ext4: make ext4_forced_shutdown() take struct super_block

Currently ext4_forced_shutdown() takes struct ext4_sb_info but most
callers need to get it from struct super_block anyway. So just pass in
s

ext4: make ext4_forced_shutdown() take struct super_block

Currently ext4_forced_shutdown() takes struct ext4_sb_info but most
callers need to get it from struct super_block anyway. So just pass in
struct super_block to save all callers from some boilerplate code. No
functional changes.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ext4: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

ext4: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-40-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

show more ...

ext4: fix to check return value of freeze_bdev() in ext4_shutdown()

freeze_bdev() can fail due to a lot of reasons, it needs to check its
reason before later process.

Fixes: 783d94854499 ("ext4: ad

ext4: fix to check return value of freeze_bdev() in ext4_shutdown()

freeze_bdev() can fail due to a lot of reasons, it needs to check its
reason before later process.

Fixes: 783d94854499 ("ext4: add EXT4_IOC_GOINGDOWN ioctl")
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230606073203.1310389-1-chao@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ext4: split ext4_shutdown

Split ext4_shutdown into a low-level helper that will be reused for
implementing the shutdown super operation and a wrapper for the ioctl
handling.

Signed-off-by: Christop

ext4: split ext4_shutdown

Split ext4_shutdown into a low-level helper that will be reused for
implementing the shutdown super operation and a wrapper for the ioctl
handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

ext4: zero i_disksize when initializing the bootloader inode

If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0.

ext4: zero i_disksize when initializing the bootloader inode

If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:

WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80

Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);

Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ext4: remove dead code in updating backup sb

ext4_update_backup_sb checks for err having some value
after unlocking buffer. But err has not been updated
till that point in any code which will lead e

ext4: remove dead code in updating backup sb

ext4_update_backup_sb checks for err having some value
after unlocking buffer. But err has not been updated
till that point in any code which will lead execution
of the code in question.

Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221230141858.3828-1-007047221b@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

fs: port inode_owner_or_capable() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This

fs: port inode_owner_or_capable() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

fs: port ->fileattr_set() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is

fs: port ->fileattr_set() to pass mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

ext4: initialize quota before expanding inode in setproject ioctl

Make sure we initialize quotas before possibly expanding inode space
(and thus maybe needing to allocate external xattr block) in
ex

ext4: initialize quota before expanding inode in setproject ioctl

Make sure we initialize quotas before possibly expanding inode space
(and thus maybe needing to allocate external xattr block) in
ext4_ioctl_setproject(). This prevents not accounting the necessary
block allocation.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221207115937.26601-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ext4: don't fail GETFSUUID when the caller provides a long buffer

If userspace provides a longer UUID buffer than is required, we
shouldn't fail the call with EINVAL -- rather, we can fill the calle

ext4: don't fail GETFSUUID when the caller provides a long buffer

If userspace provides a longer UUID buffer than is required, we
shouldn't fail the call with EINVAL -- rather, we can fill the caller's
buffer with the bytes we /can/ fill, and update the length field to
reflect what we copied. This doesn't break the UAPI since we're
enabling a case that currently fails, and so far Ted hasn't released a
version of e2fsprogs that uses the new ext4 ioctl.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Link: https://lore.kernel.org/r/166811139478.327006.13879198441587445544.stgit@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

show more ...

ext4: dont return EINVAL from GETFSUUID when reporting UUID length

If userspace calls this ioctl with fsu_length (the length of the
fsuuid.fsu_uuid array) set to zero, ext4 copies the desired uuid l

ext4: dont return EINVAL from GETFSUUID when reporting UUID length

If userspace calls this ioctl with fsu_length (the length of the
fsuuid.fsu_uuid array) set to zero, ext4 copies the desired uuid length
out to userspace. The kernel call returned a result from a valid input,
so the return value here should be zero, not EINVAL.

While we're at it, fix the copy_to_user call to make it clear that we're
only copying out fsu_len.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Link: https://lore.kernel.org/r/166811138914.327006.9241306894437166566.stgit@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

show more ...

ext4: fix bug_on in __es_tree_search caused by bad boot loader inode

We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_statu

ext4: fix bug_on in __es_tree_search caused by bad boot loader inode

We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_status.c:203!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349
RIP: 0010:ext4_es_end.isra.0+0x34/0x42
RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__es_tree_search.isra.0+0x6d/0xf5
ext4_es_cache_extent+0xfa/0x230
ext4_cache_extents+0xd2/0x110
ext4_find_extent+0x5d5/0x8c0
ext4_ext_map_blocks+0x9c/0x1d30
ext4_map_blocks+0x431/0xa50
ext4_mpage_readpages+0x48e/0xe40
ext4_readahead+0x47/0x50
read_pages+0x82/0x530
page_cache_ra_unbounded+0x199/0x2a0
do_page_cache_ra+0x47/0x70
page_cache_ra_order+0x242/0x400
ondemand_readahead+0x1e8/0x4b0
page_cache_sync_ra+0xf4/0x110
filemap_get_pages+0x131/0xb20
filemap_read+0xda/0x4b0
generic_file_read_iter+0x13a/0x250
ext4_file_read_iter+0x59/0x1d0
vfs_read+0x28f/0x460
ksys_read+0x73/0x160
__x64_sys_read+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

show more ...

ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode

There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, all

ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode

There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara)

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

show more ...

ext4: update the backup superblock's at the end of the online resize

When expanding a file system using online resize, various fields in
the superblock (e.g., s_blocks_count, s_inodes_count, etc.) c

ext4: update the backup superblock's at the end of the online resize

When expanding a file system using online resize, various fields in
the superblock (e.g., s_blocks_count, s_inodes_count, etc.) change.
To update the backup superblocks, the online resize uses the function
update_backups() in fs/ext4/resize.c. This function was not updating
the checksum field in the backup superblocks. This wasn't a big deal
previously, because e2fsck didn't care about the checksum field in the
backup superblock. (And indeed, update_backups() goes all the way
back to the ext3 days, well before we had support for metadata
checksums.)

However, there is an alternate, more general way of updating
superblock fields, ext4_update_primary_sb() in fs/ext4/ioctl.c. This
function does check the checksum of the backup superblock, and if it
doesn't match will mark the file system as corrupted. That was
clearly not the intent, so avoid to aborting the resize when a bad
superblock is found.

In addition, teach update_backups() to properly update the checksum in
the backup superblocks. We will eventually want to unify
updapte_backups() with the infrasture in ext4_update_primary_sb(), but
that's for another day.

Note: The problem has been around for a while; it just didn't really
matter until ext4_update_primary_sb() was added by commit bbc605cdb1e1
("ext4: implement support for get/set fs label"). And it became
trivially easy to reproduce after commit 827891a38acc ("ext4: update
the s_overhead_clusters in the backup sb's when resizing") in v6.0.

Cc: stable@kernel.org # 5.17+
Fixes: bbc605cdb1e1 ("ext4: implement support for get/set fs label")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

treewide: use get_random_u32() when possible

The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same cod

treewide: use get_random_u32() when possible

The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

show more ...

ext4: remove redundant checking in ext4_ioctl_checkpoint

It is already checked after comment "check for invalid bits set",
so let's remove this one.

Signed-off-by: Guoqing Jiang <guoqing.jiang@linu

ext4: remove redundant checking in ext4_ioctl_checkpoint

It is already checked after comment "check for invalid bits set",
so let's remove this one.

Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20220918115219.12407-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ext4: fix i_version handling in ext4

ext4 currently updates the i_version counter when the atime is updated
during a read. This is less than ideal as it can cause unnecessary cache
invalidations wit

ext4: fix i_version handling in ext4

ext4 currently updates the i_version counter when the atime is updated
during a read. This is less than ideal as it can cause unnecessary cache
invalidations with NFSv4 and unnecessary remeasurements for IMA.

The increment in ext4_mark_iloc_dirty is also problematic since it can
corrupt the i_version counter for ea_inodes. We aren't bumping the file
times in ext4_mark_iloc_dirty, so changing the i_version there seems
wrong, and is the cause of both problems.

Remove that callsite and add increments to the setattr, setxattr and
ioctl codepaths, at the same times that we update the ctime. The
i_version bump that already happens during timestamp updates should take
care of the rest.

In ext4_move_extents, increment the i_version on both inodes, and also
add in missing ctime updates.

[ Some minor updates since we've already enabled the i_version counter
unconditionally already via another patch series. -- TYT ]

Cc: stable@kernel.org
Cc: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20220908172448.208585-3-jlayton@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ext4: add ioctls to get/set the ext4 superblock uuid

This fixes a race between changing the ext4 superblock uuid and operations
like mounting, resizing, changing features, etc.

Reviewed-by: Theodor

ext4: add ioctls to get/set the ext4 superblock uuid

This fixes a race between changing the ext4 superblock uuid and operations
like mounting, resizing, changing features, etc.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jeremy Bongio <bongiojp@gmail.com>
Link: https://lore.kernel.org/r/20220721224422.438351-1-bongiojp@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ext4: update the s_overhead_clusters in the backup sb's when resizing

When the EXT4_IOC_RESIZE_FS ioctl is complete, update the backup
superblocks. We don't do this for the old-style resize ioctls

ext4: update the s_overhead_clusters in the backup sb's when resizing

When the EXT4_IOC_RESIZE_FS ioctl is complete, update the backup
superblocks. We don't do this for the old-style resize ioctls since
they are quite ancient, and only used by very old versions of
resize2fs --- and we don't want to update the backup superblocks every
time EXT4_IOC_GROUP_ADD is called, since it might get called a lot.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()

This patch move code for FS_IOC_GET_ENCRYPTION_PWSALT case into
ext4's crypto.c file, i.e. ext4_ioctl_get_encryption_pwsalt()
and uuid_is_z

ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()

This patch move code for FS_IOC_GET_ENCRYPTION_PWSALT case into
ext4's crypto.c file, i.e. ext4_ioctl_get_encryption_pwsalt()
and uuid_is_zero(). This is mostly refactoring logic and should
not affect any functionality change.

Suggested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5af98b17152a96b245b4f7d2dfb8607fc93e36aa.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

block: remove QUEUE_FLAG_DISCARD

Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.

The only places where needs special attention

block: remove QUEUE_FLAG_DISCARD

Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.

The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

ext4: update the cached overhead value in the superblock

If we (re-)calculate the file system overhead amount and it's
different from the on-disk s_overhead_clusters value, update the
on-disk versio

ext4: update the cached overhead value in the superblock

If we (re-)calculate the file system overhead amount and it's
different from the on-disk s_overhead_clusters value, update the
on-disk version since this can take potentially quite a while on
bigalloc file systems.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

show more ...

ext4: fix kernel doc warnings

Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fast commit may not fallback for ineligible commit

For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions

ext4: fast commit may not fallback for ineligible commit

For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions and mark FC_INELIGIBLE
4. jbd complete transaction n and clean FC_INELIGIBLE
5. task A call fsync

In this case fast commit will not fallback to full commit and
transaction n+1 also not handled by jbd.

Make ext4_fc_mark_ineligible() also record transaction tid for
latest ineligible case, when call ext4_fc_cleanup() check
current transaction tid, if small than latest ineligible tid
do not clear the EXT4_MF_FC_INELIGIBLE.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Suggested-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

show more ...

ext4: implement support for get/set fs label

Implement support for FS_IOC_GETFSLABEL and FS_IOC_SETFSLABEL ioctls for
online reading and setting of file system label.

ext4_ioctl_getlabel() is simpl

ext4: implement support for get/set fs label

Implement support for FS_IOC_GETFSLABEL and FS_IOC_SETFSLABEL ioctls for
online reading and setting of file system label.

ext4_ioctl_getlabel() is simple, just get the label from the primary
superblock. This might not be the first sb on the file system if
'sb=' mount option is used.

In ext4_ioctl_setlabel() we update what ext4 currently views as a
primary superblock and then proceed to update backup superblocks. There
are two caveats:
- the primary superblock might not be the first superblock and so it
might not be the one used by userspace tools if read directly
off the disk.
- because the primary superblock might not be the first superblock we
potentialy have to update it as part of backup superblock update.
However the first sb location is a bit more complicated than the rest
so we have to account for that.

The superblock modification is created generic enough so the
infrastructure can be used for other potential superblock modification
operations, such as chaning UUID.

Tested with generic/492 with various configurations. I also checked the
behavior with 'sb=' mount options, including very large file systems
with and without sparse_super/sparse_super2.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20211213135618.43303-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...