Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23 |
|
#
14431815 |
| 21-Mar-2024 |
Boris Burkov <boris@bur.io> |
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_su
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
commit 74e97958121aa1f5854da6effba70143f051b0cd upstream.
Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the following properties:
1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.
Fixes: e85fde5162bf ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
eb344109 |
| 23-Feb-2024 |
Filipe Manana <fdmanana@suse.com> |
btrfs: fix double free of anonymous device after snapshot creation failure
commit e2b54eaf28df0c978626c9736b94f003b523b451 upstream.
When creating a snapshot we may do a double free of an anonymous
btrfs: fix double free of anonymous device after snapshot creation failure
commit e2b54eaf28df0c978626c9736b94f003b523b451 upstream.
When creating a snapshot we may do a double free of an anonymous device in case there's an error committing the transaction. The second free may result in freeing an anonymous device number that was allocated by some other subsystem in the kernel or another btrfs filesystem.
The steps that lead to this:
1) At ioctl.c:create_snapshot() we allocate an anonymous device number and assign it to pending_snapshot->anon_dev;
2) Then we call btrfs_commit_transaction() and end up at transaction.c:create_pending_snapshot();
3) There we call btrfs_get_new_fs_root() and pass it the anonymous device number stored in pending_snapshot->anon_dev;
4) btrfs_get_new_fs_root() frees that anonymous device number because btrfs_lookup_fs_root() returned a root - someone else did a lookup of the new root already, which could some task doing backref walking;
5) After that some error happens in the transaction commit path, and at ioctl.c:create_snapshot() we jump to the 'fail' label, and after that we free again the same anonymous device number, which in the meanwhile may have been reallocated somewhere else, because pending_snapshot->anon_dev still has the same value as in step 1.
Recently syzbot ran into this and reported the following trace:
------------[ cut here ]------------ ida_free called for id=51 which is not allocated. WARNING: CPU: 1 PID: 31038 at lib/idr.c:525 ida_free+0x370/0x420 lib/idr.c:525 Modules linked in: CPU: 1 PID: 31038 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00410-gc02197fc9076 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:ida_free+0x370/0x420 lib/idr.c:525 Code: 10 42 80 3c 28 (...) RSP: 0018:ffffc90015a67300 EFLAGS: 00010246 RAX: be5130472f5dd000 RBX: 0000000000000033 RCX: 0000000000040000 RDX: ffffc90009a7a000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: ffffc90015a673f0 R08: ffffffff81577992 R09: 1ffff92002b4cdb4 R10: dffffc0000000000 R11: fffff52002b4cdb5 R12: 0000000000000246 R13: dffffc0000000000 R14: ffffffff8e256b80 R15: 0000000000000246 FS: 00007fca3f4b46c0(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f167a17b978 CR3: 000000001ed26000 CR4: 0000000000350ef0 Call Trace: <TASK> btrfs_get_root_ref+0xa48/0xaf0 fs/btrfs/disk-io.c:1346 create_pending_snapshot+0xff2/0x2bc0 fs/btrfs/transaction.c:1837 create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1931 btrfs_commit_transaction+0xf1c/0x3740 fs/btrfs/transaction.c:2404 create_snapshot+0x507/0x880 fs/btrfs/ioctl.c:848 btrfs_mksubvol+0x5d0/0x750 fs/btrfs/ioctl.c:998 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1044 __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1306 btrfs_ioctl_snap_create_v2+0x1ca/0x400 fs/btrfs/ioctl.c:1393 btrfs_ioctl+0xa74/0xd40 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xfe/0x170 fs/ioctl.c:857 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7fca3e67dda9 Code: 28 00 00 00 (...) RSP: 002b:00007fca3f4b40c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fca3e7abf80 RCX: 00007fca3e67dda9 RDX: 00000000200005c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 00007fca3e6ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fca3e7abf80 R15: 00007fff6bf95658 </TASK>
Where we get an explicit message where we attempt to free an anonymous device number that is not currently allocated. It happens in a different code path from the example below, at btrfs_get_root_ref(), so this change may not fix the case triggered by syzbot.
To fix at least the code path from the example above, change btrfs_get_root_ref() and its callers to receive a dev_t pointer argument for the anonymous device number, so that in case it frees the number, it also resets it to 0, so that up in the call chain we don't attempt to do the double free.
CC: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/linux-btrfs/000000000000f673a1061202f630@google.com/ Fixes: e03ee2fe873e ("btrfs: do not ASSERT() if the newly created subvolume already got read") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12 |
|
#
4f48ef7d |
| 10-Jan-2024 |
Boris Burkov <boris@bur.io> |
btrfs: forbid creating subvol qgroups
commit 0c309d66dacddf8ce939b891d9ead4a8e21ad6f0 upstream.
Creating a qgroup 0/subvolid leads to various races and it isn't helpful, because you can't specify a
btrfs: forbid creating subvol qgroups
commit 0c309d66dacddf8ce939b891d9ead4a8e21ad6f0 upstream.
Creating a qgroup 0/subvolid leads to various races and it isn't helpful, because you can't specify a subvol id when creating a subvol, so you can't be sure it will be the right one. Any requirements on the automatic subvol can be gratified by using a higher level qgroup and the inheritance parameters of subvol creation.
Fixes: cecbb533b5fc ("btrfs: record simple quota deltas in delayed refs") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.11, v6.6.10 |
|
#
ec794a75 |
| 04-Jan-2024 |
Omar Sandoval <osandov@fb.com> |
btrfs: don't abort filesystem when attempting to snapshot deleted subvolume
commit 7081929ab2572920e94d70be3d332e5c9f97095a upstream.
If the source file descriptor to the snapshot ioctl refers to a
btrfs: don't abort filesystem when attempting to snapshot deleted subvolume
commit 7081929ab2572920e94d70be3d332e5c9f97095a upstream.
If the source file descriptor to the snapshot ioctl refers to a deleted subvolume, we get the following abort:
BTRFS: Transaction aborted (error -2) WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs] Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs] RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027 RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840 RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998 R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80 FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0 Call Trace: <TASK> ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? __warn+0x81/0x130 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? report_bug+0x171/0x1a0 ? handle_bug+0x3a/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? create_pending_snapshot+0x1040/0x1190 [btrfs] create_pending_snapshots+0x92/0xc0 [btrfs] btrfs_commit_transaction+0x66b/0xf40 [btrfs] btrfs_mksubvol+0x301/0x4d0 [btrfs] btrfs_mksnapshot+0x80/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs] btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs] btrfs_ioctl+0x8a6/0x2650 [btrfs] ? kmem_cache_free+0x22/0x340 ? do_sys_openat2+0x97/0xe0 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe20abe83af RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry BTRFS info (device vdc: state EA): forced readonly BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction. BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry
This happens because create_pending_snapshot() initializes the new root item as a copy of the source root item. This includes the refs field, which is 0 for a deleted subvolume. The call to btrfs_insert_root() therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then finds the root and returns -ENOENT if refs == 0, which causes create_pending_snapshot() to abort.
Fix it by checking the source root's refs before attempting the snapshot, but after locking subvol_sem to avoid racing with deletion.
CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
5556a872 |
| 09-Jan-2024 |
Qu Wenruo <wqu@suse.com> |
btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args
commit 173431b274a9a54fc10b273b46e67f46bcf62d2e upstream.
Add extra sanity check for btrfs_ioctl_defrag_range_args::flags.
This
btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args
commit 173431b274a9a54fc10b273b46e67f46bcf62d2e upstream.
Add extra sanity check for btrfs_ioctl_defrag_range_args::flags.
This is not really to enhance fuzzing tests, but as a preparation for future expansion on btrfs_ioctl_defrag_range_args.
In the future we're going to add new members, allowing more fine tuning for btrfs defrag. Without the -ENONOTSUPP error, there would be no way to detect if the kernel supports those new defrag features.
CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.9, v6.6.8 |
|
#
65446174 |
| 15-Dec-2023 |
Josef Bacik <josef@toxicpanda.com> |
btrfs: do not allow non subvolume root targets for snapshot
commit a8892fd71933126ebae3d60aec5918d4dceaae76 upstream.
Our btrfs subvolume snapshot <source> <destination> utility enforces that <sour
btrfs: do not allow non subvolume root targets for snapshot
commit a8892fd71933126ebae3d60aec5918d4dceaae76 upstream.
Our btrfs subvolume snapshot <source> <destination> utility enforces that <source> is the root of the subvolume, however this isn't enforced in the kernel. Update the kernel to also enforce this limitation to avoid problems with other users of this ioctl that don't have the appropriate checks in place.
Reported-by: Martin Michaelis <code@mgjm.de> CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2 |
|
#
4a1a4bf2 |
| 14-Nov-2023 |
David Sterba <dsterba@suse.com> |
btrfs: fix 64bit compat send ioctl arguments not initializing version member
commit 5de0434bc064606d6b7467ec3e5ad22963a18c04 upstream.
When the send protocol versioning was added in 5.16 e77fbf9903
btrfs: fix 64bit compat send ioctl arguments not initializing version member
commit 5de0434bc064606d6b7467ec3e5ad22963a18c04 upstream.
When the send protocol versioning was added in 5.16 e77fbf990316 ("btrfs: send: prepare for v2 protocol"), the 32/64bit compat code was not updated (added by 2351f431f727 ("btrfs: fix send ioctl on 32bit with 64bit kernel")), missing the version struct member. The compat code is probably rarely used, nobody reported any bugs.
Found by tool https://github.com/jirislaby/clang-struct .
Fixes: e77fbf990316 ("btrfs: send: prepare for v2 protocol") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3 |
|
#
d5e09e38 |
| 12-Sep-2023 |
Filipe Manana <fdmanana@suse.com> |
btrfs: abort transaction on generation mismatch when marking eb as dirty
[ Upstream commit 50564b651d01c19ce732819c5b3c3fd60707188e ]
When marking an extent buffer as dirty, at btrfs_mark_buffer_di
btrfs: abort transaction on generation mismatch when marking eb as dirty
[ Upstream commit 50564b651d01c19ce732819c5b3c3fd60707188e ]
When marking an extent buffer as dirty, at btrfs_mark_buffer_dirty(), we check if its generation matches the running transaction and if not we just print a warning. Such mismatch is an indicator that something really went wrong and only printing a warning message (and stack trace) is not enough to prevent a corruption. Allowing a transaction to commit with such an extent buffer will trigger an error if we ever try to read it from disk due to a generation mismatch with its parent generation.
So abort the current transaction with -EUCLEAN if we notice a generation mismatch. For this we need to pass a transaction handle to btrfs_mark_buffer_dirty() which is always available except in test code, in which case we can pass NULL since it operates on dummy extent buffers and all test roots have a single node/leaf (root node at level 0).
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
#
9ac639de |
| 13-Oct-2023 |
Filipe Manana <fdmanana@suse.com> |
btrfs: use u64 for buffer sizes in the tree search ioctls
[ Upstream commit dec96fc2dcb59723e041416b8dc53e011b4bfc2e ]
In the tree search v2 ioctl we use the type size_t, which is an unsigned long,
btrfs: use u64 for buffer sizes in the tree search ioctls
[ Upstream commit dec96fc2dcb59723e041416b8dc53e011b4bfc2e ]
In the tree search v2 ioctl we use the type size_t, which is an unsigned long, to track the buffer size in the local variable 'buf_size'. An unsigned long is 32 bits wide on a 32 bits architecture. The buffer size defined in struct btrfs_ioctl_search_args_v2 is a u64, so when we later try to copy the local variable 'buf_size' to the argument struct, when the search returns -EOVERFLOW, we copy only 32 bits which will be a problem on big endian systems.
Fix this by using a u64 type for the buffer sizes, not only at btrfs_ioctl_tree_search_v2(), but also everywhere down the call chain so that we can use the u64 at btrfs_ioctl_tree_search_v2().
Fixes: cc68a8a5a433 ("btrfs: new ioctl TREE_SEARCH_V2") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/linux-btrfs/ce6f4bd6-9453-4ffe-ba00-cee35495e10f@moroto.mountain/ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
#
9147b9de |
| 26-Sep-2023 |
Josef Bacik <josef@toxicpanda.com> |
btrfs: fix some -Wmaybe-uninitialized warnings in ioctl.c
Jens reported the following warnings from -Wmaybe-uninitialized recent Linus' branch.
In file included from ./include/asm-generic/rwonce.
btrfs: fix some -Wmaybe-uninitialized warnings in ioctl.c
Jens reported the following warnings from -Wmaybe-uninitialized recent Linus' branch.
In file included from ./include/asm-generic/rwonce.h:26, from ./arch/arm64/include/asm/rwonce.h:71, from ./include/linux/compiler.h:246, from ./include/linux/export.h:5, from ./include/linux/linkage.h:7, from ./include/linux/kernel.h:17, from fs/btrfs/ioctl.c:6: In function ‘instrument_copy_from_user_before’, inlined from ‘_copy_from_user’ at ./include/linux/uaccess.h:148:3, inlined from ‘copy_from_user’ at ./include/linux/uaccess.h:183:7, inlined from ‘btrfs_ioctl_space_info’ at fs/btrfs/ioctl.c:2999:6, inlined from ‘btrfs_ioctl’ at fs/btrfs/ioctl.c:4616:10: ./include/linux/kasan-checks.h:38:27: warning: ‘space_args’ may be used uninitialized [-Wmaybe-uninitialized] 38 | #define kasan_check_write __kasan_check_write ./include/linux/instrumented.h:129:9: note: in expansion of macro ‘kasan_check_write’ 129 | kasan_check_write(to, n); | ^~~~~~~~~~~~~~~~~ ./include/linux/kasan-checks.h: In function ‘btrfs_ioctl’: ./include/linux/kasan-checks.h:20:6: note: by argument 1 of type ‘const volatile void *’ to ‘__kasan_check_write’ declared here 20 | bool __kasan_check_write(const volatile void *p, unsigned int size); | ^~~~~~~~~~~~~~~~~~~ fs/btrfs/ioctl.c:2981:39: note: ‘space_args’ declared here 2981 | struct btrfs_ioctl_space_args space_args; | ^~~~~~~~~~ In function ‘instrument_copy_from_user_before’, inlined from ‘_copy_from_user’ at ./include/linux/uaccess.h:148:3, inlined from ‘copy_from_user’ at ./include/linux/uaccess.h:183:7, inlined from ‘_btrfs_ioctl_send’ at fs/btrfs/ioctl.c:4343:9, inlined from ‘btrfs_ioctl’ at fs/btrfs/ioctl.c:4658:10: ./include/linux/kasan-checks.h:38:27: warning: ‘args32’ may be used uninitialized [-Wmaybe-uninitialized] 38 | #define kasan_check_write __kasan_check_write ./include/linux/instrumented.h:129:9: note: in expansion of macro ‘kasan_check_write’ 129 | kasan_check_write(to, n); | ^~~~~~~~~~~~~~~~~ ./include/linux/kasan-checks.h: In function ‘btrfs_ioctl’: ./include/linux/kasan-checks.h:20:6: note: by argument 1 of type ‘const volatile void *’ to ‘__kasan_check_write’ declared here 20 | bool __kasan_check_write(const volatile void *p, unsigned int size); | ^~~~~~~~~~~~~~~~~~~ fs/btrfs/ioctl.c:4341:49: note: ‘args32’ declared here 4341 | struct btrfs_ioctl_send_args_32 args32; | ^~~~~~
This was due to his config options and having KASAN turned on, which adds some extra checks around copy_from_user(), which then triggered the -Wmaybe-uninitialized checker for these cases.
Fix the warnings by initializing the different structs we're copying into.
Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
show more ...
|
Revision tags: v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48 |
|
#
ee34a82e |
| 26-Aug-2023 |
Filipe Manana <fdmanana@suse.com> |
btrfs: release path before inode lookup during the ino lookup ioctl
During the ino lookup ioctl we can end up calling btrfs_iget() to get an inode reference while we are holding on a root's btree. I
btrfs: release path before inode lookup during the ino lookup ioctl
During the ino lookup ioctl we can end up calling btrfs_iget() to get an inode reference while we are holding on a root's btree. If btrfs_iget() needs to lookup the inode from the root's btree, because it's not currently loaded in memory, then it will need to lock another or the same path in the same root btree. This may result in a deadlock and trigger the following lockdep splat:
WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Not tainted ------------------------------------------------------ syz-executor277/5012 is trying to acquire lock: ffff88802df41710 (btrfs-tree-01){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
but task is already holding lock: ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-tree-00){++++}-{3:3}: down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645 __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136 btrfs_search_slot+0x13a4/0x2f80 fs/btrfs/ctree.c:2302 btrfs_init_root_free_objectid+0x148/0x320 fs/btrfs/disk-io.c:4955 btrfs_init_fs_root fs/btrfs/disk-io.c:1128 [inline] btrfs_get_root_ref+0x5ae/0xae0 fs/btrfs/disk-io.c:1338 btrfs_get_fs_root fs/btrfs/disk-io.c:1390 [inline] open_ctree+0x29c8/0x3030 fs/btrfs/disk-io.c:3494 btrfs_fill_super+0x1c7/0x2f0 fs/btrfs/super.c:1154 btrfs_mount_root+0x7e0/0x910 fs/btrfs/super.c:1519 legacy_get_tree+0xef/0x190 fs/fs_context.c:611 vfs_get_tree+0x8c/0x270 fs/super.c:1519 fc_mount fs/namespace.c:1112 [inline] vfs_kern_mount+0xbc/0x150 fs/namespace.c:1142 btrfs_mount+0x39f/0xb50 fs/btrfs/super.c:1579 legacy_get_tree+0xef/0x190 fs/fs_context.c:611 vfs_get_tree+0x8c/0x270 fs/super.c:1519 do_new_mount+0x28f/0xae0 fs/namespace.c:3335 do_mount fs/namespace.c:3675 [inline] __do_sys_mount fs/namespace.c:3884 [inline] __se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (btrfs-tree-01){++++}-{3:3}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645 __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136 btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline] btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281 btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline] btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412 btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline] btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716 btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline] btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105 btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1 ---- ---- rlock(btrfs-tree-00); lock(btrfs-tree-01); lock(btrfs-tree-00); rlock(btrfs-tree-01);
*** DEADLOCK ***
1 lock held by syz-executor277/5012: #0: ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
stack backtrace: CPU: 1 PID: 5012 Comm: syz-executor277 Not tainted 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 check_noncircular+0x375/0x4a0 kernel/locking/lockdep.c:2195 check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645 __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136 btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline] btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281 btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline] btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412 btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline] btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716 btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline] btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105 btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f0bec94ea39
Fix this simply by releasing the path before calling btrfs_iget() as at point we don't need the path anymore.
Reported-by: syzbot+bf66ad948981797d2f1d@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/00000000000045fa140603c4a969@google.com/ Fixes: 23d0b79dfaed ("btrfs: Add unprivileged version of ino_lookup ioctl") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
show more ...
|
Revision tags: v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39 |
|
#
2a9462de |
| 05-Jul-2023 |
Jeff Layton <jlayton@kernel.org> |
btrfs: convert to ctime accessor functions
In later patches, we're going to change how the inode's ctime field is used. Switch to using accessor functions instead of raw accesses of inode->i_ctime.
btrfs: convert to ctime accessor functions
In later patches, we're going to change how the inode's ctime field is used. Switch to using accessor functions instead of raw accesses of inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230705190309.579783-27-jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
show more ...
|
Revision tags: v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29 |
|
#
edc72881 |
| 11-May-2023 |
Qu Wenruo <wqu@suse.com> |
btrfs: trigger orphan inode cleanup during START_SYNC ioctl
There is an internal error report that scrub found an error in an orphan inode's data.
However there are very limited ways to cleanup suc
btrfs: trigger orphan inode cleanup during START_SYNC ioctl
There is an internal error report that scrub found an error in an orphan inode's data.
However there are very limited ways to cleanup such orphan inodes:
- btrfs_start_pre_rw_mount() This happens at either mount, or RO->RW switch. This is not a viable solution for root fs which may not be unmounted or RO mounted.
Furthermore this doesn't cover every subvolume, it only covers the currently cached subvolumes.
- btrfs_lookup_dentry() This happens when we first lookup the subvolume dentry. But dentry can be cached thus it's not ensured to be triggered every time.
- create_snapshot() This only happens for the created snapshot, not the source one.
This means if we didn't trigger orphan items cleanup, there is really no other way to manually trigger it. Add this step to the START_SYNC ioctl. This is a slight change in the semantics of the ioctl but as sync can be potentially slow and is usually paired with WAIT_SYNC ioctl.
The errors are not handled because the main point of the ioctl is the async commit, orphan cleanup is a side effect.
Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
show more ...
|
Revision tags: v6.1.28 |
|
#
12df6a62 |
| 02-May-2023 |
Tom Rix <trix@redhat.com> |
btrfs: simplify transid initialization in btrfs_ioctl_wait_sync
A small code simplification, move the default value of transid to its initialization and remove the else-statement.
Signed-off-by: To
btrfs: simplify transid initialization in btrfs_ioctl_wait_sync
A small code simplification, move the default value of transid to its initialization and remove the else-statement.
Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
show more ...
|
Revision tags: v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24 |
|
#
1b53e51a |
| 11-Apr-2023 |
Sweet Tea Dorminy <sweettea-kernel@dorminy.me> |
btrfs: don't commit transaction for every subvol create
Recently a Meta-internal workload encountered subvolume creation taking up to 2s each, significantly slower than directory creation. As they w
btrfs: don't commit transaction for every subvol create
Recently a Meta-internal workload encountered subvolume creation taking up to 2s each, significantly slower than directory creation. As they were hoping to be able to use subvolumes instead of directories, and were looking to create hundreds, this was a significant issue. After Josef investigated, it turned out to be due to the transaction commit currently performed at the end of subvolume creation.
This change improves the workload by not doing transaction commit for every subvolume creation, and merely requiring a transaction commit on fsync. In the worst case, of doing a subvolume create and fsync in a loop, this should require an equal amount of time to the current scheme; and in the best case, the internal workload creating hundreds of subvolumes before fsyncing is greatly improved.
While it would be nice to be able to use the log tree and use the normal fsync path, log tree replay can't deal with new subvolume inodes presently.
It's possible that there's some reason that the transaction commit is necessary for correctness during subvolume creation; however, git logs indicate that the commit dates back to the beginning of subvolume creation, and there are no notes on why it would be necessary.
Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
show more ...
|
#
2736e8ee |
| 08-Jun-2023 |
Christoph Hellwig <hch@lst.de> |
block: use the holder as indication for exclusive opens
The current interface for exclusive opens is rather confusing as it requires both the FMODE_EXCL flag and a holder. Remove the need to pass F
block: use the holder as indication for exclusive opens
The current interface for exclusive opens is rather confusing as it requires both the FMODE_EXCL flag and a holder. Remove the need to pass FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides better debug checking that only the holder actually releases the hold, but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
show more ...
|