Revision tags: v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60 |
|
#
fac58b4a |
| 30-Jul-2021 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
The only actual use is to check in zorro_device_probe() that the device isn't already bound. The driver core already ensures
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
The only actual use is to check in zorro_device_probe() that the device isn't already bound. The driver core already ensures this however so the check can go away which allows to drop the then assigned-only member from struct zorro_dev.
If the value was indeed needed somewhere it can always be calculated by
to_zorro_driver(z->dev.driver)
.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210730191035.1455248-5-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12 |
|
#
7332bc4d |
| 12-Jan-2020 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro: Move zorro_bus_type to bus-private header file
zorro_bus_type was never used outside the Zorro bus code. Hence move it from the public to the bus-private header file.
Signed-off-by: Geert U
zorro: Move zorro_bus_type to bus-private header file
zorro_bus_type was never used outside the Zorro bus code. Hence move it from the public to the bus-private header file.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200112164949.20196-6-geert@linux-m68k.org
show more ...
|
#
1c5b915a |
| 12-Jan-2020 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro: Remove unused zorro_dev_driver()
This function was never used.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200112164949.20196-5-geert@linux-m68
zorro: Remove unused zorro_dev_driver()
This function was never used.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200112164949.20196-5-geert@linux-m68k.org
show more ...
|
#
0cfb07c5 |
| 12-Jan-2020 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro: Make zorro_match_device() static
Unlike its PCI counterpart, zorro_match_device() was never used outside the Zorro bus code.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: ht
zorro: Make zorro_match_device() static
Unlike its PCI counterpart, zorro_match_device() was never used outside the Zorro bus code.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200112164949.20196-2-geert@linux-m68k.org
show more ...
|
Revision tags: v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4 |
|
#
986ea58d |
| 03-Oct-2013 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro/UAPI: Disintegrate include/linux/zorro*.h
The Zorro definitions and device IDs are used by bootstraps, hence they should be exported through UAPI.
Unfortunately zorro.h was never marked for e
zorro/UAPI: Disintegrate include/linux/zorro*.h
The Zorro definitions and device IDs are used by bootstraps, hence they should be exported through UAPI.
Unfortunately zorro.h was never marked for export when headers_install was introduced, so it was forgotten during the big UAPI disintegration. In addition, the removal of zorro_ids.h had been sneaked into commit 7e7a43c32a8970ea2bfc3d1af353dcb1a9237769 ("PCI: don't export device IDs to userspace") before, so it was also forgotten.
Split off and export the Zorro definitions used by bootstraps.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
show more ...
|
Revision tags: v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10 |
|
#
c293738e |
| 29-Jun-2013 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro: Do not allocate zorro_autocon[] statically
Currently the array of Zorro devices is allocated statically, wasting up to 4.5 KiB when running an Amiga or multi-platform kernel on a machine with
zorro: Do not allocate zorro_autocon[] statically
Currently the array of Zorro devices is allocated statically, wasting up to 4.5 KiB when running an Amiga or multi-platform kernel on a machine with no or a handful of Zorro expansion cards. Convert it to conditional dynamic memory allocation to fix this.
amiga_parse_bootinfo() still needs to store some information about the detected Zorro devices, at a time even the bootmem allocator is not yet available. This is now handled using a much smaller array (typically less than 0.5 KiB), which is __initdata and thus freed later.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
show more ...
|
Revision tags: v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3 |
|
#
28f65c11 |
| 09-Jun-2011 |
Joe Perches <joe@perches.com> |
treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.
Done via coccinelle scripts like:
@@ struct resource *ptr; @@
- ptr->end - ptr->sta
treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.
Done via coccinelle scripts like:
@@ struct resource *ptr; @@
- ptr->end - ptr->start + 1 + resource_size(ptr)
and some grep and typing.
Mostly uncompiled, no cross-compilers.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
show more ...
|
Revision tags: v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1 |
|
#
0d305464 |
| 05-Apr-2009 |
Geert Uytterhoeven <geert@linux-m68k.org> |
m68k: amiga - Zorro host bridge platform device conversion
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
Revision tags: v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6 |
|
#
bf54a2b3 |
| 18-Nov-2008 |
Geert Uytterhoeven <geert@linux-m68k.org> |
m68k: amiga - Zorro bus modalias support
Add Amiga Zorro bus modalias and uevent support
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
Revision tags: v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2, v2.6.27-rc1, v2.6.26, v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3, v2.6.26-rc2, v2.6.26-rc1, v2.6.25, v2.6.25-rc9, v2.6.25-rc8, v2.6.25-rc7, v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3, v2.6.25-rc2, v2.6.25-rc1, v2.6.24, v2.6.24-rc8, v2.6.24-rc7, v2.6.24-rc6, v2.6.24-rc5, v2.6.24-rc4, v2.6.24-rc3, v2.6.24-rc2, v2.6.24-rc1, v2.6.23, v2.6.23-rc9, v2.6.23-rc8, v2.6.23-rc7, v2.6.23-rc6, v2.6.23-rc5, v2.6.23-rc4, v2.6.23-rc3, v2.6.23-rc2, v2.6.23-rc1, v2.6.22, v2.6.22-rc7, v2.6.22-rc6, v2.6.22-rc5, v2.6.22-rc4, v2.6.22-rc3, v2.6.22-rc2, v2.6.22-rc1, v2.6.21, v2.6.21-rc7, v2.6.21-rc6, v2.6.21-rc5, v2.6.21-rc4, v2.6.21-rc3, v2.6.21-rc2, v2.6.21-rc1, v2.6.20, v2.6.20-rc7, v2.6.20-rc6, v2.6.20-rc5, v2.6.20-rc4, v2.6.20-rc3, v2.6.20-rc2, v2.6.20-rc1, v2.6.19, v2.6.19-rc6, v2.6.19-rc5, v2.6.19-rc4, v2.6.19-rc3, v2.6.19-rc2, v2.6.19-rc1, v2.6.18, v2.6.18-rc7, v2.6.18-rc6, v2.6.18-rc5, v2.6.18-rc4, v2.6.18-rc3, v2.6.18-rc2, v2.6.18-rc1 |
|
#
98317f12 |
| 23-Jun-2006 |
Roman Zippel <zippel@linux-m68k.org> |
[PATCH] m68k: Remove some unused definitions in zorro.h
These definitions have long been superseded by asm-offsets.h
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton
[PATCH] m68k: Remove some unused definitions in zorro.h
These definitions have long been superseded by asm-offsets.h
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
show more ...
|
Revision tags: v2.6.17, v2.6.17-rc6, v2.6.17-rc5, v2.6.17-rc4, v2.6.17-rc3, v2.6.17-rc2, v2.6.17-rc1 |
|
#
33d8675e |
| 25-Mar-2006 |
Bjorn Helgaas <bjorn.helgaas@hp.com> |
[PATCH] amiga: fix driver_register() return handling, remove zorro_module_init()
Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns
[PATCH] amiga: fix driver_register() return handling, remove zorro_module_init()
Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value.
zorro_module_init() used the device count to automatically unregister and unload drivers that found no devices. That might have worked at one time, but has been broken for some time because zorro_register_driver() returned either a negative error or a positive count (never zero). So it could only unregister on failure, when it's not needed anyway.
This functionality could be resurrected in individual drivers by counting devices in their .probe() methods.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
show more ...
|
Revision tags: v2.6.16, v2.6.16-rc6, v2.6.16-rc5, v2.6.16-rc4, v2.6.16-rc3, v2.6.16-rc2, v2.6.16-rc1, v2.6.15, v2.6.15-rc7, v2.6.15-rc6, v2.6.15-rc5, v2.6.15-rc4, v2.6.15-rc3, v2.6.15-rc2, v2.6.15-rc1, v2.6.14, v2.6.14-rc5, v2.6.14-rc4, v2.6.14-rc3, v2.6.14-rc2, v2.6.14-rc1, v2.6.13, v2.6.13-rc7, v2.6.13-rc6, v2.6.13-rc5, v2.6.13-rc4, v2.6.13-rc3, v2.6.13-rc2, v2.6.13-rc1, v2.6.12, v2.6.12-rc6, v2.6.12-rc5, v2.6.12-rc4, v2.6.12-rc3, v2.6.12-rc2 |
|
#
1da177e4 |
| 16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it.
Let it rip!
show more ...
|
Revision tags: v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12 |
|
#
7332bc4d |
| 12-Jan-2020 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro: Move zorro_bus_type to bus-private header file zorro_bus_type was never used outside the Zorro bus code. Hence move it from the public to the bus-private header file. Si
zorro: Move zorro_bus_type to bus-private header file zorro_bus_type was never used outside the Zorro bus code. Hence move it from the public to the bus-private header file. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200112164949.20196-6-geert@linux-m68k.org
show more ...
|
#
1c5b915a |
| 12-Jan-2020 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro: Remove unused zorro_dev_driver() This function was never used. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200112164949.201
zorro: Remove unused zorro_dev_driver() This function was never used. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200112164949.20196-5-geert@linux-m68k.org
show more ...
|
#
0cfb07c5 |
| 12-Jan-2020 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro: Make zorro_match_device() static Unlike its PCI counterpart, zorro_match_device() was never used outside the Zorro bus code. Signed-off-by: Geert Uytterhoeven <geert@linu
zorro: Make zorro_match_device() static Unlike its PCI counterpart, zorro_match_device() was never used outside the Zorro bus code. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200112164949.20196-2-geert@linux-m68k.org
show more ...
|
Revision tags: v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4 |
|
#
986ea58d |
| 03-Oct-2013 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro/UAPI: Disintegrate include/linux/zorro*.h The Zorro definitions and device IDs are used by bootstraps, hence they should be exported through UAPI. Unfortunately zorro.h wa
zorro/UAPI: Disintegrate include/linux/zorro*.h The Zorro definitions and device IDs are used by bootstraps, hence they should be exported through UAPI. Unfortunately zorro.h was never marked for export when headers_install was introduced, so it was forgotten during the big UAPI disintegration. In addition, the removal of zorro_ids.h had been sneaked into commit 7e7a43c32a8970ea2bfc3d1af353dcb1a9237769 ("PCI: don't export device IDs to userspace") before, so it was also forgotten. Split off and export the Zorro definitions used by bootstraps. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
show more ...
|
Revision tags: v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10 |
|
#
c293738e |
| 29-Jun-2013 |
Geert Uytterhoeven <geert@linux-m68k.org> |
zorro: Do not allocate zorro_autocon[] statically Currently the array of Zorro devices is allocated statically, wasting up to 4.5 KiB when running an Amiga or multi-platform kernel on a
zorro: Do not allocate zorro_autocon[] statically Currently the array of Zorro devices is allocated statically, wasting up to 4.5 KiB when running an Amiga or multi-platform kernel on a machine with no or a handful of Zorro expansion cards. Convert it to conditional dynamic memory allocation to fix this. amiga_parse_bootinfo() still needs to store some information about the detected Zorro devices, at a time even the bootmem allocator is not yet available. This is now handled using a much smaller array (typically less than 0.5 KiB), which is __initdata and thus freed later. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
show more ...
|
Revision tags: v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3 |
|
#
28f65c11 |
| 09-Jun-2011 |
Joe Perches <joe@perches.com> |
treewide: Convert uses of struct resource to resource_size(ptr) Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *pt
treewide: Convert uses of struct resource to resource_size(ptr) Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
show more ...
|
Revision tags: v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1 |
|
#
0d305464 |
| 05-Apr-2009 |
Geert Uytterhoeven <geert@linux-m68k.org> |
m68k: amiga - Zorro host bridge platform device conversion Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
Revision tags: v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6 |
|
#
bf54a2b3 |
| 18-Nov-2008 |
Geert Uytterhoeven <geert@linux-m68k.org> |
m68k: amiga - Zorro bus modalias support Add Amiga Zorro bus modalias and uevent support Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
Revision tags: v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2, v2.6.27-rc1, v2.6.26, v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3, v2.6.26-rc2, v2.6.26-rc1, v2.6.25, v2.6.25-rc9, v2.6.25-rc8, v2.6.25-rc7, v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3, v2.6.25-rc2, v2.6.25-rc1, v2.6.24, v2.6.24-rc8, v2.6.24-rc7, v2.6.24-rc6, v2.6.24-rc5, v2.6.24-rc4, v2.6.24-rc3, v2.6.24-rc2, v2.6.24-rc1, v2.6.23, v2.6.23-rc9, v2.6.23-rc8, v2.6.23-rc7, v2.6.23-rc6, v2.6.23-rc5, v2.6.23-rc4, v2.6.23-rc3, v2.6.23-rc2, v2.6.23-rc1, v2.6.22, v2.6.22-rc7, v2.6.22-rc6, v2.6.22-rc5, v2.6.22-rc4, v2.6.22-rc3, v2.6.22-rc2, v2.6.22-rc1, v2.6.21, v2.6.21-rc7, v2.6.21-rc6, v2.6.21-rc5, v2.6.21-rc4, v2.6.21-rc3, v2.6.21-rc2, v2.6.21-rc1, v2.6.20, v2.6.20-rc7, v2.6.20-rc6, v2.6.20-rc5, v2.6.20-rc4, v2.6.20-rc3, v2.6.20-rc2, v2.6.20-rc1, v2.6.19, v2.6.19-rc6, v2.6.19-rc5, v2.6.19-rc4, v2.6.19-rc3, v2.6.19-rc2, v2.6.19-rc1, v2.6.18, v2.6.18-rc7, v2.6.18-rc6, v2.6.18-rc5, v2.6.18-rc4, v2.6.18-rc3, v2.6.18-rc2, v2.6.18-rc1 |
|
#
98317f12 |
| 23-Jun-2006 |
Roman Zippel <zippel@linux-m68k.org> |
[PATCH] m68k: Remove some unused definitions in zorro.h These definitions have long been superseded by asm-offsets.h Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-o
[PATCH] m68k: Remove some unused definitions in zorro.h These definitions have long been superseded by asm-offsets.h Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
show more ...
|
Revision tags: v2.6.17, v2.6.17-rc6, v2.6.17-rc5, v2.6.17-rc4, v2.6.17-rc3, v2.6.17-rc2, v2.6.17-rc1 |
|
#
33d8675e |
| 25-Mar-2006 |
Bjorn Helgaas <bjorn.helgaas@hp.com> |
[PATCH] amiga: fix driver_register() return handling, remove zorro_module_init() Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact,
[PATCH] amiga: fix driver_register() return handling, remove zorro_module_init() Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value. zorro_module_init() used the device count to automatically unregister and unload drivers that found no devices. That might have worked at one time, but has been broken for some time because zorro_register_driver() returned either a negative error or a positive count (never zero). So it could only unregister on failure, when it's not needed anyway. This functionality could be resurrected in individual drivers by counting devices in their .probe() methods. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
show more ...
|
Revision tags: v2.6.16, v2.6.16-rc6, v2.6.16-rc5, v2.6.16-rc4, v2.6.16-rc3, v2.6.16-rc2, v2.6.16-rc1, v2.6.15, v2.6.15-rc7, v2.6.15-rc6, v2.6.15-rc5, v2.6.15-rc4, v2.6.15-rc3, v2.6.15-rc2, v2.6.15-rc1, v2.6.14, v2.6.14-rc5, v2.6.14-rc4, v2.6.14-rc3, v2.6.14-rc2, v2.6.14-rc1, v2.6.13, v2.6.13-rc7, v2.6.13-rc6, v2.6.13-rc5, v2.6.13-rc4, v2.6.13-rc3, v2.6.13-rc2, v2.6.13-rc1, v2.6.12, v2.6.12-rc6, v2.6.12-rc5, v2.6.12-rc4, v2.6.12-rc3, v2.6.12-rc2 |
|
#
1da177e4 |
| 16-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
show more ...
|