ARM: pxa/sa1100: move I/O space to PCI_IOBASE

PXA and StrongARM1100 traditionally map their I/O space 1:1 into virtual
memory, using a per-bus io_offset that matches the base address of the
ioremap

ARM: pxa/sa1100: move I/O space to PCI_IOBASE

PXA and StrongARM1100 traditionally map their I/O space 1:1 into virtual
memory, using a per-bus io_offset that matches the base address of the
ioremap mapping.

In order for PXA to work in a multiplatform config, this needs to
change so I/O space starts at PCI_IOBASE (0xfee00000). Since the pcmcia
soc_common support is shared with StrongARM1100, both have to change at
the same time. The affected machines are:

- Anything with a PCMCIA slot now uses pci_remap_iospace, which
is made available to PCMCIA configurations as well, rather than
just PCI. The first PCMCIA slot now starts at port number 0x10000.

- The Zeus and Viper platforms have PC/104-style ISA buses,
which have a static mapping for both I/O and memory space at
0xf1000000, which can no longer work. It does not appear to have
any in-tree users, so moving it to port number 0 makes them
behave like a traditional PC.

- SA1100 does support ISA slots in theory, but all machines that
originally enabled this appear to have been removed from the tree
ages ago, and the I/O space is never mapped anywhere.

- The Nanoengine machine has support for PCI slots, but looks
like this never included I/O space, the resources only define the
location for memory and config space.

With this, the definitions of __io() and IO_SPACE_LIMIT can be simplified,
as the only remaining cases are the generic PCI_IOBASE and the custom
inb()/outb() macros on RiscPC. S3C24xx still has a custom inb()/outb()
in this here, but this is already removed in another branch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: pxa: move pcmcia board data into mach-pxa

The drivers/pcmcia/pxa2xx_*.c are essentially part of the
board files, but for historic reasons located in drivers/pcmcia.

Move them into the same pla

ARM: pxa: move pcmcia board data into mach-pxa

The drivers/pcmcia/pxa2xx_*.c are essentially part of the
board files, but for historic reasons located in drivers/pcmcia.

Move them into the same place as the actual board file to avoid
lots of machine header inclusions.

Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...