xen/manage: Use orderly_reboot() to reboot

Currently when the toolstack issues a reboot, it gets translated into a
call to ctrl_alt_del(). But tying reboot to ctrl-alt-del means rebooting
may fail i

xen/manage: Use orderly_reboot() to reboot

Currently when the toolstack issues a reboot, it gets translated into a
call to ctrl_alt_del(). But tying reboot to ctrl-alt-del means rebooting
may fail if e.g. the user has masked the ctrl-alt-del.target under
systemd.

A previous attempt to fix this issue made a change that sets the
kernel.ctrl-alt-del sysctl to 1 before ctrl_alt_del() is called.
However, this doesn't give userspace the opportunity to block rebooting
or even do any cleanup or syncing.

Instead, call orderly_reboot() which will call the "reboot" command,
giving userspace the opportunity to block it or perform the usual reboot
process while being independent of the ctrl-alt-del behaviour. It also
matches what happens in the shutdown case.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220627142822.3612106-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>

show more ...

xen: don't hang when resuming PCI device

If a xen domain with at least two VCPUs has a PCI device attached which
enters the D3hot state during suspend, the kernel may hang while
resuming, depending

xen: don't hang when resuming PCI device

If a xen domain with at least two VCPUs has a PCI device attached which
enters the D3hot state during suspend, the kernel may hang while
resuming, depending on the core on which an async resume task gets
scheduled.

The bug occurs because xen's do_suspend calls dpm_resume_start while
only the timer of the boot CPU has been resumed (when xen_suspend called
syscore_resume), before calling xen_arch_suspend to resume the timers of
the other CPUs. This breaks pci_dev_d3_sleep.

Thus this patch moves the call to xen_arch_resume before the call to
dpm_resume_start, eliminating the hangs and restoring the stack-like
structure of the suspend/restore procedure.

Signed-off-by: Jakub Kądziołka <niedzejkob@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220323012103.2537-1-niedzejkob@invisiblethingslab.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

show more ...

xen/manage: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
throu

xen/manage: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/5cfc00b1d8ed68eb2c2b6317806a0aa7e57d27f1.1605896060.git.gustavoars@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>

show more ...

treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

- Have no license information of any form

- Have EXPORT_.*_SYMBOL_GPL inside which was use

treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

- Have no license information of any form

- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

xen/manage: don't complain about an empty value in control/sysrq node

When guest receives a sysrq request from the host it acknowledges it by
writing '\0' to control/sysrq xenstore node. This, howev

xen/manage: don't complain about an empty value in control/sysrq node

When guest receives a sysrq request from the host it acknowledges it by
writing '\0' to control/sysrq xenstore node. This, however, make xenstore
watch fire again but xenbus_scanf() fails to parse empty value with "%c"
format string:

sysrq: SysRq : Emergency Sync
Emergency Sync complete
xen:manage: Error -34 reading sysrq code in control/sysrq

Ignore -ERANGE the same way we already ignore -ENOENT, empty value in
control/sysrq is totally legal.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

show more ...

xen: add error handling for xenbus_printf

When xenbus_printf fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling xenbus_printf.

S

xen: add error handling for xenbus_printf

When xenbus_printf fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling xenbus_printf.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

show more ...

xen/time: do not decrease steal time after live migration on xen

After guest live migration on xen, steal time in /proc/stat
(cpustat[CPUTIME_STEAL]) might decrease because steal returned by
xen_ste

xen/time: do not decrease steal time after live migration on xen

After guest live migration on xen, steal time in /proc/stat
(cpustat[CPUTIME_STEAL]) might decrease because steal returned by
xen_steal_lock() might be less than this_rq()->prev_steal_time which is
derived from previous return value of xen_steal_clock().

For instance, steal time of each vcpu is 335 before live migration.

cpu 198 0 368 200064 1962 0 0 1340 0 0
cpu0 38 0 81 50063 492 0 0 335 0 0
cpu1 65 0 97 49763 634 0 0 335 0 0
cpu2 38 0 81 50098 462 0 0 335 0 0
cpu3 56 0 107 50138 374 0 0 335 0 0

After live migration, steal time is reduced to 312.

cpu 200 0 370 200330 1971 0 0 1248 0 0
cpu0 38 0 82 50123 500 0 0 312 0 0
cpu1 65 0 97 49832 634 0 0 312 0 0
cpu2 39 0 82 50167 462 0 0 312 0 0
cpu3 56 0 107 50207 374 0 0 312 0 0

Since runstate times are cumulative and cleared during xen live migration
by xen hypervisor, the idea of this patch is to accumulate runstate times
to global percpu variables before live migration suspend. Once guest VM is
resumed, xen_get_runstate_snapshot_cpu() would always return the sum of new
runstate times and previously accumulated times stored in global percpu
variables.

Comment above HYPERVISOR_suspend() has been removed as it is inaccurate:
the call can return an error code (e.g., possibly -EPERM in the future).

Similar and more severe issue would impact prior linux 4.8-4.10 as
discussed by Michael Las at
https://0xstubs.org/debugging-a-flaky-cpu-steal-time-counter-on-a-paravirtualized-xen-guest,
which would overflow steal time and lead to 100% st usage in top command
for linux 4.8-4.10. A backport of this patch would fix that issue.

[boris: added linux/slab.h to driver/xen/time.c, slightly reformatted
commit message]

References: https://0xstubs.org/debugging-a-flaky-cpu-steal-time-counter-on-a-paravirtualized-xen-guest
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

show more ...

xen: don't print error message in case of missing Xenstore entry

When registering for the Xenstore watch of the node control/sysrq the
handler will be called at once. Don't issue an error message if

xen: don't print error message in case of missing Xenstore entry

When registering for the Xenstore watch of the node control/sysrq the
handler will be called at once. Don't issue an error message if the
Xenstore node isn't there, as it will be created only when an event
is being triggered.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

show more ...

init: Introduce SYSTEM_SCHEDULING state

might_sleep() debugging and smp_processor_id() debugging should be active
right after the scheduler starts working. The init task can invoke
smp_processor_id(

init: Introduce SYSTEM_SCHEDULING state

might_sleep() debugging and smp_processor_id() debugging should be active
right after the scheduler starts working. The init task can invoke
smp_processor_id() from preemptible context as it is pinned on the boot cpu
until sched_smp_init() removes the pinning and lets it schedule on all non
isolated cpus.

Add a new state which allows to enable those checks earlier and add it to
the xen do_poweroff() function.

No functional change.

Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184736.196214622@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

xen: modify xenstore watch event interface

Today a Xenstore watch event is delivered via a callback function
declared as:

void (*callback)(struct xenbus_watch *,
const char **vec,

xen: modify xenstore watch event interface

Today a Xenstore watch event is delivered via a callback function
declared as:

void (*callback)(struct xenbus_watch *,
const char **vec, unsigned int len);

As all watch events only ever come with two parameters (path and token)
changing the prototype to:

void (*callback)(struct xenbus_watch *,
const char *path, const char *token);

is the natural thing to do.

Apply this change and adapt all users.

Cc: konrad.wilk@oracle.com
Cc: roger.pau@citrix.com
Cc: wei.liu2@citrix.com
Cc: paul.durrant@citrix.com
Cc: netdev@vger.kernel.org

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

show more ...

xen/manage: correct return value check on xenbus_scanf()

A negative return value indicates an error; in fact the function at
present won't ever return zero.

Signed-off-by: Jan Beulich <jbeulich@sus

xen/manage: correct return value check on xenbus_scanf()

A negative return value indicates an error; in fact the function at
present won't ever return zero.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

show more ...

xenbus: advertise control feature flags

The Xen docs specify several flags which a guest can set to advertise
which values of the xenstore control/shutdown key it will recognize.
This patch adds cod

xenbus: advertise control feature flags

The Xen docs specify several flags which a guest can set to advertise
which values of the xenstore control/shutdown key it will recognize.
This patch adds code to write all the relevant feature-flag keys.

Based-on-patch-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

show more ...

xen: Use correctly the Xen memory terminologies

Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN
is meant, I suspect this is because the first support for Xen was for
PV. This r

xen: Use correctly the Xen memory terminologies

Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN
is meant, I suspect this is because the first support for Xen was for
PV. This resulted in some misimplementation of helpers on ARM and
confused developers about the expected behavior.

For instance, with pfn_to_mfn, we expect to get an MFN based on the name.
Although, if we look at the implementation on x86, it's returning a GFN.

For clarity and avoid new confusion, replace any reference to mfn with
gfn in any helpers used by PV drivers. The x86 code will still keep some
reference of pfn_to_mfn which may be used by all kind of guests
No changes as been made in the hypercall field, even
though they may be invalid, in order to keep the same as the defintion
in xen repo.

Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a
name to close to the KVM function gfn_to_page.

Take also the opportunity to simplify simple construction such
as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up
will come in follow-up patches.

[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cb

Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

show more ...

xen: Include xen/page.h rather than asm/xen/page.h

Using xen/page.h will be necessary later for using common xen page
helpers.

As xen/page.h already include asm/xen/page.h, always use the later.

S

xen: Include xen/page.h rather than asm/xen/page.h

Using xen/page.h will be necessary later for using common xen page
helpers.

As xen/page.h already include asm/xen/page.h, always use the later.

Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

show more ...

xen: Suspend ticks on all CPUs during suspend

Commit 77e32c89a711 ("clockevents: Manage device's state separately for
the core") decouples clockevent device's modes from states. With this
change whe

xen: Suspend ticks on all CPUs during suspend

Commit 77e32c89a711 ("clockevents: Manage device's state separately for
the core") decouples clockevent device's modes from states. With this
change when a Xen guest tries to resume, it won't be calling its
set_mode op which needs to be done on each VCPU in order to make the
hypervisor aware that we are in oneshot mode.

This happens because clockevents_tick_resume() (which is an intermediate
step of resuming ticks on a processor) doesn't call clockevents_set_state()
anymore and because during suspend clockevent devices on all VCPUs (except
for the one doing the suspend) are left in ONESHOT state. As result, during
resume the clockevents state machine will assume that device is already
where it should be and doesn't need to be updated.

To avoid this problem we should suspend ticks on all VCPUs during
suspend.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

show more ...

xen/manage: Fix USB interaction issues when resuming

Commit 61a734d305e1 ("xen/manage: Always freeze/thaw processes when
suspend/resuming") ensured that userspace processes were always frozen
before

xen/manage: Fix USB interaction issues when resuming

Commit 61a734d305e1 ("xen/manage: Always freeze/thaw processes when
suspend/resuming") ensured that userspace processes were always frozen
before suspending to reduce interaction issues when resuming devices.
However, freeze_processes() does not freeze kernel threads. Freeze
kernel threads as well to prevent deadlocks with the khubd thread when
resuming devices.

This is what native suspend and resume does.

Example deadlock:
[ 7279.648010] [<ffffffff81446bde>] ? xen_poll_irq_timeout+0x3e/0x50
[ 7279.648010] [<ffffffff81448d60>] xen_poll_irq+0x10/0x20
[ 7279.648010] [<ffffffff81011723>] xen_lock_spinning+0xb3/0x120
[ 7279.648010] [<ffffffff810115d1>] __raw_callee_save_xen_lock_spinning+0x11/0x20
[ 7279.648010] [<ffffffff815620b6>] ? usb_control_msg+0xe6/0x120
[ 7279.648010] [<ffffffff81747e50>] ? _raw_spin_lock_irq+0x50/0x60
[ 7279.648010] [<ffffffff8174522c>] wait_for_completion+0xac/0x160
[ 7279.648010] [<ffffffff8109c520>] ? try_to_wake_up+0x2c0/0x2c0
[ 7279.648010] [<ffffffff814b60f2>] dpm_wait+0x32/0x40
[ 7279.648010] [<ffffffff814b6eb0>] device_resume+0x90/0x210
[ 7279.648010] [<ffffffff814b7d71>] dpm_resume+0x121/0x250
[ 7279.648010] [<ffffffff8144c570>] ? xenbus_dev_request_and_reply+0xc0/0xc0
[ 7279.648010] [<ffffffff814b80d5>] dpm_resume_end+0x15/0x30
[ 7279.648010] [<ffffffff81449fba>] do_suspend+0x10a/0x200
[ 7279.648010] [<ffffffff8144a2f0>] ? xen_pre_suspend+0x20/0x20
[ 7279.648010] [<ffffffff8144a1d0>] shutdown_handler+0x120/0x150
[ 7279.648010] [<ffffffff8144c60f>] xenwatch_thread+0x9f/0x160
[ 7279.648010] [<ffffffff810ac510>] ? finish_wait+0x80/0x80
[ 7279.648010] [<ffffffff8108d189>] kthread+0xc9/0xe0
[ 7279.648010] [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80
[ 7279.648010] [<ffffffff8175087c>] ret_from_fork+0x7c/0xb0
[ 7279.648010] [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80

[ 7441.216287] INFO: task khubd:89 blocked for more than 120 seconds.
[ 7441.219457] Tainted: G X 3.13.11-ckt12.kz #1
[ 7441.222176] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 7441.225827] khubd D ffff88003f433440 0 89 2 0x00000000
[ 7441.229258] ffff88003ceb9b98 0000000000000046 ffff88003ce83000 0000000000013440
[ 7441.232959] ffff88003ceb9fd8 0000000000013440 ffff88003cd13000 ffff88003ce83000
[ 7441.236658] 0000000000000286 ffff88003d3e0000 ffff88003ceb9bd0 00000001001aa01e
[ 7441.240415] Call Trace:
[ 7441.241614] [<ffffffff817442f9>] schedule+0x29/0x70
[ 7441.243930] [<ffffffff81743406>] schedule_timeout+0x166/0x2c0
[ 7441.246681] [<ffffffff81075b80>] ? call_timer_fn+0x110/0x110
[ 7441.249339] [<ffffffff8174357e>] schedule_timeout_uninterruptible+0x1e/0x20
[ 7441.252644] [<ffffffff81077710>] msleep+0x20/0x30
[ 7441.254812] [<ffffffff81555f00>] hub_port_reset+0xf0/0x580
[ 7441.257400] [<ffffffff81558465>] hub_port_init+0x75/0xb40
[ 7441.259981] [<ffffffff814bb3c9>] ? update_autosuspend+0x39/0x60
[ 7441.262817] [<ffffffff814bb4f0>] ? pm_runtime_set_autosuspend_delay+0x50/0xa0
[ 7441.266212] [<ffffffff8155a64a>] hub_thread+0x71a/0x1750
[ 7441.268728] [<ffffffff810ac510>] ? finish_wait+0x80/0x80
[ 7441.271272] [<ffffffff81559f30>] ? usb_port_resume+0x670/0x670
[ 7441.274067] [<ffffffff8108d189>] kthread+0xc9/0xe0
[ 7441.276305] [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80
[ 7441.279131] [<ffffffff8175087c>] ret_from_fork+0x7c/0xb0
[ 7441.281659] [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

show more ...

xen/manage: Always freeze/thaw processes when suspend/resuming

Always freeze processes when suspending and thaw processes when resuming
to prevent a race noticeable with HVM guests.

This prevents a

xen/manage: Always freeze/thaw processes when suspend/resuming

Always freeze processes when suspending and thaw processes when resuming
to prevent a race noticeable with HVM guests.

This prevents a deadlock where the khubd kthread (which is designed to
be freezable) acquires a usb device lock and then tries to allocate
memory which requires the disk which hasn't been resumed yet.
Meanwhile, the xenwatch thread deadlocks waiting for the usb device
lock.

Freezing processes fixes this because the khubd thread is only thawed
after the xenwatch thread finishes resuming all the devices.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: stable@vger.kernel.org

show more ...

xen/manage: fix potential deadlock when resuming the console

Calling xen_console_resume() in xen_suspend() causes a warning because
it locks irq_mapping_update_lock (a mutex) and this may sleep. If

xen/manage: fix potential deadlock when resuming the console

Calling xen_console_resume() in xen_suspend() causes a warning because
it locks irq_mapping_update_lock (a mutex) and this may sleep. If a
userspace process is using the evtchn device then this mutex may be
locked at the point of the stop_machine() call and
xen_console_resume() would then deadlock.

Resuming the console after stop_machine() returns avoids this
deadlock.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>

show more ...

xen: refactor suspend pre/post hooks

New architectures currently have to provide implementations of 5 different
functions: xen_arch_pre_suspend(), xen_arch_post_suspend(),
xen_arch_hvm_post_suspend(

xen: refactor suspend pre/post hooks

New architectures currently have to provide implementations of 5 different
functions: xen_arch_pre_suspend(), xen_arch_post_suspend(),
xen_arch_hvm_post_suspend(), xen_mm_pin_all(), and xen_mm_unpin_all().

Refactor the suspend code to only require xen_arch_pre_suspend() and
xen_arch_post_suspend().

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

show more ...

xen/manage: Poweroff forcefully if user-space is not yet up.

The user can launch the guest in this sequence:

xl create -p /vm.cfg [launch, but pause it]
xl shutdown latest [sets control/shutdown=po

xen/manage: Poweroff forcefully if user-space is not yet up.

The user can launch the guest in this sequence:

xl create -p /vm.cfg [launch, but pause it]
xl shutdown latest [sets control/shutdown=poweroff]
xl unpause latest
xl console latest [and see that the guest has completely
ignored the shutdown request]

In reality the guest hasn't ignored it. It registers a watch
and gets a notification that there is value. It then calls
the shutdown_handler which ends up calling orderly_shutdown.

Unfortunately that is so early in the bootup that there
are no user-space. Which means that the orderly_shutdown fails.
But since the force flag was set to false it continues on without
reporting.

What we really want to is to use the force when we are in the
SYSTEM_BOOTING state and not use the 'force' when SYSTEM_RUNNING.

However, if we are in the running state - and the shutdown command
has been given before the user-space has been setup, there is nothing
we can do. Worst yet, we stop ignoring the 'xl shutdown' requests!

As such, the other part of this patch is to only stop ignoring
the 'xl shutdown' when we are truly in the power off sequence.

That means the user can do multiple 'xl shutdown' and we will try
to act on them instead of ignoring them.

Fixes-Bug: http://bugs.xenproject.org/xen/bug/6
Reported-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

show more ...

xen/acpi-processor: fix enabling interrupts on syscore_resume

syscore->resume() callback is expected to do not enable interrupts,
it generates warning like below otherwise:

[ 9386.365390] WARNING:

xen/acpi-processor: fix enabling interrupts on syscore_resume

syscore->resume() callback is expected to do not enable interrupts,
it generates warning like below otherwise:

[ 9386.365390] WARNING: CPU: 0 PID: 6733 at drivers/base/syscore.c:104 syscore_resume+0x9a/0xe0()
[ 9386.365403] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 [xen_acpi_processor]
...
[ 9386.365429] Call Trace:
[ 9386.365434] [<ffffffff81667a8b>] dump_stack+0x45/0x56
[ 9386.365437] [<ffffffff8106921d>] warn_slowpath_common+0x7d/0xa0
[ 9386.365439] [<ffffffff8106928c>] warn_slowpath_fmt+0x4c/0x50
[ 9386.365442] [<ffffffffa0261bb0>] ? xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor]
[ 9386.365443] [<ffffffff814055fa>] syscore_resume+0x9a/0xe0
[ 9386.365445] [<ffffffff810aef42>] suspend_devices_and_enter+0x402/0x470
[ 9386.365447] [<ffffffff810af128>] pm_suspend+0x178/0x260

On xen_acpi_processor_resume() we call various procedures, which are
non atomic and can enable interrupts. To prevent the issue introduce
separate resume notify called after we enable interrupts on resume
and before we call other drivers resume callbacks.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

show more ...

xen: Remove clock_was_set() call in the resume path

commit 359cdd3f866(xen: maintain clock offset over save/restore) added
a clock_was_set() call into the xen resume code to propagate the
system tim

xen: Remove clock_was_set() call in the resume path

commit 359cdd3f866(xen: maintain clock offset over save/restore) added
a clock_was_set() call into the xen resume code to propagate the
system time changes. With the modified hrtimer resume code, which
makes sure that all cpus are notified this call is not longer necessary.

[ tglx: Separated it from the hrtimer change ]

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/1372329348-20841-2-git-send-email-david.vrabel@citrix.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

xen: Convert printks to pr_<level>

Convert printks to pr_<level> (excludes printk(KERN_DEBUG...)
to be more consistent throughout the xen subsystem.

Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_

xen: Convert printks to pr_<level>

Convert printks to pr_<level> (excludes printk(KERN_DEBUG...)
to be more consistent throughout the xen subsystem.

Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_MODNAME
Coalesce formats and add missing word spaces
Add missing newlines
Align arguments and reflow to 80 columns
Remove DRV_NAME from formats as pr_fmt adds the same content

This does change some of the prefixes of these messages
but it also does make them more consistent.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

show more ...

xen: ifdef CONFIG_HIBERNATE_CALLBACKS xen_*_suspend

xen_hvm_post_suspend, xen_pre_suspend, xen_post_suspend are only used if
CONFIG_HIBERNATE_CALLBACKS is defined, resulting in:

drivers/xen/manage.

xen: ifdef CONFIG_HIBERNATE_CALLBACKS xen_*_suspend

xen_hvm_post_suspend, xen_pre_suspend, xen_post_suspend are only used if
CONFIG_HIBERNATE_CALLBACKS is defined, resulting in:

drivers/xen/manage.c:46:13: warning: ‘xen_hvm_post_suspend’ defined but not used [-Wunused-function]
drivers/xen/manage.c:52:13: warning: ‘xen_pre_suspend’ defined but not used [-Wunused-function]
drivers/xen/manage.c:59:13: warning: ‘xen_post_suspend’ defined but not used [-Wunused-function]

If the kernel config is missing CONFIG_HIBERNATE_CALLBACKS.

Simply ifdef CONFIG_HIBERNATE_CALLBACKS the three functions.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

show more ...

xen/resume: Fix compile warnings.

linux/drivers/xen/manage.c: In function 'do_suspend':
linux/drivers/xen/manage.c:160:5: warning: 'si.cancelled' may be used uninitialized in this function

Signed-o

xen/resume: Fix compile warnings.

linux/drivers/xen/manage.c: In function 'do_suspend':
linux/drivers/xen/manage.c:160:5: warning: 'si.cancelled' may be used uninitialized in this function

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

show more ...