thermal: Use thermal_tripless_zone_device_register()

All of the remaining callers of thermal_zone_device_register()
can use thermal_tripless_zone_device_register(), so make them
do so in order to al

thermal: Use thermal_tripless_zone_device_register()

All of the remaining callers of thermal_zone_device_register()
can use thermal_tripless_zone_device_register(), so make them
do so in order to allow the former to be dropped.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>

show more ...

thermal/drivers/int340x: Do not check the thermal zone state

The driver is accessing the thermal zone state to ensure the state is
different from the one we want to set.

We don't want the driver to

thermal/drivers/int340x: Do not check the thermal zone state

The driver is accessing the thermal zone state to ensure the state is
different from the one we want to set.

We don't want the driver to access the thermal zone device internals.

Actually, the thermal core code already checks if the thermal zone's
state is different before calling this function, thus this check is
duplicate.

Remove it.

Acked-by: srinivas pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal/drivers/int3400: Use thermal zone device wrappers

Use the thermal core API to access the thermal zone "type" field
instead of directly using the structure field. While here, remove
access t

thermal/drivers/int3400: Use thermal zone device wrappers

Use the thermal core API to access the thermal zone "type" field
instead of directly using the structure field. While here, remove
access to the temperature field, as this driver is reporting fake
temperature, which can be replaced with INT3400_FAKE_TEMP. Also
replace hardcoded 20C with INT3400_FAKE_TEMP

Acked-by: srinivas pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: intel: int340x: Add new line for UUID display

Prior to the commit "763bd29fd3d1 ("thermal: int340x_thermal: Use
sysfs_emit_at() instead of scnprintf()", there was a new line after each
UUID

thermal: intel: int340x: Add new line for UUID display

Prior to the commit "763bd29fd3d1 ("thermal: int340x_thermal: Use
sysfs_emit_at() instead of scnprintf()", there was a new line after each
UUID string.

With the newline removed, existing user space like "thermald" fails to
compare each supported UUID as it is using getline() to read UUID and
apply correct thermal table.

To avoid breaking existing user space, add newline after each UUID string.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 763bd29fd3d1 ("thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf()")
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers

The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while t

thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers

The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.

In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.

Use the devdata accessor introduced in the previous patch.

No functional changes intended.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts
Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom
Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: intel: int340x: Add production mode attribute

It is possible that the system manufacturer locks down thermal tuning
beyond what is usually done on the given platform. In that case user
spac

thermal: intel: int340x: Add production mode attribute

It is possible that the system manufacturer locks down thermal tuning
beyond what is usually done on the given platform. In that case user
space calibration tools should not try to adjust the thermal
configuration of the system.

To allow user space to check if that is the case, add a new sysfs
attribute "production_mode" that will be present when the ACPI DCFG
method is present under the INT3400 device object in the ACPI Namespace.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf()

Follow the advice of the Documentation/filesystems/sysfs.rst that show()
should only use sysfs_emit() or sysfs_emit_at() when for

thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf()

Follow the advice of the Documentation/filesystems/sysfs.rst that show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[ rjw: Subject rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x_thermal: Consolidate priv->data_vault checks

It is sufficient to check priv->data_vault once in the error code path
of int3400_thermal_probe(), so do that.

Signed-off-by: Rafael J.

thermal: int340x_thermal: Consolidate priv->data_vault checks

It is sufficient to check priv->data_vault once in the error code path
of int3400_thermal_probe(), so do that.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR

In some case, the GDDV returns a package with a buffer which has
zero length. It causes that kmemdup() returns ZERO_SIZE_PT

thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR

In some case, the GDDV returns a package with a buffer which has
zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10).

Then the data_vault_read() got NULL point dereference problem when
accessing the 0x10 value in data_vault.

[ 71.024560] BUG: kernel NULL pointer dereference, address:
0000000000000010

This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or
NULL value in data_vault.

Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

ACPI: DPTF: Support Meteor Lake

Add Meteor Lake ACPI IDs for DPTF devices.

Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.i

ACPI: DPTF: Support Meteor Lake

Add Meteor Lake ACPI IDs for DPTF devices.

Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Mode setting with new OS handshake

With the new OS handshake introduced by commit: "c7ff29763989 ("thermal:
int340x: Update OS policy capability handshake")", the "enabled" thermal

thermal: int340x: Mode setting with new OS handshake

With the new OS handshake introduced by commit: "c7ff29763989 ("thermal:
int340x: Update OS policy capability handshake")", the "enabled" thermal
zone mode doesn't work in the same way as previously.

The "enabled" mode fails with -EINVAL when the new handshake is used.

To address this issue, when the new OS UUID mask is set:

- When the mode is "enabled", return 0 as the firmware already has the
latest policy mask.

- When the mode is "disabled", update the firmware with the UUID mask
of zero.

This way, the firmware can take over the thermal control.

Also reset the OS UUID mask, which allows user space to update with new
set of policies.

Fixes: c7ff29763989 ("thermal: int340x: Update OS policy capability handshake")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits, removed unneeded parens ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Fix attr.show callback prototype

Control Flow Integrity (CFI) instrumentation of the kernel noticed that
the caller, dev_attr_show(), and the callback, odvp_show(), did not have
ma

thermal: int340x: Fix attr.show callback prototype

Control Flow Integrity (CFI) instrumentation of the kernel noticed that
the caller, dev_attr_show(), and the callback, odvp_show(), did not have
matching function prototypes, which would cause a CFI exception to be
raised. Correct the prototype by using struct device_attribute instead
of struct kobj_attribute.

Reported-and-tested-by: Joao Moreira <joao@overdrivepizza.com>
Link: https://lore.kernel.org/lkml/067ce8bd4c3968054509831fa2347f4f@overdrivepizza.com/
Fixes: 006f006f1e5c ("thermal/int340x_thermal: Export OEM vendor variables")
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Clean up _OSC context init

Now that the UUID is already sanitized by the caller,
lets trivially clean up some of the context arming.

Signed-off-by: Davidlohr Bueso <dave@stgolabs.

thermal: int340x: Clean up _OSC context init

Now that the UUID is already sanitized by the caller,
lets trivially clean up some of the context arming.

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Consolidate freeing of acpi_buffer pointer

Introduce a single point of freeing/exit after ensuring no error in
int3400_setup_gddv().

Signed-off-by: Davidlohr Bueso <dave@stgolabs.

thermal: int340x: Consolidate freeing of acpi_buffer pointer

Introduce a single point of freeing/exit after ensuring no error in
int3400_setup_gddv().

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Clean up unnecessary acpi_buffer pointer freeing

It is the caller's responsibility to free only upon ACPI_SUCCESS.

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Zha

thermal: int340x: Clean up unnecessary acpi_buffer pointer freeing

It is the caller's responsibility to free only upon ACPI_SUCCESS.

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Update OS policy capability handshake

Update the firmware with OS supported policies mask, so that firmware can
relinquish its internal controls. Without this update several Tiger

thermal: int340x: Update OS policy capability handshake

Update the firmware with OS supported policies mask, so that firmware can
relinquish its internal controls. Without this update several Tiger Lake
laptops gets performance limited with in few seconds of executing in
turbo region.

The existing way of enumerating firmware policies via IDSP method and
selecting policy by directly writing those policy UUIDS via _OSC method
is not supported in newer generation of hardware.

There is a new UUID "B23BA85D-C8B7-3542-88DE-8DE2FFCFD698" is defined for
updating policy capabilities. As part of ACPI _OSC method:

Arg0 - UUID: B23BA85D-C8B7-3542-88DE-8DE2FFCFD698
Arg1 - Rev ID: 1
Arg2 - Count: 2
Arg3 - Capability buffers: Array of Arg2 DWORDS

DWORD1: As defined in the ACPI 5.0 Specification
- Bit 0: Query Flag
- Bits 1-3: Always 0
- Bits 4-31: Reserved

DWORD2 and beyond:
- Bit0: set to 1 to indicate Intel(R) Dynamic Tuning is active, 0 to
indicate it is disabled and legacy thermal mechanism should
be enabled.
- Bit1: set to 1 to indicate Intel(R) Dynamic Tuning is controlling
active cooling, 0 to indicate bios shall enable legacy thermal
zone with active trip point.
- Bit2: set to 1 to indicate Intel(R) Dynamic Tuning is controlling
passive cooling, 0 to indicate bios shall enable legacy thermal
zone with passive trip point.
- Bit3: set to 1 to indicate Intel(R) Dynamic Tuning is handling
critical trip point, 0 to indicate bios shall enable legacy
thermal zone with critical trip point.
- Bits 4:31: Reserved

From sysfs interface, there is an existing interface to update policy
UUID using attribute "current_uuid". User space can write the same UUID
for ACTIVE, PASSIVE and CRITICAL policy. Driver converts these UUIDs to
DWORD2 Bit 1 to Bit 3. When any of the policy is activated by user
space it is assumed that dynamic tuning is active.

For example
$cd /sys/bus/platform/devices/INTC1040:00/uuids
To support active policy
$echo "3A95C389-E4B8-4629-A526-C52C88626BAE" > current_uuid
To support passive policy
$echo "42A441D6-AE6A-462b-A84B-4A8CE79027D3" > current_uuid
To support critical policy
$echo "97C68AE7-15FA-499c-B8C9-5DA81D606E0A" > current_uuid

To check all the supported policies
$cat current_uuid
3A95C389-E4B8-4629-A526-C52C88626BAE
42A441D6-AE6A-462b-A84B-4A8CE79027D3
97C68AE7-15FA-499c-B8C9-5DA81D606E0A

To match the bit format for DWORD2, rearranged enum int3400_thermal_uuid
and int3400_thermal_uuids[] by swapping current INT3400_THERMAL_ACTIVE
and INT3400_THERMAL_PASSIVE_1.

If the policies are enumerated via IDSP method then legacy method is
used, if not the new method is used to update policy support.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Increase bitmap size

The number of policies are 10, so can't be supported by the bitmap size
of u8.

Even though there are no platfoms with these many policies, but
for correctness

thermal: int340x: Increase bitmap size

The number of policies are 10, so can't be supported by the bitmap size
of u8.

Even though there are no platfoms with these many policies, but
for correctness increase to u32.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 16fc8eca1975 ("thermal/int340x_thermal: Add additional UUIDs")
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: fix memory leak in int3400_notify()

It is easy to hit the below memory leaks in my TigerLake platform:

unreferenced object 0xffff927c8b91dbc0 (size 32):
comm "kworker/0:2", pid

thermal: int340x: fix memory leak in int3400_notify()

It is easy to hit the below memory leaks in my TigerLake platform:

unreferenced object 0xffff927c8b91dbc0 (size 32):
comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s)
hex dump (first 32 bytes):
4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The
72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk.
backtrace:
[<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0
[<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0
[<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70
[<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal]
[<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71
[<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30
[<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0
[<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0
[<ffffffff9c2cb4dd>] kthread+0xfd/0x130
[<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30

Fix it by calling kfree() accordingly.

Fixes: 38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event")
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Check for NULL after calling kmemdup()

As the potential failure of the allocation, kmemdup() may return NULL.

Then, 'bin_attr_data_vault.private' will be NULL, but
'bin_attr_data_

thermal: int340x: Check for NULL after calling kmemdup()

As the potential failure of the allocation, kmemdup() may return NULL.

Then, 'bin_attr_data_vault.private' will be NULL, but
'bin_attr_data_vault.size' is not 0, which is not consistent.

Therefore, it is better to check the return value of kmemdup() to
avoid the confusion.

Fixes: 0ba13c763aac ("thermal/int340x_thermal: Export GDDV")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Support Raptor Lake

Add Raptor Lake ACPI IDs for DPTF devices.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.

thermal: int340x: Support Raptor Lake

Add Raptor Lake ACPI IDs for DPTF devices.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: delete bogus length check

This check has a signedness bug and does not work. If "length" is
larger than "PAGE_SIZE" then "PAGE_SIZE - length" is not negative
but instead it is a l

thermal: int340x: delete bogus length check

This check has a signedness bug and does not work. If "length" is
larger than "PAGE_SIZE" then "PAGE_SIZE - length" is not negative
but instead it is a large unsigned value. Fortunately, Takashi Iwai
changed this code to use scnprint() instead of snprintf() so now
"length" is never larger than "PAGE_SIZE - 1" and the check can be
removed.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

thermal: int340x: Fix attr.show callback prototype

commit d0f6cfb2bd165b0aa307750e07e03420859bd554 upstream.

Control Flow Integrity (CFI) instrumentation of the kernel noticed that
the caller, dev_

thermal: int340x: Fix attr.show callback prototype

commit d0f6cfb2bd165b0aa307750e07e03420859bd554 upstream.

Control Flow Integrity (CFI) instrumentation of the kernel noticed that
the caller, dev_attr_show(), and the callback, odvp_show(), did not have
matching function prototypes, which would cause a CFI exception to be
raised. Correct the prototype by using struct device_attribute instead
of struct kobj_attribute.

Reported-and-tested-by: Joao Moreira <joao@overdrivepizza.com>
Link: https://lore.kernel.org/lkml/067ce8bd4c3968054509831fa2347f4f@overdrivepizza.com/
Fixes: 006f006f1e5c ("thermal/int340x_thermal: Export OEM vendor variables")
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

thermal: int340x: Check for NULL after calling kmemdup()

[ Upstream commit 38b16d6cfe54c820848bcfc999bc5e8a7da1cefb ]

As the potential failure of the allocation, kmemdup() may return NULL.

Then, '

thermal: int340x: Check for NULL after calling kmemdup()

[ Upstream commit 38b16d6cfe54c820848bcfc999bc5e8a7da1cefb ]

As the potential failure of the allocation, kmemdup() may return NULL.

Then, 'bin_attr_data_vault.private' will be NULL, but
'bin_attr_data_vault.size' is not 0, which is not consistent.

Therefore, it is better to check the return value of kmemdup() to
avoid the confusion.

Fixes: 0ba13c763aac ("thermal/int340x_thermal: Export GDDV")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

thermal: int340x: Increase bitmap size

commit 668f69a5f863b877bc3ae129efe9a80b6f055141 upstream.

The number of policies are 10, so can't be supported by the bitmap size
of u8.

Even though there ar

thermal: int340x: Increase bitmap size

commit 668f69a5f863b877bc3ae129efe9a80b6f055141 upstream.

The number of policies are 10, so can't be supported by the bitmap size
of u8.

Even though there are no platfoms with these many policies, but
for correctness increase to u32.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 16fc8eca1975 ("thermal/int340x_thermal: Add additional UUIDs")
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

thermal: int340x: fix memory leak in int3400_notify()

commit 3abea10e6a8f0e7804ed4c124bea2d15aca977c8 upstream.

It is easy to hit the below memory leaks in my TigerLake platform:

unreferenced obje

thermal: int340x: fix memory leak in int3400_notify()

commit 3abea10e6a8f0e7804ed4c124bea2d15aca977c8 upstream.

It is easy to hit the below memory leaks in my TigerLake platform:

unreferenced object 0xffff927c8b91dbc0 (size 32):
comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s)
hex dump (first 32 bytes):
4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The
72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk.
backtrace:
[<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0
[<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0
[<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70
[<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal]
[<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71
[<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30
[<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0
[<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0
[<ffffffff9c2cb4dd>] kthread+0xfd/0x130
[<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30

Fix it by calling kfree() accordingly.

Fixes: 38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event")
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...