btrfs: convert btrfs_read_merkle_tree_page() to use a folio

Remove a number of hidden calls to compound_head() by using a folio
throughout. Also follow core kernel coding style by adding the folio

btrfs: convert btrfs_read_merkle_tree_page() to use a folio

Remove a number of hidden calls to compound_head() by using a folio
throughout. Also follow core kernel coding style by adding the folio to
the page cache immediately after allocation instead of doing the read
first, then adding it to the page cache. This ordering makes subsequent
readers block waiting for the first reader instead of duplicating the
work only to throw it away when they find out they lost the race.

Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

fsverity: pass pos and size to ->write_merkle_tree_block

fsverity_operations::write_merkle_tree_block is passed the index of the
block to write and the log base 2 of the block size. However, all
im

fsverity: pass pos and size to ->write_merkle_tree_block

fsverity_operations::write_merkle_tree_block is passed the index of the
block to write and the log base 2 of the block size. However, all
implementations of it use these parameters only to calculate the
position and the size of the block, in bytes.

Therefore, make ->write_merkle_tree_block take 'pos' and 'size'
parameters instead of 'index' and 'log_blocksize'.

Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20221214224304.145712-5-ebiggers@kernel.org

show more ...

btrfs: move orphan prototypes into orphan.h

Move these out of ctree.h into orphan.h to cut down on code in ctree.h.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dste

btrfs: move orphan prototypes into orphan.h

Move these out of ctree.h into orphan.h to cut down on code in ctree.h.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: move verity prototypes into verity.h

Move these out of ctree.h into verity.h to cut down on code in ctree.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef

btrfs: move verity prototypes into verity.h

Move these out of ctree.h into verity.h to cut down on code in ctree.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: move ioctl prototypes into ioctl.h

Move these out of ctree.h into ioctl.h to cut down on code in ctree.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Ba

btrfs: move ioctl prototypes into ioctl.h

Move these out of ctree.h into ioctl.h to cut down on code in ctree.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: move accessor helpers into accessors.h

This is a large patch, but because they're all macros it's impossible to
split up. Simply copy all of the item accessors in ctree.h and paste
them in a

btrfs: move accessor helpers into accessors.h

This is a large patch, but because they're all macros it's impossible to
split up. Simply copy all of the item accessors in ctree.h and paste
them in accessors.h, and then update any files to include the header so
everything compiles.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comments, style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: move the printk helpers out of ctree.h

We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches wi

btrfs: move the printk helpers out of ctree.h

We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: move fs wide helpers out of ctree.h

We have several fs wide related helpers in ctree.h. The bulk of these
are the incompat flag test helpers, but there are things such as
btrfs_fs_closing()

btrfs: move fs wide helpers out of ctree.h

We have several fs wide related helpers in ctree.h. The bulk of these
are the incompat flag test helpers, but there are things such as
btrfs_fs_closing() and the read only helpers that also aren't directly
related to the ctree code. Move these into a fs.h header, which will
serve as the location for file system wide related helpers.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: send: add support for fs-verity

Preserve the fs-verity status of a btrfs file across send/recv.

There is no facility for installing the Merkle tree contents directly on
the receiving filesys

btrfs: send: add support for fs-verity

Preserve the fs-verity status of a btrfs file across send/recv.

There is no facility for installing the Merkle tree contents directly on
the receiving filesystem, so we package up the parameters used to enable
verity found in the verity descriptor. This gives the receive side
enough information to properly enable verity again. Note that this means
that receive will have to re-compute the whole Merkle tree, similar to
how compression worked before encoded_write.

Since the file becomes read-only after verity is enabled, it is
important that verity is added to the send stream after any file writes.
Therefore, when we process a verity item, merely note that it happened,
then actually create the command in the send stream during
'finish_inode_if_needed'.

This also creates V3 of the send stream format, without any format
changes besides adding the new commands and attributes.

Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: drop the _nr from the item helpers

Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be

btrfs: drop the _nr from the item helpers

Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then
rename all of the callers to the new helpers.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: fix transaction handle leak after verity rollback failure

During a verity rollback, if we fail to update the inode or delete the
orphan, we abort the transaction and return without releasing

btrfs: fix transaction handle leak after verity rollback failure

During a verity rollback, if we fail to update the inode or delete the
orphan, we abort the transaction and return without releasing our
transaction handle. Fix that by releasing the handle.

Fixes: 146054090b0859 ("btrfs: initial fsverity support")
Fixes: 705242538ff348 ("btrfs: verity metadata orphan items")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: verity metadata orphan items

Writing out the verity data is too large of an operation to do in a
single transaction. If we are interrupted before we finish creating
fsverity metadata for a fi

btrfs: verity metadata orphan items

Writing out the verity data is too large of an operation to do in a
single transaction. If we are interrupted before we finish creating
fsverity metadata for a file, or fail to clean up already created
metadata after a failure, we could leak the verity items that we already
committed.

To address this issue, we use the orphan mechanism. When we start
enabling verity on a file, we also add an orphan item for that inode.
When we are finished, we delete the orphan. However, if we are
interrupted midway, the orphan will be present at mount and we can
cleanup the half-formed verity state.

There is a possible race with a normal unlink operation: if unlink and
verity run on the same file in parallel, it is possible for verity to
succeed and delete the still legitimate orphan added by unlink. Then, if
we are interrupted and mount in that state, we will never clean up the
inode properly. This is also possible for a file created with O_TMPFILE.
Check nlink==0 before deleting to avoid this race.

A final thing to note is that this is a resurrection of using orphans to
signal an operation besides "delete this inode". The old case was to
signal the need to do a truncate. That case still technically applies
for mounting very old file systems, so we need to take some care to not
clobber it. To that end, we just have to be careful that verity orphan
cleanup is a no-op for non-verity files.

Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: initial fsverity support

Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores

btrfs: initial fsverity support

Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.

Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.

Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.

Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.

Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...