[JFFS2] add cond_resched() when garbage collecting deletion dirent

We observe soft lockups when doing heavy test which creates
directory with a lot of direntries and deletes them. This

[JFFS2] add cond_resched() when garbage collecting deletion dirent

We observe soft lockups when doing heavy test which creates
directory with a lot of direntries and deletes them. This
cycle is the reason fo this. Make it nicer and add cond_resched()
inside of it.

Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2][XATTR] Fix memory leak with jffs2_xattr_ref

If xattr_ref is associated with an orphan inode_cache
on filesystem mounting, those xattr_refs are not
released even if this inode

[JFFS2][XATTR] Fix memory leak with jffs2_xattr_ref

If xattr_ref is associated with an orphan inode_cache
on filesystem mounting, those xattr_refs are not
released even if this inode_cache is released.

This patch enables to call jffs2_xattr_delete_inode()
for such a irregular inode_cachde too.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion

- When xdatum is removed, a new xdatum with 'delete marker' is
written. (version==0xffffffff means 'delete marker')
-

[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion

- When xdatum is removed, a new xdatum with 'delete marker' is
written. (version==0xffffffff means 'delete marker')
- When xref is removed, a new xref with 'delete marker' is written.
(odd-numbered xseqno means 'delete marker')

- delete_xattr_(datum/xref)_delay() are new deletion functions
are added. We can only use them if we can detect the target
obsolete xdatum/xref as a orphan or errir one.
(e.g when inode deletion, or detecting crc error)

[1/3] jffs2-xattr-v6-01-delete_marker.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2] Introduce ref_next() macro for finding next physical node

Another part of the preparation for switching to an array...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

[JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.

As the first step towards eliminating the ref->next_phys member and saving
memory by using an _array_ of struct j

[JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.

As the first step towards eliminating the ref->next_phys member and saving
memory by using an _array_ of struct jffs2_raw_node_ref per eraseblock,
stop the write functions from allocating their own refs; have them just
_reserve_ the appropriate number instead. Then jffs2_link_node_ref() can
just fill them in.

Use a linked list of pre-allocated refs in the superblock, for now. Once
we switch to an array, it'll just be a case of extending that array.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2] Remove flash offset argument from various functions.

We don't need the upper layers to deal with the physical offset. It's
_always_ c->nextblock->offset + c->sector_size - c->nex

[JFFS2] Remove flash offset argument from various functions.

We don't need the upper layers to deal with the physical offset. It's
_always_ c->nextblock->offset + c->sector_size - c->nextblock->free_size
so we might as well just let the actual write functions deal with that.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2] Extend jffs2_link_node_ref() to link into per-inode list too.

Let's avoid the potential for forgetting to set ref->next_in_ino, by doing
it within jffs2_link_node_ref() instead.

[JFFS2] Extend jffs2_link_node_ref() to link into per-inode list too.

Let's avoid the potential for forgetting to set ref->next_in_ino, by doing
it within jffs2_link_node_ref() instead.

This highlights the ugliness of what we're currently doing with
xattr_datum and xattr_ref structures -- we should find a nicer way of
dealing with that.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2] Add length argument to jffs2_add_physical_node_ref()

If __totlen is going away, we need to pass the length in separately.
Also stop callers from needlessly setting ref->next_phys

[JFFS2] Add length argument to jffs2_add_physical_node_ref()

If __totlen is going away, we need to pass the length in separately.
Also stop callers from needlessly setting ref->next_phys to NULL,
since that's done for them... and since that'll also be going away soon.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.

We should preserve these when we come to garbage collect them, not let
them get erased. Use jffs2_garbage_collect_pristine(

[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.

We should preserve these when we come to garbage collect them, not let
them get erased. Use jffs2_garbage_collect_pristine() for this, and make
sure the summary code copes -- just refrain from writing a summary for any
block which contains a node we don't understand.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

Merge git://git.infradead.org/jffs2-xattr-2.6

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

[JFFS2] Support new device nodes

Device node major/minor numbers are just stored in the payload of a single
data node. Just extend that to 4 bytes and use new_encode_dev() for it.

[JFFS2] Support new device nodes

Device node major/minor numbers are just stored in the payload of a single
data node. Just extend that to 4 bytes and use new_encode_dev() for it.

We only use the 4-byte format if we _need_ to, if !old_valid_dev(foo).
This preserves backwards compatibility with older code as much as
possible. If we do make devices with major or minor numbers above 255, and
then mount the file system with the old code, it'll just read the first
two bytes and get the numbers wrong. If it comes to garbage-collect it,
it'll then write back those wrong numbers. But that's about the best we
can expect.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2][XATTR] Remove jffs2_garbage_collect_xattr(c, ic)

Remove jffs2_garbage_collect_xattr(c, ic).
jffs2_garbage_collect_xattr_datum/ref() are called from gc.c directly.

In ori

[JFFS2][XATTR] Remove jffs2_garbage_collect_xattr(c, ic)

Remove jffs2_garbage_collect_xattr(c, ic).
jffs2_garbage_collect_xattr_datum/ref() are called from gc.c directly.

In original implementation, jffs2_garbage_collect_xattr(c, ic) returns
with holding a spinlock if 'ic' is inode_cache. But it returns after
releasing a spinlock if 'ic' is xattr_datum/ref.
It looks so confusable behavior. Thus, this patch makes caller manage
locking/unlocking.

[5/10] jffs2-xattr-v5.1-05-update_xattr_gc.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>

show more ...

[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)

This attached patches provide xattr support including POSIX-ACL and
SELinux support on JFFS2 (version.5).

There are some signi

[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)

This attached patches provide xattr support including POSIX-ACL and
SELinux support on JFFS2 (version.5).

There are some significant differences from previous version posted
at last December.
The biggest change is addition of EBS(Erase Block Summary) support.
Currently, both kernel and usermode utility (sumtool) can recognize
xattr nodes which have JFFS2_NODETYPE_XATTR/_XREF nodetype.

In addition, some bugs are fixed.
- A potential race condition was fixed.
- Unexpected fail when updating a xattr by same name/value pair was fixed.
- A bug when removing xattr name/value pair was fixed.

The fundamental structures (such as using two new nodetypes and exclusion
mechanism by rwsem) are unchanged. But most of implementation were reviewed
and updated if necessary.
Espacially, we had to change several internal implementations related to
load_xattr_datum() to avoid a potential race condition.

[1/2] xattr_on_jffs2.kernel.version-5.patch
[2/2] xattr_on_jffs2.utils.version-5.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2] Fix race in post-mount node checking

For a while now, we've postponed CRC-checking of data nodes to be done
by the GC thread, instead of being done while the user is waiting for

[JFFS2] Fix race in post-mount node checking

For a while now, we've postponed CRC-checking of data nodes to be done
by the GC thread, instead of being done while the user is waiting for
mount to finish. The GC thread would iterate through all the inodes on
the system and check each of their data nodes. It would skip over inodes
which had already been used or were already being read in by
read_inode(), because their data nodes would have been examined anyway.

However, we could sometimes reach the end of the for-each-inode loop and
still have some unchecked space left, if an inode we'd skipped was
_still_ in the process of being read. This fixes that race by actually
waiting for read_inode() to finish rather than just moving on.

Thanks to Ladislav Michl for coming up with a reproducible test case and
helping to track it down.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

show more ...

[JFFS2] Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Add erase block summary support (mount time improvement)

The goal of summary is to speed up the mount time. Erase block summary (EBS)
stores summary information at the end of eve

[JFFS2] Add erase block summary support (mount time improvement)

The goal of summary is to speed up the mount time. Erase block summary (EBS)
stores summary information at the end of every (closed) erase block. It is
no longer necessary to scan all nodes separetly (and read all pages of them)
just read this "small" summary, where every information is stored which is
needed at mount time.

This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During
the mount process if there is no summary info the orignal scan process will
be executed. EBS works with NAND and NOR flashes, too.

There is a user space tool called sumtool to generate this summary
information for a JFFS2 image.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

[JFFS2] Fix JFFS2 [mc]time handling

From: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@

[JFFS2] Fix JFFS2 [mc]time handling

From: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

[JFFS2] Debug code clean up - step 3

Various simplifiactions. printk format corrections.
Convert more code to use the new debug functions.

Signed-off-by: Artem B. Bityutskiy <de

[JFFS2] Debug code clean up - step 3

Various simplifiactions. printk format corrections.
Convert more code to use the new debug functions.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

[JFFS2] Debug code clean up - step 2

If debugging is disabled, define debugging functions as empty macros, instead
of using Dx() explicitly.

Signed-off-by: Artem B. Bityutskiy <

[JFFS2] Debug code clean up - step 2

If debugging is disabled, define debugging functions as empty macros, instead
of using Dx() explicitly.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

[JFFS2] Debug code clean up - step 1

Move debug functions into a seperate source file

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner

[JFFS2] Debug code clean up - step 1

Move debug functions into a seperate source file

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

[JFFS2] Fix race in garbage collector

Fix the race problem described here:
http://lists.infradead.org/pipermail/linux-mtd/2005-April/012361.html

Signed-off-by: Artem B. Bityucki

[JFFS2] Fix race in garbage collector

Fix the race problem described here:
http://lists.infradead.org/pipermail/linux-mtd/2005-April/012361.html

Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

[JFFS2] Prevent deadlock when flushing write buffer

Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Improve garbage collector block selection

Make sure the erase_pending_wbuf_list's blocks are taken into account
when picking the block to GC.

Signed-off-by: Artem B. Bit

[JFFS2] Improve garbage collector block selection

Make sure the erase_pending_wbuf_list's blocks are taken into account
when picking the block to GC.

Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

[JFFS2] Core changes required to support JFFS2-on-Dataflash devices.

DataFlash page-sizes are not a power of two (they're multiples of 528
bytes). There are a few places in JFFS2 code w

[JFFS2] Core changes required to support JFFS2-on-Dataflash devices.

DataFlash page-sizes are not a power of two (they're multiples of 528
bytes). There are a few places in JFFS2 code where sector_size is used
as a bitmask. A new macro (SECTOR_ADDR) was defined to calculate these
sector addresses. For non-DataFlash devices, the original (faster)
bitmask operation is still used.

In scan.c, the EMPTY_SCAN_SIZE was a constant of 1024.
Since this could be larger than the sector size of the DataFlash, this
is now basically set to MIN(sector_size, 1024).

Addition of a jffs2_is_writebuffered() macro.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...