bonding: fix macvlan over alb bond support

The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the

bonding: fix macvlan over alb bond support

The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.

To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.

So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.

Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: bonding: remove kernel-doc comment marker

Change an errant kernel-doc comment marker (/**) to a regular
comment to prevent a kernel-doc warning.

bonding.h:282: warning: This comment starts wit

net: bonding: remove kernel-doc comment marker

Change an errant kernel-doc comment marker (/**) to a regular
comment to prevent a kernel-doc warning.

bonding.h:282: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns NULL if the net_device does not belong to any of the bond's slaves

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/r/20230714045127.18752-2-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: fix stack overflow when LRO is disabled for virtual interfaces

When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation

net: fix stack overflow when LRO is disabled for virtual interfaces

When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.

team0
|
+------+------+-----+-----+
| | | | |
team1 team2 team3 ... team200

If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.

But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.

Reproducer:

ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done

ethtool -K team0 lro off

In order to fix it, the notifier_ctx member of bonding/team is introduced.

Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: bonding: Add SPDX identifier to remaining files

Previous batches of SPDX conversion missed bond_main.c and bonding_priv.h
because these files doesn't mention intended GPL version. Add SPDX iden

net: bonding: Add SPDX identifier to remaining files

Previous batches of SPDX conversion missed bond_main.c and bonding_priv.h
because these files doesn't mention intended GPL version. Add SPDX identifier
to these files, assuming GPL 1.0+.

Cc: Thomas Davis <tadavis@lbl.gov>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

bonding: fix send_peer_notif overflow

Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9
("bonding: add an option to specify a delay between peer notifications").
the bond->send_pe

bonding: fix send_peer_notif overflow

Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9
("bonding: add an option to specify a delay between peer notifications").
the bond->send_peer_notif will be num_peer_notif multiplied by
peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif
overflow easily. e.g.

ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000

To fix the overflow, let's set the send_peer_notif to u32 and limit
peer_notif_delay to 300s.

Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053
Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

bonding: add xdp_features support

Introduce xdp_features support for bonding driver according to the slave
devices attached to the master one. xdp_features is required whenever we
want to xdp_redire

bonding: add xdp_features support

Introduce xdp_features support for bonding driver according to the slave
devices attached to the master one. xdp_features is required whenever we
want to xdp_redirect traffic into a bond device and then into selected
slaves attached to it.

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jussi Maki <joamaki@gmail.com>
Tested-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

bonding: fix ns validation on backup slaves

When arp_validate is set to 2, 3, or 6, validation is performed for
backup slaves as well. As stated in the bond documentation, validation
involves checki

bonding: fix ns validation on backup slaves

When arp_validate is set to 2, 3, or 6, validation is performed for
backup slaves as well. As stated in the bond documentation, validation
involves checking the broadcast ARP request sent out via the active
slave. This helps determine which slaves are more likely to function in
the event of an active slave failure.

However, when the target is an IPv6 address, the NS message sent from
the active interface is not checked on backup slaves. Additionally,
based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr
when checking the NS message.

Note that when checking the NS message, the destination address is a
multicast address. Therefore, we must convert the target address to
solicited multicast in the bond_get_targets_ip6() function.

Prior to the fix, the backup slaves had a mii status of "down", but
after the fix, all of the slaves' mii status was updated to "UP".

Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

bond: Disable TLS features indication

Bond agnostically interacts with TLS device-offload requests via the
.ndo_sk_get_lower_dev operation. Return value is true iff bond
guarantees fixed mapping bet

bond: Disable TLS features indication

Bond agnostically interacts with TLS device-offload requests via the
.ndo_sk_get_lower_dev operation. Return value is true iff bond
guarantees fixed mapping between the TLS connection and a lower netdev.

Due to this nature, the bond TLS device offload features are not
explicitly controllable in the bond layer. As of today, these are
read-only values based on the evaluation of bond_sk_check(). However,
this indication might be incorrect and misleading, when the feature bits
are "fixed" by some dependency features. For example,
NETIF_F_HW_TLS_TX/RX are forcefully cleared in case the corresponding
checksum offload is disabled. But in fact the bond ability to still
offload TLS connections to the lower device is not hurt.

This means that these bits can not be trusted, and hence better become
unused.

This patch revives some old discussion [1] and proposes a much simpler
solution: Clear the bond's TLS features bits. Everyone should stop
reading them.

[1] https://lore.kernel.org/netdev/20210526095747.22446-1-tariqt@nvidia.com/

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221025105300.4718-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: bonding: Share lacpdu_mcast_addr definition

There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same c

net: bonding: Share lacpdu_mcast_addr definition

There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.

Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: bonding: replace dev_trans_start() with the jiffies of the last ARP/NS

The bonding driver piggybacks on time stamps kept by the network stack
for the purpose of the netdev TX watchdog, and this

net: bonding: replace dev_trans_start() with the jiffies of the last ARP/NS

The bonding driver piggybacks on time stamps kept by the network stack
for the purpose of the netdev TX watchdog, and this is problematic
because it does not work with NETIF_F_LLTX devices.

It is hard to say why the driver looks at dev_trans_start() of the
slave->dev, considering that this is updated even by non-ARP/NS probes
sent by us, and even by traffic not sent by us at all (for example PTP
on physical slave devices). ARP monitoring in active-backup mode appears
to still work even if we track only the last TX time of actual ARP
probes.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Bonding: add per-port priority for failover re-selection

Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The

Bonding: add per-port priority for failover re-selection

Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.

This option could only be configured via netlink.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

bonding: guard ns_targets by CONFIG_IPV6

Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save
256 bytes if IPv6 not configed. Also add this protection for function
bond_is_ip6_tar

bonding: guard ns_targets by CONFIG_IPV6

Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save
256 bytes if IPv6 not configed. Also add this protection for function
bond_is_ip6_target_ok() and bond_get_targets_ip6().

Remove the IS_ENABLED() check for bond_opts[] as this will make
BOND_OPT_NS_TARGETS uninitialized if CONFIG_IPV6 not enabled. Add
a dummy bond_option_ns_ip6_targets_set() for this situation.

Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220531063727.224043-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: add per-cpu storage and net->core_stats

Before adding yet another possibly contended atomic_long_t,
it is time to add per-cpu storage for existing ones:
dev->tx_dropped, dev->rx_dropped, and d

net: add per-cpu storage and net->core_stats

Before adding yet another possibly contended atomic_long_t,
it is time to add per-cpu storage for existing ones:
dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler

Because many devices do not have to increment such counters,
allocate the per-cpu storage on demand, so that dev_get_stats()
does not have to spend considerable time folding zero counters.

Note that some drivers have abused these counters which
were supposed to be only used by core networking stack.

v4: should use per_cpu_ptr() in dev_get_stats() (Jakub)
v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo)
v2: add a missing include (reported by kernel test robot <lkp@intel.com>)
Change in netdev_core_stats_alloc() (Jakub)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: jeffreyji <jeffreyji@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

bonding: add new option ns_ip6_target

This patch add a new bonding option ns_ip6_target, which correspond
to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS
request to determine th

bonding: add new option ns_ip6_target

This patch add a new bonding option ns_ip6_target, which correspond
to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS
request to determine the health of the link.

For other related options like the validation, we still use
arp_validate, and will change to ns_validate later.

Note: the sysfs configuration support was removed based on
https://lore.kernel.org/netdev/8863.1645071997@famine

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

bonding: add new parameter ns_targets

Add a new bonding parameter ns_targets to store IPv6 address.
Add required bond_ns_send/rcv functions first before adding
IPv6 address option setting.

Add two

bonding: add new parameter ns_targets

Add a new bonding parameter ns_targets to store IPv6 address.
Add required bond_ns_send/rcv functions first before adding
IPv6 address option setting.

Add two functions bond_send/rcv_validate so we can send/recv
ARP and NS at the same time.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: remove bond_slave_has_mac_rcu()

No caller since v3.16.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: use rcu_dereference_rtnl when get bonding active slave

bond_option_active_slave_get_rcu() should not be used in rtnl_mutex as it
use rcu_dereference(). Replace to rcu_dereference_rtnl() so

bonding: use rcu_dereference_rtnl when get bonding active slave

bond_option_active_slave_get_rcu() should not be used in rtnl_mutex as it
use rcu_dereference(). Replace to rcu_dereference_rtnl() so we also can use
this function in rtnl protected context.

With this update, we can rmeove the rcu_read_lock/unlock in
bonding .ndo_eth_ioctl and .get_ts_info.

Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Bonding: add arp_missed_max option

Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the simila

Bonding: add arp_missed_max option

Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.

Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: bonding: Share lacpdu_mcast_addr definition

[ Upstream commit 1d9a143ee3408349700f44a9197b7ae0e4faae5d ]

There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the

net: bonding: Share lacpdu_mcast_addr definition

[ Upstream commit 1d9a143ee3408349700f44a9197b7ae0e4faae5d ]

There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.

Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 86247aba599e ("net: bonding: Unsync device addresses on ndo_stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

bonding: remove extraneous definitions from bonding.h

All of the symbols either only exist in bond_options.c or nowhere at
all. These symbols were verified to not exist in the code base by
using `gi

bonding: remove extraneous definitions from bonding.h

All of the symbols either only exist in bond_options.c or nowhere at
all. These symbols were verified to not exist in the code base by
using `git grep` and their removal was verified by compiling bonding.ko.

Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net, bonding: Add XDP support to the bonding driver

XDP is implemented in the bonding driver by transparently delegating
the XDP program loading, removal and xmit operations to the bonding
slave dev

net, bonding: Add XDP support to the bonding driver

XDP is implemented in the bonding driver by transparently delegating
the XDP program loading, removal and xmit operations to the bonding
slave devices. The overall goal of this work is that XDP programs
can be attached to a bond device *without* any further changes (or
awareness) necessary to the program itself, meaning the same XDP
program can be attached to a native device but also a bonding device.

Semantics of XDP_TX when attached to a bond are equivalent in such
setting to the case when a tc/BPF program would be attached to the
bond, meaning transmitting the packet out of the bond itself using one
of the bond's configured xmit methods to select a slave device (rather
than XDP_TX on the slave itself). Handling of XDP_TX to transmit
using the configured bonding mechanism is therefore implemented by
rewriting the BPF program return value in bpf_prog_run_xdp. To avoid
performance impact this check is guarded by a static key, which is
incremented when a XDP program is loaded onto a bond device. This
approach was chosen to avoid changes to drivers implementing XDP. If
the slave device does not match the receive device, then XDP_REDIRECT
is transparently used to perform the redirection in order to have
the network driver release the packet from its RX ring. The bonding
driver hashing functions have been refactored to allow reuse with
xdp_buff's to avoid code duplication.

The motivation for this change is to enable use of bonding (and
802.3ad) in hairpinning L4 load-balancers such as [1] implemented with
XDP and also to transparently support bond devices for projects that
use XDP given most modern NICs have dual port adapters. An alternative
to this approach would be to implement 802.3ad in user-space and
implement the bonding load-balancing in the XDP program itself, but
is rather a cumbersome endeavor in terms of slave device management
(e.g. by watching netlink) and requires separate programs for native
vs bond cases for the orchestrator. A native in-kernel implementation
overcomes these issues and provides more flexibility.

Below are benchmark results done on two machines with 100Gbit
Intel E810 (ice) NIC and with 32-core 3970X on sending machine, and
16-core 3950X on receiving machine. 64 byte packets were sent with
pktgen-dpdk at full rate. Two issues [2, 3] were identified with the
ice driver, so the tests were performed with iommu=off and patch [2]
applied. Additionally the bonding round robin algorithm was modified
to use per-cpu tx counters as high CPU load (50% vs 10%) and high rate
of cache misses were caused by the shared rr_tx_counter (see patch
2/3). The statistics were collected using "sar -n dev -u 1 10". On top
of that, for ice, further work is in progress on improving the XDP_TX
numbers [4].

-----------------------| CPU |--| rxpck/s |--| txpck/s |----
without patch (1 dev):
XDP_DROP: 3.15% 48.6Mpps
XDP_TX: 3.12% 18.3Mpps 18.3Mpps
XDP_DROP (RSS): 9.47% 116.5Mpps
XDP_TX (RSS): 9.67% 25.3Mpps 24.2Mpps
-----------------------
with patch, bond (1 dev):
XDP_DROP: 3.14% 46.7Mpps
XDP_TX: 3.15% 13.9Mpps 13.9Mpps
XDP_DROP (RSS): 10.33% 117.2Mpps
XDP_TX (RSS): 10.64% 25.1Mpps 24.0Mpps
-----------------------
with patch, bond (2 devs):
XDP_DROP: 6.27% 92.7Mpps
XDP_TX: 6.26% 17.6Mpps 17.5Mpps
XDP_DROP (RSS): 11.38% 117.2Mpps
XDP_TX (RSS): 14.30% 28.7Mpps 27.4Mpps
--------------------------------------------------------------

RSS: Receive Side Scaling, e.g. the packets were sent to a range of
destination IPs.

[1]: https://cilium.io/blog/2021/05/20/cilium-110#standalonelb
[2]: https://lore.kernel.org/bpf/20210601113236.42651-1-maciej.fijalkowski@intel.com/T/#t
[3]: https://lore.kernel.org/bpf/CAHn8xckNXci+X_Eb2WMv4uVYjO2331UWB2JLtXr_58z0Av8+8A@mail.gmail.com/
[4]: https://lore.kernel.org/bpf/20210805230046.28715-1-maciej.fijalkowski@intel.com/T/#t

Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210731055738.16820-4-joamaki@gmail.com

show more ...

bonding: add new option lacp_active

Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU fra

bonding: add new option lacp_active

Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".

Note, the LACPDU state frames still will be sent when init or unbind port.

v2: remove module parameter

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

bonding: Add struct bond_ipesc to manage SA

bonding has been supporting ipsec offload.
When SA is added, bonding just passes SA to its own active real interface.
But it doesn't manage SA.
So, when e

bonding: Add struct bond_ipesc to manage SA

bonding has been supporting ipsec offload.
When SA is added, bonding just passes SA to its own active real interface.
But it doesn't manage SA.
So, when events(add/del real interface, active real interface change, etc)
occur, bonding can't handle that well because It doesn't manage SA.
So some problems(panic, UAF, refcnt leak)occur.

In order to make it stable, it should manage SA.
That's the reason why struct bond_ipsec is added.
When a new SA is added to bonding interface, it is stored in the
bond_ipsec list. And the SA is passed to a current active real interface.
If events occur, it uses bond_ipsec data to handle these events.
bond->ipsec_list is protected by bond->ipsec_lock.

If a current active real interface is changed, the following logic works.
1. delete all SAs from old active real interface
2. Add all SAs to the new active real interface.
3. If a new active real interface doesn't support ipsec offload or SA's
option, it sets real_dev to NULL.

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: bonding: Use per-cpu rr_tx_counter

The round-robin rr_tx_counter was shared across CPUs leading to
significant cache thrashing at high packet rates. This patch switches
the round-robin packet c

net: bonding: Use per-cpu rr_tx_counter

The round-robin rr_tx_counter was shared across CPUs leading to
significant cache thrashing at high packet rates. This patch switches
the round-robin packet counter to use a per-cpu variable to decide
the destination slave.

On a test with 2x100Gbit ICE nic with pktgen_sample_04_many_flows.sh
(-s 64 -t 32) the tx rate was 19.6Mpps before and 22.3Mpps after
this patch.

"perf top -e cache_misses" before:
12.31% [bonding] [k] bond_xmit_roundrobin_slave_get
10.59% [sch_fq_codel] [k] fq_codel_dequeue
9.34% [kernel] [k] skb_release_data
after:
15.42% [sch_fq_codel] [k] fq_codel_dequeue
10.06% [kernel] [k] __memset
9.12% [kernel] [k] skb_release_data

Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net/bonding: Declare TLS RX device offload support

Following the description in previous patch (for TX):
As the bond interface is being bypassed by the TLS module, interacting
directly against the l

net/bonding: Declare TLS RX device offload support

Following the description in previous patch (for TX):
As the bond interface is being bypassed by the TLS module, interacting
directly against the lower devs, there is no way for the bond interface
to disable its device offload capabilities, as long as the mode/policy
config allows it.
Hence, the feature flag is not directly controllable, but just reflects
the offload status based on the logic under bond_sk_check().

Here we just declare RX device offload support, and expose it via the
NETIF_F_HW_TLS_RX flag.

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...