usb: ehci-mv: Use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
w

usb: ehci-mv: Use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230726113816.888-26-frank.li@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: ehci-mv: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error

usb: ehci-mv: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230517230239.187727-51-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: host: ehci-mv: drop duplicated MODULE_ALIAS

There is one MODULE_ALIAS already.

Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.co

usb: host: ehci-mv: drop duplicated MODULE_ALIAS

There is one MODULE_ALIAS already.

Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210916170531.138335-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable()

mv_ehci_enable() did not disable and unprepare clocks in case of
failures of phy_init(). Besides, it did not take into account failures

USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable()

mv_ehci_enable() did not disable and unprepare clocks in case of
failures of phy_init(). Besides, it did not take into account failures
of ehci_clock_enable() (in effect, failures of clk_prepare_enable()).
The patch fixes both issues and gets rid of redundant wrappers around
clk_prepare_enable() and clk_disable_unprepare() to simplify this a bit.

Found by Linux Driver Verification project (linuxtesting.org).

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Link: https://lore.kernel.org/r/20210708083056.21543-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable()

[ Upstream commit 61136a12cbed234374ec6f588af57c580b20b772 ]

mv_ehci_enable() did not disable and unprepare clocks in case of
failures

USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable()

[ Upstream commit 61136a12cbed234374ec6f588af57c580b20b772 ]

mv_ehci_enable() did not disable and unprepare clocks in case of
failures of phy_init(). Besides, it did not take into account failures
of ehci_clock_enable() (in effect, failures of clk_prepare_enable()).
The patch fixes both issues and gets rid of redundant wrappers around
clk_prepare_enable() and clk_disable_unprepare() to simplify this a bit.

Found by Linux Driver Verification project (linuxtesting.org).

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Link: https://lore.kernel.org/r/20210708083056.21543-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int

The comparison of hcd->irq to less than zero for an error check will
never be true because hcd->irq is an unsigned int. Fix this

USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int

The comparison of hcd->irq to less than zero for an error check will
never be true because hcd->irq is an unsigned int. Fix this by
assigning the int retval to the return of platform_get_irq and checking
this for the -ve error condition and assigning hcd->irq to retval.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: c856b4b0fdb5 ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mv_ehci_probe().

USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mv_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: Fix unused assignment in mv_ehci_probe()

Delete unused initialized value, because 'retval' will be assigined
by the function mv_ehci_enable(). And delete the extra blank lines.

USB: EHCI: ehci-mv: Fix unused assignment in mv_ehci_probe()

Delete unused initialized value, because 'retval' will be assigined
by the function mv_ehci_enable(). And delete the extra blank lines.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200508142136.4232-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: use a unique bus name

In case there are multiple Marvell EHCI blocks in system, we need a
different bus name for each one. Otherwise debugfs gets mildly upset about
a directory n

USB: EHCI: ehci-mv: use a unique bus name

In case there are multiple Marvell EHCI blocks in system, we need a
different bus name for each one. Otherwise debugfs gets mildly upset about
a directory name in usb/ehci:

debugfs: Directory 'mv ehci' with parent 'ehci' already present!

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200309130014.548168-2-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: switch the HSIC HCI to HSIC mode

Turns out the undocumented and reserved bits of port status/control
register of the root port need to be set to use the HCI in HSIC mode.

Typica

USB: EHCI: ehci-mv: switch the HSIC HCI to HSIC mode

Turns out the undocumented and reserved bits of port status/control
register of the root port need to be set to use the HCI in HSIC mode.

Typically the firmware does this, but that is not always good enough,
because the bits get lost if the HSIC clock is disabled (e.g. when
ehci-mv is build as a module).

This supplements commit 7b104f890ade ("USB: EHCI: ehci-mv: add HSIC
support").

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200309130014.548168-1-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: ehci-mv: Fix missing iomem in cast

Fix missing __iomem in cast to struct ehci_caps. This fixes the Sparse
warning visible on x86_64 compile test:

drivers/usb/host/ehci-mv.c:167:23: warning

usb: ehci-mv: Fix missing iomem in cast

Fix missing __iomem in cast to struct ehci_caps. This fixes the Sparse
warning visible on x86_64 compile test:

drivers/usb/host/ehci-mv.c:167:23: warning: cast removes address space '<asn:2>' of expression
drivers/usb/host/ehci-mv.c:167:20: warning: incorrect type in assignment (different address spaces)
drivers/usb/host/ehci-mv.c:167:20: expected struct ehci_caps [noderef] <asn:2> *caps
drivers/usb/host/ehci-mv.c:167:20: got struct ehci_caps *

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200103164031.4089-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: add HSIC support

Some special dance is needed to initialize the HSIC port.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link:

USB: EHCI: ehci-mv: add HSIC support

Some special dance is needed to initialize the HSIC port.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191221065008.266445-2-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: drop pxa_ehci_type and some device IDs

This is merely a cleanup. None of these is used anywhere.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowla

USB: EHCI: ehci-mv: drop pxa_ehci_type and some device IDs

This is merely a cleanup. None of these is used anywhere.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191221065008.266445-4-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: make the PHY optional

We may be using a NOP transceiver and those are treated specially by the
USB core and return -ENODEV with devm_phy_get().

Signed-off-by: Lubomir Rintel <lk

USB: EHCI: ehci-mv: make the PHY optional

We may be using a NOP transceiver and those are treated specially by the
USB core and return -ENODEV with devm_phy_get().

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191221065008.266445-3-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE

This fixes autoloading the module by the OF compatible string.

Fixes: 813e18b18a87 ("USB: EHCI: ehci-mv: add DT support")
Cc: stable@vger.kernel.org
Sign

USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE

This fixes autoloading the module by the OF compatible string.

Fixes: 813e18b18a87 ("USB: EHCI: ehci-mv: add DT support")
Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: add DT support

Add Device tree support.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh

USB: EHCI: ehci-mv: add DT support

Add Device tree support.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: use phy-pxa-usb

Use a proper PHY driver, instead of hooks to a board support package.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.

USB: EHCI: ehci-mv: use phy-pxa-usb

Use a proper PHY driver, instead of hooks to a board support package.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: ehci-mv: remove private_init

It's unused.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxf

USB: EHCI: ehci-mv: remove private_init

It's unused.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: EHCI: make ehci-mv a separate driver

This is done do that it could be enabled alongside other platform EHCI
glue drivers on multiplatform kernels.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk

USB: EHCI: make ehci-mv a separate driver

This is done do that it could be enabled alongside other platform EHCI
glue drivers on multiplatform kernels.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: host: ehci: Remove redundant license text

Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be

USB: host: ehci: Remove redundant license text

Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: add SPDX identifiers to all remaining files in drivers/usb/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/

USB: add SPDX identifiers to all remaining files in drivers/usb/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/usb/ and include/linux/usb* files with the correct
SPDX license identifier based on the license text in the file itself.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

host: ehci-mv: remove duplicate check on resource

Sanity check on resource happening with devm_ioremap_resource().

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Acked-by: Alan Stern <stern@rowland.

host: ehci-mv: remove duplicate check on resource

Sanity check on resource happening with devm_ioremap_resource().

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: host: ehci-mv: delete unnecessary 'out of memory' messages

The memory subsystem has already had similar message for it.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg

usb: host: ehci-mv: delete unnecessary 'out of memory' messages

The memory subsystem has already had similar message for it.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: host: ehci-mv: Use devm_ioremap_resource instead of devm_ioremap

Using devm_ioremap_resource() API should actually be preferred over
devm_ioremap(), since the former request the mem region firs

usb: host: ehci-mv: Use devm_ioremap_resource instead of devm_ioremap

Using devm_ioremap_resource() API should actually be preferred over
devm_ioremap(), since the former request the mem region first and then
gives back the ioremap'ed memory pointer.
devm_ioremap_resource() calls request_mem_region(), therby preventing
other drivers to make any overlapping call to the same region.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: hcd: move controller wakeup setting initialization to individual driver

Individual controller driver has different requirement for wakeup
setting, so move it from core to itself. In order to al

usb: hcd: move controller wakeup setting initialization to individual driver

Individual controller driver has different requirement for wakeup
setting, so move it from core to itself. In order to align with
current etting the default wakeup setting is enabled (except for
chipidea host).

Pass compile test with below commands:
make O=outout/all allmodconfig
make -j$CPU_NUM O=outout/all drivers/usb

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...