mm/memory_hotplug: embed vmem_altmap details in memory block

With memmap on memory, some architecture needs more details w.r.t altmap
such as base_pfn, end_pfn, etc to unmap vmemmap memory. Instead

mm/memory_hotplug: embed vmem_altmap details in memory block

With memmap on memory, some architecture needs more details w.r.t altmap
such as base_pfn, end_pfn, etc to unmap vmemmap memory. Instead of
computing them again when we remove a memory block, embed vmem_altmap
details in struct memory_block if we are using memmap on memory block
feature.

[yangyingliang@huawei.com: fix error return code in add_memory_resource()]
Link: https://lkml.kernel.org/r/20230809081552.1351184-1-yangyingliang@huawei.com
Link: https://lkml.kernel.org/r/20230808091501.287660-7-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm/hwpoison: introduce per-memory_block hwpoison counter

Currently PageHWPoison flag does not behave well when experiencing memory
hotremove/hotplug. Any data field in struct page is unreliable whe

mm/hwpoison: introduce per-memory_block hwpoison counter

Currently PageHWPoison flag does not behave well when experiencing memory
hotremove/hotplug. Any data field in struct page is unreliable when the
associated memory is offlined, and the current mechanism can't tell
whether a memory block is onlined because a new memory devices is
installed or because previous failed offline operations are undone.
Especially if there's a hwpoisoned memory, it's unclear what the best
option is.

So introduce a new mechanism to make struct memory_block remember that a
memory block has hwpoisoned memory inside it. And make any online event
fail if the onlining memory block contains hwpoison. struct memory_block
is freed and reallocated over ACPI-based hotremove/hotplug, but not over
sysfs-based hotremove/hotplug. So the new counter can distinguish these
cases.

Link: https://lkml.kernel.org/r/20221024062012.1520887-5-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

memory: move hotplug memory notifier priority to same file for easy sorting

The priority of hotplug memory callback is defined in a different file.
And there are some callers using numbers directly

memory: move hotplug memory notifier priority to same file for easy sorting

The priority of hotplug memory callback is defined in a different file.
And there are some callers using numbers directly. Collect them together
into include/linux/memory.h for easy reading. This allows us to sort
their priorities more intuitively without additional comments.

Link: https://lkml.kernel.org/r/20220923033347.3935160-9-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

memory: remove unused register_hotmemory_notifier()

Remove unused register_hotmemory_notifier().

Link: https://lkml.kernel.org/r/20220923033347.3935160-8-liushixin2@huawei.com
Signed-off-by: Liu Sh

memory: remove unused register_hotmemory_notifier()

Remove unused register_hotmemory_notifier().

Link: https://lkml.kernel.org/r/20220923033347.3935160-8-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Waiman Long <longman@redhat.com>
Cc: zefan li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

drivers/base/memory: determine and store zone for single-zone memory blocks

test_pages_in_a_zone() is just another nasty PFN walker that can easily
stumble over ZONE_DEVICE memory ranges falling int

drivers/base/memory: determine and store zone for single-zone memory blocks

test_pages_in_a_zone() is just another nasty PFN walker that can easily
stumble over ZONE_DEVICE memory ranges falling into the same memory block
as ordinary system RAM: the memmap of parts of these ranges might possibly
be uninitialized. In fact, we observed (on an older kernel) with UBSAN:

UBSAN: Undefined behaviour in ./include/linux/mm.h:1133:50
index 7 is out of range for type 'zone [5]'
CPU: 121 PID: 35603 Comm: read_all Kdump: loaded Tainted: [...]
Hardware name: Dell Inc. PowerEdge R7425/08V001, BIOS 1.12.2 11/15/2019
Call Trace:
dump_stack+0x9a/0xf0
ubsan_epilogue+0x9/0x7a
__ubsan_handle_out_of_bounds+0x13a/0x181
test_pages_in_a_zone+0x3c4/0x500
show_valid_zones+0x1fa/0x380
dev_attr_show+0x43/0xb0
sysfs_kf_seq_show+0x1c5/0x440
seq_read+0x49d/0x1190
vfs_read+0xff/0x300
ksys_read+0xb8/0x170
do_syscall_64+0xa5/0x4b0
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
RIP: 0033:0x7f01f4439b52

We seem to stumble over a memmap that contains a garbage zone id. While
we could try inserting pfn_to_online_page() calls, it will just make
memory offlining slower, because we use test_pages_in_a_zone() to make
sure we're offlining pages that all belong to the same zone.

Let's just get rid of this PFN walker and determine the single zone of a
memory block -- if any -- for early memory blocks during boot. For memory
onlining, we know the single zone already. Let's avoid any additional
memmap scanning and just rely on the zone information available during
boot.

For memory hot(un)plug, we only really care about memory blocks that:
* span a single zone (and, thereby, a single node)
* are completely System RAM (IOW, no holes, no ZONE_DEVICE)
If one of these conditions is not met, we reject memory offlining.
Hotplugged memory blocks (starting out offline), always meet both
conditions.

There are three scenarios to handle:

(1) Memory hot(un)plug

A memory block with zone == NULL cannot be offlined, corresponding to
our previous test_pages_in_a_zone() check.

After successful memory onlining/offlining, we simply set the zone
accordingly.
* Memory onlining: set the zone we just used for onlining
* Memory offlining: set zone = NULL

So a hotplugged memory block starts with zone = NULL. Once memory
onlining is done, we set the proper zone.

(2) Boot memory with !CONFIG_NUMA

We know that there is just a single pgdat, so we simply scan all zones
of that pgdat for an intersection with our memory block PFN range when
adding the memory block. If more than one zone intersects (e.g., DMA and
DMA32 on x86 for the first memory block) we set zone = NULL and
consequently mimic what test_pages_in_a_zone() used to do.

(3) Boot memory with CONFIG_NUMA

At the point in time we create the memory block devices during boot, we
don't know yet which nodes *actually* span a memory block. While we could
scan all zones of all nodes for intersections, overlapping nodes complicate
the situation and scanning all nodes is possibly expensive. But that
problem has already been solved by the code that sets the node of a memory
block and creates the link in the sysfs --
do_register_memory_block_under_node().

So, we hook into the code that sets the node id for a memory block. If
we already have a different node id set for the memory block, we know
that multiple nodes *actually* have PFNs falling into our memory block:
we set zone = NULL and consequently mimic what test_pages_in_a_zone() used
to do. If there is no node id set, we do the same as (2) for the given
node.

Note that the call order in driver_init() is:
-> memory_dev_init(): create memory block devices
-> node_dev_init(): link memory block devices to the node and set the
node id

So in summary, we detect if there is a single zone responsible for this
memory block and we consequently store the zone in that case in the
memory block, updating it during memory onlining/offlining.

Link: https://lkml.kernel.org/r/20220210184359.235565-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Rafael Parra <rparrazo@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rafael Parra <rparrazo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm/memory_hotplug: remove HIGHMEM leftovers

We don't support CONFIG_MEMORY_HOTPLUG on 32 bit and consequently not
HIGHMEM. Let's remove any leftover code -- including the unused
"status_change_nid_

mm/memory_hotplug: remove HIGHMEM leftovers

We don't support CONFIG_MEMORY_HOTPLUG on 32 bit and consequently not
HIGHMEM. Let's remove any leftover code -- including the unused
"status_change_nid_high" field part of the memory notifier.

Link: https://lkml.kernel.org/r/20210929143600.49379-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm/memory_hotplug: remove CONFIG_MEMORY_HOTPLUG_SPARSE

CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for
CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use
CO

mm/memory_hotplug: remove CONFIG_MEMORY_HOTPLUG_SPARSE

CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for
CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use
CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE.

Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

memory: remove unused CONFIG_MEM_BLOCK_SIZE

Commit 3947be1969a9 ("[PATCH] memory hotplug: sysfs and add/remove
functions") defines CONFIG_MEM_BLOCK_SIZE, but this has never been
utilized anywhere.

memory: remove unused CONFIG_MEM_BLOCK_SIZE

Commit 3947be1969a9 ("[PATCH] memory hotplug: sysfs and add/remove
functions") defines CONFIG_MEM_BLOCK_SIZE, but this has never been
utilized anywhere.

It is a good practice to keep the CONFIG_* defines exclusively for the
Kbuild system. So, drop this unused definition.

This issue was noticed due to running ./scripts/checkkconfigsymbols.py.

Link: https://lkml.kernel.org/r/20211006120354.7468-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm/migrate: add CPU hotplug to demotion #ifdef

Once upon a time, the node demotion updates were driven solely by memory
hotplug events. But now, there are handlers for both CPU and memory
hotplug.

mm/migrate: add CPU hotplug to demotion #ifdef

Once upon a time, the node demotion updates were driven solely by memory
hotplug events. But now, there are handlers for both CPU and memory
hotplug.

However, the #ifdef around the code checks only memory hotplug. A
system that has HOTPLUG_CPU=y but MEMORY_HOTPLUG=n would miss CPU
hotplug events.

Update the #ifdef around the common code. Add memory and CPU-specific
#ifdefs for their handlers. These memory/CPU #ifdefs avoid unused
function warnings when their Kconfig option is off.

[arnd@arndb.de: rework hotplug_memory_notifier() stub]
Link: https://lkml.kernel.org/r/20211013144029.2154629-1-arnd@kernel.org

Link: https://lkml.kernel.org/r/20210924161255.E5FE8F7E@davehans-spike.ostc.intel.com
Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm/memory_hotplug: improved dynamic memory group aware "auto-movable" online policy

Currently, the "auto-movable" online policy does not allow for hotplugged
KERNEL (ZONE_NORMAL) memory to increase

mm/memory_hotplug: improved dynamic memory group aware "auto-movable" online policy

Currently, the "auto-movable" online policy does not allow for hotplugged
KERNEL (ZONE_NORMAL) memory to increase the amount of MOVABLE memory we
can have, primarily, because there is no coordiantion across memory
devices and we don't want to create zone-imbalances accidentially when
unplugging memory.

However, within a single memory device it's different. Let's allow for
KERNEL memory within a dynamic memory group to allow for more MOVABLE
within the same memory group. The only thing we have to take care of is
that the managing driver avoids zone imbalances by unplugging MOVABLE
memory first, otherwise there can be corner cases where unplug of memory
could result in (accidential) zone imbalances.

virtio-mem is the only user of dynamic memory groups and recently added
support for prioritizing unplug of ZONE_MOVABLE over ZONE_NORMAL, so we
don't need a new toggle to enable it for dynamic memory groups.

We limit this handling to dynamic memory groups, because:

* We want to keep the runtime overhead for collecting stats when
onlining a single memory block small. We tend to have only a handful of
dynamic memory groups, but we can have quite some static memory groups
(e.g., 256 DIMMs).

* It doesn't make too much sense for static memory groups, as we try
onlining all applicable memory blocks either completely to ZONE_MOVABLE
or not. In ordinary operation, we won't have a mixture of zones within
a static memory group.

When adding memory to a dynamic memory group, we'll first online memory to
ZONE_MOVABLE as long as early KERNEL memory allows for it. Then, we'll
online the next unit(s) to ZONE_NORMAL, until we can online the next
unit(s) to ZONE_MOVABLE.

For a simple virtio-mem device with a MOVABLE:KERNEL ratio of 3:1, it will
result in a layout like:

[M][M][M][M][M][M][M][M][N][M][M][M][N][M][M][M]...
^ movable memory due to early kernel memory
^ allows for more movable memory ...
^-----^ ... here
^ allows for more movable memory ...
^-----^ ... here

While the created layout is sub-optimal when it comes to contiguous zones,
it gives us the maximum flexibility when dynamically growing/shrinking a
device; we can grow small VMs really big in small steps, and still shrink
reliably to e.g., 1/4 of the maximum VM size in this example, removing
full memory blocks along with meta data more reliably.

Mark dynamic memory groups in the xarray such that we can efficiently
iterate over them when collecting stats. In usual setups, we have one
virtio-mem device per NUMA node, and usually only a small number of NUMA
nodes.

Note: for now, there seems to be no compelling reason to make this
behavior configurable.

Link: https://lkml.kernel.org/r/20210806124715.17090-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm/memory_hotplug: track present pages in memory groups

Let's track all present pages in each memory group. Especially, track
memory present in ZONE_MOVABLE and memory present in one of the kernel

mm/memory_hotplug: track present pages in memory groups

Let's track all present pages in each memory group. Especially, track
memory present in ZONE_MOVABLE and memory present in one of the kernel
zones (which really only is ZONE_NORMAL right now as memory groups only
apply to hotplugged memory) separately within a memory group, to prepare
for making smart auto-online decision for individual memory blocks within
a memory group based on group statistics.

Link: https://lkml.kernel.org/r/20210806124715.17090-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

drivers/base/memory: introduce "memory groups" to logically group memory blocks

In our "auto-movable" memory onlining policy, we want to make decisions
across memory blocks of a single memory device

drivers/base/memory: introduce "memory groups" to logically group memory blocks

In our "auto-movable" memory onlining policy, we want to make decisions
across memory blocks of a single memory device. Examples of memory
devices include ACPI memory devices (in the simplest case a single DIMM)
and virtio-mem. For now, we don't have a connection between a single
memory block device and the real memory device. Each memory device
consists of 1..X memory block devices.

Let's logically group memory blocks belonging to the same memory device in
"memory groups". Memory groups can span multiple physical ranges and a
memory group itself does not contain any information regarding physical
ranges, only properties (e.g., "max_pages") necessary for improved memory
onlining.

Introduce two memory group types:

1) Static memory group: E.g., a single ACPI memory device, consisting
of 1..X memory resources. A memory group consists of 1..Y memory
blocks. The whole group is added/removed in one go. If any part
cannot get offlined, the whole group cannot be removed.

2) Dynamic memory group: E.g., a single virtio-mem device. Memory is
dynamically added/removed in a fixed granularity, called a "unit",
consisting of 1..X memory blocks. A unit is added/removed in one go.
If any part of a unit cannot get offlined, the whole unit cannot be
removed.

In case of 1) we usually want either all memory managed by ZONE_MOVABLE or
none. In case of 2) we usually want to have as many units as possible
managed by ZONE_MOVABLE. We want a single unit to be of the same type.

For now, memory groups are an internal concept that is not exposed to user
space; we might want to change that in the future, though.

add_memory() users can specify a mgid instead of a nid when passing the
MHP_NID_IS_MGID flag.

Link: https://lkml.kernel.org/r/20210806124715.17090-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm: sparse: pass section_nr to find_memory_block

With CONFIG_SPARSEMEM_EXTREME enabled, __section_nr() which converts
mem_section to section_nr could be costly since it iterates all section
roots to

mm: sparse: pass section_nr to find_memory_block

With CONFIG_SPARSEMEM_EXTREME enabled, __section_nr() which converts
mem_section to section_nr could be costly since it iterates all section
roots to check if the given mem_section is in its range.

On the other hand, __nr_to_section() which converts section_nr to
mem_section can be done in O(1).

Let's pass section_nr instead of mem_section ptr to find_memory_block() in
order to reduce needless iterations.

Link: https://lkml.kernel.org/r/20210707150212.855-3-ohoono.kwon@samsung.com
Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm,memory_hotplug: allocate memmap from the added memory range

Physical memory hotadd has to allocate a memmap (struct page array) for
the newly added memory section. Currently, alloc_pages_node()

mm,memory_hotplug: allocate memmap from the added memory range

Physical memory hotadd has to allocate a memmap (struct page array) for
the newly added memory section. Currently, alloc_pages_node() is used
for those allocations.

This has some disadvantages:
a) an existing memory is consumed for that purpose
(eg: ~2MB per 128MB memory section on x86_64)
This can even lead to extreme cases where system goes OOM because
the physically hotplugged memory depletes the available memory before
it is onlined.
b) if the whole node is movable then we have off-node struct pages
which has performance drawbacks.
c) It might be there are no PMD_ALIGNED chunks so memmap array gets
populated with base pages.

This can be improved when CONFIG_SPARSEMEM_VMEMMAP is enabled.

Vmemap page tables can map arbitrary memory. That means that we can
reserve a part of the physically hotadded memory to back vmemmap page
tables. This implementation uses the beginning of the hotplugged memory
for that purpose.

There are some non-obviously things to consider though.

Vmemmap pages are allocated/freed during the memory hotplug events
(add_memory_resource(), try_remove_memory()) when the memory is
added/removed. This means that the reserved physical range is not
online although it is used. The most obvious side effect is that
pfn_to_online_page() returns NULL for those pfns. The current design
expects that this should be OK as the hotplugged memory is considered a
garbage until it is onlined. For example hibernation wouldn't save the
content of those vmmemmaps into the image so it wouldn't be restored on
resume but this should be OK as there no real content to recover anyway
while metadata is reachable from other data structures (e.g. vmemmap
page tables).

The reserved space is therefore (de)initialized during the {on,off}line
events (mhp_{de}init_memmap_on_memory). That is done by extracting page
allocator independent initialization from the regular onlining path.
The primary reason to handle the reserved space outside of
{on,off}line_pages is to make each initialization specific to the
purpose rather than special case them in a single function.

As per above, the functions that are introduced are:

- mhp_init_memmap_on_memory:
Initializes vmemmap pages by calling move_pfn_range_to_zone(), calls
kasan_add_zero_shadow(), and onlines as many sections as vmemmap pages
fully span.

- mhp_deinit_memmap_on_memory:
Offlines as many sections as vmemmap pages fully span, removes the
range from zhe zone by remove_pfn_range_from_zone(), and calls
kasan_remove_zero_shadow() for the range.

The new function memory_block_online() calls mhp_init_memmap_on_memory()
before doing the actual online_pages(). Should online_pages() fail, we
clean up by calling mhp_deinit_memmap_on_memory(). Adjusting of
present_pages is done at the end once we know that online_pages()
succedeed.

On offline, memory_block_offline() needs to unaccount vmemmap pages from
present_pages() before calling offline_pages(). This is necessary because
offline_pages() tears down some structures based on the fact whether the
node or the zone become empty. If offline_pages() fails, we account back
vmemmap pages. If it succeeds, we call mhp_deinit_memmap_on_memory().

Hot-remove:

We need to be careful when removing memory, as adding and
removing memory needs to be done with the same granularity.
To check that this assumption is not violated, we check the
memory range we want to remove and if a) any memory block has
vmemmap pages and b) the range spans more than a single memory
block, we scream out loud and refuse to proceed.

If all is good and the range was using memmap on memory (aka vmemmap pages),
we construct an altmap structure so free_hugepage_table does the right
thing and calls vmem_altmap_free instead of free_pagetable.

Link: https://lkml.kernel.org/r/20210421102701.25051-5-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

drivers/base/memory: don't store phys_device in memory blocks

No need to store the value for each and every memory block, as we can
easily query the value at runtime. Reshuffle the members to optim

drivers/base/memory: don't store phys_device in memory blocks

No need to store the value for each and every memory block, as we can
easily query the value at runtime. Reshuffle the members to optimize the
memory layout. Also, let's clarify what the interface once was used for
and why it's legacy nowadays.

"phys_device" was used on s390x in older versions of lsmem[2]/chmem[3],
back when they were still part of s390x-tools. They were later replaced
by the variants in linux-utils. For example, RHEL6 and RHEL7 contain
lsmem/chmem from s390-utils. RHEL8 switched to versions from util-linux
on s390x [4].

"phys_device" was added with sysfs support for memory hotplug in commit
3947be1969a9 ("[PATCH] memory hotplug: sysfs and add/remove functions") in
2005. It always returned 0.

s390x started returning something != 0 on some setups (if sclp.rzm is set
by HW) in 2010 via commit 57b552ba0b2f ("memory hotplug/s390: set
phys_device").

For s390x, it allowed for identifying which memory block devices belong to
the same storage increment (RZM). Only if all memory block devices
comprising a single storage increment were offline, the memory could
actually be removed in the hypervisor.

Since commit e5d709bb5fb7 ("s390/memory hotplug: provide
memory_block_size_bytes() function") in 2013 a memory block device spans
at least one storage increment - which is why the interface isn't really
helpful/used anymore (except by old lsmem/chmem tools).

There were once RFC patches to make use of "phys_device" in ACPI context;
however, the underlying problem could be solved using different interfaces
[1].

[1] https://patchwork.kernel.org/patch/2163871/
[2] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/lsmem
[3] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/chmem
[4] https://bugzilla.redhat.com/show_bug.cgi?id=1504134

Link: https://lkml.kernel.org/r/20210201181347.13262-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

drivers/base/memory: don't store phys_device in memory blocks

[ Upstream commit e9a2e48e8704c9d20a625c6f2357147d03ea7b97 ]

No need to store the value for each and every memory block, as we can
easi

drivers/base/memory: don't store phys_device in memory blocks

[ Upstream commit e9a2e48e8704c9d20a625c6f2357147d03ea7b97 ]

No need to store the value for each and every memory block, as we can
easily query the value at runtime. Reshuffle the members to optimize the
memory layout. Also, let's clarify what the interface once was used for
and why it's legacy nowadays.

"phys_device" was used on s390x in older versions of lsmem[2]/chmem[3],
back when they were still part of s390x-tools. They were later replaced
by the variants in linux-utils. For example, RHEL6 and RHEL7 contain
lsmem/chmem from s390-utils. RHEL8 switched to versions from util-linux
on s390x [4].

"phys_device" was added with sysfs support for memory hotplug in commit
3947be1969a9 ("[PATCH] memory hotplug: sysfs and add/remove functions") in
2005. It always returned 0.

s390x started returning something != 0 on some setups (if sclp.rzm is set
by HW) in 2010 via commit 57b552ba0b2f ("memory hotplug/s390: set
phys_device").

For s390x, it allowed for identifying which memory block devices belong to
the same storage increment (RZM). Only if all memory block devices
comprising a single storage increment were offline, the memory could
actually be removed in the hypervisor.

Since commit e5d709bb5fb7 ("s390/memory hotplug: provide
memory_block_size_bytes() function") in 2013 a memory block device spans
at least one storage increment - which is why the interface isn't really
helpful/used anymore (except by old lsmem/chmem tools).

There were once RFC patches to make use of "phys_device" in ACPI context;
however, the underlying problem could be solved using different interfaces
[1].

[1] https://patchwork.kernel.org/patch/2163871/
[2] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/lsmem
[3] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/chmem
[4] https://bugzilla.redhat.com/show_bug.cgi?id=1504134

Link: https://lkml.kernel.org/r/20210201181347.13262-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drivers/base/memory.c: drop section_count

Patch series "mm: drop superfluous section checks when onlining/offlining".

Let's drop some superfluous section checks on the onlining/offlining path.

Thi

drivers/base/memory.c: drop section_count

Patch series "mm: drop superfluous section checks when onlining/offlining".

Let's drop some superfluous section checks on the onlining/offlining path.

This patch (of 3):

Since commit c5e79ef561b0 ("mm/memory_hotplug.c: don't allow to
online/offline memory blocks with holes") we have a generic check in
offline_pages() that disallows offlining memory blocks with holes.

Memory blocks with missing sections are just another variant of these type
of blocks. We can stop checking (and especially storing) present
sections. A proper error message is now printed why offlining failed.

section_count was initially introduced in commit 07681215975e ("Driver
core: Add section count to memory_block struct") in order to detect when
it is okay to remove a memory block. It was used in commit 26bbe7ef6d5c
("drivers/base/memory.c: prohibit offlining of memory blocks with missing
sections") to disallow offlining memory blocks with missing sections. As
we refactored creation/removal of memory devices and have a proper check
for holes in place, we can drop the section_count.

This also removes a leftover comment regarding the mem_sysfs_mutex, which
was removed in commit 848e19ad3c33 ("drivers/base/memory.c: drop the
mem_sysfs_mutex").

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: http://lkml.kernel.org/r/20200127110424.5757-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

include/linux/memory.h: drop fields 'hw' and 'phys_callback' from struct memory_block

memory_block structure elements 'hw' and 'phys_callback' are not getting
used. This was originally added with c

include/linux/memory.h: drop fields 'hw' and 'phys_callback' from struct memory_block

memory_block structure elements 'hw' and 'phys_callback' are not getting
used. This was originally added with commit 3947be1969a9 ("[PATCH]
memory hotplug: sysfs and add/remove functions") but never seem to have
been used. Just drop them now.

Link: http://lkml.kernel.org/r/1576728650-13867-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm: remove the memory isolate notifier

Luckily, we have no users left, so we can get rid of it. Cleanup
set_migratetype_isolate() a little bit.

Link: http://lkml.kernel.org/r/20191114131911.11783-

mm: remove the memory isolate notifier

Luckily, we have no users left, so we can get rid of it. Cleanup
set_migratetype_isolate() a little bit.

Link: http://lkml.kernel.org/r/20191114131911.11783-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Qian Cai <cai@lca.pw>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm/memory_hotplug: fix try_offline_node()

try_offline_node() is pretty much broken right now:

- The node span is updated when onlining memory, not when adding it. We
ignore memory that was meve

mm/memory_hotplug: fix try_offline_node()

try_offline_node() is pretty much broken right now:

- The node span is updated when onlining memory, not when adding it. We
ignore memory that was mever onlined. Bad.

- We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily
trigger a kernel panic. Bad for memory that is offline but also bad
for subsection hotadd with ZONE_DEVICE, whereby the memmap of the
first PFN of a section might contain garbage.

- Sections belonging to mixed nodes are not properly considered.

As memory blocks might belong to multiple nodes, we would have to walk
all pageblocks (or at least subsections) within present sections.
However, we don't have a way to identify whether a memmap that is not
online was initialized (relevant for ZONE_DEVICE). This makes things
more complicated.

Luckily, we can piggy pack on the node span and the nid stored in memory
blocks. Currently, the node span is grown when calling
move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when
removing memory, before calling try_offline_node(). Sysfs links are
created via link_mem_sections(), e.g., during boot or when adding
memory.

If the node still spans memory or if any memory block belongs to the
nid, we don't set the node offline. As memory blocks that span multiple
nodes cannot get offlined, the nid stored in memory blocks is reliable
enough (for such online memory blocks, the node still spans the memory).

Introduce for_each_memory_block() to efficiently walk all memory blocks.

Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span
when removing ZONE_DEVICE memory to fix similar issues (access of
garbage memmaps) - until we have a reliable way to identify whether
these memmaps were properly initialized. This implies later, that once
a node had ZONE_DEVICE memory, we won't be able to set a node offline -
which should be acceptable.

Since commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") memory that is added is not
assoziated with a zone/node (memmap not initialized). The introducing
commit 60a5a19e7419 ("memory-hotplug: remove sysfs file of node")
already missed that we could have multiple nodes for a section and that
the zone/node span is updated when onlining pages, not when adding them.

I tested this by hotplugging two DIMMs to a memory-less and cpu-less
NUMA node. The node is properly onlined when adding the DIMMs. When
removing the DIMMs, the node is properly offlined.

Masayoshi Mizuma reported:

: Without this patch, memory hotplug fails as panic:
:
: BUG: kernel NULL pointer dereference, address: 0000000000000000
: ...
: Call Trace:
: remove_memory_block_devices+0x81/0xc0
: try_remove_memory+0xb4/0x130
: __remove_memory+0xa/0x20
: acpi_memory_device_remove+0x84/0x100
: acpi_bus_trim+0x57/0x90
: acpi_bus_trim+0x2e/0x90
: acpi_device_hotplug+0x2b2/0x4d0
: acpi_hotplug_work_fn+0x1a/0x30
: process_one_work+0x171/0x380
: worker_thread+0x49/0x3f0
: kthread+0xf8/0x130
: ret_from_fork+0x35/0x40

[david@redhat.com: v3]
Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com
Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com
Fixes: 60a5a19e7419 ("memory-hotplug: remove sysfs file of node")
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e86b319
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

drivers/base/memory.c: don't store end_section_nr in memory blocks

Each memory block spans the same amount of sections/pages/bytes. The size
is determined before the first memory block is created.

drivers/base/memory.c: don't store end_section_nr in memory blocks

Each memory block spans the same amount of sections/pages/bytes. The size
is determined before the first memory block is created. No need to store
what we can easily calculate - and the calculations even look simpler now.

Michal brought up the idea of variable-sized memory blocks. However, if
we ever implement something like this, we will need an API compatibility
switch and reworks at various places (most code assumes a fixed memory
block size). So let's cleanup what we have right now.

While at it, fix the variable naming in register_mem_sect_under_node() -
we no longer talk about a single section.

Link: http://lkml.kernel.org/r/20190809110200.2746-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

driver/base/memory.c: validate memory block size early

Let's validate the memory block size early, when initializing the memory
device infrastructure. Fail hard in case the value is not suitable.

driver/base/memory.c: validate memory block size early

Let's validate the memory block size early, when initializing the memory
device infrastructure. Fail hard in case the value is not suitable.

As nobody checks the return value of memory_dev_init(), turn it into a
void function and fail with a panic in all scenarios instead. Otherwise,
we'll crash later during boot when core/drivers expect that the memory
device infrastructure (including memory_block_size_bytes()) works as
expected.

I think long term, we should move the whole memory block size
configuration (set_memory_block_size_order() and
memory_block_size_bytes()) into drivers/base/memory.c.

Link: http://lkml.kernel.org/r/20190806090142.22709-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

drivers/base/memory.c: get rid of find_memory_block_hinted()

No longer needed, let's remove it. Also, drop the "hint" parameter
completely from "find_memory_block_by_id", as nobody needs it anymore

drivers/base/memory.c: get rid of find_memory_block_hinted()

No longer needed, let's remove it. Also, drop the "hint" parameter
completely from "find_memory_block_by_id", as nobody needs it anymore.

[david@redhat.com: v3]
Link: http://lkml.kernel.org/r/20190620183139.4352-7-david@redhat.com
[david@redhat.com: handle zero-length walks]
Link: http://lkml.kernel.org/r/1c2edc22-afd7-2211-c4c7-40e54e5007e8@redhat.com
Link: http://lkml.kernel.org/r/20190614100114.311-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Qian Cai <cai@lca.pw>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm/memory_hotplug: move and simplify walk_memory_blocks()

Let's move walk_memory_blocks() to the place where memory block logic
resides and simplify it. While at it, add a type for the callback
fun

mm/memory_hotplug: move and simplify walk_memory_blocks()

Let's move walk_memory_blocks() to the place where memory block logic
resides and simplify it. While at it, add a type for the callback
function.

Link: http://lkml.kernel.org/r/20190614100114.311-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mm/memory_hotplug: remove memory block devices before arch_remove_memory()

Let's factor out removing of memory block devices, which is only
necessary for memory added via add_memory() and friends th

mm/memory_hotplug: remove memory block devices before arch_remove_memory()

Let's factor out removing of memory block devices, which is only
necessary for memory added via add_memory() and friends that created
memory block devices. Remove the devices before calling
arch_remove_memory().

This finishes factoring out memory block device handling from
arch_add_memory() and arch_remove_memory().

Link: http://lkml.kernel.org/r/20190527111152.16324-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "mike.travis@hpe.com" <mike.travis@hpe.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...