vhost: introduce vDPA-based backend

This patch introduces a vDPA-based vhost backend. This backend is
built on top of the same interface defined in virtio-vDPA and provides
a generic vhost interface

vhost: introduce vDPA-based backend

This patch introduces a vDPA-based vhost backend. This backend is
built on top of the same interface defined in virtio-vDPA and provides
a generic vhost interface for userspace to accelerate the virtio
devices in guest.

This backend is implemented as a vDPA device driver on top of the same
ops used in virtio-vDPA. It will create char device entry named
vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls
on top of this char device to setup the backend.

Vhost ioctls are extended to make it type agnostic and behave like a
virtio device, this help to eliminate type specific API like what
vhost_net/scsi/vsock did:

- VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined
by virtio specification to differ from different type of devices
- VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue
supported by the vDPA device
- VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device
- VHOST_VDPA_SET/GET_CONFIG: access virtio config space
- VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue

For memory mapping, IOTLB API is mandated for vhost-vDPA which means
userspace drivers are required to use
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for
a specific userspace memory region.

The vhost-vDPA API is designed to be type agnostic, but it allows net
device only in current stage. Due to the lacking of control virtqueue
support, some features were filter out by vhost-vdpa.

We will enable more features and devices in the near future.

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

vhost: factor out IOTLB

This patch factors out IOTLB into a dedicated module in order to be
reused by other modules like vringh. User may choose to enable the
automatic retiring by specifying VHOST_

vhost: factor out IOTLB

This patch factors out IOTLB into a dedicated module in order to be
reused by other modules like vringh. User may choose to enable the
automatic retiring by specifying VHOST_IOTLB_FLAG_RETIRE flag to fit
for the case of vhost device IOTLB implementation.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

VSOCK: Add Makefile and Kconfig

Enable virtio-vsock and vhost-vsock.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirki

VSOCK: Add Makefile and Kconfig

Enable virtio-vsock and vhost-vsock.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Revert "Merge branch 'vsock-virtio'"

This reverts commit 0d76d6e8b2507983a2cae4c09880798079007421 and merge
commit c402293bd76fbc93e52ef8c0947ab81eea3ae019, reversing changes made
to c89359a42e2a496

Revert "Merge branch 'vsock-virtio'"

This reverts commit 0d76d6e8b2507983a2cae4c09880798079007421 and merge
commit c402293bd76fbc93e52ef8c0947ab81eea3ae019, reversing changes made
to c89359a42e2a49656451569c382eed63e781153c.

The virtio-vsock device specification is not finalized yet. Michael
Tsirkin voiced concerned about merging this code when the hardware
interface (and possibly the userspace interface) could still change.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

VSOCK: Add Makefile and Kconfig

Enable virtio-vsock and vhost-vsock.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <

VSOCK: Add Makefile and Kconfig

Enable virtio-vsock and vhost-vsock.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vhost: Make vhost a separate module

Currently, vhost-net and vhost-scsi are sharing the vhost core code.
However, vhost-scsi shares the code by including the vhost.c file
directly.

Making vhost a s

vhost: Make vhost a separate module

Currently, vhost-net and vhost-scsi are sharing the vhost core code.
However, vhost-scsi shares the code by including the vhost.c file
directly.

Making vhost a separate module makes it is easier to share code with
other vhost devices.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

vhost_scsi: module rename

Rename module and update Kconfig and Makefile.
Add alias for compatibility with old userspace
scripts if any.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-b

vhost_scsi: module rename

Rename module and update Kconfig and Makefile.
Add alias for compatibility with old userspace
scripts if any.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

vhost: src file renames

Move tcm_vhost.c -> scsi.c

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>

vringh: host-side implementation of virtio rings.

Getting use of virtio rings correct is tricky, and a recent patch saw
an implementation of in-kernel rings (as separate from userspace).

This abstr

vringh: host-side implementation of virtio rings.

Getting use of virtio rings correct is tricky, and a recent patch saw
an implementation of in-kernel rings (as separate from userspace).

This abstracts the business of dealing with the virtio ring layout
from the access (userspace or direct); to do this, we use function
pointers, which gcc inlines correctly.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tcm_vhost: Initial merge for vhost level target fabric driver

This patch adds the initial code for tcm_vhost, a Vhost level TCM
fabric driver for virtio SCSI initiators into KVM guest.

This code is

tcm_vhost: Initial merge for vhost level target fabric driver

This patch adds the initial code for tcm_vhost, a Vhost level TCM
fabric driver for virtio SCSI initiators into KVM guest.

This code is currently up and running on v3.5-rc2 host+guest
from target-pending/for-next-merge.

Using tcm_vhost requires Zhi's -> Stefan -> nab's qemu vhost-scsi tree here:

http://git.kernel.org/?p=virt/kvm/nab/qemu-kvm.git;a=shortlog;h=refs/heads/vhost-scsi

--

Changelog v4 -> v5:

Expose ABI version via VHOST_SCSI_GET_ABI_VERSION + use Rev 0 as
starting point for v3.6-rc code (Stefan + ALiguori + nab)
Convert vhost_scsi_handle_vq() to vq_err() (nab + MST)
Minor style fixes from checkpatch (nab)

Changelog v3 -> v4:

Rename vhost_vring_target -> vhost_scsi_target (mst + nab)
Use TRANSPORT_IQN_LEN in vhost_scsi_target->vhost_wwpn[] def (nab)
Move back to drivers/vhost/, and just use drivers/vhost/Kconfig.tcm (mst)
Move TCM_VHOST related ioctl defines from include/linux/vhost.h ->
drivers/vhost/tcm_vhost.h as requested by MST (nab)
Move Kbuild.tcm include from drivers/staging -> drivers/vhost/, and
just use 'if STAGING' around 'source drivers/vhost/Kbuild.tcm'

Changelog v2 -> v3:

Unlock on error in tcm_vhost_drop_nexus() (DanC)
Fix strlen() doesn't count the terminator (DanC)
Call kfree() on an error path (DanC)
Convert tcm_vhost_write_pending to use target_execute_cmd (hch + nab)
Fix another strlen() off by one in tcm_vhost_make_tport (DanC)
Add option under drivers/staging/Kconfig, and move to drivers/vhost/tcm/
as requested by MST (nab)

Changelog v1 -> v2:

Fix tv_cmd completion -> release SGL memory leak (nab)
Fix sparse warnings for static variable usage ((Fengguang Wu)
Fix sparse warnings for min() typing + printk format specs (Fengguang Wu)
Convert to cmwq submission for I/O dispatch (nab + hch)

Changelog v0 -> v1:

Merge into single source + header file, and move to drivers/vhost/

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Zhi Yong Wu <wuzhy@cn.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

vhost_net: a kernel-level virtio server

What it is: vhost net is a character device that can be used to reduce
the number of system calls involved in virtio networking.
Existing virtio net code is u

vhost_net: a kernel-level virtio server

What it is: vhost net is a character device that can be used to reduce
the number of system calls involved in virtio networking.
Existing virtio net code is used in the guest without modification.

There's similarity with vringfd, with some differences and reduced scope
- uses eventfd for signalling
- structures can be moved around in memory at any time (good for
migration, bug work-arounds in userspace)
- write logging is supported (good for migration)
- support memory table and not just an offset (needed for kvm)

common virtio related code has been put in a separate file vhost.c and
can be made into a separate module if/when more backends appear. I used
Rusty's lguest.c as the source for developing this part : this supplied
me with witty comments I wouldn't be able to write myself.

What it is not: vhost net is not a bus, and not a generic new system
call. No assumptions are made on how guest performs hypercalls.
Userspace hypervisors are supported as well as kvm.

How it works: Basically, we connect virtio frontend (configured by
userspace) to a backend. The backend could be a network device, or a tap
device. Backend is also configured by userspace, including vlan/mac
etc.

Status: This works for me, and I haven't see any crashes.
Compared to userspace, people reported improved latency (as I save up to
4 system calls per packet), as well as better bandwidth and CPU
utilization.

Features that I plan to look at in the future:
- mergeable buffers
- zero copy
- scalability tuning: figure out the best threading model to use

Note on RCU usage (this is also documented in vhost.h, near
private_pointer which is the value protected by this variant of RCU):
what is happening is that the rcu_dereference() is being used in a
workqueue item. The role of rcu_read_lock() is taken on by the start of
execution of the workqueue item, of rcu_read_unlock() by the end of
execution of the workqueue item, and of synchronize_rcu() by
flush_workqueue()/flush_work(). In the future we might need to apply
some gcc attribute or sparse annotation to the function passed to
INIT_WORK(). Paul's ack below is for this RCU usage.

(Includes fixes by Alan Cox <alan@linux.intel.com>,
David L Stevens <dlstevens@us.ibm.com>,
Chris Wright <chrisw@redhat.com>)

Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

vhost: introduce vDPA-based backend

This patch introduces a vDPA-based vhost backend. This backend is
built on top of the same interface defined in virtio-vDPA and provides
a generic

vhost: introduce vDPA-based backend

This patch introduces a vDPA-based vhost backend. This backend is
built on top of the same interface defined in virtio-vDPA and provides
a generic vhost interface for userspace to accelerate the virtio
devices in guest.

This backend is implemented as a vDPA device driver on top of the same
ops used in virtio-vDPA. It will create char device entry named
vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls
on top of this char device to setup the backend.

Vhost ioctls are extended to make it type agnostic and behave like a
virtio device, this help to eliminate type specific API like what
vhost_net/scsi/vsock did:

- VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined
by virtio specification to differ from different type of devices
- VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue
supported by the vDPA device
- VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device
- VHOST_VDPA_SET/GET_CONFIG: access virtio config space
- VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue

For memory mapping, IOTLB API is mandated for vhost-vDPA which means
userspace drivers are required to use
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for
a specific userspace memory region.

The vhost-vDPA API is designed to be type agnostic, but it allows net
device only in current stage. Due to the lacking of control virtqueue
support, some features were filter out by vhost-vdpa.

We will enable more features and devices in the near future.

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

vhost: factor out IOTLB

This patch factors out IOTLB into a dedicated module in order to be
reused by other modules like vringh. User may choose to enable the
automatic retiring by s

vhost: factor out IOTLB

This patch factors out IOTLB into a dedicated module in order to be
reused by other modules like vringh. User may choose to enable the
automatic retiring by specifying VHOST_IOTLB_FLAG_RETIRE flag to fit
for the case of vhost device IOTLB implementation.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

VSOCK: Add Makefile and Kconfig

Enable virtio-vsock and vhost-vsock.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-o

VSOCK: Add Makefile and Kconfig

Enable virtio-vsock and vhost-vsock.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

vhost: Make vhost a separate module

Currently, vhost-net and vhost-scsi are sharing the vhost core code.
However, vhost-scsi shares the code by including the vhost.c file
directly.

vhost: Make vhost a separate module

Currently, vhost-net and vhost-scsi are sharing the vhost core code.
However, vhost-scsi shares the code by including the vhost.c file
directly.

Making vhost a separate module makes it is easier to share code with
other vhost devices.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio & lguest updates from Rusty Russell:
"Lots of virtio work which wasn't quite r

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio & lguest updates from Rusty Russell:
"Lots of virtio work which wasn't quite ready for last merge window.

Plus I dived into lguest again, reworking the pagetable code so we can
move the switcher page: our fixmaps sometimes take more than 2MB now..."

Ugh. Annoying conflicts with the tcm_vhost -> vhost_scsi rename.
Hopefully correctly resolved.

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (57 commits)
caif_virtio: Remove bouncing email addresses
lguest: improve code readability in lg_cpu_start.
virtio-net: fill only rx queues which are being used
lguest: map Switcher below fixmap.
lguest: cache last cpu we ran on.
lguest: map Switcher text whenever we allocate a new pagetable.
lguest: don't share Switcher PTE pages between guests.
lguest: expost switcher_pages array (as lg_switcher_pages).
lguest: extract shadow PTE walking / allocating.
lguest: make check_gpte et. al return bool.
lguest: assume Switcher text is a single page.
lguest: rename switcher_page to switcher_pages.
lguest: remove RESERVE_MEM constant.
lguest: check vaddr not pgd for Switcher protection.
lguest: prepare to make SWITCHER_ADDR a variable.
virtio: console: replace EMFILE with EBUSY for already-open port
virtio-scsi: reset virtqueue affinity when doing cpu hotplug
virtio-scsi: introduce multiqueue support
virtio-scsi: push vq lock/unlock into virtscsi_vq_done
virtio-scsi: pass struct virtio_scsi to virtqueue completion function
...

show more ...

vhost_scsi: module rename

Rename module and update Kconfig and Makefile.
Add alias for compatibility with old userspace
scripts if any.

Signed-off-by: Michael S. Tsirkin <ms

vhost_scsi: module rename

Rename module and update Kconfig and Makefile.
Add alias for compatibility with old userspace
scripts if any.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

vhost: src file renames

Move tcm_vhost.c -> scsi.c

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Acked-by: Nicholas Bellinger <

vhost: src file renames

Move tcm_vhost.c -> scsi.c

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

vringh: host-side implementation of virtio rings.

Getting use of virtio rings correct is tricky, and a recent patch saw
an implementation of in-kernel rings (as separate from userspace).

vringh: host-side implementation of virtio rings.

Getting use of virtio rings correct is tricky, and a recent patch saw
an implementation of in-kernel rings (as separate from userspace).

This abstracts the business of dealing with the virtio ring layout
from the access (userspace or direct); to do this, we use function
pointers, which gcc inlines correctly.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tcm_vhost: Initial merge for vhost level target fabric driver

This patch adds the initial code for tcm_vhost, a Vhost level TCM
fabric driver for virtio SCSI initiators into KVM guest.

tcm_vhost: Initial merge for vhost level target fabric driver

This patch adds the initial code for tcm_vhost, a Vhost level TCM
fabric driver for virtio SCSI initiators into KVM guest.

This code is currently up and running on v3.5-rc2 host+guest
from target-pending/for-next-merge.

Using tcm_vhost requires Zhi's -> Stefan -> nab's qemu vhost-scsi tree here:

http://git.kernel.org/?p=virt/kvm/nab/qemu-kvm.git;a=shortlog;h=refs/heads/vhost-scsi

--

Changelog v4 -> v5:

Expose ABI version via VHOST_SCSI_GET_ABI_VERSION + use Rev 0 as
starting point for v3.6-rc code (Stefan + ALiguori + nab)
Convert vhost_scsi_handle_vq() to vq_err() (nab + MST)
Minor style fixes from checkpatch (nab)

Changelog v3 -> v4:

Rename vhost_vring_target -> vhost_scsi_target (mst + nab)
Use TRANSPORT_IQN_LEN in vhost_scsi_target->vhost_wwpn[] def (nab)
Move back to drivers/vhost/, and just use drivers/vhost/Kconfig.tcm (mst)
Move TCM_VHOST related ioctl defines from include/linux/vhost.h ->
drivers/vhost/tcm_vhost.h as requested by MST (nab)
Move Kbuild.tcm include from drivers/staging -> drivers/vhost/, and
just use 'if STAGING' around 'source drivers/vhost/Kbuild.tcm'

Changelog v2 -> v3:

Unlock on error in tcm_vhost_drop_nexus() (DanC)
Fix strlen() doesn't count the terminator (DanC)
Call kfree() on an error path (DanC)
Convert tcm_vhost_write_pending to use target_execute_cmd (hch + nab)
Fix another strlen() off by one in tcm_vhost_make_tport (DanC)
Add option under drivers/staging/Kconfig, and move to drivers/vhost/tcm/
as requested by MST (nab)

Changelog v1 -> v2:

Fix tv_cmd completion -> release SGL memory leak (nab)
Fix sparse warnings for static variable usage ((Fengguang Wu)
Fix sparse warnings for min() typing + printk format specs (Fengguang Wu)
Convert to cmwq submission for I/O dispatch (nab + hch)

Changelog v0 -> v1:

Merge into single source + header file, and move to drivers/vhost/

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Zhi Yong Wu <wuzhy@cn.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

vhost_net: a kernel-level virtio server

What it is: vhost net is a character device that can be used to reduce
the number of system calls involved in virtio networking.
Existing virt

vhost_net: a kernel-level virtio server

What it is: vhost net is a character device that can be used to reduce
the number of system calls involved in virtio networking.
Existing virtio net code is used in the guest without modification.

There's similarity with vringfd, with some differences and reduced scope
- uses eventfd for signalling
- structures can be moved around in memory at any time (good for
migration, bug work-arounds in userspace)
- write logging is supported (good for migration)
- support memory table and not just an offset (needed for kvm)

common virtio related code has been put in a separate file vhost.c and
can be made into a separate module if/when more backends appear. I used
Rusty's lguest.c as the source for developing this part : this supplied
me with witty comments I wouldn't be able to write myself.

What it is not: vhost net is not a bus, and not a generic new system
call. No assumptions are made on how guest performs hypercalls.
Userspace hypervisors are supported as well as kvm.

How it works: Basically, we connect virtio frontend (configured by
userspace) to a backend. The backend could be a network device, or a tap
device. Backend is also configured by userspace, including vlan/mac
etc.

Status: This works for me, and I haven't see any crashes.
Compared to userspace, people reported improved latency (as I save up to
4 system calls per packet), as well as better bandwidth and CPU
utilization.

Features that I plan to look at in the future:
- mergeable buffers
- zero copy
- scalability tuning: figure out the best threading model to use

Note on RCU usage (this is also documented in vhost.h, near
private_pointer which is the value protected by this variant of RCU):
what is happening is that the rcu_dereference() is being used in a
workqueue item. The role of rcu_read_lock() is taken on by the start of
execution of the workqueue item, of rcu_read_unlock() by the end of
execution of the workqueue item, and of synchronize_rcu() by
flush_workqueue()/flush_work(). In the future we might need to apply
some gcc attribute or sparse annotation to the function passed to
INIT_WORK(). Paul's ack below is for this RCU usage.

(Includes fixes by Alan Cox <alan@linux.intel.com>,
David L Stevens <dlstevens@us.ibm.com>,
Chris Wright <chrisw@redhat.com>)

Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...