usb: chipidea: add workaround for chipidea PEC bug

Some NXP processors using ChipIdea USB IP have a bug when frame babble is
detected.

Issue description:
In USB camera test, our controller is host

usb: chipidea: add workaround for chipidea PEC bug

Some NXP processors using ChipIdea USB IP have a bug when frame babble is
detected.

Issue description:
In USB camera test, our controller is host in HS mode. In ISOC IN, when
device sends data across the micro frame, it causes the babble in host
controller. This will clear the PE bit. In spec, it also requires to set
the PEC bit and then set the PCI bit. Without the PCI interrupt, the
software does not know the PE is cleared.

This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted
platform datas. And the ehci host driver will assert PEC by SW when
specific conditions are satisfied.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: imx: add one fsl picophy parameter tuning implementation

In some cases, the user may need to tune the rise/fall time of the
high-speed transmitter waveform for USB Certification. This

usb: chipidea: imx: add one fsl picophy parameter tuning implementation

In some cases, the user may need to tune the rise/fall time of the
high-speed transmitter waveform for USB Certification. This will add
a parameter for this purpose. The value will be fetched from dtb and
finally written to the register.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230627112126.1882666-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0

In current driver, the value of tuning parameter will not take effect
if samsung,picophy-* is assigned as 0. Because 0 is also a

usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0

In current driver, the value of tuning parameter will not take effect
if samsung,picophy-* is assigned as 0. Because 0 is also a valid value
acccording to the description of USB_PHY_CFG1 register, this will improve
the logic to let it work.

Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that mer

usb: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: imx: don't request QoS for imx8ulp

Use dedicated imx8ulp usb compatible to remove QoS request
since imx8ulp has no such limitation of imx7ulp: DMA will
not work if system enters idle.

usb: chipidea: imx: don't request QoS for imx8ulp

Use dedicated imx8ulp usb compatible to remove QoS request
since imx8ulp has no such limitation of imx7ulp: DMA will
not work if system enters idle.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230530104007.1294702-2-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea/ci_hdrc_imx: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible

usb: chipidea/ci_hdrc_imx: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230517230239.187727-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: Use of_property_read_bool() for boolean properties

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_

usb: Use of_property_read_bool() for boolean properties

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20230310144729.1545857-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: use dev_err_probe

Add error message if finding USB PHY fails or is deferred.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.o

usb: chipidea: ci_hdrc_imx: use dev_err_probe

Add error message if finding USB PHY fails or is deferred.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230130094151.95174-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: Fix a typo ("regualator")

Change "regualator" to "regulator" in this comment.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Mukesh Ojha <quic_m

usb: chipidea: ci_hdrc_imx: Fix a typo ("regualator")

Change "regualator" to "regulator" in this comment.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20221104095838.2132945-1-j.neuschaefer@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: usbmisc: group usbmisc operations for PM

As there maybe more APIs of usbmisc for suspend and resume, group
them into imx_usbmisc_suspend/resume. Besides, introduced .power_lost_check

usb: chipidea: usbmisc: group usbmisc operations for PM

As there maybe more APIs of usbmisc for suspend and resume, group
them into imx_usbmisc_suspend/resume. Besides, introduced .power_lost_check
API, so that proper resume operations can be performed in power lost case.

Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20221013151442.3262951-6-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: use dev_err_probe()

Use dev_err_probe() to simplify handling errors in ci_hdrc_imx_probe()

Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Alexander Stein <a

usb: chipidea: ci_hdrc_imx: use dev_err_probe()

Use dev_err_probe() to simplify handling errors in ci_hdrc_imx_probe()

Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220614120522.1469957-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe

If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0)
fails with something other than -ENODEV then it le

usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe

If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0)
fails with something other than -ENODEV then it leads to an error
pointer dereference. For those errors we should just jump directly to
the error handling.

Fixes: 8253a34bfae3 ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211117074923.GF5237@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe

commit d4d2e5329ae9dfd6742c84d79f7d143d10410f1b upstream.

If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usb

usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe

commit d4d2e5329ae9dfd6742c84d79f7d143d10410f1b upstream.

If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0)
fails with something other than -ENODEV then it leads to an error
pointer dereference. For those errors we should just jump directly to
the error handling.

Fixes: 8253a34bfae3 ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211117074923.GF5237@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle

When passing 'phys' in the devicetree to describe the USB PHY phandle
(which is the recommended way according to
Documentation/devicetree/b

usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle

When passing 'phys' in the devicetree to describe the USB PHY phandle
(which is the recommended way according to
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the
following NULL pointer dereference is observed on i.MX7 and i.MX8MM:

[ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[ 1.498170] Mem abort info:
[ 1.500966] ESR = 0x96000044
[ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.509356] SET = 0, FnV = 0
[ 1.512416] EA = 0, S1PTW = 0
[ 1.515569] FSC = 0x04: level 0 translation fault
[ 1.520458] Data abort info:
[ 1.523349] ISV = 0, ISS = 0x00000044
[ 1.527196] CM = 0, WnR = 1
[ 1.530176] [0000000000000098] user address but active_mm is swapper
[ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[ 1.542125] Modules linked in:
[ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3
[ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT)
[ 1.557133] Workqueue: events_unbound deferred_probe_work_func
[ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510
[ 1.573973] lr : imx7d_charger_detection+0x22c/0x510

This happens because the charger functions check for the phy presence
inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea
core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc'
(ci->usb_phy) instead.

This causes the NULL pointer dereference inside imx7d_charger_detection().

Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found.

Tested on a imx7s-warp board.

Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection")
Cc: stable@vger.kernel.org
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921113754.767631-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()

if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have
a corresponding put_device(). Thus add

usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()

if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.

Fixes: ef12da914ed6 ("usb: chipidea: imx: properly check for usbmisc")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()

The retrieval of driver data via of_device_get_match_data() can make
the code simpler.

Use of_device_get_match_data() to simplify the code

usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()

The retrieval of driver data via of_device_get_match_data() can make
the code simpler.

Use of_device_get_match_data() to simplify the code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>

show more ...

usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul

According to the i.MX6UL Errata document:
https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf

ERR007881 also affects i.MX6UL, so

usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul

According to the i.MX6UL Errata document:
https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf

ERR007881 also affects i.MX6UL, so pass the
CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue.

Fixes: 52fe568e5d71 ("usb: chipidea: imx: add imx6ul usb support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20201207020909.22483-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()

commit 83a43ff80a566de8718dfc6565545a0080ec1fb5 upstream.

if of_find_device_by_node() succeed, usbmisc_get_init_

usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()

commit 83a43ff80a566de8718dfc6565545a0080ec1fb5 upstream.

if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.

Fixes: ef12da914ed6 ("usb: chipidea: imx: properly check for usbmisc")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul

commit c7721e15f434920145c376e8fe77e1c079fc3726 upstream.

According to the i.MX6UL Errata document:
https://www.nxp.com/docs

usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul

commit c7721e15f434920145c376e8fe77e1c079fc3726 upstream.

According to the i.MX6UL Errata document:
https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf

ERR007881 also affects i.MX6UL, so pass the
CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue.

Fixes: 52fe568e5d71 ("usb: chipidea: imx: add imx6ul usb support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20201207020909.22483-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: chipidea: ci_hdrc_imx: restore pinctrl

The pinctrl setting may lost during the system suspend
(eg, imx7ulp), it needs to restore them after system resume.
Meanwhile, some platforms may need to

usb: chipidea: ci_hdrc_imx: restore pinctrl

The pinctrl setting may lost during the system suspend
(eg, imx7ulp), it needs to restore them after system resume.
Meanwhile, some platforms may need to set special pinctrl
for power comsumption.

Signed-off-by: Peter Chen <peter.chen@nxp.com>

show more ...

usb: chipidea: imx: add two samsung picophy parameters tuning implementation

These two parameters are used to improve USB signal for board level,
in this commit, we read it from the dtb, and write t

usb: chipidea: imx: add two samsung picophy parameters tuning implementation

These two parameters are used to improve USB signal for board level,
in this commit, we read it from the dtb, and write to related register
during the initialization.

Signed-off-by: Peter Chen <peter.chen@nxp.com>

show more ...

usb: chipidea: imx: get available runtime dr mode for wakeup setting

If runtime dr_mode is not dual-role, it doesn't need to enable ID
wakeup interrupt.
If runtime dr_mode is host, it doesn't need t

usb: chipidea: imx: get available runtime dr mode for wakeup setting

If runtime dr_mode is not dual-role, it doesn't need to enable ID
wakeup interrupt.
If runtime dr_mode is host, it doesn't need to enable VBUS
wakeup interrupt.
With these changes, the user will not get the unexpected wakeup
for single role use case. For example, the host-only use case at
Micro-AB port, the controller should not be waken up by only
plug in Micro-AB cable or the Micro-B cable with host.
Signed-off-by: Peter Chen <peter.chen@nxp.com>

show more ...

usb: chipidea: introduce imx7d USB charger detection

imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver.
The USB generic PHY driver is impossible to have a charger detection
for

usb: chipidea: introduce imx7d USB charger detection

imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver.
The USB generic PHY driver is impossible to have a charger detection
for every user, so we implement USB charger detection routine at glue
layer. After the detection has finished, it will notify USB PHY
charger framework, and the uevents will be triggered.

Signed-off-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>

show more ...

drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*()

Call cpu_latency_qos_add/remove_request() instead of
pm_qos_add/remove_request(), respectively, because the
latter are going to be droppe

drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*()

Call cpu_latency_qos_add/remove_request() instead of
pm_qos_add/remove_request(), respectively, because the
latter are going to be dropped.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>

show more ...

usb: chipidea: imx: pinctrl for HSIC is optional

For imx chipidea controllers, if they use mxs PHY, they need pinctrl
for HSIC. Otherwise, it doesn't need pinctrl and usbmisc control. Like
imx7d and

usb: chipidea: imx: pinctrl for HSIC is optional

For imx chipidea controllers, if they use mxs PHY, they need pinctrl
for HSIC. Otherwise, it doesn't need pinctrl and usbmisc control. Like
imx7d and imx8mm.

Reported-by: André Draszik <git@andred.net>
Signed-off-by: Peter Chen <peter.chen@nxp.com>

show more ...