Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15 |
|
#
9cdd3128 |
| 14-Jan-2022 |
Baokun Li <libaokun1@huawei.com> |
jffs2: fix memory leak in jffs2_scan_medium
If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report:
jffs2: fix memory leak in jffs2_scan_medium
If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report:
-------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910 [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0 [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794 [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267 [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0 [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400 [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0 [<ffffffffb0316478>] get_tree_mtd+0x498/0x840 [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30 [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0 [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50 [<ffffffffaea7c3d7>] do_mount+0x107/0x130 [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0 [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160 [<ffffffffb10142f5>] do_syscall_64+0x45/0x70 unreferenced object 0xffff888114b54840 (size 32): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u.............. 00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90 [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794 [...] unreferenced object 0xffff888114b57280 (size 32): comm "mount", pid 692, jiffies 4294838393 (age 34.357s) hex dump (first 32 bytes): 10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l............. 00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90 [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794 [...] unreferenced object 0xffff8881116cd510 (size 16): comm "mount", pid 692, jiffies 4294838395 (age 34.355s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90 [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794 [...] --------------------------------------------
Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis)
Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Cc: stable@vger.kernel.org Co-developed-with: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
#
52ba0ab4 |
| 14-Jan-2022 |
Baokun Li <libaokun1@huawei.com> |
jffs2: fix memory leak in jffs2_scan_medium
commit 9cdd3128874f5fe759e2c4e1360ab7fb96a8d1df upstream.
If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_
jffs2: fix memory leak in jffs2_scan_medium
commit 9cdd3128874f5fe759e2c4e1360ab7fb96a8d1df upstream.
If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report:
-------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910 [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0 [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794 [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267 [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0 [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400 [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0 [<ffffffffb0316478>] get_tree_mtd+0x498/0x840 [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30 [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0 [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50 [<ffffffffaea7c3d7>] do_mount+0x107/0x130 [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0 [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160 [<ffffffffb10142f5>] do_syscall_64+0x45/0x70 unreferenced object 0xffff888114b54840 (size 32): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u.............. 00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90 [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794 [...] unreferenced object 0xffff888114b57280 (size 32): comm "mount", pid 692, jiffies 4294838393 (age 34.357s) hex dump (first 32 bytes): 10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l............. 00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90 [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794 [...] unreferenced object 0xffff8881116cd510 (size 16): comm "mount", pid 692, jiffies 4294838395 (age 34.355s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90 [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794 [...] --------------------------------------------
Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis)
Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Cc: stable@vger.kernel.org Co-developed-with: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25 |
|
#
960b9a8a |
| 17-Mar-2021 |
lizhe <lizhe67@huawei.com> |
jffs2: Fix kasan slab-out-of-bounds problem
KASAN report a slab-out-of-bounds problem. The logs are listed below. It is because in function jffs2_scan_dirent_node, we alloc "checkedlen+1" bytes for
jffs2: Fix kasan slab-out-of-bounds problem
KASAN report a slab-out-of-bounds problem. The logs are listed below. It is because in function jffs2_scan_dirent_node, we alloc "checkedlen+1" bytes for fd->name and we check crc with length rd->nsize. If checkedlen is less than rd->nsize, it will cause the slab-out-of-bounds problem.
jffs2: Dirent at *** has zeroes in name. Truncating to %d char ================================================================== BUG: KASAN: slab-out-of-bounds in crc32_le+0x1ce/0x260 at addr ffff8800842cf2d1 Read of size 1 by task test_JFFS2/915 ============================================================================= BUG kmalloc-64 (Tainted: G B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in jffs2_alloc_full_dirent+0x2a/0x40 age=0 cpu=1 pid=915 ___slab_alloc+0x580/0x5f0 __slab_alloc.isra.24+0x4e/0x64 __kmalloc+0x170/0x300 jffs2_alloc_full_dirent+0x2a/0x40 jffs2_scan_eraseblock+0x1ca4/0x3b64 jffs2_scan_medium+0x285/0xfe0 jffs2_do_mount_fs+0x5fb/0x1bbc jffs2_do_fill_super+0x245/0x6f0 jffs2_fill_super+0x287/0x2e0 mount_mtd_aux.isra.0+0x9a/0x144 mount_mtd+0x222/0x2f0 jffs2_mount+0x41/0x60 mount_fs+0x63/0x230 vfs_kern_mount.part.6+0x6c/0x1f4 do_mount+0xae8/0x1940 SyS_mount+0x105/0x1d0 INFO: Freed in jffs2_free_full_dirent+0x22/0x40 age=27 cpu=1 pid=915 __slab_free+0x372/0x4e4 kfree+0x1d4/0x20c jffs2_free_full_dirent+0x22/0x40 jffs2_build_remove_unlinked_inode+0x17a/0x1e4 jffs2_do_mount_fs+0x1646/0x1bbc jffs2_do_fill_super+0x245/0x6f0 jffs2_fill_super+0x287/0x2e0 mount_mtd_aux.isra.0+0x9a/0x144 mount_mtd+0x222/0x2f0 jffs2_mount+0x41/0x60 mount_fs+0x63/0x230 vfs_kern_mount.part.6+0x6c/0x1f4 do_mount+0xae8/0x1940 SyS_mount+0x105/0x1d0 entry_SYSCALL_64_fastpath+0x1e/0x97 Call Trace: [<ffffffff815befef>] dump_stack+0x59/0x7e [<ffffffff812d1d65>] print_trailer+0x125/0x1b0 [<ffffffff812d82c8>] object_err+0x34/0x40 [<ffffffff812dadef>] kasan_report.part.1+0x21f/0x534 [<ffffffff81132401>] ? vprintk+0x2d/0x40 [<ffffffff815f1ee2>] ? crc32_le+0x1ce/0x260 [<ffffffff812db41a>] kasan_report+0x26/0x30 [<ffffffff812d9fc1>] __asan_load1+0x3d/0x50 [<ffffffff815f1ee2>] crc32_le+0x1ce/0x260 [<ffffffff814764ae>] ? jffs2_alloc_full_dirent+0x2a/0x40 [<ffffffff81485cec>] jffs2_scan_eraseblock+0x1d0c/0x3b64 [<ffffffff81488813>] ? jffs2_scan_medium+0xccf/0xfe0 [<ffffffff81483fe0>] ? jffs2_scan_make_ino_cache+0x14c/0x14c [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff812d5d90>] ? kmem_cache_alloc_trace+0x10c/0x2cc [<ffffffff818169fb>] ? mtd_point+0xf7/0x130 [<ffffffff81487dc9>] jffs2_scan_medium+0x285/0xfe0 [<ffffffff81487b44>] ? jffs2_scan_eraseblock+0x3b64/0x3b64 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff812d57df>] ? __kmalloc+0x12b/0x300 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff814a2753>] ? jffs2_sum_init+0x9f/0x240 [<ffffffff8148b2ff>] jffs2_do_mount_fs+0x5fb/0x1bbc [<ffffffff8148ad04>] ? jffs2_del_noinode_dirent+0x640/0x640 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff81127c5b>] ? __init_rwsem+0x97/0xac [<ffffffff81492349>] jffs2_do_fill_super+0x245/0x6f0 [<ffffffff81493c5b>] jffs2_fill_super+0x287/0x2e0 [<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594 [<ffffffff81819bea>] mount_mtd_aux.isra.0+0x9a/0x144 [<ffffffff81819eb6>] mount_mtd+0x222/0x2f0 [<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594 [<ffffffff81819c94>] ? mount_mtd_aux.isra.0+0x144/0x144 [<ffffffff81258757>] ? free_pages+0x13/0x1c [<ffffffff814fa0ac>] ? selinux_sb_copy_data+0x278/0x2e0 [<ffffffff81492b35>] jffs2_mount+0x41/0x60 [<ffffffff81302fb7>] mount_fs+0x63/0x230 [<ffffffff8133755f>] ? alloc_vfsmnt+0x32f/0x3b0 [<ffffffff81337f2c>] vfs_kern_mount.part.6+0x6c/0x1f4 [<ffffffff8133ceec>] do_mount+0xae8/0x1940 [<ffffffff811b94e0>] ? audit_filter_rules.constprop.6+0x1d10/0x1d10 [<ffffffff8133c404>] ? copy_mount_string+0x40/0x40 [<ffffffff812cbf78>] ? alloc_pages_current+0xa4/0x1bc [<ffffffff81253a89>] ? __get_free_pages+0x25/0x50 [<ffffffff81338993>] ? copy_mount_options.part.17+0x183/0x264 [<ffffffff8133e3a9>] SyS_mount+0x105/0x1d0 [<ffffffff8133e2a4>] ? copy_mnt_ns+0x560/0x560 [<ffffffff810e8391>] ? msa_space_switch_handler+0x13d/0x190 [<ffffffff81be184a>] entry_SYSCALL_64_fastpath+0x1e/0x97 [<ffffffff810e9274>] ? msa_space_switch+0xb0/0xe0 Memory state around the buggy address: ffff8800842cf180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800842cf280: fc fc fc fc fc fc 00 00 00 00 01 fc fc fc fc fc ^ ffff8800842cf300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ==================================================================
Cc: stable@vger.kernel.org Reported-by: Kunkun Xu <xukunkun1@huawei.com> Signed-off-by: lizhe <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
#
72c282b1 |
| 17-Mar-2021 |
lizhe <lizhe67@huawei.com> |
jffs2: Fix kasan slab-out-of-bounds problem
commit 960b9a8a7676b9054d8b46a2c7db52a0c8766b56 upstream.
KASAN report a slab-out-of-bounds problem. The logs are listed below. It is because in function
jffs2: Fix kasan slab-out-of-bounds problem
commit 960b9a8a7676b9054d8b46a2c7db52a0c8766b56 upstream.
KASAN report a slab-out-of-bounds problem. The logs are listed below. It is because in function jffs2_scan_dirent_node, we alloc "checkedlen+1" bytes for fd->name and we check crc with length rd->nsize. If checkedlen is less than rd->nsize, it will cause the slab-out-of-bounds problem.
jffs2: Dirent at *** has zeroes in name. Truncating to %d char ================================================================== BUG: KASAN: slab-out-of-bounds in crc32_le+0x1ce/0x260 at addr ffff8800842cf2d1 Read of size 1 by task test_JFFS2/915 ============================================================================= BUG kmalloc-64 (Tainted: G B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in jffs2_alloc_full_dirent+0x2a/0x40 age=0 cpu=1 pid=915 ___slab_alloc+0x580/0x5f0 __slab_alloc.isra.24+0x4e/0x64 __kmalloc+0x170/0x300 jffs2_alloc_full_dirent+0x2a/0x40 jffs2_scan_eraseblock+0x1ca4/0x3b64 jffs2_scan_medium+0x285/0xfe0 jffs2_do_mount_fs+0x5fb/0x1bbc jffs2_do_fill_super+0x245/0x6f0 jffs2_fill_super+0x287/0x2e0 mount_mtd_aux.isra.0+0x9a/0x144 mount_mtd+0x222/0x2f0 jffs2_mount+0x41/0x60 mount_fs+0x63/0x230 vfs_kern_mount.part.6+0x6c/0x1f4 do_mount+0xae8/0x1940 SyS_mount+0x105/0x1d0 INFO: Freed in jffs2_free_full_dirent+0x22/0x40 age=27 cpu=1 pid=915 __slab_free+0x372/0x4e4 kfree+0x1d4/0x20c jffs2_free_full_dirent+0x22/0x40 jffs2_build_remove_unlinked_inode+0x17a/0x1e4 jffs2_do_mount_fs+0x1646/0x1bbc jffs2_do_fill_super+0x245/0x6f0 jffs2_fill_super+0x287/0x2e0 mount_mtd_aux.isra.0+0x9a/0x144 mount_mtd+0x222/0x2f0 jffs2_mount+0x41/0x60 mount_fs+0x63/0x230 vfs_kern_mount.part.6+0x6c/0x1f4 do_mount+0xae8/0x1940 SyS_mount+0x105/0x1d0 entry_SYSCALL_64_fastpath+0x1e/0x97 Call Trace: [<ffffffff815befef>] dump_stack+0x59/0x7e [<ffffffff812d1d65>] print_trailer+0x125/0x1b0 [<ffffffff812d82c8>] object_err+0x34/0x40 [<ffffffff812dadef>] kasan_report.part.1+0x21f/0x534 [<ffffffff81132401>] ? vprintk+0x2d/0x40 [<ffffffff815f1ee2>] ? crc32_le+0x1ce/0x260 [<ffffffff812db41a>] kasan_report+0x26/0x30 [<ffffffff812d9fc1>] __asan_load1+0x3d/0x50 [<ffffffff815f1ee2>] crc32_le+0x1ce/0x260 [<ffffffff814764ae>] ? jffs2_alloc_full_dirent+0x2a/0x40 [<ffffffff81485cec>] jffs2_scan_eraseblock+0x1d0c/0x3b64 [<ffffffff81488813>] ? jffs2_scan_medium+0xccf/0xfe0 [<ffffffff81483fe0>] ? jffs2_scan_make_ino_cache+0x14c/0x14c [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff812d5d90>] ? kmem_cache_alloc_trace+0x10c/0x2cc [<ffffffff818169fb>] ? mtd_point+0xf7/0x130 [<ffffffff81487dc9>] jffs2_scan_medium+0x285/0xfe0 [<ffffffff81487b44>] ? jffs2_scan_eraseblock+0x3b64/0x3b64 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff812d57df>] ? __kmalloc+0x12b/0x300 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff814a2753>] ? jffs2_sum_init+0x9f/0x240 [<ffffffff8148b2ff>] jffs2_do_mount_fs+0x5fb/0x1bbc [<ffffffff8148ad04>] ? jffs2_del_noinode_dirent+0x640/0x640 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff81127c5b>] ? __init_rwsem+0x97/0xac [<ffffffff81492349>] jffs2_do_fill_super+0x245/0x6f0 [<ffffffff81493c5b>] jffs2_fill_super+0x287/0x2e0 [<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594 [<ffffffff81819bea>] mount_mtd_aux.isra.0+0x9a/0x144 [<ffffffff81819eb6>] mount_mtd+0x222/0x2f0 [<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594 [<ffffffff81819c94>] ? mount_mtd_aux.isra.0+0x144/0x144 [<ffffffff81258757>] ? free_pages+0x13/0x1c [<ffffffff814fa0ac>] ? selinux_sb_copy_data+0x278/0x2e0 [<ffffffff81492b35>] jffs2_mount+0x41/0x60 [<ffffffff81302fb7>] mount_fs+0x63/0x230 [<ffffffff8133755f>] ? alloc_vfsmnt+0x32f/0x3b0 [<ffffffff81337f2c>] vfs_kern_mount.part.6+0x6c/0x1f4 [<ffffffff8133ceec>] do_mount+0xae8/0x1940 [<ffffffff811b94e0>] ? audit_filter_rules.constprop.6+0x1d10/0x1d10 [<ffffffff8133c404>] ? copy_mount_string+0x40/0x40 [<ffffffff812cbf78>] ? alloc_pages_current+0xa4/0x1bc [<ffffffff81253a89>] ? __get_free_pages+0x25/0x50 [<ffffffff81338993>] ? copy_mount_options.part.17+0x183/0x264 [<ffffffff8133e3a9>] SyS_mount+0x105/0x1d0 [<ffffffff8133e2a4>] ? copy_mnt_ns+0x560/0x560 [<ffffffff810e8391>] ? msa_space_switch_handler+0x13d/0x190 [<ffffffff81be184a>] entry_SYSCALL_64_fastpath+0x1e/0x97 [<ffffffff810e9274>] ? msa_space_switch+0xb0/0xe0 Memory state around the buggy address: ffff8800842cf180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800842cf280: fc fc fc fc fc fc 00 00 00 00 01 fc fc fc fc fc ^ ffff8800842cf300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ==================================================================
Cc: stable@vger.kernel.org Reported-by: Kunkun Xu <xukunkun1@huawei.com> Signed-off-by: lizhe <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2 |
|
#
a68005a3 |
| 08-Jun-2020 |
Zhe Li <lizhe67@huawei.com> |
jffs2: fix jffs2 mounting failure
Thanks for the advice mentioned in the email. This is my v3 patch for this problem.
Mounting jffs2 on nand flash will get message "failed: I/O error" with the step
jffs2: fix jffs2 mounting failure
Thanks for the advice mentioned in the email. This is my v3 patch for this problem.
Mounting jffs2 on nand flash will get message "failed: I/O error" with the steps listed below. 1.umount jffs2 2.erase nand flash 3.mount jffs2 on it (this mounting operation will be successful) 4.do chown or chmod to the mount point directory 5.umount jffs2 6.mount jffs2 on nand flash After step 6, we will get message "mount ... failed: I/O error".
Typical image of this problem is like: Empty space found from 0x00000000 to 0x008a0000 Inode node at xx, totlen 0x00000044, #ino 1, version 1, isize 0...
The reason for this mounting failure is that at the end of function jffs2_scan_medium(), jffs2 will check the used_size and some info of nr_blocks.If conditions are met, it will return -EIO.
The detail is that, in the steps listed above, step 4 will write jffs2_raw_inode into flash without jffs2_raw_dirent, which will cause that there are some jffs2_raw_inode but no jffs2_raw_dirent on flash. This will meet the condition at the end of function jffs2_scan_medium() and return -EIO if we umount jffs2 and mount it again.
We notice that jffs2 add the value of c->unchecked_size if we find an inode node while mounting. And jffs2 will never add the value of c->unchecked_size in other situations. So this patch add one more condition about c->unchecked_size of the judgement to fix this problem.
Signed-off-by: Zhe Li <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
Revision tags: v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10 |
|
#
6a379f67 |
| 19-Aug-2019 |
Wenwen Wang <wenwen@cs.uga.edu> |
jffs2: Fix memory leak in jffs2_scan_eraseblock() error path
In jffs2_scan_eraseblock(), 'sumptr' is allocated through kmalloc() if 'sumlen' is larger than 'buf_size'. However, it is not deallocated
jffs2: Fix memory leak in jffs2_scan_eraseblock() error path
In jffs2_scan_eraseblock(), 'sumptr' is allocated through kmalloc() if 'sumlen' is larger than 'buf_size'. However, it is not deallocated in the following execution if jffs2_fill_scan_buf() fails, leading to a memory leak bug. To fix this issue, free 'sumptr' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Richard Weinberger <richard@nod.at>
show more ...
|
Revision tags: v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14 |
|
#
8387ff25 |
| 10-Jun-2016 |
Linus Torvalds <torvalds@linux-foundation.org> |
vfs: make the string hashes salt the hash
We always mixed in the parent pointer into the dentry name hash, but we did it late at lookup time. It turns out that we can simplify that lookup-time acti
vfs: make the string hashes salt the hash
We always mixed in the parent pointer into the dentry name hash, but we did it late at lookup time. It turns out that we can simplify that lookup-time action by salting the hash with the parent pointer early instead of late.
A few other users of our string hashes also wanted to mix in their own pointers into the hash, and those are updated to use the same mechanism.
Hash users that don't have any particular initial salt can just use the NULL pointer as a no-salt.
Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1 |
|
#
164c2406 |
| 10-Feb-2015 |
Chen Jie <chenjie6@huawei.com> |
jffs2: fix handling of corrupted summary length
sm->offset maybe wrong but magic maybe right, the offset do not have CRC.
Badness at c00c7580 [verbose debug info unavailable] NIP: c00c7580 LR: c00c
jffs2: fix handling of corrupted summary length
sm->offset maybe wrong but magic maybe right, the offset do not have CRC.
Badness at c00c7580 [verbose debug info unavailable] NIP: c00c7580 LR: c00c718c CTR: 00000014 REGS: df07bb40 TRAP: 0700 Not tainted (2.6.34.13-WR4.3.0.0_standard) MSR: 00029000 <EE,ME,CE> CR: 22084f84 XER: 00000000 TASK = df84d6e0[908] 'mount' THREAD: df07a000 GPR00: 00000001 df07bbf0 df84d6e0 00000000 00000001 00000000 df07bb58 00000041 GPR08: 00000041 c0638860 00000000 00000010 22084f88 100636c8 df814ff8 00000000 GPR16: df84d6e0 dfa558cc c05adb90 00000048 c0452d30 00000000 000240d0 000040d0 GPR24: 00000014 c05ae734 c05be2e0 00000000 00000001 00000000 00000000 c05ae730 NIP [c00c7580] __alloc_pages_nodemask+0x4d0/0x638 LR [c00c718c] __alloc_pages_nodemask+0xdc/0x638 Call Trace: [df07bbf0] [c00c718c] __alloc_pages_nodemask+0xdc/0x638 (unreliable) [df07bc90] [c00c7708] __get_free_pages+0x20/0x48 [df07bca0] [c00f4a40] __kmalloc+0x15c/0x1ec [df07bcd0] [c01fc880] jffs2_scan_medium+0xa58/0x14d0 [df07bd70] [c01ff38c] jffs2_do_mount_fs+0x1f4/0x6b4 [df07bdb0] [c020144c] jffs2_do_fill_super+0xa8/0x260 [df07bdd0] [c020230c] jffs2_fill_super+0x104/0x184 [df07be00] [c0335814] get_sb_mtd_aux+0x9c/0xec [df07be20] [c033596c] get_sb_mtd+0x84/0x1e8 [df07be60] [c0201ed0] jffs2_get_sb+0x1c/0x2c [df07be70] [c0103898] vfs_kern_mount+0x78/0x1e8 [df07bea0] [c0103a58] do_kern_mount+0x40/0x100 [df07bec0] [c011fe90] do_mount+0x240/0x890 [df07bf10] [c0120570] sys_mount+0x90/0xd8 [df07bf40] [c00110d8] ret_from_syscall+0x0/0x4
=== Exception: c01 at 0xff61a34 LR = 0x100135f0 Instruction dump: 38800005 38600000 48010f41 4bfffe1c 4bfc2d15 4bfffe8c 72e90200 4082fc28 3d20c064 39298860 8809000d 68000001 <0f000000> 2f800000 419efc0c 38000001 mount: mounting /dev/mtdblock3 on /common failed: Input/output error
Signed-off-by: Chen Jie <chenjie6@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
Revision tags: v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4 |
|
#
5a528957 |
| 15-Feb-2012 |
Joe Perches <joe@perches.com> |
jffs2: Use pr_fmt and remove jffs: from formats
Use pr_fmt to prefix KBUILD_MODNAME to appropriate logging messages.
Remove now unnecessary internal prefixes from formats.
Signed-off-by: Joe Perch
jffs2: Use pr_fmt and remove jffs: from formats
Use pr_fmt to prefix KBUILD_MODNAME to appropriate logging messages.
Remove now unnecessary internal prefixes from formats.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
#
da320f05 |
| 15-Feb-2012 |
Joe Perches <joe@perches.com> |
jffs2: Convert printks to pr_<level>
Use the more current logging style.
Coalesce formats, align arguments. Convert uses of embedded function names to %s, __func__.
A couple of long line checkpatc
jffs2: Convert printks to pr_<level>
Use the more current logging style.
Coalesce formats, align arguments. Convert uses of embedded function names to %s, __func__.
A couple of long line checkpatch errors I don't care about exist.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
#
9c261b33 |
| 15-Feb-2012 |
Joe Perches <joe@perches.com> |
jffs2: Convert most D1/D2 macros to jffs2_dbg
D1 and D2 macros are mostly uses to emit debugging messages.
Convert the logging uses of D1 & D2 to jffs2_dbg(level, fmt, ...) to be a bit more consist
jffs2: Convert most D1/D2 macros to jffs2_dbg
D1 and D2 macros are mostly uses to emit debugging messages.
Convert the logging uses of D1 & D2 to jffs2_dbg(level, fmt, ...) to be a bit more consistent style with the rest of the kernel.
All jffs2_dbg output is now at KERN_DEBUG where some of the previous uses were emitted at various KERN_<LEVEL>s.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
Revision tags: v3.3-rc3, v3.3-rc2 |
|
#
3e341740 |
| 27-Jan-2012 |
Masanari Iida <standby24x7@gmail.com> |
jffs2: fix typo in scan.c
Correct spelling "scaning" to scanning" in fs/jffs2/scan.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.int
jffs2: fix typo in scan.c
Correct spelling "scaning" to scanning" in fs/jffs2/scan.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
#
f0265450 |
| 30-Jan-2012 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
jffs2: remove direct mtd->point reference
Commit 10934478e44d9a5a7b16dadd89094fb608cf101e did not remove now useless "if (mtd->point)" check mistakingly - let's kill it now.
Signed-off-by: Artem Bi
jffs2: remove direct mtd->point reference
Commit 10934478e44d9a5a7b16dadd89094fb608cf101e did not remove now useless "if (mtd->point)" check mistakingly - let's kill it now.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
Revision tags: v3.3-rc1, v3.2 |
|
#
10934478 |
| 28-Dec-2011 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: do use mtd->point directly
Remove direct usage of the "mtd->point" function pointer. Instead, test the mtd_point() return code for '-EOPNOTSUPP'.
Signed-off-by: Artem Bityutskiy <artem.bityuts
mtd: do use mtd->point directly
Remove direct usage of the "mtd->point" function pointer. Instead, test the mtd_point() return code for '-EOPNOTSUPP'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
Revision tags: v3.2-rc7 |
|
#
7086c19d |
| 23-Dec-2011 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: introduce mtd_block_isbad interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
#
7219778a |
| 23-Dec-2011 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: introduce mtd_unpoint interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
#
d35ea200 |
| 23-Dec-2011 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: introduce mtd_point interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
Revision tags: v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3 |
|
#
e8a0e412 |
| 13-Jun-2011 |
Jesper Juhl <jj@chaosbits.net> |
jffs2: Avoid unneeded 'if' before kfree
kfree() deals gracefully with NULL pointers, so it's pointless to test for one prior to calling it. This removes such a test from jffs2_scan_medium().
Signed
jffs2: Avoid unneeded 'if' before kfree
kfree() deals gracefully with NULL pointers, so it's pointless to test for one prior to calling it. This removes such a test from jffs2_scan_medium().
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
show more ...
|
Revision tags: v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3 |
|
#
1ddd0d9a |
| 08-Apr-2011 |
Grant Erickson <marathon96@gmail.com> |
JFFS2: retry large buffer allocations
Replace direct call to kmalloc for a potentially large, contiguous buffer allocation with one to mtd_kmalloc_up_to which helps ensure the operation can succeed
JFFS2: retry large buffer allocations
Replace direct call to kmalloc for a potentially large, contiguous buffer allocation with one to mtd_kmalloc_up_to which helps ensure the operation can succeed under low-memory, highly- fragmented situations albeit somewhat more slowly.
Signed-off-by: Grant Erickson <marathon96@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
Revision tags: v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8 |
|
#
41bdc602 |
| 07-Oct-2010 |
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
jffs2: Reduce excessive scan of empty blocks
Scanning 1024 bytes to see if an EB is empty is a bit much. Lower it to 256 bytes and make sure the while loop is optimized.
Signed-off-by: Joakim Tjern
jffs2: Reduce excessive scan of empty blocks
Scanning 1024 bytes to see if an EB is empty is a bit much. Lower it to 256 bytes and make sure the while loop is optimized.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
Revision tags: v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1 |
|
#
ae3b6ba0 |
| 19-May-2010 |
David Woodhouse <David.Woodhouse@intel.com> |
jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases
This is now done in a GC pass; we don't need to trigger kupdated to do it.
Signed-off-by: David Woodhouse <David.Woodhouse@intel
jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases
This is now done in a GC pass; we don't need to trigger kupdated to do it.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
Revision tags: v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1 |
|
#
48396413 |
| 22-Jun-2009 |
David Woodhouse <David.Woodhouse@intel.com> |
jffs2: fix another potential leak on error path in scan.c
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
#
a2ab0ce0 |
| 13-Jun-2009 |
Christian Engelmayer <christian.engelmayer@frequentis.com> |
jffs2: leaking jffs2_summary in function jffs2_scan_medium
In case of an error returned by file_dirty() 's' is not freed as the cleanup path is skipped.
Reported by Coverity.
Signed-off-by: Christ
jffs2: leaking jffs2_summary in function jffs2_scan_medium
In case of an error returned by file_dirty() 's' is not freed as the cleanup path is skipped.
Reported by Coverity.
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
show more ...
|
Revision tags: v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2, v2.6.27-rc1, v2.6.26, v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3, v2.6.26-rc2, v2.6.26-rc1 |
|
#
a98889f3 |
| 30-Apr-2008 |
Jared Hulbert <jaredeh@gmail.com> |
[MTD][NOR] Add physical address to point() method
Adding the ability to get a physical address from point() in addition to virtual address. This physical address is required for XIP of userspace co
[MTD][NOR] Add physical address to point() method
Adding the ability to get a physical address from point() in addition to virtual address. This physical address is required for XIP of userspace code from flash.
Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Reviewed-by: Jörn Engel <joern@logfs.org> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
show more ...
|
#
27c72b04 |
| 01-May-2008 |
David Woodhouse <dwmw2@infradead.org> |
[JFFS2] Track parent inode for directories (for NFS export)
To support NFS export, we need to know the parent inode of directories. Rather than growing the jffs2_inode_cache structure, share space w
[JFFS2] Track parent inode for directories (for NFS export)
To support NFS export, we need to know the parent inode of directories. Rather than growing the jffs2_inode_cache structure, share space with the nlink field -- which was always set to 1 for directories anyway.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
show more ...
|