fuse_dev_ioctl(): switch to fdget()

Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

fuse: fix all W=1 kernel-doc warnings

Use correct function name in kernel-doc notation. (1)
Don't use "/**" to begin non-kernel-doc comments. (3)

Fixes these warnings:

fs/fuse/cuse.c:272: warning:

fuse: fix all W=1 kernel-doc warnings

Use correct function name in kernel-doc notation. (1)
Don't use "/**" to begin non-kernel-doc comments. (3)

Fixes these warnings:

fs/fuse/cuse.c:272: warning: expecting prototype for cuse_parse_dev_info(). Prototype was for cuse_parse_devinfo() instead
fs/fuse/dev.c:212: warning: expecting prototype for A new request is available, wake fiq(). Prototype was for fuse_dev_wake_and_unlock() instead
fs/fuse/dir.c:149: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Mark the attributes as stale due to an atime change. Avoid the invalidate if
fs/fuse/file.c:656: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* In case of short read, the caller sets 'pos' to the position of

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: add request extension

Will need to add supplementary groups to create messages, so add the
general concept of a request extension. A request extension is appended to
the end of the main reque

fuse: add request extension

Will need to add supplementary groups to create messages, so add the
general concept of a request extension. A request extension is appended to
the end of the main request. It has a header indicating the size and type
of the extension.

The create security context (fuse_secctx_*) is similar to the generic
request extension, so include that as well in a backward compatible manner.

Add the total extension length to the request header. The offset of the
extension block within the request can be calculated by:

inh->len - inh->total_extlen * 8

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: convert fuse_try_move_page() to use folios

Converts the function to try to move folios instead of pages. Also
converts fuse_check_page() to fuse_get_folio() since this is its only
caller. This

fuse: convert fuse_try_move_page() to use folios

Converts the function to try to move folios instead of pages. Also
converts fuse_check_page() to fuse_get_folio() since this is its only
caller. This change removes 15 calls to compound_head().

Link: https://lkml.kernel.org/r/20221101175326.13265-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

filemap: convert replace_page_cache_page() to replace_page_cache_folio()

Patch series "Removing the lru_cache_add() wrapper".

This patchset replaces all calls of lru_cache_add() with the folio
equi

filemap: convert replace_page_cache_page() to replace_page_cache_folio()

Patch series "Removing the lru_cache_add() wrapper".

This patchset replaces all calls of lru_cache_add() with the folio
equivalent: folio_add_lru(). This is allows us to get rid of the wrapper
The series passes xfstests and the userfaultfd selftests.


This patch (of 5):

Eliminates 7 calls to compound_head().

Link: https://lkml.kernel.org/r/20221101175326.13265-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20221101175326.13265-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

fuse: Remove user_ns check for FUSE_DEV_IOC_CLONE

Commit 8ed1f0e22f49e ("fs/fuse: fix ioctl type confusion") fixed a type
confusion bug by adding an ->f_op comparison.

Based on some off-list discus

fuse: Remove user_ns check for FUSE_DEV_IOC_CLONE

Commit 8ed1f0e22f49e ("fs/fuse: fix ioctl type confusion") fixed a type
confusion bug by adding an ->f_op comparison.

Based on some off-list discussion back then, another check was added to
compare the f_cred->user_ns. This is not for security reasons, but was
based on the idea that a FUSE device FD should be using the UID/GID
mappings of its f_cred->user_ns, and those translations are done using
fc->user_ns, which matches the f_cred->user_ns of the initial FUSE device
FD thanks to the check in fuse_fill_super(). See also commit 8cb08329b0809
("fuse: Support fuse filesystems outside of init_user_ns").

But FUSE_DEV_IOC_CLONE is, at a higher level, a *cloning* operation that
copies an existing context (with a weird API that involves first opening
/dev/fuse, then tying the resulting new FUSE device FD to an existing FUSE
instance). So if an application is already passing FUSE FDs across userns
boundaries and dealing with the resulting ID mapping complications somehow,
it doesn't make much sense to block this cloning operation.

I've heard that this check is an obstacle for some folks, and I don't see a
good reason to keep it, so remove it.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY

Add a flag to entry expiration that lets the filesystem expire a dentry
without kicking it out from the cache immediately.

This makes a diffe

fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY

Add a flag to entry expiration that lets the filesystem expire a dentry
without kicking it out from the cache immediately.

This makes a difference for overmounted dentries, where plain invalidation
would detach all submounts before dropping the dentry from the cache. If
only expiry is set on the dentry, then any overmounts are left alone and
until ->d_revalidate() is called.

Note: ->d_revalidate() is not called for the case of following a submount,
so invalidation will only be triggered for the non-overmounted case. The
dentry could also be mounted in a different mount instance, in which case
any submounts will still be detached.

Suggested-by: Jakob Blomer <jblomer@cern.ch>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

mm: multi-gen LRU: groundwork

Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they

mm: multi-gen LRU: groundwork

Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.

Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.

There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations. They form a closed-loop system, i.e., "the page reclaim".
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim. These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].

To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.

The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
applications usually do not prepare themselves for major page
faults like they do for blocked I/O. E.g., GUI applications
commonly use dedicated I/O threads to avoid blocking rendering
threads.

There are also two access patterns: one with temporal locality and the
other without. For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].

The next patch will address the "outlying refaults". Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.

A page is added to the youngest generation on faulting. The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction. The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then. This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.

[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/

Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()

Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.

Provide inline wrapp

iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()

Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.

Provide inline wrappers doing that, convert trivial open-coded
uses of those.

BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

new iov_iter flavour - ITER_UBUF

Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.

We are going to expose t

new iov_iter flavour - ITER_UBUF

Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.

We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.

New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.

DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

fuse: remove reliance on bdi congestion

The bdi congestion tracking in not widely used and will be removed.

Fuse is one of a small number of filesystems that uses it, setting both
the sync (read) a

fuse: remove reliance on bdi congestion

The bdi congestion tracking in not widely used and will be removed.

Fuse is one of a small number of filesystems that uses it, setting both
the sync (read) and async (write) congestion flags at what it determines
are appropriate times.

The only remaining effect of the sync flag is to cause read-ahead to be
skipped. The only remaining effect of the async flag is to cause (some)
WB_SYNC_NONE writes to be skipped.

So instead of setting the flags, change:

- .readahead to stop when it has submitted all non-async pages for
read.

- .writepages to do nothing if WB_SYNC_NONE and the flag would be set

- .writepage to return AOP_WRITEPAGE_ACTIVATE if WB_SYNC_NONE and the
flag would be set.

The writepages change causes a behavioural change in that pageout() can
now return PAGE_ACTIVATE instead of PAGE_KEEP, so SetPageActive() will be
called on the page which (I think) will further delay the next attempt at
writeout. This might be a good thing.

Link: https://lkml.kernel.org/r/164549983737.9187.2627117501000365074.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

fuse: fix pipe buffer lifetime for direct_io

In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffe

fuse: fix pipe buffer lifetime for direct_io

In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.

On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.

This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.

Fix by copying pages coming from the user address space to new pipe
buffers.

Reported-by: Jann Horn <jannh@google.com>
Fixes: c3021629a0d8 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: release pipe buf after last use

Checking buf->flags should be done before the pipe_buf_release() is called
on the pipe buffer, since releasing the buffer might modify the flags.

This is exact

fuse: release pipe buf after last use

Checking buf->flags should be done before the pipe_buf_release() is called
on the pipe buffer, since releasing the buffer might modify the flags.

This is exactly what page_cache_pipe_buf_release() does, and which results
in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was
trying to fix.

Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Fixes: 712a951025c0 ("fuse: fix page stealing")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: fix page stealing

It is possible to trigger a crash by splicing anon pipe bufs to the fuse
device.

The reason for this is that anon_pipe_buf_release() will reuse buf->page if
the refcount is

fuse: fix page stealing

It is possible to trigger a crash by splicing anon pipe bufs to the fuse
device.

The reason for this is that anon_pipe_buf_release() will reuse buf->page if
the refcount is 1, but that page might have already been stolen and its
flags modified (e.g. PG_lru added).

This happens in the unlikely case of fuse_dev_splice_write() getting around
to calling pipe_buf_release() after a page has been stolen, added to the
page cache and removed from the page cache.

Fix by calling pipe_buf_release() right after the page was inserted into
the page cache. In this case the page has an elevated refcount so any
release function will know that the page isn't reusable.

Reported-by: Frank Dinoff <fdinoff@google.com>
Link: https://lore.kernel.org/r/CAAmZXrsGg2xsP1CK+cbuEMumtrqdvD-NKnWzhNcvn71RV3c1yw@mail.gmail.com/
Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: always invalidate attributes after writes

Extend the fuse_write_update_attr() helper to invalidate cached attributes
after a write.

This has already been done in all cases except in fuse_noti

fuse: always invalidate attributes after writes

Extend the fuse_write_update_attr() helper to invalidate cached attributes
after a write.

This has already been done in all cases except in fuse_notify_store(), so
this is mostly a cleanup.

fuse_direct_write_iter() calls fuse_direct_IO() which already calls
fuse_write_update_attr(), so don't repeat that again in the former.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: rename fuse_write_update_size()

This function already updates the attr_version in fuse_inode, regardless of
whether the size was changed or not.

Rename the helper to fuse_write_update_attr()

fuse: rename fuse_write_update_size()

This function already updates the attr_version in fuse_inode, regardless of
whether the size was changed or not.

Rename the helper to fuse_write_update_attr() to reflect the more generic
nature.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: use kmap_local_page()

Due to the introduction of kmap_local_*, the storage of slots used for
short-term mapping has changed from per-CPU to per-thread. kmap_atomic()
disable preemption, while

fuse: use kmap_local_page()

Due to the introduction of kmap_local_*, the storage of slots used for
short-term mapping has changed from per-CPU to per-thread. kmap_atomic()
disable preemption, while kmap_local_*() only disable migration.

There is no need to disable preemption in several kamp_atomic places used
in fuse.

Link: https://lwn.net/Articles/836144/
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: fix pipe buffer lifetime for direct_io

commit 0c4bcfdecb1ac0967619ee7ff44871d93c08c909 upstream.

In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally

fuse: fix pipe buffer lifetime for direct_io

commit 0c4bcfdecb1ac0967619ee7ff44871d93c08c909 upstream.

In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.

On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.

This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.

Fix by copying pages coming from the user address space to new pipe
buffers.

Reported-by: Jann Horn <jannh@google.com>
Fixes: c3021629a0d8 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

fuse: release pipe buf after last use

commit 473441720c8616dfaf4451f9c7ea14f0eb5e5d65 upstream.

Checking buf->flags should be done before the pipe_buf_release() is called
on the pipe buffer, since

fuse: release pipe buf after last use

commit 473441720c8616dfaf4451f9c7ea14f0eb5e5d65 upstream.

Checking buf->flags should be done before the pipe_buf_release() is called
on the pipe buffer, since releasing the buffer might modify the flags.

This is exactly what page_cache_pipe_buf_release() does, and which results
in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was
trying to fix.

Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Fixes: 712a951025c0 ("fuse: fix page stealing")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

fuse: fix page stealing

commit 712a951025c0667ff00b25afc360f74e639dfabe upstream.

It is possible to trigger a crash by splicing anon pipe bufs to the fuse
device.

The reason for this is that anon_

fuse: fix page stealing

commit 712a951025c0667ff00b25afc360f74e639dfabe upstream.

It is possible to trigger a crash by splicing anon pipe bufs to the fuse
device.

The reason for this is that anon_pipe_buf_release() will reuse buf->page if
the refcount is 1, but that page might have already been stolen and its
flags modified (e.g. PG_lru added).

This happens in the unlikely case of fuse_dev_splice_write() getting around
to calling pipe_buf_release() after a page has been stolen, added to the
page cache and removed from the page cache.

Fix by calling pipe_buf_release() right after the page was inserted into
the page cache. In this case the page has an elevated refcount so any
release function will know that the page isn't reusable.

Reported-by: Frank Dinoff <fdinoff@google.com>
Link: https://lore.kernel.org/r/CAAmZXrsGg2xsP1CK+cbuEMumtrqdvD-NKnWzhNcvn71RV3c1yw@mail.gmail.com/
Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device")
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

fuse: fix use after free in fuse_read_interrupt()

There is a potential race between fuse_read_interrupt() and
fuse_request_end().

TASK1
in fuse_read_interrupt(): delete req->intr_entry (while hol

fuse: fix use after free in fuse_read_interrupt()

There is a potential race between fuse_read_interrupt() and
fuse_request_end().

TASK1
in fuse_read_interrupt(): delete req->intr_entry (while holding
fiq->lock)

TASK2
in fuse_request_end(): req->intr_entry is empty -> skip fiq->lock
wake up TASK3

TASK3
request is freed

TASK1
in fuse_read_interrupt(): dereference req->in.h.unique ***BAM***


Fix by always grabbing fiq->lock if the request was ever interrupted
(FR_INTERRUPTED set) thereby serializing with concurrent
fuse_read_interrupt() calls.

FR_INTERRUPTED is set before the request is queued on fiq->interrupts.
Dequeing the request is done with list_del_init() but FR_INTERRUPTED is not
cleared in this case.

Reported-by: lijiazi <lijiazi@xiaomi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

virtiofs: Fix spelling mistakes

Fix some spelling mistakes in comments:
refernce ==> reference
happnes ==> happens
threhold ==> threshold
splitted ==> split
mached ==> matched

Signed-off-by: Z

virtiofs: Fix spelling mistakes

Fix some spelling mistakes in comments:
refernce ==> reference
happnes ==> happens
threhold ==> threshold
splitted ==> split
mached ==> matched

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: reject internal errno

Don't allow userspace to report errors that could be kernel-internal.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: 334f485df85a ("[PATCH] FUSE -

fuse: reject internal errno

Don't allow userspace to report errors that could be kernel-internal.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: 334f485df85a ("[PATCH] FUSE - device functions")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: check connected before queueing on fpq->io

A request could end up on the fpq->io list after fuse_abort_conn() has
reset fpq->connected and aborted requests on that list:

Thread-1 Thread-2

fuse: check connected before queueing on fpq->io

A request could end up on the fpq->io list after fuse_abort_conn() has
reset fpq->connected and aborted requests on that list:

Thread-1 Thread-2
======== ========
->fuse_simple_request() ->shutdown
->__fuse_request_send()
->queue_request() ->fuse_abort_conn()
->fuse_dev_do_read() ->acquire(fpq->lock)
->wait_for(fpq->lock) ->set err to all req's in fpq->io
->release(fpq->lock)
->acquire(fpq->lock)
->add req to fpq->io

After the userspace copy is done the request will be ended, but
req->out.h.error will remain uninitialized. Also the copy might block
despite being already aborted.

Fix both issues by not allowing the request to be queued on the fpq->io
list after fuse_abort_conn() has processed this list.

Reported-by: Pradeep P V K <pragalla@codeaurora.org>
Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: ignore PG_workingset after stealing

Fix the "fuse: trying to steal weird page" warning.

Description from Johannes Weiner:

"Think of it as similar to PG_active. It's just another usage/heat

fuse: ignore PG_workingset after stealing

Fix the "fuse: trying to steal weird page" warning.

Description from Johannes Weiner:

"Think of it as similar to PG_active. It's just another usage/heat
indicator of file and anon pages on the reclaim LRU that, unlike
PG_active, persists across deactivation and even reclaim (we store it in
the page cache / swapper cache tree until the page refaults).

So if fuse accepts pages that can legally have PG_active set,
PG_workingset is fine too."

Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Fixes: 1899ad18c607 ("mm: workingset: tell cache transitions from workingset thrashing")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...