ocfs2: cleanup trace events

After commit 6dc8bc0fb300 ("ocfs2: switch to iter_file_splice_write()"),
ocfs2 has switched from ocfs2_file_splice_write() to
iter_file_splice_write(), so cleanup the cor

ocfs2: cleanup trace events

After commit 6dc8bc0fb300 ("ocfs2: switch to iter_file_splice_write()"),
ocfs2 has switched from ocfs2_file_splice_write() to
iter_file_splice_write(), so cleanup the corresponding trace event as
well.

Link: https://lkml.kernel.org/r/20230528132033.217664-2-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

ocfs2: Provide a splice-read wrapper

Provide a splice_read wrapper for ocfs2. This emits trace lines and does
an atime lock/update before calling filemap_splice_read(). Splicing from
direct I/O is

ocfs2: Provide a splice-read wrapper

Provide a splice_read wrapper for ocfs2. This emits trace lines and does
an atime lock/update before calling filemap_splice_read(). Splicing from
direct I/O is handled by the caller.

A couple of new tracepoints are added for this purpose.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Mark Fasheh <mark@fasheh.com>
cc: Joel Becker <jlbec@evilplan.org>
cc: ocfs2-devel@oss.oracle.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-23-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

ocfs2: fix the application IO timeout when fstrim is running

The user reported this problem, the upper application IO was timeout
when fstrim was running on this ocfs2 partition. the application
mo

ocfs2: fix the application IO timeout when fstrim is running

The user reported this problem, the upper application IO was timeout
when fstrim was running on this ocfs2 partition. the application
monitoring resource agent considered that this application did not work,
then this node was fenced by the cluster brain (e.g. pacemaker).

The root cause is that fstrim thread always holds main_bm meta-file
related locks until all the cluster groups are trimmed. This patch will
make fstrim thread release main_bm meta-file related locks when each
cluster group is trimmed, this will let the current application IO has a
chance to claim the clusters from main_bm meta-file.

Link: http://lkml.kernel.org/r/20190111090014.31645-1-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: keep the trace point consistent with the function name

Keep the trace point consistent with the function name.

Link: http://lkml.kernel.org/r/02609aba-84b2-a22d-3f3b-bc1944b94260@huawei.com

ocfs2: keep the trace point consistent with the function name

Keep the trace point consistent with the function name.

Link: http://lkml.kernel.org/r/02609aba-84b2-a22d-3f3b-bc1944b94260@huawei.com
Fixes: 3ef045c3d8ae ("ocfs2: switch to ->write_iter()")
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Acked-by: Gang He <ghe@suse.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: nowait aio support

Return EAGAIN if any of the following checks fail for direct I/O:

- Cannot get the related locks immediately

- Blocks are not allocated at the write location, it will t

ocfs2: nowait aio support

Return EAGAIN if any of the following checks fail for direct I/O:

- Cannot get the related locks immediately

- Blocks are not allocated at the write location, it will trigger block
allocation and block IO operations.

[ghe@suse.com: v4]
Link: http://lkml.kernel.org/r/1516007283-29932-4-git-send-email-ghe@suse.com
[ghe@suse.com: v2]
Link: http://lkml.kernel.org/r/1511944612-9629-4-git-send-email-ghe@suse.com
Link: http://lkml.kernel.org/r/1511775987-841-4-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

switch generic_file_splice_read() to use of ->read_iter()

... and kill the ->splice_read() instances that can be switched to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ocfs2: code clean up for direct io

Clean up ocfs2_file_write_iter & ocfs2_prepare_inode_for_write:
* remove append dio check: it will be checked in ocfs2_direct_IO()
* remove file hole check: file

ocfs2: code clean up for direct io

Clean up ocfs2_file_write_iter & ocfs2_prepare_inode_for_write:
* remove append dio check: it will be checked in ocfs2_direct_IO()
* remove file hole check: file hole is supported for now
* remove inline data check: it will be checked in ocfs2_direct_IO()
* remove the full_coherence check when append dio: we will get the
inode_lock in ocfs2_dio_get_block, there is no need to fall back to
buffer io to ensure the coherence semantics.

Now the drop dio procedure is gone. :)

[akpm@linux-foundation.org: remove unused label]
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: check/fix inode block for online file check

Implement online check or fix inode block during reading a inode block
to memory.

Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Mark Fasheh <

ocfs2: check/fix inode block for online file check

Implement online check or fix inode block during reading a inode block
to memory.

Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: Implement get_next_id()

Implement get_next_id() callback to enable use of Q_GETNEXTQUOTA
quotactl for OCFS2.

Signed-off-by: Jan Kara <jack@suse.cz>

ocfs2: fix a tiny race when running dirop_fileop_racer

When running dirop_fileop_racer we found a dead lock case.

2 nodes, say Node A and Node B, mount the same ocfs2 volume. Create
/race/16/1 in

ocfs2: fix a tiny race when running dirop_fileop_racer

When running dirop_fileop_racer we found a dead lock case.

2 nodes, say Node A and Node B, mount the same ocfs2 volume. Create
/race/16/1 in the filesystem, and let the inode number of dir 16 is less
than the inode number of dir race.

Node A Node B
mv /race/16/1 /race/
right after Node A has got the
EX mode of /race/16/, and tries to
get EX mode of /race
ls /race/16/

In this case, Node A has got the EX mode of /race/16/, and wants to get EX
mode of /race/. Node B has got the PR mode of /race/, and wants to get
the PR mode of /race/16/. Since EX and PR are mutually exclusive, dead
lock happens.

This patch fixes this case by locking in ancestor order before trying
inode number order.

Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: lighten up allocate transaction

The issue scenario is as following:

When fallocating a very large disk space for a small file,
__ocfs2_extend_allocation attempts to get a very large transact

ocfs2: lighten up allocate transaction

The issue scenario is as following:

When fallocating a very large disk space for a small file,
__ocfs2_extend_allocation attempts to get a very large transaction. For
some journal sizes, there may be not enough room for this transaction,
and the fallocate will fail.

The patch below extends & restarts the transaction as necessary while
allocating space, and should work with even the smallest journal. This
patch refers ext4 resize.

Test:
# mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc
...(jounral size is 32M)
# mount.ocfs2 /dev/sdc /mnt/ocfs2/
# touch /mnt/ocfs2/1.log
# fallocate -o 0 -l 400G /mnt/ocfs2/1.log
fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory
# tail -f /var/log/messages
[ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048)
[ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12
[ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12
[ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12
^C
With this patch, the test works well.

Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: Add trace event for trim.

Add the corresponding trace event for trim.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>

ocfs2: Remove masklog ML_UPTODATE.

Remove mlog(0,...) and mlog(ML_UPTODATE,...) from
fs/ocfs2/uptodate.c and fs/ocfs2/buffer_head_io.c.

The masklog UPTODATE is removed finally.

Signed-off-by: Tao

ocfs2: Remove masklog ML_UPTODATE.

Remove mlog(0,...) and mlog(ML_UPTODATE,...) from
fs/ocfs2/uptodate.c and fs/ocfs2/buffer_head_io.c.

The masklog UPTODATE is removed finally.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

show more ...

ocfs2: Remove masklog ML_BH_IO.

Remove mlog(0,...) and mlog(ML_BH_IO,...) from
fs/ocfs2/buffer_head_io.c.
The masklog BH_IO is removed finally.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove masklog ML_JOURNAL.

Remove mlog(0) from fs/ocfs2/journal.c and the masklog JOURNAL.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove masklog ML_EXPORT.

Remove mlog(0) from fs/ocfs2/export.c and the masklog EXPORT.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove masklog ML_DCACHE.

Remove mlog(0) from fs/ocfs2/dcache.c and the masklog DCACHE.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove masklog ML_NAMEI.

Remove mlog(0) from fs/ocfs2/namei.c and the masklog NAMEI finally.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove mlog(0) from fs/ocfs2/dir.c

This is the 2nd step to remove the debug info of NAMEI.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove masklog ML_QUOTA.

Remove mlog(0) from fs/ocfs2/quota_global.c and
the masklog QUOTA.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove mlog(0) from quota_local.c.

Remove mlog(0) from fs/ocfs2/quota_local.c.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove masklog ML_RESERVATIONS.

Remove mlog(0) from fs/ocfs2/reservations.c and the masklog RESERVATIONS.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove masklog ML_XATTR.

Remove mlog(0) from fs/ocfs2/xattr.c and the masklog ML_XATTR.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>

ocfs2: Remove masklog ML_SUPER.

Remove mlog(0) from fs/ocfs2/super.c and the masklog SUPER.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>