Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31 |
|
#
3a03ef31 |
| 14-May-2024 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
[ Upstream commit 87d80bfbd577912462061b1a45c0ed9c7fcb872f ]
The container of the struct dw8250_port_data is private to the actual d
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
[ Upstream commit 87d80bfbd577912462061b1a45c0ed9c7fcb872f ]
The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver.
Currently the only cpr_val is required by the common code, make it be available via struct dw8250_port_data.
This fixes the UART breakage on Intel Galileo boards.
Fixes: 593dea000bc1 ("serial: 8250: dw: Allow to use a fallback CPR value if not synthesized") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240514190730.2787071-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v6.6.35, v6.6.34, v6.6.33, v6.6.32, v6.6.31 |
|
#
3a03ef31 |
| 14-May-2024 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
[ Upstream commit 87d80bfbd577912462061b1a45c0ed9c7fcb872f ]
The container of the struct dw8250_port_data is private to the actual d
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
[ Upstream commit 87d80bfbd577912462061b1a45c0ed9c7fcb872f ]
The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver.
Currently the only cpr_val is required by the common code, make it be available via struct dw8250_port_data.
This fixes the UART breakage on Intel Galileo boards.
Fixes: 593dea000bc1 ("serial: 8250: dw: Allow to use a fallback CPR value if not synthesized") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240514190730.2787071-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v6.6.30, v6.6.29, v6.6.28, v6.6.27, v6.6.26, v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39 |
|
#
748c5ea8 |
| 12-Jul-2023 |
Ruihong Luo <colorsu1922@gmail.com> |
serial: 8250_dw: Preserve original value of DLF register
Preserve the original value of the Divisor Latch Fraction (DLF) register. When the DLF register is modified without preservation, it can disr
serial: 8250_dw: Preserve original value of DLF register
Preserve the original value of the Divisor Latch Fraction (DLF) register. When the DLF register is modified without preservation, it can disrupt the baudrate settings established by firmware or bootloader, leading to data corruption and the generation of unreadable or distorted characters.
Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support") Cc: stable <stable@kernel.org> Signed-off-by: Ruihong Luo <colorsu1922@gmail.com> Link: https://lore.kernel.org/stable/20230713004235.35904-1-colorsu1922%40gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230713004235.35904-1-colorsu1922@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61 |
|
#
bec5b814 |
| 16-Aug-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
serial: Make ->set_termios() old ktermios const
There should be no reason to adjust old ktermios which is going to get discarded anyway.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Sig
serial: Make ->set_termios() old ktermios const
There should be no reason to adjust old ktermios which is going to get discarded anyway.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54 |
|
#
c64e1758 |
| 10-Jul-2022 |
Lino Sanfilippo <l.sanfilippo@kunbus.com> |
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
Before the drivers rs485_config() function is called the serial core already ensures that only one of both options RTS on send or RT
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
Before the drivers rs485_config() function is called the serial core already ensures that only one of both options RTS on send or RTS after send is set. So remove the concerning sanity check in the driver function to avoid redundancy.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20220710164442.2958979-8-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.53 |
|
#
0139da50 |
| 04-Jul-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
serial: Embed rs485_supported to uart_port
Embed rs485_supported to uart_port to allow serial core to tweak it as needed.
Reviewed-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Signed-off-by: Ilpo
serial: Embed rs485_supported to uart_port
Embed rs485_supported to uart_port to allow serial core to tweak it as needed.
Reviewed-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220704094515.6831-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.52 |
|
#
e9f97366 |
| 30-Jun-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
8250_dwlib: Convert bitops to newer form
Instead of open-coding, use BIT(), GENMASK(), and FIELD_GET() helpers.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen
8250_dwlib: Convert bitops to newer form
Instead of open-coding, use BIT(), GENMASK(), and FIELD_GET() helpers.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220630100536.41329-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.51, v5.15.50 |
|
#
f287f971 |
| 24-Jun-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
serial: 8250_dwlib: Support for 9th bit multipoint addressing
Add 9th bit multipoint addressing mode for DW UART. 9th bit addressing can be used only when HW RS485 is available.
Updating RAR (recei
serial: 8250_dwlib: Support for 9th bit multipoint addressing
Add 9th bit multipoint addressing mode for DW UART. 9th bit addressing can be used only when HW RS485 is available.
Updating RAR (receive address register) is bit tricky because busy indication is not be available when DW UART is strictly 16550 compatible, which is the case with the hardware I was testing with. RAR should not be updated while receive is in progress which is now achieved by deasserting RE and waiting for one frame (in case rx would be in progress, the driver seems to have no way of knowing it w/o busy indication). Because of this complexity, it's better to avoid doing it unless really needed.
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Raymond Tan <raymond.tan@intel.com> Co-developed-by: Lakshmi Sowjanya <lakshmi.sowjanya.d@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Lakshmi Sowjanya <lakshmi.sowjanya.d@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
ae50bb27 |
| 24-Jun-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
serial: take termios_rwsem for ->rs485_config() & pass termios as param
To be able to alter ADDRB within ->rs485_config(), take termios_rwsem before calling ->rs485_config() and pass termios.
Signe
serial: take termios_rwsem for ->rs485_config() & pass termios as param
To be able to alter ADDRB within ->rs485_config(), take termios_rwsem before calling ->rs485_config() and pass termios.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.49, v5.15.48, v5.15.47, v5.15.46 |
|
#
9cdaf4fc |
| 06-Jun-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
serial: 8250_dwlib: Remove serial_rs485 sanitization
Serial core handles serial_rs485 sanitization and rs485 struct assignment. As serial_rs485 is already clear for the non-RS485 case by serial core
serial: 8250_dwlib: Remove serial_rs485 sanitization
Serial core handles serial_rs485 sanitization and rs485 struct assignment. As serial_rs485 is already clear for the non-RS485 case by serial core, there no need to clear flags in the driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-26-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
62a4b3d2 |
| 06-Jun-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
serial: 8250_dwlib: Fill in rs485_supported
Add information on supported serial_rs485 features. When the driver is using em485, take advantage of serial8250_em485_supported.
Signed-off-by: Ilpo Jär
serial: 8250_dwlib: Fill in rs485_supported
Add information on supported serial_rs485 features. When the driver is using em485, take advantage of serial8250_em485_supported.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36 |
|
#
5ff33917 |
| 26-Apr-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
serial: 8250_dwlib: Implement SW half duplex support
This patch enables support for SW half-duplex mode using em485.
Cc: Eric Tremblay <etremblay@distech-controls.com> Cc: Uwe Kleine-König <u.klein
serial: 8250_dwlib: Implement SW half duplex support
This patch enables support for SW half-duplex mode using em485.
Cc: Eric Tremblay <etremblay@distech-controls.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220426122448.38997-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
642aa760 |
| 26-Apr-2022 |
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
serial: 8250_dwlib: RS485 HW half & full duplex support
The Synopsys DesignWare UART can be configured to have HW support for the RS485 protocol from IP version 4.0 onward. Add support for hardware-
serial: 8250_dwlib: RS485 HW half & full duplex support
The Synopsys DesignWare UART can be configured to have HW support for the RS485 protocol from IP version 4.0 onward. Add support for hardware-controlled half duplex and full duplex modes.
HW will take care of managing DE and RE, the driver just gives it permission to use either by setting both to 1.
To ask for full duplex mode, userspace sets SER_RS485_RX_DURING_TX flag and HW will take care of the rest.
Set delay_rts_before_send and delay_rts_after_send to zero for now. The granularity of that ABI is too coarse to be useful.
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220426122448.38997-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
c9c23d01 |
| 22-Apr-2022 |
Miquel Raynal <miquel.raynal@bootlin.com> |
serial: 8250: dw: Move the IO accessors to 8250_dwlib.h
These accessors should be used instead of the regular readl/writel() helpers. In order to use them also from 8250_dw.c in this directory, move
serial: 8250: dw: Move the IO accessors to 8250_dwlib.h
These accessors should be used instead of the regular readl/writel() helpers. In order to use them also from 8250_dw.c in this directory, move the helpers to 8250_dwlib.h
There is no functional change.
There is no need for declaring `struct uart_port` or even UPIO_MEM32BE which both are already included in the 8250_dwlib.h header by 8250.h.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220422180615.9098-8-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
593dea00 |
| 22-Apr-2022 |
Miquel Raynal <miquel.raynal@bootlin.com> |
serial: 8250: dw: Allow to use a fallback CPR value if not synthesized
DW UART controllers can be synthesized without the CPR register. In this case, allow to the platform information to provide a C
serial: 8250: dw: Allow to use a fallback CPR value if not synthesized
DW UART controllers can be synthesized without the CPR register. In this case, allow to the platform information to provide a CPR value.
Co-developed-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220422180615.9098-5-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10 |
|
#
7c4fc082 |
| 05-Oct-2021 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
serial: 8250_lpss: Extract dw8250_do_set_termios() for common use
Some of the code currently used in dw8250_set_termios(), byt_set_termios() may be reused by other methods in the future. Extract it
serial: 8250_lpss: Extract dw8250_do_set_termios() for common use
Some of the code currently used in dw8250_set_termios(), byt_set_termios() may be reused by other methods in the future. Extract it to a common helper function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005133026.21488-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7 |
|
#
136e0ab9 |
| 06-Aug-2019 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
serial: 8250_dw: split Synopsys DesignWare 8250 common functions
We would like to use same functions in the couple of drivers for Synopsys DesignWare 8250 UART. Split them from 8250_dw into new bran
serial: 8250_dw: split Synopsys DesignWare 8250 common functions
We would like to use same functions in the couple of drivers for Synopsys DesignWare 8250 UART. Split them from 8250_dw into new brand library module which users will select explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190806094322.64987-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7 |
|
#
136e0ab9 |
| 06-Aug-2019 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
serial: 8250_dw: split Synopsys DesignWare 8250 common functions We would like to use same functions in the couple of drivers for Synopsys DesignWare 8250 UART. Split them from 8250_dw i
serial: 8250_dw: split Synopsys DesignWare 8250 common functions We would like to use same functions in the couple of drivers for Synopsys DesignWare 8250 UART. Split them from 8250_dw into new brand library module which users will select explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190806094322.64987-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|