jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than

jffs2: prevent xattr node from overflowing the eraseblock

[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]

Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

jffs2: reduce stack usage in jffs2_build_xattr_subsystem()

Use kcalloc() for allocation/flush of 128 pointers table to
reduce stack usage.

Function now returns -ENOMEM or 0 on success.

stackusage

jffs2: reduce stack usage in jffs2_build_xattr_subsystem()

Use kcalloc() for allocation/flush of 128 pointers table to
reduce stack usage.

Function now returns -ENOMEM or 0 on success.

stackusage
Before:
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 1208
dynamic,bounded

After:
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 192
dynamic,bounded

Also update definition when CONFIG_JFFS2_FS_XATTR is not enabled

Tested with an MTD mount point and some user set/getfattr.

Many current target on OpenWRT also suffer from a compilation warning
(that become an error with CONFIG_WERROR) with the following output:

fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem':
fs/jffs2/xattr.c:887:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
887 | }
| ^

Using dynamic allocation fix this compilation warning.

Fixes: c9f700f840bd ("[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion")
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Message-Id: <20230506045612.16616-1-ansuelsmth@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

show more ...

fs: rename generic posix acl handlers

Reflect in their naming and document that they are kept around for
legacy reasons and shouldn't be used anymore by new code.

Reviewed-by: Christoph Hellwig <hc

fs: rename generic posix acl handlers

Reflect in their naming and document that they are kept around for
legacy reasons and shouldn't be used anymore by new code.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: simplify ->listxattr() implementation

The ext{2,4}, erofs, f2fs, and jffs2 filesystems use the same logic to
check whether a given xattr can be listed. Simplify them and avoid
open-coding the sa

fs: simplify ->listxattr() implementation

The ext{2,4}, erofs, f2fs, and jffs2 filesystems use the same logic to
check whether a given xattr can be listed. Simplify them and avoid
open-coding the same check by calling the helper we introduced earlier.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-erofs@lists.ozlabs.org
Cc: linux-ext4@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: drop unused posix acl handlers

Remove struct posix_acl_{access,default}_handler for all filesystems
that don't depend on the xattr handler in their inode->i_op->listxattr()
method in any way. Th

fs: drop unused posix acl handlers

Remove struct posix_acl_{access,default}_handler for all filesystems
that don't depend on the xattr handler in their inode->i_op->listxattr()
method in any way. There's nothing more to do than to simply remove the
handler. It's been effectively unused ever since we introduced the new
posix acl api.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

xattr handlers: Simplify list operation

Change the list operation to only return whether or not an attribute
should be listed. Copying the attribute names into the buffer is moved
to the callers.

xattr handlers: Simplify list operation

Change the list operation to only return whether or not an attribute
should be listed. Copying the attribute names into the buffer is moved
to the callers.

Since the result only depends on the dentry and not on the attribute
name, we do not pass the attribute name to list operations.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

xattr handlers: Pass handler to operations instead of flags

The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate betw

xattr handlers: Pass handler to operations instead of flags

The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate between
different handlers; some file systems use that to distinguish the xattr
namespace, for example. In some oprations, it would be useful to also have
access to the handler prefix. To allow that, pass a pointer to the handler
to operations instead of the flags value alone.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

VFS: normal filesystems (and lustre): d_inode() annotations

that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by:

VFS: normal filesystems (and lustre): d_inode() annotations

that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

jffs2: remove an unneeded condition

We know "rc" is set so there is no need to check again.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gm

jffs2: remove an unneeded condition

We know "rc" is set so there is no need to check again.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

show more ...

treewide: Fix typo in printk messages

This patch fix spelling typo in printk messages.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off

treewide: Fix typo in printk messages

This patch fix spelling typo in printk messages.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

fs/jffs2/xattr.c: remove null test before kfree

Fix checkpatch warning:
WARNING: kfree(NULL) is safe this check is probably not required

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@list

fs/jffs2/xattr.c: remove null test before kfree

Fix checkpatch warning:
WARNING: kfree(NULL) is safe this check is probably not required

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

show more ...

jffs2: use generic posix ACL infrastructure

Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux.

Signed-off

jffs2: use generic posix ACL infrastructure

Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

jffs2: allow to complete xattr integrity check on first GC scan

Unlike file data integrity the xattr data integrity was not checked
before some explicit access to the attribute was made.

This could

jffs2: allow to complete xattr integrity check on first GC scan

Unlike file data integrity the xattr data integrity was not checked
before some explicit access to the attribute was made.

This could leave in the system a number of corrupted extended attributes
which will be detected only at access time and possibly at a very late
time compared to the time the corruption actually happened.

This patch adds the ability to check for extended attribute integrity
on first GC scan pass (similar to file data integrity check). This allows
for all present attributes to be completly verified before any use of them.

In order to work correctly this patch also needs the patch allowing
JFFS2 to discriminate between recoverable and non recoverable errors
on extended attributes.

Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

show more ...

jffs2: allow to discriminate between recoverable and non-recoverable errors

This patch is basically a revert of commit f326966b3df47f4fa7e90425f60efdd30c31fe19.

It allows JFFS2 to make the distinct

jffs2: allow to discriminate between recoverable and non-recoverable errors

This patch is basically a revert of commit f326966b3df47f4fa7e90425f60efdd30c31fe19.

It allows JFFS2 to make the distinction between a potential transient
error (reading or writing the media) and a non recoverable error like a
bad CRC on the extended attribute data or some insconsitent parameters.

In order to make clear that the error is indeed intended to report a
corrupted attribute, a new local error code (JFFS2_XATTR_IS_CORRUPTED)
is introduced rather than returning a confusing positive EIO, which is
what led to the inappropriate "fix" last time.

This error code is never reported to user space and only checked locally
in this file.

Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

show more ...

jffs2: Standardize JFFS_<LEVEL> uses

Use pr_<level> to prefix KBUILD_MODNAME via pr_fmt.

Remove obfuscating defines and use constants in pr_<level>
No need for a do {} while (0) for single statemen

jffs2: Standardize JFFS_<LEVEL> uses

Use pr_<level> to prefix KBUILD_MODNAME via pr_fmt.

Remove obfuscating defines and use constants in pr_<level>
No need for a do {} while (0) for single statements.

Form of JFFS_<LEVEL> output changes from
"JFFS2 notice: " to "jffs2: notice: "

Added pr_fmt to xattr.c

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

show more ...

jffs2: remove a trailing white space in commentaries

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <Da

jffs2: remove a trailing white space in commentaries

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

show more ...

jffs2: fix error value sign

do_verify_xattr_datum(), do_load_xattr_datum(), load_xattr_datum()
and verify_xattr_ref() should return negative value on error.
Sometimes they return EIO that is positiv

jffs2: fix error value sign

do_verify_xattr_datum(), do_load_xattr_datum(), load_xattr_datum()
and verify_xattr_ref() should return negative value on error.
Sometimes they return EIO that is positive. Change this to -EIO.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

show more ...

convert remaining ->clear_inode() to ->evict_inode()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fix up trivial spelling errors ('taht' -> 'that')

Pointed out by Lucas who found the new one in a comment in
setup_percpu.c. And then I fixed the others that I grepped
for.

Reported-by: Lucas <cano

Fix up trivial spelling errors ('taht' -> 'that')

Pointed out by Lucas who found the new one in a comment in
setup_percpu.c. And then I fixed the others that I grepped
for.

Reported-by: Lucas <canolucas@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...