fs: use the super_block as holder when mounting file systems

The file system type is not a very useful holder as it doesn't allow us
to go back to the actual file system instance. Pass the super_bl

fs: use the super_block as holder when mounting file systems

The file system type is not a very useful holder as it doesn't allow us
to go back to the actual file system instance. Pass the super_block instead
which is useful when passed back to the file system driver.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-7-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>

show more ...

fs: open block device after superblock creation

Currently get_tree_bdev and mount_bdev open the block device before
committing to allocating a super block. That creates problems for
restricting the

fs: open block device after superblock creation

Currently get_tree_bdev and mount_bdev open the block device before
committing to allocating a super block. That creates problems for
restricting the number of writers to a device, and also leads to a
unusual and not very helpful holder (the fs_type).

Reorganize the super block code to first look whether the superblock for
a particular device does already exist and open the block device only if
it doesn't.

[hch: port to before the bdev_handle changes,
duplicate the bdev read-only check from blkdev_get_by_path,
extend the fsfree_mutex coverage to protect against freezes,
fix an open bdev leak when the bdev is frozen,
use the bdev local variable more,
rename the s variable to sb to be more descriptive]
[brauner: remove references to mounts as they're mostly irrelevant]
[brauner & hch: fold fixes for romfs and cramfs for
syzbot+2faac0423fdc9692822b@syzkaller.appspotmail.com]

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230724175145.201318-1-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>

show more ...

cramfs: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

cramfs: convert to ctime accessor functions

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-31-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

show more ...

splice: Use filemap_splice_read() instead of generic_file_splice_read()

Replace pointers to generic_file_splice_read() with calls to
filemap_splice_read().

Signed-off-by: David Howells <dhowells@re

splice: Use filemap_splice_read() instead of generic_file_splice_read()

Replace pointers to generic_file_splice_read() with calls to
filemap_splice_read().

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

fs/cramfs/inode.c: initialize file_ra_state

file_ra_state_init() assumes that the file_ra_state has been zeroed out.
Fixes a KMSAN used-unintialized issue (at least).

Fixes: cf948cbc35e80 ("cramfs

fs/cramfs/inode.c: initialize file_ra_state

file_ra_state_init() assumes that the file_ra_state has been zeroed out.
Fixes a KMSAN used-unintialized issue (at least).

Fixes: cf948cbc35e80 ("cramfs: read_mapping_page() is synchronous")
Reported-by: syzbot <syzbot+8ce7f8308d91e6b8bbe2@syzkaller.appspotmail.com>
Link: https://lkml.kernel.org/r/0000000000008f74e905f56df987@google.com
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: replace vma->vm_flags direct modifications with modifier calls

Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma loc

mm: replace vma->vm_flags direct modifications with modifier calls

Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.

[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm/nommu: factor out check for NOMMU shared mappings into is_nommu_shared_mapping()

Patch series "mm/nommu: don't use VM_MAYSHARE for MAP_PRIVATE mappings".

Trying to reduce the confusion around VM

mm/nommu: factor out check for NOMMU shared mappings into is_nommu_shared_mapping()

Patch series "mm/nommu: don't use VM_MAYSHARE for MAP_PRIVATE mappings".

Trying to reduce the confusion around VM_SHARED and VM_MAYSHARE first
requires !CONFIG_MMU to stop using VM_MAYSHARE for MAP_PRIVATE mappings.
CONFIG_MMU only sets VM_MAYSHARE for MAP_SHARED mappings.

This paves the way for further VM_MAYSHARE and VM_SHARED cleanups: for
example, renaming VM_MAYSHARED to VM_MAP_SHARED to make it cleaner what is
actually means.

Let's first get the weird case out of the way and not use VM_MAYSHARE in
MAP_PRIVATE mappings, using a new VM_MAYOVERLAY flag instead.


This patch (of 3):

We want to stop using VM_MAYSHARE in private mappings to pave the way for
clarifying the semantics of VM_MAYSHARE vs. VM_SHARED and reduce the
confusion. While CONFIG_MMU uses VM_MAYSHARE to represent MAP_SHARED,
!CONFIG_MMU also sets VM_MAYSHARE for selected R/O private file mappings
that are an effective overlay of a file mapping.

Let's factor out all relevant VM_MAYSHARE checks in !CONFIG_MMU code into
is_nommu_shared_mapping() first.

Note that whenever VM_SHARED is set, VM_MAYSHARE must be set as well
(unless there is a serious BUG). So there is not need to test for
VM_SHARED manually.

No functional change intended.

Link: https://lkml.kernel.org/r/20230102160856.500584-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230102160856.500584-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

fs/cramfs: Convert kmap() to kmap_local_data()

The use of kmap() is being deprecated in favor of kmap_local_page().

There are two main problems with kmap(): (1) It comes with an overhead as
the map

fs/cramfs: Convert kmap() to kmap_local_data()

The use of kmap() is being deprecated in favor of kmap_local_page().

There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.

With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.

Since its use in fs/cramfs is safe everywhere, it should be preferred.

Therefore, replace kmap() with kmap_local_page() in fs/cramfs. Instead
of open-coding kmap_local_page() + memcpy(), use memcpy_from_page().

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

cramfs: read_mapping_page() is synchronous

Since commit 67f9fd91f93c, the code to wait for the read to complete has
been dead. That commit wrongly stated that the read was synchronous
already; this

cramfs: read_mapping_page() is synchronous

Since commit 67f9fd91f93c, the code to wait for the read to complete has
been dead. That commit wrongly stated that the read was synchronous
already; this seems to have been a confusion about which ->readpage
operation was being called. Instead of reintroducing an asynchronous
version of read_mapping_page(), call the readahead code directly to
submit all reads first before waiting for them in read_mapping_page().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

show more ...

cramfs: Convert cramfs to read_folio

This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with

cramfs: Convert cramfs to read_folio

This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

show more ...

cramfs: use bdev_nr_bytes instead of open coding it

Use the proper helper to read the block device size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>

cramfs: use bdev_nr_bytes instead of open coding it

Use the proper helper to read the block device size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211018101130.1838532-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

cramfs: use %pD instead of messing with file_dentry()->d_name

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[PATCH] reduce boilerplate in fsid handling

Get rid of boilerplate in most of ->statfs()
instances...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

cramfs: switch to use of errofc() et.al.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

cramfs: fix usage on non-MTD device

When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.

Note: this relies upon cramfs_mtd_f

cramfs: fix usage on non-MTD device

When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.

Note: this relies upon cramfs_mtd_fill_super() leaving no side
effects on fc state in case of failure; in general, failing
get_tree_...() does *not* mean "fine to try again"; e.g. parsed
options might've been consumed by fill_super callback and freed
on failure.

Fixes: 74f78fc5ef43 ("vfs: Convert cramfs to use the new mount API")

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

vfs: Convert cramfs to use the new mount API

Convert the cramfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communicati

vfs: Convert cramfs to use the new mount API

Convert the cramfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.

See Documentation/filesystems/mount_api.txt for more information.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
cc: linux-mtd@lists.infradead.org
cc: linux-block@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

fs: Fill in max and min timestamps in superblock

Fill in the appropriate limits to avoid inconsistencies
in the vfs cached inode times when timestamps are
outside the permitted range.

Even though s

fs: Fill in max and min timestamps in superblock

Fill in the appropriate limits to avoid inconsistencies
in the vfs cached inode times when timestamps are
outside the permitted range.

Even though some filesystems are read-only, fill in the
timestamps to reflect the on-disk representation.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-By: Tigran Aivazian <aivazian.tigran@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: aivazian.tigran@gmail.com
Cc: al@alarsen.net
Cc: coda@cs.cmu.edu
Cc: darrick.wong@oracle.com
Cc: dushistov@mail.ru
Cc: dwmw2@infradead.org
Cc: hch@infradead.org
Cc: jack@suse.com
Cc: jaharkes@cs.cmu.edu
Cc: luisbg@kernel.org
Cc: nico@fluxnic.net
Cc: phillip@squashfs.org.uk
Cc: richard@nod.at
Cc: salah.triki@gmail.com
Cc: shaggy@kernel.org
Cc: linux-xfs@vger.kernel.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: reiserfs-devel@vger.kernel.org

show more ...

Cramfs: trivial whitespace fixes

Signed-off-by: Nicolas Pitre <nico@linaro.org>

Cramfs: fix abad comparison when wrap-arounds occur

It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buff

Cramfs: fix abad comparison when wrap-arounds occur

It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org

show more ...

cramfs: convert to use vmf_insert_mixed

cramfs is the only remaining user of vm_insert_mixed() and should be
converted to vmf_insert_mixed().

Based on a previous patch from Matthew Wilcox.

Link: h

cramfs: convert to use vmf_insert_mixed

cramfs is the only remaining user of vm_insert_mixed() and should be
converted to vmf_insert_mixed().

Based on a previous patch from Matthew Wilcox.

Link: http://lkml.kernel.org/r/nycvar.YSQ.7.76.1808290945450.10215@knanqh.ubzr
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>a
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

vfs: change inode times to use struct timespec64

struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following co

vfs: change inode times to use struct timespec64

struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.

The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.

virtual patch

@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
current_time ( ... )
{
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
...
- return timespec_trunc(
+ return timespec64_trunc(
... );
}

@ depends on patch @
identifier xtime;
@@
struct \( iattr \| inode \| kstat \) {
...
- struct timespec xtime;
+ struct timespec64 xtime;
...
}

@ depends on patch @
identifier t;
@@
struct inode_operations {
...
int (*update_time) (...,
- struct timespec t,
+ struct timespec64 t,
...);
...
}

@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
...) { ... }

@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
) { ... }

@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)

<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)

@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}

@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ;
|
node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
stat->xtime = node2->i_xtime1;
|
stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>

show more ...

cramfs_lookup(): use d_splice_alias()

simpler code that way, actually

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

cramfs: Fix IS_ENABLED typo

There's an extra C here...

Fixes: 99c18ce580c6 ("cramfs: direct memory access support")
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Joe Perches <joe@perches

cramfs: Fix IS_ENABLED typo

There's an extra C here...

Fixes: 99c18ce580c6 ("cramfs: direct memory access support")
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

Rename superblock flags (MS_xyz -> SB_xyz)

This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for th

Rename superblock flags (MS_xyz -> SB_xyz)

This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"

SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

for f in $L; do sed -i $f $SED_PROG; done

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

cramfs: add mmap support

When cramfs in physical memory is used then we have the opportunity
to map files directly from ROM, directly into user space, saving on
RAM usage. This gives us Execute-In-P

cramfs: add mmap support

When cramfs in physical memory is used then we have the opportunity
to map files directly from ROM, directly into user space, saving on
RAM usage. This gives us Execute-In-Place (XIP) support.

For a file to be mmap()-able, the map area has to correspond to a range
of uncompressed and contiguous blocks, and in the MMU case it also has
to be page aligned. A version of mkcramfs with appropriate support is
necessary to create such a filesystem image.

In the MMU case it may happen for a vma structure to extend beyond the
actual file size. This is notably the case in binfmt_elf.c:elf_map().
Or the file's last block is shared with other files and cannot be mapped
as is. Rather than refusing to mmap it, we do a "mixed" map and let the
regular fault handler populate the unmapped area with RAM-backed pages.
In practice the unmapped area is seldom accessed so page faults might
never occur before this area is discarded.

In the non-MMU case it is the get_unmapped_area method that is responsible
for providing the address where the actual data can be found. No mapping
is necessary of course.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...