fs: ocfs2: namei: check return value of ocfs2_add_entry()

Process result of ocfs2_add_entry() in case we have an error
value.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link

fs: ocfs2: namei: check return value of ocfs2_add_entry()

Process result of ocfs2_add_entry() in case we have an error
value.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link: https://lkml.kernel.org/r/20230803145417.177649-1-artem.chernyshev@red-soft.ru
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Kurt Hackel <kurt.hackel@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

ocfs2: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

ocfs2: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-60-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

show more ...

ocfs2: Switch to security_inode_init_security()

In preparation for removing security_old_inode_init_security(), switch to
security_inode_init_security().

Extend the existing ocfs2_initxattrs() to t

ocfs2: Switch to security_inode_init_security()

In preparation for removing security_old_inode_init_security(), switch to
security_inode_init_security().

Extend the existing ocfs2_initxattrs() to take the
ocfs2_security_xattr_info structure from fs_info, and populate the
name/value/len triple with the first xattr provided by LSMs.

As fs_info was not used before, ocfs2_initxattrs() can now handle the case
of replicating the behavior of security_old_inode_init_security(), i.e.
just obtaining the xattr, in addition to setting all xattrs provided by
LSMs.

Supporting multiple xattrs is not currently supported where
security_old_inode_init_security() was called (mknod, symlink), as it
requires non-trivial changes that can be done at a later time. Like for
reiserfs, even if EVM is invoked, it will not provide an xattr (if it is
not the first to set it, its xattr will be discarded; if it is the first,
it does not have xattrs to calculate the HMAC on).

Finally, since security_inode_init_security(), unlike
security_old_inode_init_security(), returns zero instead of -EOPNOTSUPP if
no xattrs were provided by LSMs or if inodes are private, additionally
check in ocfs2_init_security_get() if the xattr name is set.

If not, act as if security_old_inode_init_security() returned -EOPNOTSUPP,
and set si->enable to zero to notify to the functions following
ocfs2_init_security_get() that no xattrs are available.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

show more ...

fs: port privilege checking helpers to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
Th

fs: port privilege checking helpers to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port inode_init_owner() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is ju

fs: port inode_init_owner() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port ->rename() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just

fs: port ->rename() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port ->mknod() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just t

fs: port ->mknod() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port ->mkdir() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just t

fs: port ->mkdir() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port ->symlink() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just

fs: port ->symlink() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port ->create() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just

fs: port ->create() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

ocfs2: clear dinode links count in case of error

In ocfs2_mknod(), if error occurs after dinode successfully allocated,
ocfs2 i_links_count will not be 0.

So even though we clear inode i_nlink befo

ocfs2: clear dinode links count in case of error

In ocfs2_mknod(), if error occurs after dinode successfully allocated,
ocfs2 i_links_count will not be 0.

So even though we clear inode i_nlink before iput in error handling, it
still won't wipe inode since we'll refresh inode from dinode during inode
lock. So just like clear inode i_nlink, we clear ocfs2 i_links_count as
well. Also do the same change for ocfs2_symlink().

Link: https://lkml.kernel.org/r/20221017130227.234480-2-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

ocfs2: fix BUG when iput after ocfs2_mknod fails

Commit b1529a41f777 "ocfs2: should reclaim the inode if
'__ocfs2_mknod_locked' returns an error" tried to reclaim the claimed
inode if __ocfs2_mknod_

ocfs2: fix BUG when iput after ocfs2_mknod fails

Commit b1529a41f777 "ocfs2: should reclaim the inode if
'__ocfs2_mknod_locked' returns an error" tried to reclaim the claimed
inode if __ocfs2_mknod_locked() fails later. But this introduce a race,
the freed bit may be reused immediately by another thread, which will
update dinode, e.g. i_generation. Then iput this inode will lead to BUG:
inode->i_generation != le32_to_cpu(fe->i_generation)

We could make this inode as bad, but we did want to do operations like
wipe in some cases. Since the claimed inode bit can only affect that an
dinode is missing and will return back after fsck, it seems not a big
problem. So just leave it as is by revert the reclaim logic.

Link: https://lkml.kernel.org/r/20221017130227.234480-1-joseph.qi@linux.alibaba.com
Fixes: b1529a41f777 ("ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

fs: rename current get acl method

The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acl

fs: rename current get acl method

The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].

The current inode operation for getting posix acls takes an inode
argument but various filesystems (e.g., 9p, cifs, overlayfs) need access
to the dentry. In contrast to the ->set_acl() inode operation we cannot
simply extend ->get_acl() to take a dentry argument. The ->get_acl()
inode operation is called from:

acl_permission_check()
-> check_acl()
-> get_acl()

which is part of generic_permission() which in turn is part of
inode_permission(). Both generic_permission() and inode_permission() are
called in the ->permission() handler of various filesystems (e.g.,
overlayfs). So simply passing a dentry argument to ->get_acl() would
amount to also having to pass a dentry argument to ->permission(). We
should avoid this unnecessary change.

So instead of extending the existing inode operation rename it from
->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that
passes a dentry argument and which filesystems that need access to the
dentry can implement instead of ->get_inode_acl(). Filesystems like cifs
which allow setting and getting posix acls but not using them for
permission checking during lookup can simply not implement
->get_inode_acl().

This is intended to be a non-functional change.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: move S_ISGID stripping into the vfs_*() helpers

Move setgid handling out of individual filesystems and into the VFS
itself to stop the proliferation of setgid inheritance bugs.

Creating files t

fs: move S_ISGID stripping into the vfs_*() helpers

Move setgid handling out of individual filesystems and into the VFS
itself to stop the proliferation of setgid inheritance bugs.

Creating files that have both the S_IXGRP and S_ISGID bit raised in
directories that themselves have the S_ISGID bit set requires additional
privileges to avoid security issues.

When a filesystem creates a new inode it needs to take care that the
caller is either in the group of the newly created inode or they have
CAP_FSETID in their current user namespace and are privileged over the
parent directory of the new inode. If any of these two conditions is
true then the S_ISGID bit can be raised for an S_IXGRP file and if not
it needs to be stripped.

However, there are several key issues with the current implementation:

* S_ISGID stripping logic is entangled with umask stripping.

If a filesystem doesn't support or enable POSIX ACLs then umask
stripping is done directly in the vfs before calling into the
filesystem.
If the filesystem does support POSIX ACLs then unmask stripping may be
done in the filesystem itself when calling posix_acl_create().

Since umask stripping has an effect on S_ISGID inheritance, e.g., by
stripping the S_IXGRP bit from the file to be created and all relevant
filesystems have to call posix_acl_create() before inode_init_owner()
where we currently take care of S_ISGID handling S_ISGID handling is
order dependent. IOW, whether or not you get a setgid bit depends on
POSIX ACLs and umask and in what order they are called.

Note that technically filesystems are free to impose their own
ordering between posix_acl_create() and inode_init_owner() meaning
that there's additional ordering issues that influence S_SIGID
inheritance.

* Filesystems that don't rely on inode_init_owner() don't get S_ISGID
stripping logic.

While that may be intentional (e.g. network filesystems might just
defer setgid stripping to a server) it is often just a security issue.

This is not just ugly it's unsustainably messy especially since we do
still have bugs in this area years after the initial round of setgid
bugfixes.

So the current state is quite messy and while we won't be able to make
it completely clean as posix_acl_create() is still a filesystem specific
call we can improve the S_SIGD stripping situation quite a bit by
hoisting it out of inode_init_owner() and into the vfs creation
operations. This means we alleviate the burden for filesystems to handle
S_ISGID stripping correctly and can standardize the ordering between
S_ISGID and umask stripping in the vfs.

We add a new helper vfs_prepare_mode() so S_ISGID handling is now done
in the VFS before umask handling. This has S_ISGID handling is
unaffected unaffected by whether umask stripping is done by the VFS
itself (if no POSIX ACLs are supported or enabled) or in the filesystem
in posix_acl_create() (if POSIX ACLs are supported).

The vfs_prepare_mode() helper is called directly in vfs_*() helpers that
create new filesystem objects. We need to move them into there to make
sure that filesystems like overlayfs hat have callchains like:

sys_mknod()
-> do_mknodat(mode)
-> .mknod = ovl_mknod(mode)
-> ovl_create(mode)
-> vfs_mknod(mode)

get S_ISGID stripping done when calling into lower filesystems via
vfs_*() creation helpers. Moving vfs_prepare_mode() into e.g.
vfs_mknod() takes care of that. This is in any case semantically cleaner
because S_ISGID stripping is VFS security requirement.

Security hooks so far have seen the mode with the umask applied but
without S_ISGID handling done. The relevant hooks are called outside of
vfs_*() creation helpers so by calling vfs_prepare_mode() from vfs_*()
helpers the security hooks would now see the mode without umask
stripping applied. For now we fix this by passing the mode with umask
settings applied to not risk any regressions for LSM hooks. IOW, nothing
changes for LSM hooks. It is worth pointing out that security hooks
never saw the mode that is seen by the filesystem when actually creating
the file. They have always been completely misplaced for that to work.

The following filesystems use inode_init_owner() and thus relied on
S_ISGID stripping: spufs, 9p, bfs, btrfs, ext2, ext4, f2fs, hfsplus,
hugetlbfs, jfs, minix, nilfs2, ntfs3, ocfs2, omfs, overlayfs, ramfs,
reiserfs, sysv, ubifs, udf, ufs, xfs, zonefs, bpf, tmpfs.

All of the above filesystems end up calling inode_init_owner() when new
filesystem objects are created through the ->mkdir(), ->mknod(),
->create(), ->tmpfile(), ->rename() inode operations.

Since directories always inherit the S_ISGID bit with the exception of
xfs when irix_sgid_inherit mode is turned on S_ISGID stripping doesn't
apply. The ->symlink() and ->link() inode operations trivially inherit
the mode from the target and the ->rename() inode operation inherits the
mode from the source inode. All other creation inode operations will get
S_ISGID handling via vfs_prepare_mode() when called from their relevant
vfs_*() helpers.

In addition to this there are filesystems which allow the creation of
filesystem objects through ioctl()s or - in the case of spufs -
circumventing the vfs in other ways. If filesystem objects are created
through ioctl()s the vfs doesn't know about it and can't apply regular
permission checking including S_ISGID logic. Therfore, a filesystem
relying on S_ISGID stripping in inode_init_owner() in their ioctl()
callpath will be affected by moving this logic into the vfs. We audited
those filesystems:

* btrfs allows the creation of filesystem objects through various
ioctls(). Snapshot creation literally takes a snapshot and so the mode
is fully preserved and S_ISGID stripping doesn't apply.

Creating a new subvolum relies on inode_init_owner() in
btrfs_new_subvol_inode() but only creates directories and doesn't
raise S_ISGID.

* ocfs2 has a peculiar implementation of reflinks. In contrast to e.g.
xfs and btrfs FICLONE/FICLONERANGE ioctl() that is only concerned with
the actual extents ocfs2 uses a separate ioctl() that also creates the
target file.

Iow, ocfs2 circumvents the vfs entirely here and did indeed rely on
inode_init_owner() to strip the S_ISGID bit. This is the only place
where a filesystem needs to call mode_strip_sgid() directly but this
is self-inflicted pain.

* spufs doesn't go through the vfs at all and doesn't use ioctl()s
either. Instead it has a dedicated system call spufs_create() which
allows the creation of filesystem objects. But spufs only creates
directories and doesn't allo S_SIGID bits, i.e. it specifically only
allows 0777 bits.

* bpf uses vfs_mkobj() but also doesn't allow S_ISGID bits to be created.

The patch will have an effect on ext2 when the EXT2_MOUNT_GRPID mount
option is used, on ext4 when the EXT4_MOUNT_GRPID mount option is used,
and on xfs when the XFS_FEAT_GRPID mount option is used. When any of
these filesystems are mounted with their respective GRPID option then
newly created files inherit the parent directories group
unconditionally. In these cases non of the filesystems call
inode_init_owner() and thus did never strip the S_ISGID bit for newly
created files. Moving this logic into the VFS means that they now get
the S_ISGID bit stripped. This is a user visible change. If this leads
to regressions we will either need to figure out a better way or we need
to revert. However, given the various setgid bugs that we found just in
the last two years this is a regression risk we should take.

Associated with this change is a new set of fstests to enforce the
semantics for all new filesystems.

Link: https://lore.kernel.org/ceph-devel/20220427092201.wvsdjbnc7b4dttaw@wittgenstein [1]
Link: e014f37db1a2 ("xfs: use setattr_copy to set vfs inode attributes") [2]
Link: 01ea173e103e ("xfs: fix up non-directory creation in SGID directories") [3]
Link: fd84bfdddd16 ("ceph: fix up non-directory creation in SGID directories") [4]
Link: https://lore.kernel.org/r/1657779088-2242-3-git-send-email-xuyang2018.jy@fujitsu.com
Suggested-by: Dave Chinner <david@fromorbit.com>
Suggested-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
[<brauner@kernel.org>: rewrote commit message]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs/ocfs2: fix comments mentioning i_mutex

inode->i_mutex has been replaced with inode->i_rwsem long ago. Fix
comments still mentioning i_mutex.

Link: https://lkml.kernel.org/r/20220214031314.10009

fs/ocfs2: fix comments mentioning i_mutex

inode->i_mutex has been replaced with inode->i_rwsem long ago. Fix
comments still mentioning i_mutex.

Link: https://lkml.kernel.org/r/20220214031314.100094-1-hongnan.li@linux.alibaba.com
Signed-off-by: hongnanli <hongnan.li@linux.alibaba.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: fix BUG when iput after ocfs2_mknod fails

commit 759a7c6126eef5635506453e9b9d55a6a3ac2084 upstream.

Commit b1529a41f777 "ocfs2: should reclaim the inode if
'__ocfs2_mknod_locked' returns an

ocfs2: fix BUG when iput after ocfs2_mknod fails

commit 759a7c6126eef5635506453e9b9d55a6a3ac2084 upstream.

Commit b1529a41f777 "ocfs2: should reclaim the inode if
'__ocfs2_mknod_locked' returns an error" tried to reclaim the claimed
inode if __ocfs2_mknod_locked() fails later. But this introduce a race,
the freed bit may be reused immediately by another thread, which will
update dinode, e.g. i_generation. Then iput this inode will lead to BUG:
inode->i_generation != le32_to_cpu(fe->i_generation)

We could make this inode as bad, but we did want to do operations like
wipe in some cases. Since the claimed inode bit can only affect that an
dinode is missing and will return back after fsck, it seems not a big
problem. So just leave it as is by revert the reclaim logic.

Link: https://lkml.kernel.org/r/20221017130227.234480-1-joseph.qi@linux.alibaba.com
Fixes: b1529a41f777 ("ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ocfs2: clear dinode links count in case of error

commit 28f4821b1b53e0649706912e810c6c232fc506f9 upstream.

In ocfs2_mknod(), if error occurs after dinode successfully allocated,
ocfs2 i_links_count

ocfs2: clear dinode links count in case of error

commit 28f4821b1b53e0649706912e810c6c232fc506f9 upstream.

In ocfs2_mknod(), if error occurs after dinode successfully allocated,
ocfs2 i_links_count will not be 0.

So even though we clear inode i_nlink before iput in error handling, it
still won't wipe inode since we'll refresh inode from dinode during inode
lock. So just like clear inode i_nlink, we clear ocfs2 i_links_count as
well. Also do the same change for ocfs2_symlink().

Link: https://lkml.kernel.org/r/20221017130227.234480-2-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

treewide: remove editor modelines and cruft

The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."

treewide: remove editor modelines and cruft

The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."

I recently receive a patch to explicitly add a new one.

Let's do treewide cleanups, otherwise some people follow the existing code
and attempt to upstream their favoriate editor setups.

It is even nicer if scripts/checkpatch.pl can check it.

If we like to impose coding style in an editor-independent manner, I think
editorconfig (patch [1]) is a saner solution.

[1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/

Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: convert to fileattr

Use the fileattr API to let the VFS handle locking, permission checking and
conversion.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Joel Becker <jlbec@evilpla

ocfs2: convert to fileattr

Use the fileattr API to let the VFS handle locking, permission checking and
conversion.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Joel Becker <jlbec@evilplan.org>

show more ...

fs: make helpers idmap mount aware

Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has b

fs: make helpers idmap mount aware

Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

show more ...

inode: make init and permission helpers idmapped mount aware

The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. All

inode: make init and permission helpers idmapped mount aware

The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

show more ...

ocfs2: ratelimit the 'max lookup times reached' notice

Running stress-ng on ocfs2 completely fills the kernel log with 'max
lookup times reached, filesystem may have nested directories.'

Let's rate

ocfs2: ratelimit the 'max lookup times reached' notice

Running stress-ng on ocfs2 completely fills the kernel log with 'max
lookup times reached, filesystem may have nested directories.'

Let's ratelimit this message as done with others in the code.

Test-case:

# mkfs.ocfs2 --mount local $DEV
# mount $DEV $MNT
# cd $MNT

# dmesg -C
# stress-ng --dirdeep 1 --dirdeep-ops 1000
# dmesg | grep -c 'max lookup times reached'

Before:

# dmesg -C
# stress-ng --dirdeep 1 --dirdeep-ops 1000
...
stress-ng: info: [11116] successful run completed in 3.03s

# dmesg | grep -c 'max lookup times reached'
967

After:

# dmesg -C
# stress-ng --dirdeep 1 --dirdeep-ops 1000
...
stress-ng: info: [739] successful run completed in 0.96s

# dmesg | grep -c 'max lookup times reached'
10

# dmesg
[ 259.086086] ocfs2_check_if_ancestor: 1990 callbacks suppressed
[ 259.086092] (stress-ng-dirde,740,1):ocfs2_check_if_ancestor:1091 max lookup times reached, filesystem may have nested directories, src inode: 18007, dest inode: 17940.
...

Link: https://lkml.kernel.org/r/20201001224417.478263-1-mfo@canonical.com
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

treewide: Remove uninitialized_var() usage

Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused vari

treewide: Remove uninitialized_var() usage

Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.

In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:

git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'

drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.

No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.

[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/

Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>

show more ...

ocfs2: roll back the reference count modification of the parent directory if an error occurs

Under some conditions, the directory cannot be deleted. The specific
scenarios are as follows: (for exam

ocfs2: roll back the reference count modification of the parent directory if an error occurs

Under some conditions, the directory cannot be deleted. The specific
scenarios are as follows: (for example, /mnt/ocfs2 is the mount point)

1. Create the /mnt/ocfs2/p_dir directory. At this time, the i_nlink
corresponding to the inode of the /mnt/ocfs2/p_dir directory is equal
to 2.

2. During the process of creating the /mnt/ocfs2/p_dir/s_dir
directory, if the call to the inc_nlink function in ocfs2_mknod
succeeds, the functions such as ocfs2_init_acl,
ocfs2_init_security_set, and ocfs2_dentry_attach_lock fail. At this
time, the i_nlink corresponding to the inode of the /mnt/ocfs2/p_dir
directory is equal to 3, but /mnt/ocfs2/p_dir/s_dir is not added to the
/mnt/ocfs2/p_dir directory entry.

3. Delete the /mnt/ocfs2/p_dir directory (rm -rf /mnt/ocfs2/p_dir).
At this time, it is found that the i_nlink corresponding to the inode
corresponding to the /mnt/ocfs2/p_dir directory is equal to 3.
Therefore, the /mnt/ocfs2/p_dir directory cannot be deleted.

Signed-off-by: Jian wang <wangjian161@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/a44f6666-bbc4-405e-0e6c-0f4e922eeef6@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

ocfs2: use ocfs2_update_inode_fsync_trans() to access t_tid in handle->h_transaction

For the uniform format, we use ocfs2_update_inode_fsync_trans() to
access t_tid in handle->h_transaction

Link: h

ocfs2: use ocfs2_update_inode_fsync_trans() to access t_tid in handle->h_transaction

For the uniform format, we use ocfs2_update_inode_fsync_trans() to
access t_tid in handle->h_transaction

Link: http://lkml.kernel.org/r/6ff9a312-5f7d-0e27-fb51-bc4e062fcd97@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...