU: 26 PID: 2015853 Comm: bpftool Kdump: loaded Not tainted 5.6.13-0_fbk4_3876_gd8d1f9bf80bb #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A12 10/08/2018
Call Trace:
<IRQ>
dump_stack+0x50/0x70
nmi_cpu_backtrace.cold.6+0x13/0x50
? lapic_can_unplug_cpu.cold.30+0x40/0x40
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x99/0xc7
rcu_sched_clock_irq.cold.90+0x1b4/0x3aa
? tick_sched_do_timer+0x60/0x60
update_process_times+0x24/0x50
tick_sched_timer+0x37/0x70
__hrtimer_run_queues+0xfe/0x270
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x5e/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:get_pid_task+0x38/0x80
Code: 89 f6 48 8d 44 f7 08 48 8b 00 48 85 c0 74 2b 48 83 c6 55 48 c1 e6 04 48 29 f0 74 19 48 8d 78 20 ba 01 00 00 00 f0 0f c1 50 20 <85> d2 74 27 78 11 83 c2 01 78 0c 48 83 c4 08 c3 31 c0 48 83 c4 08
RSP: 0018:ffffc9000d293dc8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13
RAX: ffff888637c05600 RBX: ffffc9000d293e0c RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000550 RDI: ffff888637c05620
RBP: ffffffff8284eb80 R08: ffff88831341d300 R09: ffff88822ffd8248
R10: ffff88822ffd82d0 R11: 00000000003a93c0 R12: 0000000000000001
R13: 00000000ffffffff R14: ffff88831341d300 R15: 0000000000000000
? find_ge_pid+0x1b/0x20
task_seq_get_next+0x52/0xc0
task_file_seq_get_next+0x159/0x220
task_file_seq_next+0x4f/0xa0
bpf_seq_read+0x159/0x390
vfs_read+0x8a/0x140
ksys_read+0x59/0xd0
do_syscall_64+0x42/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f95ae73e76e
Code: Bad RIP value.
RSP: 002b:00007ffc02c1dbf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000000000170faa0 RCX: 00007f95ae73e76e
RDX: 0000000000001000 RSI: 00007ffc02c1dc30 RDI: 0000000000000007
RBP: 00007ffc02c1ec70 R08: 0000000000000005 R09: 0000000000000006
R10: fffffffffffff20b R11: 0000000000000246 R12: 00000000019112a0
R13: 0000000000000000 R14: 0000000000000007 R15: 00000000004283c0

If unable to obtain the file structure for the current task,
proceed to the next task number after the one returned from
task_seq_get_next(), instead of the next task number from the
original iterator.

Also, save the stopping task number from task_seq_get_next()
on failure in case of restarts.

Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201218185032.2464558-2-jonathan.lemon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

bpf: Simplify task_file_seq_get_next()

[ Upstream commit 91b2db27d3ff9ad29e8b3108dfbf1e2f49fe9bd3 ]

Simplify task_file_seq_get_next() by removing two in/out arguments: task
and fstruct. Use info->t

bpf: Simplify task_file_seq_get_next()

[ Upstream commit 91b2db27d3ff9ad29e8b3108dfbf1e2f49fe9bd3 ]

Simplify task_file_seq_get_next() by removing two in/out arguments: task
and fstruct. Use info->task and info->files instead.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201120002833.2481110-1-songliubraving@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

bpf: Avoid iterating duplicated files for task_file iterator

Currently, task_file iterator iterates all files from all tasks.
This may potentially visit a lot of duplicated files if there are
many t

bpf: Avoid iterating duplicated files for task_file iterator

Currently, task_file iterator iterates all files from all tasks.
This may potentially visit a lot of duplicated files if there are
many tasks sharing the same files, e.g., typical pthreads
where these pthreads and the main thread are sharing the same files.

This patch changed task_file iterator to skip a particular task
if that task shares the same files as its group_leader (the task
having the same tgid and also task->tgid == task->pid).
This will preserve the same result, visiting all files from all
tasks, and will reduce runtime cost significantl, e.g., if there are
a lot of pthreads and the process has a lot of open files.

Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/bpf/20200902023112.1672792-1-yhs@fb.com

show more ...

bpf: Avoid visit same object multiple times

Currently when traversing all tasks, the next tid
is always increased by one. This may result in
visiting the same task multiple times in a
pid namespace.

bpf: Avoid visit same object multiple times

Currently when traversing all tasks, the next tid
is always increased by one. This may result in
visiting the same task multiple times in a
pid namespace.

This patch fixed the issue by seting the next
tid as pid_nr_ns(pid, ns) + 1, similar to
funciton next_tgid().

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/bpf/20200818222310.2181500-1-yhs@fb.com

show more ...

bpf: Use get_file_rcu() instead of get_file() for task_file iterator

With latest `bpftool prog` command, we observed the following kernel
panic.
BUG: kernel NULL pointer dereference, address: 00

bpf: Use get_file_rcu() instead of get_file() for task_file iterator

With latest `bpftool prog` command, we observed the following kernel
panic.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD dfe894067 P4D dfe894067 PUD deb663067 PMD 0
Oops: 0010 [#1] SMP
CPU: 9 PID: 6023 ...
RIP: 0010:0x0
Code: Bad RIP value.
RSP: 0000:ffffc900002b8f18 EFLAGS: 00010286
RAX: ffff8883a405f400 RBX: ffff888e46a6bf00 RCX: 000000008020000c
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8883a405f400
RBP: ffff888e46a6bf50 R08: 0000000000000000 R09: ffffffff81129600
R10: ffff8883a405f300 R11: 0000160000000000 R12: 0000000000002710
R13: 000000e9494b690c R14: 0000000000000202 R15: 0000000000000009
FS: 00007fd9187fe700(0000) GS:ffff888e46a40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000de5d33002 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
rcu_core+0x1a4/0x440
__do_softirq+0xd3/0x2c8
irq_exit+0x9d/0xa0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0033:0x47ce80
Code: Bad RIP value.
RSP: 002b:00007fd9187fba40 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000002 RBX: 00007fd931789160 RCX: 000000000000010c
RDX: 00007fd9308cdfb4 RSI: 00007fd9308cdfb4 RDI: 00007ffedd1ea0a8
RBP: 00007fd9187fbab0 R08: 000000000000000e R09: 000000000000002a
R10: 0000000000480210 R11: 00007fd9187fc570 R12: 00007fd9316cc400
R13: 0000000000000118 R14: 00007fd9308cdfb4 R15: 00007fd9317a9380

After further analysis, the bug is triggered by
Commit eaaacd23910f ("bpf: Add task and task/file iterator targets")
which introduced task_file bpf iterator, which traverses all open file
descriptors for all tasks in the current namespace.
The latest `bpftool prog` calls a task_file bpf program to traverse
all files in the system in order to associate processes with progs/maps, etc.
When traversing files for a given task, rcu read_lock is taken to
access all files in a file_struct. But it used get_file() to grab
a file, which is not right. It is possible file->f_count is 0 and
get_file() will unconditionally increase it.
Later put_file() may cause all kind of issues with the above
as one of sympotoms.

The failure can be reproduced with the following steps in a few seconds:
$ cat t.c
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>

#define N 10000
int fd[N];
int main() {
int i;

for (i = 0; i < N; i++) {
fd[i] = open("./note.txt", 'r');
if (fd[i] < 0) {
fprintf(stderr, "failed\n");
return -1;
}
}
for (i = 0; i < N; i++)
close(fd[i]);

return 0;
}
$ gcc -O2 t.c
$ cat run.sh
#/bin/bash
for i in {1..100}
do
while true; do ./a.out; done &
done
$ ./run.sh
$ while true; do bpftool prog >& /dev/null; done

This patch used get_file_rcu() which only grabs a file if the
file->f_count is not zero. This is to ensure the file pointer
is always valid. The above reproducer did not fail for more
than 30 minutes.

Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets")
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/bpf/20200817174214.252601-1-yhs@fb.com

show more ...

bpf: Fix pos computation for bpf_iter seq_ops->start()

Currently, the pos pointer in bpf iterator map/task/task_file
seq_ops->start() is always incremented.
This is incorrect. It should be increased

bpf: Fix pos computation for bpf_iter seq_ops->start()

Currently, the pos pointer in bpf iterator map/task/task_file
seq_ops->start() is always incremented.
This is incorrect. It should be increased only if
*pos is 0 (for SEQ_START_TOKEN) since these start()
function actually returns the first real object.
If *pos is not 0, it merely found the object
based on the state in seq->private, and not really
advancing the *pos. This patch fixed this issue
by only incrementing *pos if it is 0.

Note that the old *pos calculation, although not
correct, does not affect correctness of bpf_iter
as bpf_iter seq_file->read() does not support llseek.

This patch also renamed "mid" in bpf_map iterator
seq_file private data to "map_id" for better clarity.

Fixes: 6086d29def80 ("bpf: Add bpf_map iterator")
Fixes: eaaacd23910f ("bpf: Add task and task/file iterator targets")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722195156.4029817-1-yhs@fb.com

show more ...

bpf: Refactor to provide aux info to bpf_iter_init_seq_priv_t

This patch refactored target bpf_iter_init_seq_priv_t callback
function to accept additional information. This will be needed
in later p

bpf: Refactor to provide aux info to bpf_iter_init_seq_priv_t

This patch refactored target bpf_iter_init_seq_priv_t callback
function to accept additional information. This will be needed
in later patches for map element targets since a particular
map should be passed to traverse elements for that particular
map. In the future, other information may be passed to target
as well, e.g., pid, cgroup id, etc. to customize the iterator.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184110.590156-1-yhs@fb.com

show more ...

bpf: Refactor bpf_iter_reg to have separate seq_info member

There is no functionality change for this patch.
Struct bpf_iter_reg is used to register a bpf_iter target,
which includes information for

bpf: Refactor bpf_iter_reg to have separate seq_info member

There is no functionality change for this patch.
Struct bpf_iter_reg is used to register a bpf_iter target,
which includes information for both prog_load, link_create
and seq_file creation.

This patch puts fields related seq_file creation into
a different structure. This will be useful for map
elements iterator where one iterator covers different
map types and different map types may have different
seq_ops, init/fini private_data function and
private_data size.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184109.590030-1-yhs@fb.com

show more ...