Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
1a59d1b8 |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1 |
|
#
674e95ca |
| 09-Oct-2012 |
David Howells <dhowells@redhat.com> |
UAPI: (Scripted) Disintegrate include/sound
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michae
UAPI: (Scripted) Disintegrate include/sound
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
show more ...
|
Revision tags: v3.6, v3.6-rc7, v3.6-rc6 |
|
#
7b31d009 |
| 12-Sep-2012 |
Takashi Iwai <tiwai@suse.de> |
ALSA: Define more channel map positions
For following the standard, define more channel map positions and shuffle the items a bit:
- As both PulseAudio and gstreamer define MONO channel position
ALSA: Define more channel map positions
For following the standard, define more channel map positions and shuffle the items a bit:
- As both PulseAudio and gstreamer define MONO channel position explicitly, we should follow that, too. The mono streams point to this channel position unless they are explicitly assigned to certain channel positions.
- Top-front-* and Top-rear-* positions are added, carried from PulseAudio's definitions.
- Move NA and MONO definitions at the top of table right after UNKNOWN, since these are more abstract in comparison with other practical positions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v3.6-rc5, v3.6-rc4, v3.6-rc3 |
|
#
080108c4 |
| 21-Aug-2012 |
Takashi Iwai <tiwai@suse.de> |
ALSA: Follow channel position definitions to alsa-lib mixer
There is already a set of channel position definitions in alsa-lib mixer.h, and it'd be more practical to keep the same order for the PCM
ALSA: Follow channel position definitions to alsa-lib mixer
There is already a set of channel position definitions in alsa-lib mixer.h, and it'd be more practical to keep the same order for the PCM channel map, too. The value is shifted with 1 to keep zero for UNKNOWN.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v3.6-rc2, v3.6-rc1 |
|
#
2d3391ec |
| 27-Jul-2012 |
Takashi Iwai <tiwai@suse.de> |
ALSA: PCM: channel mapping API implementation
This patch implements the basic data types for the standard channel mapping API handling.
- The definitions of the channel positions and the new TLV ty
ALSA: PCM: channel mapping API implementation
This patch implements the basic data types for the standard channel mapping API handling.
- The definitions of the channel positions and the new TLV types are added in sound/asound.h and sound/tlv.h, so that they can be referred from user-space.
- Introduced a new helper function snd_pcm_add_chmap_ctls() to create control elements representing the channel maps for each PCM (sub)stream.
- Some standard pre-defined channel maps are provided for convenience.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4 |
|
#
7ba1c40b |
| 17-Apr-2012 |
Ricardo Neri <ricardo.neri@ti.com> |
ALSA: Add definitions for CEA-861 Audio InfoFrames
Along with the IEC-60958 channel status word, CEA-861 Audio InfoFrames are used in HDMI and DisplayPort to describe the parameters of the audio str
ALSA: Add definitions for CEA-861 Audio InfoFrames
Along with the IEC-60958 channel status word, CEA-861 Audio InfoFrames are used in HDMI and DisplayPort to describe the parameters of the audio stream. Hence, drivers for such devices may use these definitions to, for instance, fill a CEA-861 data structure and pass it to a display driver to configure an IP.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10 |
|
#
8d448162 |
| 07-Oct-2011 |
Clemens Ladisch <clemens@ladisch.de> |
ALSA: control: add support for ENUMERATED user space controls
Handling of user control elements was implemented for all types except ENUMERATED. This type will be needed for the device-specific mix
ALSA: control: add support for ENUMERATED user space controls
Handling of user control elements was implemented for all types except ENUMERATED. This type will be needed for the device-specific mixers of upcoming FireWire drivers.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2 |
|
#
ab69a490 |
| 15-Nov-2010 |
Clemens Ladisch <clemens@ladisch.de> |
ALSA: pcm: support for period wakeup disabling
This patch allows to disable period interrupts which are not needed when the application relies on a system timer to wake-up and refill the ring buffer
ALSA: pcm: support for period wakeup disabling
This patch allows to disable period interrupts which are not needed when the application relies on a system timer to wake-up and refill the ring buffer. The behavior of the driver is left unchanged, and interrupts are only disabled if the application requests this configuration. The behavior in case of underruns is slightly different, instead of being detected during the period interrupts the underruns are detected when the application calls snd_pcm_update_avail, which in turns forces a refresh of the hw pointer and shows the buffer is empty.
More specifically this patch makes a lot of sense when PulseAudio relies on timer-based scheduling to access audio devices such as HDAudio or Intel SST. Disabling interrupts removes two unwanted wake-ups due to period elapsed events in low-power playback modes. It also simplifies PulseAudio voice modules used for speech calls.
To quote Lennart "This patch looks very interesting and desirable. This is something have long been waiting for."
Support for this in hardware drivers is optional.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1 |
|
#
15c0cee6 |
| 28-May-2010 |
Ben Collins <bcollins@bluecherry.net> |
ALSA: pcm: Define G723 3-bit and 5-bit formats
This defines the 24bps and 40bps (8khz sample rate) G.723 codec formats. They are going to be used once I submit the driver for an mpeg4/g723 compressi
ALSA: pcm: Define G723 3-bit and 5-bit formats
This defines the 24bps and 40bps (8khz sample rate) G.723 codec formats. They are going to be used once I submit the driver for an mpeg4/g723 compression card.
I've updated the signed value to -1 as per Takashi's comments since these are non-linear formats.
Signed-off-by: Ben Collins <bcollins@bluecherry.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v2.6.34 |
|
#
89485d49 |
| 11-May-2010 |
Daniel Mack <daniel@caiaq.de> |
ALSA: include/sound/asound.h whitespace fixups
This fixes some whitespace/indentation flaws I stumbled over.
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Revision tags: v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1 |
|
#
b30477d5 |
| 03-Mar-2010 |
Jaroslav Kysela <perex@perex.cz> |
ALSA: timer - pass real event in snd_timer_notify1() to instance callback
Do not use hardcoded SNDRV_TIMER_EVENT_START value.
Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi
ALSA: timer - pass real event in snd_timer_notify1() to instance callback
Do not use hardcoded SNDRV_TIMER_EVENT_START value.
Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8 |
|
#
5a53a764 |
| 27-Aug-2009 |
Takashi Iwai <tiwai@suse.de> |
ALSA: pcm - Increase protocol version
Increase the PCM protocol version to indicate the drain ioctl behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Revision tags: v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4 |
|
#
8bea869c |
| 27-Apr-2009 |
Jaroslav Kysela <perex@perex.cz> |
ALSA: PCM midlevel: improve fifo_size handling
Move the fifo_size assignment to hw->ioctl callback to allow lowlevel drivers overwrite the default behaviour.
fifo_size is in frames not bytes as spe
ALSA: PCM midlevel: improve fifo_size handling
Move the fifo_size assignment to hw->ioctl callback to allow lowlevel drivers overwrite the default behaviour.
fifo_size is in frames not bytes as specified in asound.h and alsa-lib's documentation, but most hardware have fixed byte based FIFOs. Introduce internal SNDRV_PCM_INFO_FIFO_IN_FRAMES.
Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7 |
|
#
9adfbfb6 |
| 25-Feb-2009 |
Arnd Bergmann <arnd@arndb.de> |
make most exported headers use strict integer types
This takes care of all files that have only a small number of non-strict integer type uses.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Maur
make most exported headers use strict integer types
This takes care of all files that have only a small number of non-strict integer type uses.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Cc: linux-ppp@vger.kernel.org Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
show more ...
|
#
85efde6f |
| 25-Feb-2009 |
Arnd Bergmann <arnd@arndb.de> |
make exported headers use strict posix types
A number of standard posix types are used in exported headers, which is not allowed if __STRICT_KERNEL_NAMES is defined. In order to get rid of the non-_
make exported headers use strict posix types
A number of standard posix types are used in exported headers, which is not allowed if __STRICT_KERNEL_NAMES is defined. In order to get rid of the non-__STRICT_KERNEL_NAMES part and to make sane headers the default, we have to change them all to safe types.
There are also still some leftovers in reiserfs_fs.h, elfcore.h and coda.h, but these files have not compiled in user space for a long time.
This leaves out the various integer types ({u_,u,}int{8,16,32,64}_t), which we take care of separately.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Cc: linux-ppp@vger.kernel.org Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
show more ...
|
#
78a05b52 |
| 11-Mar-2009 |
Takashi Iwai <tiwai@suse.de> |
ALSA: Use define for ioctl definitions
Use define instead of enum for ioctl definitions since strace can't parse ioctls defined via enum properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
#
47e78ecc |
| 11-Mar-2009 |
Takashi Iwai <tiwai@suse.de> |
ALSA: Remove obsolete snd_xferv struct and ioctls
Removed obsleted snd_xferv struct and ioctls that are no longer used in the current codebase.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Revision tags: v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2 |
|
#
bbaf5e97 |
| 24-Oct-2008 |
Takashi Iwai <tiwai@suse.de> |
ALSA: Add hrtimer backend for ALSA timer interface
Added the hrtimer backend for ALSA timer interface. It can be used for the sequencer timer source.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Revision tags: v2.6.28-rc1, v2.6.27 |
|
#
ff33f230 |
| 07-Oct-2008 |
Takashi Iwai <tiwai@suse.de> |
ALSA: Increase components array size
Increase the card components[] (and thus snd_card_info.components[], too) array size from 80 to 128 chars so that more strings can be stored. The 80 chars aren'
ALSA: Increase components array size
Increase the card components[] (and thus snd_card_info.components[], too) array size from 80 to 128 chars so that more strings can be stored. The 80 chars aren't enough for more than 2 HD-audio codecs, and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP 2230s.
The control protocol number is increased to 2.0.6 as well, in case it matters.
Reported-by: Wu Fengguang <wfg@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
show more ...
|
Revision tags: v2.6.27-rc9, v2.6.27-rc8 |
|
#
a99606d2 |
| 24-Sep-2008 |
Takashi Iwai <tiwai@suse.de> |
ALSA: Remove bitwise from snd_pcm_hw_param_t
We have some arithmetic operations against snd_pcm_hw_param_t, thus bitwise isn't correct for it. Better to remove the flag to shut up sparse warnings.
ALSA: Remove bitwise from snd_pcm_hw_param_t
We have some arithmetic operations against snd_pcm_hw_param_t, thus bitwise isn't correct for it. Better to remove the flag to shut up sparse warnings.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
show more ...
|
Revision tags: v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2 |
|
#
030a07e4 |
| 30-Jul-2008 |
Karsten Wiese <fzu@wemgehoertderstaat.de> |
ALSA: Add USB US122L driver
Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Ky
ALSA: Add USB US122L driver
Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
show more ...
|
Revision tags: v2.6.27-rc1, v2.6.26, v2.6.26-rc9 |
|
#
eabe3228 |
| 26-Jun-2008 |
Jaroslav Kysela <perex@perex.cz> |
[ALSA] Revert "alsa: add annotations to bitwise type snd_pcm_hw_param_t"
This reverts commit 36b34d2437104f323e09d7c6af6451d3c0b9c0cd.
From: Al Viro <viro@ZenIV.linux.org.uk>
WIW, *all* this stuff
[ALSA] Revert "alsa: add annotations to bitwise type snd_pcm_hw_param_t"
This reverts commit 36b34d2437104f323e09d7c6af6451d3c0b9c0cd.
From: Al Viro <viro@ZenIV.linux.org.uk>
WIW, *all* this stuff is not bitwise at all. For crying out loud, half of these types are routinely used as array indices and loop variables...
If anything, we want a different set of allowed operations - subtraction between elements of type (yielding integer), addition/subtraction of integer types not bigger than ours (yielding our type), comparisons, assignments (=, +=, -=, passing to function as argument, return from function, initializers) and second/third arguments in ?:. With 0 *not* being allowed as a constant of such type.
It's not bitwise; we may use the same infrastructure in sparse, but it should be a separate class of types (__attribute__((affine))).
dma_addr_t is another candidate for the same treatment, but there we'll need helpers for conversions to hw-acceptable form (dma_to_le32(), etc.) and gradual conversion of drivers.
ALSA ones and pm mess are absolutely straightforward cases, though.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
show more ...
|
Revision tags: v2.6.26-rc8, v2.6.26-rc7 |
|
#
28bb1711 |
| 18-Jun-2008 |
Harvey Harrison <harvey.harrison@gmail.com> |
alsa: add annotations to bitwise type snd_pcm_hw_param_t
Fully half of all alsa sparse warnings are from snd_pcm_hw_param_t degrading to integer type, this goes a long way towards eliminating them.
alsa: add annotations to bitwise type snd_pcm_hw_param_t
Fully half of all alsa sparse warnings are from snd_pcm_hw_param_t degrading to integer type, this goes a long way towards eliminating them.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
show more ...
|
Revision tags: v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3, v2.6.26-rc2, v2.6.26-rc1, v2.6.25, v2.6.25-rc9, v2.6.25-rc8, v2.6.25-rc7, v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3, v2.6.25-rc2, v2.6.25-rc1, v2.6.24, v2.6.24-rc8 |
|
#
8c121586 |
| 11-Jan-2008 |
Jaroslav Kysela <perex@perex.cz> |
[ALSA] PCM interface - rename SNDRV_PCM_TSTAMP_MMAP to SNDRV_PCM_TSTAMP_ENABLE
Change semantics for SNDRV_PCM_TSTAMP_MMAP. Doing timestamping only in the interrupt handler might cause that hw_ptr is
[ALSA] PCM interface - rename SNDRV_PCM_TSTAMP_MMAP to SNDRV_PCM_TSTAMP_ENABLE
Change semantics for SNDRV_PCM_TSTAMP_MMAP. Doing timestamping only in the interrupt handler might cause that hw_ptr is not related to actual timestamp. With this change, grab timestamp at every hw_ptr update to have always valid timestamp + ring buffer position pair. With this change, SNDRV_PCM_TSTAMP_MMAP was renamed to SNDRV_PCM_TSTAMP_ENABLE. It's no regression (I think).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
show more ...
|
#
d948035a |
| 08-Jan-2008 |
Takashi Iwai <tiwai@suse.de> |
[ALSA] Remove PCM xfer_align sw params
The xfer_align sw_params parameter has never been used in a sane manner, and no one understands what this does exactly. The current implementation looks also
[ALSA] Remove PCM xfer_align sw params
The xfer_align sw_params parameter has never been used in a sane manner, and no one understands what this does exactly. The current implementation looks also buggy because it allows write of shorter size than xfer_align. So, if you do partial writes, the write isn't actually aligned at all. Removing this parameter will make some pcm_lib_* code more readable (and less buggy).
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
show more ...
|