drm/crtc-helper: Remove most include statements from drm_crtc_helper.h

Remove most include statements from crm_crtc_helper.h and forward-
declare the contained types in drm_crtc_helper.h. Only keep

drm/crtc-helper: Remove most include statements from drm_crtc_helper.h

Remove most include statements from crm_crtc_helper.h and forward-
declare the contained types in drm_crtc_helper.h. Only keep <linux/types.h>
for the definition of 'bool'.

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-23-tzimmermann@suse.de

show more ...

drm: Don't include <linux/fb.h> in drm_crtc_helper.h

Including <linux/fb.h> in drm_crtc_helper.h is not required. Remove
the include statement and avoid rebuilding DRM whenever the fbdev
header chan

drm: Don't include <linux/fb.h> in drm_crtc_helper.h

Including <linux/fb.h> in drm_crtc_helper.h is not required. Remove
the include statement and avoid rebuilding DRM whenever the fbdev
header changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-4-tzimmermann@suse.de

show more ...

drm/crtc-helper: Add a drm_crtc_helper_atomic_check() helper

Provides a default CRTC state check handler for CRTCs that only have one
primary plane attached.

There are some drivers that duplicate t

drm/crtc-helper: Add a drm_crtc_helper_atomic_check() helper

Provides a default CRTC state check handler for CRTCs that only have one
primary plane attached.

There are some drivers that duplicate this logic in their helpers, such as
simpledrm and ssd130x. Factor out this common code into a CRTC helper and
make drivers use it.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-5-javierm@redhat.com

show more ...

drm: Split out drm_probe_helper.h

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out

drm: Split out drm_probe_helper.h

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

show more ...

drm: Move the legacy kms disable_all helper to crtc helpers

It's not a core function, and the matching atomic functions are also
not in the core. Plus the suspend/resume helper is also already there

drm: Move the legacy kms disable_all helper to crtc helpers

It's not a core function, and the matching atomic functions are also
not in the core. Plus the suspend/resume helper is also already there.

Needs a tiny bit of open-coding, but less midlayer beats that I think.

v2: Rebase onto ast (which gained a new user).

Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-4-daniel.vetter@ffwll.ch

show more ...

drm: Remove transitional helpers

With armada the last bigger driver that realistically needed these to
convert from legacy kms to atomic is converted. These helpers have
been broken more often than

drm: Remove transitional helpers

With armada the last bigger driver that realistically needed these to
convert from legacy kms to atomic is converted. These helpers have
been broken more often than not the past 2 years, and as this little
patch series shows, tricked a bunch of people into using the wrong
helpers for their functions.

Aside: I think a lot more drivers should be using the device-level
drm_atomic_helper_shutdown/suspend/resume helpers and related
functions. In almost all the cases they get things exactly right.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-16-daniel.vetter@ffwll.ch

show more ...

drm: Allow determining if current task is output poll worker

Introduce a helper to determine if the current task is an output poll
worker.

This allows us to fix a long-standing deadlock in several

drm: Allow determining if current task is output poll worker

Introduce a helper to determine if the current task is an output poll
worker.

This allows us to fix a long-standing deadlock in several DRM drivers
wherein the ->runtime_suspend callback waits for the output poll worker
to finish and the worker in turn calls a ->detect callback which waits
for runtime suspend to finish. The ->detect callback is invoked from
multiple call sites and waiting for runtime suspend to finish is the
correct thing to do except if it's executing in the context of the
worker.

v2: Expand kerneldoc to specifically mention deadlock between
output poll worker and autosuspend worker as use case. (Lyude)

Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de

show more ...

drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.

mode_valid() called from drm_helper_probe_single_connector_modes()
may need to look at connector->state beca

drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.

mode_valid() called from drm_helper_probe_single_connector_modes()
may need to look at connector->state because what a valid mode is may
depend on connector properties being set. For example some HDMI modes
might be rejected when a connector property forces the connector
into DVI mode.

Some implementations of detect() already lock all state,
so we have to pass an acquire_ctx to them to prevent a deadlock.

This means changing the function signature of detect() slightly,
and passing the acquire_ctx for locking multiple crtc's.
For the callbacks, it will always be non-zero. To allow callers
not to worry about this, drm_helper_probe_detect_ctx is added
which might handle -EDEADLK for you.

Changes since v1:
- Always set ctx parameter.
Changes since v2:
- Always take connection_mutex when probing.
Changes since v3:
- Remove the ctx from intel_dp_long_pulse, and add
WARN_ON(!connection_mutex) (danvet)
- Update docs to clarify the locking situation. (danvet)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1491504920-4017-1-git-send-email-maarten.lankhorst@linux.intel.com

show more ...

drm: Add acquire ctx parameter to ->set_config

Surprisingly a lot of legacy drivers roll their own, for
runtime pm and because vmwgfx.

Also make nouveau's set_config static while at it.

Cc: Sincla

drm: Add acquire ctx parameter to ->set_config

Surprisingly a lot of legacy drivers roll their own, for
runtime pm and because vmwgfx.

Also make nouveau's set_config static while at it.

Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch

show more ...

drm: drop extern from function decls

It's the default storage class for functions, entirely redundant. And
a lot of these headers are a bit inconsistent due to organically
grown.

Reviewed-by: Gabri

drm: drop extern from function decls

It's the default storage class for functions, entirely redundant. And
a lot of these headers are a bit inconsistent due to organically
grown.

Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-2-daniel.vetter@ffwll.ch

show more ...

Reinstate "drm/probe-helpers: Drop locking from poll_enable""

This reverts commit 54a07c7bb0da0343734c78212bbe9f3735394962,
and reinstates the original.

[airlied: this might be a bad plan for git].

Reinstate "drm/probe-helpers: Drop locking from poll_enable""

This reverts commit 54a07c7bb0da0343734c78212bbe9f3735394962,
and reinstates the original.

[airlied: this might be a bad plan for git].

commit 3846fd9b86001bea171943cc3bb9222cb6da6b42
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jan 11 10:01:17 2017 +0100

drm/probe-helpers: Drop locking from poll_enable

It was only needed to protect the connector_list walking, see

commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:26 2015 +0200

drm/probe-helper: Grab mode_config.mutex in poll_init/enable

Unfortunately the commit message of that patch fails to mention that
the new locking check was for the connector_list.

But that requirement disappeared in

commit c36a3254f7857f1ad9badbe3578ccc92be541a8e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Dec 15 16:58:43 2016 +0100

drm: Convert all helpers to drm_connector_list_iter

and so we can drop this again.

This fixes a locking inversion on nouveau, where the rpm code needs to
re-enable. But in other places the rpm_get() calls are nested within
the big modeset locks.

While at it, also improve the kerneldoc for these two functions a
notch.

v2: Update the kerneldoc even more to explain that these functions
can't be called concurrently, or bad things happen (Chris).

show more ...

Revert "drm/probe-helpers: Drop locking from poll_enable"

This reverts commit 3846fd9b86001bea171943cc3bb9222cb6da6b42.

There were some precursor commits missing for this around connector
locking,

Revert "drm/probe-helpers: Drop locking from poll_enable"

This reverts commit 3846fd9b86001bea171943cc3bb9222cb6da6b42.

There were some precursor commits missing for this around connector
locking, we should probably merge Lyude's nouveau avoid the problem patch.

show more ...

drm/probe-helpers: Drop locking from poll_enable

It was only needed to protect the connector_list walking, see

commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f
Author: Daniel Vetter <daniel.vetter@f

drm/probe-helpers: Drop locking from poll_enable

It was only needed to protect the connector_list walking, see

commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:26 2015 +0200

drm/probe-helper: Grab mode_config.mutex in poll_init/enable

Unfortunately the commit message of that patch fails to mention that
the new locking check was for the connector_list.

But that requirement disappeared in

commit c36a3254f7857f1ad9badbe3578ccc92be541a8e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Dec 15 16:58:43 2016 +0100

drm: Convert all helpers to drm_connector_list_iter

and so we can drop this again.

This fixes a locking inversion on nouveau, where the rpm code needs to
re-enable. But in other places the rpm_get() calls are nested within
the big modeset locks.

While at it, also improve the kerneldoc for these two functions a
notch.

v2: Update the kerneldoc even more to explain that these functions
can't be called concurrently, or bad things happen (Chris).

Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Lyude <lyude@redhat.com>
Reviewed-by: Lyude <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111090117.5134-1-daniel.vetter@ffwll.ch

show more ...

drm/kms-helpers: Extract drm_modeset_helper.[hc]

While reviewing docs I spotted that we have a few functions that
really just don't fit into their containing helper library section.
Extract them and

drm/kms-helpers: Extract drm_modeset_helper.[hc]

While reviewing docs I spotted that we have a few functions that
really just don't fit into their containing helper library section.
Extract them and shovel them all into a new library for random one-off
aux stuff.

v2: Remove wrongly added files for real.

Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-3-git-send-email-daniel.vetter@ffwll.ch

show more ...

drm: drm_helper_crtc_enable_color_mgmt() => drm_crtc_enable_color_mgmt()

Add drm_crtc_enable_color_mgmt(), remove drm_helper_crtc_enable_color_mgmt()
and update drm/i915-driver (the only user of the

drm: drm_helper_crtc_enable_color_mgmt() => drm_crtc_enable_color_mgmt()

Add drm_crtc_enable_color_mgmt(), remove drm_helper_crtc_enable_color_mgmt()
and update drm/i915-driver (the only user of the old function).

The new function is more flexible. It allows driver to enable only the
features it has without forcing to enable all three color management
properties: degamma lut, csc matrix (ctm), and gamma lut.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

show more ...

drm: introduce pipe color correction properties

Patch based on a previous series by Shashank Sharma.

This introduces optional properties to enable color correction at the
pipe level. It relies on 3

drm: introduce pipe color correction properties

Patch based on a previous series by Shashank Sharma.

This introduces optional properties to enable color correction at the
pipe level. It relies on 3 transformations applied to every pixels
displayed. First a lookup into a degamma table, then a multiplication
of the rgb components by a 3x3 matrix and finally another lookup into
a gamma table.

The following properties can be added to a pipe :
- DEGAMMA_LUT : blob containing degamma LUT
- DEGAMMA_LUT_SIZE : number of elements in DEGAMMA_LUT
- CTM : transformation matrix applied after the degamma LUT
- GAMMA_LUT : blob containing gamma LUT
- GAMMA_LUT_SIZE : number of elements in GAMMA_LUT

DEGAMMA_LUT_SIZE and GAMMA_LUT_SIZE are read only properties, set by
the driver to tell userspace applications what sizes should be the
lookup tables in DEGAMMA_LUT and GAMMA_LUT.

A helper is also provided so legacy gamma correction is redirected
through these new properties.

v2: Register LUT size properties as range

v3: Fix round in drm_color_lut_get_value() helper
More docs on how degamma/gamma properties are used

v4: Update contributors

v5: Rename CTM_MATRIX property to CTM (Doh!)
Add legacy gamma_set atomic helper
Describe CTM/LUT acronyms in the kernel doc

v6: Fix missing blob unref in drm_atomic_helper_crtc_reset

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Kumar, Kiran S <kiran.s.kumar@intel.com>
Signed-off-by: Kausal Malladi <kausalmalladi@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Rob Bradford <robert.bradford@intel.com>
[danvet: CrOS maintainers are also happy with the userspacde side:
https://codereview.chromium.org/1182063002/ ]
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456506302-640-4-git-send-email-lionel.g.landwerlin@intel.com

show more ...

drm: Drop drm_helper_probe_single_connector_modes_nomerge()

Now that the mode type bit merge logic is fixed to only merge
between new probed modes, hopefully we can eliminat the special
case for qxl

drm: Drop drm_helper_probe_single_connector_modes_nomerge()

Now that the mode type bit merge logic is fixed to only merge
between new probed modes, hopefully we can eliminat the special
case for qxl and virtio. That is make the merge the mode type
bits from all matching new probed modes, just like every other
driver.

qxl and virtio got excluded from the merging in
commit 3fbd6439e463 ("drm: copy mode type in drm_mode_connector_list_update()")
commit abce1ec9b08a ("Revert "drm: copy mode type in drm_mode_connector_list_update()"")
commit b87577b7c768 ("drm: try harder to avoid regression when merging mode bits")

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Resolve conflicts with doc updates.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

drm: Reorganize helper vtables and their docs

Currently we have 4 helper libraries (probe, crtc, plane & atomic)
that all use the same helper vtables. And that's by necessity since we
don't want to

drm: Reorganize helper vtables and their docs

Currently we have 4 helper libraries (probe, crtc, plane & atomic)
that all use the same helper vtables. And that's by necessity since we
don't want to litter the core structs with one ops pointer per helper
library. Also often the reuse the same hooks (like atomic does, to
facilite conversion from existing drivers using crtc and plane
helpers).

Given all that it doesn't make sense to put the docs for these next to
specific helpers. Instead extract them into a new header file and
section in the docbook, and add references to them everywhere.

Unfortunately kernel-doc complains when an include directive doesn't
find anything (and it does by dumping crap into the output file). We
have to remove the now empty includes to avoid that, instead of leaving
them in for future proofing.

v2: More OCD in ordering functions.

v3: Spelling plus collate copyright headers properly.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-4-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Thierry Reding <treding@nvidia.com>

show more ...

drm: Move LEAVE/ENTER_ATOMIC_MODESET to fbdev helpers

This is only used for kgdb (and previously panic) handlers in
the fbdev emulation, so belongs there.

Note that this means we'll leave behind a

drm: Move LEAVE/ENTER_ATOMIC_MODESET to fbdev helpers

This is only used for kgdb (and previously panic) handlers in
the fbdev emulation, so belongs there.

Note that this means we'll leave behind a forward declaration, but
once all the helper vtables are consolidated (in the next patch) that
will make more sense.

v2: fixup radone/amdgpu.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-3-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Thierry Reding <treding@nvidia.com> (v2)

show more ...

drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create()

Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the st

drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create()

Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2

drm_kms_helper_poll_enable() was converted to lock the mode_config
mutex in commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f
("drm/p

drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2

drm_kms_helper_poll_enable() was converted to lock the mode_config
mutex in commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f
("drm/probe-helper: Grab mode_config.mutex in poll_init/enable").

This disregarded the cases where this function is called from a context
where this mutex is already locked.

Add a non-locking version as well.

Changes since v1:
- use function name suffix '_locked' for the function that
is to be called from a locked context.

Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/atomic-helper: Add an atomice best_encoder callback

With legacy helpers all the routing was already set up when calling
best_encoder and so could be inspected. But with atomic it's staged,
hence

drm/atomic-helper: Add an atomice best_encoder callback

With legacy helpers all the routing was already set up when calling
best_encoder and so could be inspected. But with atomic it's staged,
hence we need a new atomic compliant callback for drivers which need
to inspect the requested state and can't just decided the best encoder
statically.

This is needed to fix up i915 dp mst where we need to pick the right
encoder depending upon the requested CRTC for the connector.

v2: Don't forget to amend the kerneldoc

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

drm: Make the connector dpms callback return a value, v2.

This is required to properly handle failing dpms calls.
When making a wait in i915 interruptible, I've noticed
that the dpms sequence could

drm: Make the connector dpms callback return a value, v2.

This is required to properly handle failing dpms calls.
When making a wait in i915 interruptible, I've noticed
that the dpms sequence could fail with -ERESTARTSYS because
it was waiting interruptibly for flips. So from now on
allow drivers to fail in their connector dpms callback.

Encoder and crtc dpms callbacks are unaffected.

Changes since v1:
- Update kerneldoc for the drm helper functions.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Resolve conflicts due to different merge order.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

drm/atomic: pass old crtc state to atomic_begin/flush.

In intel it's useful to keep track of some state changes with old
crtc state vs new state, for example to disable initial planes or
when a mode

drm/atomic: pass old crtc state to atomic_begin/flush.

In intel it's useful to keep track of some state changes with old
crtc state vs new state, for example to disable initial planes or
when a modeset's prevented during fastboot.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
[danvet: squash in fixup for exynos provided by Maarten.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

drm: make crtc/encoder/connector/plane helper_private a const pointer

They're only used to store const pointers anyway. This helps to keep
Ville and the compiler happy.

Signed-off-by: Jani Nikula <

drm: make crtc/encoder/connector/plane helper_private a const pointer

They're only used to store const pointers anyway. This helps to keep
Ville and the compiler happy.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...