hwmon: (core) Add missing beep-related standard attributes

beep_enable, inX_beep, currX_beep, fanX_beep, and tempX_beep
are standard attributes mentioned in the sysfs interface
specification but not

hwmon: (core) Add missing beep-related standard attributes

beep_enable, inX_beep, currX_beep, fanX_beep, and tempX_beep
are standard attributes mentioned in the sysfs interface
specification but not implemented in the hwmon core. Since
these are not deprecated, implement them.

Adding beep_mask is not necessary, as it is deprecated and
the drivers already using it are manually defining it.

Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230507152216.1862653-1-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: constify pointers to hwmon_channel_info

HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allow

hwmon: constify pointers to hwmon_channel_info

HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allows drivers to make them also const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Deprecate [devm_]hwmon_device_register_with_groups

Even though the hardware monitoring documentation already stated that new
drivers should use [devm_]devm_hwmon_device_register_with_info() t

hwmon: Deprecate [devm_]hwmon_device_register_with_groups

Even though the hardware monitoring documentation already stated that new
drivers should use [devm_]devm_hwmon_device_register_with_info() to
register with the hardware monitoring subsystem, we still get submissions
for new drivers using the older APIs. There is no benefit to use those
APIs. On the contrary, using the older APIs results in substantially larger
code size. Explicitly deprecate [devm_]hwmon_device_register_with_groups()
to ensure that all new drivers use the latest API.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Introduce hwmon_device_register_for_thermal

The thermal subsystem registers a hwmon driver without providing
chip or sysfs group information. This is for legacy reasons and
would be difficult

hwmon: Introduce hwmon_device_register_for_thermal

The thermal subsystem registers a hwmon driver without providing
chip or sysfs group information. This is for legacy reasons and
would be difficult to change. At the same time, we want to enforce
that chip information is provided when registering a hwmon device
using hwmon_device_register_with_info(). To enable this, introduce
a special API for use only by the thermal subsystem.

Acked-by: Rafael J . Wysocki <rafael@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: introduce hwmon_sanitize_name()

More and more drivers will check for bad characters in the hwmon name
and all are using the same code snippet. Consolidate that code by adding
a new hwmon_sani

hwmon: introduce hwmon_sanitize_name()

More and more drivers will check for bad characters in the hwmon name
and all are using the same code snippet. Consolidate that code by adding
a new hwmon_sanitize_name() function.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220405092452.4033674-2-michael@walle.cc
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: (core) Add support for pwm auto channels attribute

pwm[1-*]_auto_channels_temp is documented as an official
hwmon sysfs attribute, yet there is no support for it in
the new with_info-API. Fix

hwmon: (core) Add support for pwm auto channels attribute

pwm[1-*]_auto_channels_temp is documented as an official
hwmon sysfs attribute, yet there is no support for it in
the new with_info-API. Fix that.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220224061210.16452-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: prefix kernel-doc comments for structs with struct

The command ./scripts/kernel-doc -none include/linux/hwmon.h warns:

include/linux/hwmon.h:406: warning: This comment starts with '/**', b

hwmon: prefix kernel-doc comments for structs with struct

The command ./scripts/kernel-doc -none include/linux/hwmon.h warns:

include/linux/hwmon.h:406: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Channel information
include/linux/hwmon.h:425: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Chip configuration

Address those kernel-doc warnings by prefixing kernel-doc descriptions for
structs with the keyword 'struct'.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211216154257.26758-1-lukas.bulwahn@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: (core) Add support for rated attributes

Adding implementation for new attributes (rated_min/rated_max) for
currentX, inX, powerX, tempX and humidityX.

Tested with OpenBMC stack and simple hw

hwmon: (core) Add support for rated attributes

Adding implementation for new attributes (rated_min/rated_max) for
currentX, inX, powerX, tempX and humidityX.

Tested with OpenBMC stack and simple hwmon driver using
rated_min/rated_max for the following types of sensors: hwmon_temp,
hwmon_in, hwmon_curr, hwmon_power, hwmon_humidity.
For each sensor rated attributes were available and returned
expected values.

Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com>
Link: https://lore.kernel.org/r/1596224237-32280-3-git-send-email-zbigniew.lukwinski@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Add notification support

For hwmon drivers using the hwmon_device_register_with_info() API, it
is desirable to have a generic notification mechanism available. This
mechanism can be used to n

hwmon: Add notification support

For hwmon drivers using the hwmon_device_register_with_info() API, it
is desirable to have a generic notification mechanism available. This
mechanism can be used to notify userspace as well as the thermal
subsystem if the driver experiences any events, such as warning or
critical alarms.

Implement hwmon_notify_event() to provide this mechanism. The function
generates a sysfs event and a udev event. If the device is registered
with the thermal subsystem and the event is associated with a temperature
sensor, also notify the thermal subsystem that a thermal event occurred.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Add support for enable attributes to hwmon core

The hwmon ABI supports enable attributes since commit fb41a710f84e
("hwmon: Document the sensor enable attribute"), but did not
add support for

hwmon: Add support for enable attributes to hwmon core

The hwmon ABI supports enable attributes since commit fb41a710f84e
("hwmon: Document the sensor enable attribute"), but did not
add support for those attributes to the hwmon core. Do that now.

Since the enable attributes are logically the most important attributes,
they are added as first attribute to the attribute list. Move
hwmon_in_enable from last to first place for consistency.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Add intrusion templates

Add templates for intrusion%d_alarm and intrusion%d_beep.
Note, these start at 0.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.

hwmon: Add intrusion templates

Add templates for intrusion%d_alarm and intrusion%d_beep.
Note, these start at 0.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20191124202030.45360-2-linux@treblig.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Fix HWMON_P_MIN_ALARM mask

Both HWMON_P_MIN_ALARM and HWMON_P_MAX_ALARM were using
BIT(hwmon_power_max_alarm).

Fixes: aa7f29b07c870 ("hwmon: Add support for power min, lcrit, min_alarm and l

hwmon: Fix HWMON_P_MIN_ALARM mask

Both HWMON_P_MIN_ALARM and HWMON_P_MAX_ALARM were using
BIT(hwmon_power_max_alarm).

Fixes: aa7f29b07c870 ("hwmon: Add support for power min, lcrit, min_alarm and lcrit_alarm")
CC: <stable@vger.kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20190924124945.491326-2-nuno.sa@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

hwmon: Add support for samples attributes

Add support for the new samples attributes to the hwmon core.

Cc: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>

hwmon: Add support for samples attributes

Add support for the new samples attributes to the hwmon core.

Cc: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Add convience macro to define simple static sensors

It takes a fair amount of boiler plate code to add new sensors, add a
macro that can be used to specify simple static sensors.

Signed-off-

hwmon: Add convience macro to define simple static sensors

It takes a fair amount of boiler plate code to add new sensors, add a
macro that can be used to specify simple static sensors.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: (core) Add hwmon_in_enable attribute

According to hwmon ABI, in%d_enable is a sysfs interface that
allows user space to enable and disable the input sensor. So
this patch just simply adds the

hwmon: (core) Add hwmon_in_enable attribute

According to hwmon ABI, in%d_enable is a sysfs interface that
allows user space to enable and disable the input sensor. So
this patch just simply adds the attribute to the list.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Add helper to tell if a char is invalid in a name

HWMON device names are not allowed to contain "-* \t\n". Add a helper
which will return true if passed an invalid character. It can be used
t

hwmon: Add helper to tell if a char is invalid in a name

HWMON device names are not allowed to contain "-* \t\n". Add a helper
which will return true if passed an invalid character. It can be used
to massage a string into a hwmon compatible name by replacing invalid
characters with '_'.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

hwmon: Add support for power min, lcrit, min_alarm and lcrit_alarm

Some sensors support reporting minimal and lower critical power, as
well as alarms when these thresholds are reached. Add support f

hwmon: Add support for power min, lcrit, min_alarm and lcrit_alarm

Some sensors support reporting minimal and lower critical power, as
well as alarms when these thresholds are reached. Add support for
these attributes to the hwmon core.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

hwmon: Add missing HWMON_T_LCRIT_ALARM define

The enum hwmon_temp_lcrit_alarm exists, but the BIT definition is
missing.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Guenter Roeck <linux@r

hwmon: Add missing HWMON_T_LCRIT_ALARM define

The enum hwmon_temp_lcrit_alarm exists, but the BIT definition is
missing.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

hwmon: (core) Add hwmon_max to hwmon_sensor_types enumeration

It's useful to know the maximum types of sensor supported by hwmon
framework. It can be used to allocate some data structures when sorti

hwmon: (core) Add hwmon_max to hwmon_sensor_types enumeration

It's useful to know the maximum types of sensor supported by hwmon
framework. It can be used to allocate some data structures when sorting
the monitors based on their type.

This will be used by scmi hwmon support.

Cc: linux-hwmon@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

show more ...

hwmon: Constify str parameter of hwmon_ops->read_string

The read_string callback is supposed to retrieve a pointer to a
constant string.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by:

hwmon: Constify str parameter of hwmon_ops->read_string

The read_string callback is supposed to retrieve a pointer to a
constant string.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: Add missing HWMON_T_ALARM

Unfortunately the HWMON_T_ALARM define was missing,
although the associated entry was present in hwmon_temp_attributes.
This is needed to convert drivers to the new

hwmon: Add missing HWMON_T_ALARM

Unfortunately the HWMON_T_ALARM define was missing,
although the associated entry was present in hwmon_temp_attributes.
This is needed to convert drivers to the new interface which use channel
based alarms.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: (core) Rename groups parameter in API to extra_groups

The 'groups' parameter of hwmon_device_register_with_info() and
devm_hwmon_device_register_with_info() is only necessary if extra
non-sta

hwmon: (core) Rename groups parameter in API to extra_groups

The 'groups' parameter of hwmon_device_register_with_info() and
devm_hwmon_device_register_with_info() is only necessary if extra
non-standard attributes need to be provided. Rename the parameter
to extra_groups and clarify the documentation.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: (core) Deprecate hwmon_device_register()

Inform the user that hwmon_device_register() is deprecated,
and suggest conversion to the newest API. Also remove
hwmon_device_register() from the ker

hwmon: (core) Deprecate hwmon_device_register()

Inform the user that hwmon_device_register() is deprecated,
and suggest conversion to the newest API. Also remove
hwmon_device_register() from the kernel API documentation.

Note that hwmon_device_register() is not marked as __deprecated()
since doing so might result in build errors.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...

hwmon: (core) Add support for string attributes to new API

The new API is so far only suited for data attributes and does not work
well for string attributes, specifically for the 'label' attributes

hwmon: (core) Add support for string attributes to new API

The new API is so far only suited for data attributes and does not work
well for string attributes, specifically for the 'label' attributes.
Provide a separate callback function for those.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...