iscsi-target: Only perform wait_for_tasks when performing shutdown

This patch changes transport_generic_free_cmd() to only wait_for_tasks
when shutdown=true is passed to iscsit_free_cmd(

iscsi-target: Only perform wait_for_tasks when performing shutdown

This patch changes transport_generic_free_cmd() to only wait_for_tasks
when shutdown=true is passed to iscsit_free_cmd().

With the advent of >= v3.10 iscsi-target code using se_cmd->cmd_kref,
the extra wait_for_tasks with shutdown=false is unnecessary, and may
end up causing an extra context switch when releasing WRITEs.

Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Update copyright ownership/year information to 2013

Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.

target: Update copyright ownership/year information to 2013

Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Convert to per-cpu ida_alloc + ida_free command map

This patch changes iscsi-target to use transport_alloc_session_tags()
pre-allocation logic for per-cpu session tag pooli

iscsi-target: Convert to per-cpu ida_alloc + ida_free command map

This patch changes iscsi-target to use transport_alloc_session_tags()
pre-allocation logic for per-cpu session tag pooling with internal
ida_alloc() + ida_free() calls based upon the saved se_cmd->map_tag id.

This includes tag pool setup based upon per NodeACL queue_depth after
locating se_node_acl in iscsi_target_locate_portal().

Also update iscsit_allocate_cmd() and iscsit_release_cmd() to use
percpu_ida_alloc() and percpu_ida_free() respectively.

v5 changes;
- Convert to percpu_ida.h include

v2 changes:
- Fix bug with SessionType=Discovery in iscsi_target_locate_portal()

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>

show more ...

iscsi/iser-target: Convert to command priv_size usage

This command converts iscsi/isert-target to use allocations based on
iscsit_transport->priv_size within iscsit_allocate_cmd(), inste

iscsi/iser-target: Convert to command priv_size usage

This command converts iscsi/isert-target to use allocations based on
iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of
using an embedded isert_cmd->iscsi_cmd.

This includes removing iscsit_transport->alloc_cmd() usage, along
with updating isert-target code to use iscsit_priv_cmd().

Also, remove left-over iscsit_transport->release_cmd() usage for
direct calls to iscsit_release_cmd(), and drop the now unused
lio_cmd_cache and isert_cmd_cache.

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>

show more ...

iscsi-target: Fix iscsit_sequence_cmd reject handling for iser

This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd()
in order to avoid external iscsit_reject_cmd() reject

iscsi-target: Fix iscsit_sequence_cmd reject handling for iser

This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd()
in order to avoid external iscsit_reject_cmd() reject usage for all
PDU types.

It also updates PDU specific handlers for traditional iscsi-target
code to not reset the session after posting a ISCSI_OP_REJECT during
setup.

(v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call
target_put_sess_cmd() after iscsit_sequence_cmd() failure)

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Fix iscsit_add_reject* usage for iser

This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd()
usage to not sleep on iscsi_cmd->reject_comp to address a free-a

iscsi-target: Fix iscsit_add_reject* usage for iser

This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd()
usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use
usage bug in v3.10 with iser-target code.

It saves ->reject_reason for use within iscsit_build_reject() so the
correct value for both transport cases. It also drops the legacy
fail_conn parameter usage throughput iscsi-target code and adds
two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions,
along with various small cleanups.

(v2: Re-enable target_put_sess_cmd() to be called from
iscsit_add_reject_from_cmd() for rejects invoked after
target_get_sess_cmd() has been called)

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Move sendtargets parsing into iscsit_process_text_cmd

This patch moves ISCSI_OP_TEXT PDU buffer sanity checks to
iscsit_process_text_cmd() code, so that it can be shared

iscsi-target: Move sendtargets parsing into iscsit_process_text_cmd

This patch moves ISCSI_OP_TEXT PDU buffer sanity checks to
iscsit_process_text_cmd() code, so that it can be shared
with iser-target code.

It adds IFC_SENDTARGETS_ALL + iscsi_cmd->text_in_ptr in order
to save text payload for ISCSI_OP_TEXT_RSP, and updates
iscsit_release_cmd() to assigned memory.

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling

With the introduction of target_get_sess_cmd() referencing counting for
ISCSI_OP_SCSI_CMD processing with iser-targ

iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling

With the introduction of target_get_sess_cmd() referencing counting for
ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage
in traditional iscsi-target driver code now needs to be aware of the
active I/O shutdown case when a remaining se_cmd->cmd_kref reference may
exist after transport_generic_free_cmd() completes, requiring a final
target_put_sess_cmd() to release iscsi_cmd descriptor memory.

This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before
transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids
aquiring the per-connection queue locks for typical fast-path calls
during normal ISTATE_REMOVE operation.

Also update iscsit_free_cmd() usage throughout iscsi-target to
use the new 'bool shutdown' parameter.

This patch fixes a regression bug introduced during v3.10-rc1 in
commit 3e1c81a95, that was causing the following WARNING to appear:

[ 257.235153] ------------[ cut here]------------
[ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86()
[ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop
tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file
target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp
libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf
kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801
microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy
async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon
i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd
mlx4_core scsi_transport_fc scsi_tgt pps_core
[ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103
[ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011
[ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98
[ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000
[ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8
[ 257.352488] Call Trace:
[ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f
[ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b
[ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17
[ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86
[ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12
[ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod]
[ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod]
[ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod]
[ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod]
[ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod]
[ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod]
[ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod]
[ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod]
[ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod]
[ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110
[ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod]
[ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod]
[ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod]
[ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25
[ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod]
[ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8
[ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60
[ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0
[ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60
[ 257.539906] ---[ end trace 5520397d0f2e0800 ]---

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Refactor RX PDU logic + export request PDU handling

This patch refactors existing traditional iscsi RX side PDU handling
to use iscsit_transport, and exports the necessary

iscsi-target: Refactor RX PDU logic + export request PDU handling

This patch refactors existing traditional iscsi RX side PDU handling
to use iscsit_transport, and exports the necessary logic for external
transport modules.

This includes:

- Refactor iscsit_handle_scsi_cmd() into PDU setup / processing
- Add updated iscsit_handle_scsi_cmd() for tradtional iscsi code
- Add iscsit_set_unsoliticed_dataout() wrapper
- Refactor iscsit_handle_data_out() into PDU check / processing
- Add updated iscsit_handle_data_out() for tradtional iscsi code
- Add iscsit_handle_nop_out() + iscsit_handle_task_mgt_cmd() to
accept pre-allocated struct iscsi_cmd
- Add iscsit_build_r2ts_for_cmd() caller for iscsi_target_transport
to handle ISTATE_SEND_R2T for TX immediate queue
- Refactor main traditional iscsi iscsi_target_rx_thread() PDU switch
into iscsi_target_rx_opcode() using iscsit_allocate_cmd()
- Turn iscsi_target_rx_thread() process context into NOP for
ib_isert side work-queue.

v5 changes:

- Make iscsit_handle_scsi_cmd() static (Fengguang)
- Fix iscsit_handle_scsi_cmd() exception se_cmd leak (nab)

v3 changes:
- Add extra target_put_sess_cmd call in iscsit_add_reject_from_cmd
after completion

v2 changes:

- Disable iscsit_ack_from_expstatsn() usage for RDMAExtentions=Yes
- Disable iscsit_allocate_datain_req() usage for RDMAExtentions=Yes
- Add target_get_sess_cmd() reference counting to
iscsit_setup_scsi_cmd()
- Add TFO->lio_check_stop_free() fabric API caller
- Add export of iscsit_stop_dataout_timer() symbol
- Add iscsit_build_r2ts_for_cmd() for iscsit_transport->iscsit_get_dataout()
- Convert existing usage of iscsit_build_r2ts_for_cmd() to
->iscsit_get_dataout()
- Drop RDMAExtentions=Yes specific check in iscsit_build_r2ts_for_cmd()
- Fix RDMAExtentions -> RDMAExtensions typo (andy)
- Pass correct dump_payload value into iscsit_get_immediate_data()
for iscsit_handle_scsi_cmd()

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Add per transport iscsi_cmd alloc/free

This patch converts struct iscsi_cmd memory allocation + free to use
->iscsit_alloc_cmd() iscsit_transport API caller, and export

iscsi-target: Add per transport iscsi_cmd alloc/free

This patch converts struct iscsi_cmd memory allocation + free to use
->iscsit_alloc_cmd() iscsit_transport API caller, and export
iscsit_allocate_cmd() symbols

Also add iscsi_cmd->release_cmd() to be used seperately from
iscsit_transport for connection/session shutdown.

v2 changes:

- Remove unnecessary checks in iscsit_alloc_cmd (asias)
- Drop iscsit_transport->iscsit_free_cmd() usage
- Drop iscsit_transport->iscsit_unmap_cmd() usage
- Add iscsi_cmd->release_cmd()
- Convert lio_release_cmd() to use iscsi_cmd->release_cmd()

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Initial traditional TCP conversion to iscsit_transport

This patch performs the initial conversion of existing traditional iscsi
to use iscsit_transport API callers. This i

iscsi-target: Initial traditional TCP conversion to iscsit_transport

This patch performs the initial conversion of existing traditional iscsi
to use iscsit_transport API callers. This includes:

- iscsi-np cleanups for iscsit_transport_type
- Add iscsi-np transport calls w/ ->iscsit_setup_up() and ->iscsit_free_np()
- Convert login thread process context to use ->iscsit_accept_np() for
connections with pre-allocated struct iscsi_conn
- Convert existing socket accept code to iscsit_accept_np()
- Convert login RX/TX callers to use ->iscsit_get_login_rx() and
->iscsit_put_login_tx() to exchange request/response PDUs
- Convert existing socket login RX/TX calls into iscsit_get_login_rx()
and iscsit_put_login_tx()
- Change iscsit_close_connection() to invoke ->iscsit_free_conn() +
iscsit_put_transport() calls.
- Add iscsit_register_transport() + iscsit_unregister_transport() calls
to module init/exit

v4 changes:

- Add missing iscsit_put_transport() call in iscsi_target_setup_login_socket()
failure case

v2 changes:

- Update module init/exit to use register_transport() + unregister_transport()

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

Pull target updates from Nicholas Bellinger:
"It has been a very busy development cycle this

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

Pull target updates from Nicholas Bellinger:
"It has been a very busy development cycle this time around in target
land, with the highlights including:

- Kill struct se_subsystem_dev, in favor of direct se_device usage
(hch)
- Simplify reservations code by combining SPC-3 + SCSI-2 support for
virtual backends only (hch)
- Simplify ALUA code for virtual only backends, and remove left over
abstractions (hch)
- Pass sense_reason_t as return value for I/O submission path (hch)
- Refactor MODE_SENSE emulation to allow for easier addition of new
mode pages. (roland)
- Add emulation of MODE_SELECT (roland)
- Fix bug in handling of ExpStatSN wrap-around (steve)
- Fix bug in TMR ABORT_TASK lookup in qla2xxx target (steve)
- Add WRITE_SAME w/ UNMAP=0 support for IBLOCK backends (nab)
- Convert ib_srpt to use modern target_submit_cmd caller + drop
legacy ioctx->kref usage (nab)
- Convert ib_srpt to use modern target_submit_tmr caller (nab)
- Add link_magic for fabric allow_link destination target_items for
symlinks within target_core_fabric_configfs.c code (nab)
- Allocate pointers in instead of full structs for
config_group->default_groups (sebastian)
- Fix 32-bit highmem breakage for FILEIO (sebastian)

All told, hch was able to shave off another ~1K LOC by killing the
se_subsystem_dev abstraction, along with a number of PR + ALUA
simplifications. Also, a nice patch by Roland is the refactoring of
MODE_SENSE handling, along with the addition of initial MODE_SELECT
emulation support for virtual backends.

Sebastian found a long-standing issue wrt to allocation of full
config_group instead of pointers for config_group->default_group[]
setup in a number of areas, which ends up saving memory with big
configurations. He also managed to fix another long-standing BUG wrt
to broken 32-bit highmem support within the FILEIO backend driver.

Thank you again to everyone who contributed this round!"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits)
target/iscsi_target: Add NodeACL tags for initiator group support
target/tcm_fc: fix the lockdep warning due to inconsistent lock state
sbp-target: fix error path in sbp_make_tpg()
sbp-target: use simple assignment in tgt_agent_rw_agent_state()
iscsi-target: use kstrdup() for iscsi_param
target/file: merge fd_do_readv() and fd_do_writev()
target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping
target: Add link_magic for fabric allow_link destination target_items
ib_srpt: Convert TMR path to target_submit_tmr
ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->kref
target: Make spc_get_write_same_sectors return sector_t
target/configfs: use kmalloc() instead of kzalloc() for default groups
target/configfs: allocate only 6 slots for dev_cg->default_groups
target/configfs: allocate pointers instead of full struct for default_groups
target: update error handling for sbc_setup_write_same()
iscsit: use GFP_ATOMIC under spin lock
iscsi_target: Remove redundant null check before kfree
target/iblock: Forward declare bio helpers
target: Clean up flow in transport_check_aborted_status()
target: Clean up logic in transport_put_cmd()
...

show more ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation up

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...

show more ...

target: iscsi: fix comment typos in target/iscsi drivers

Correct spelling typo in printk and comment within target/iscsi drivers

Signed-off-by: Masanari Iida <standby24x7@gmail.com>

target: iscsi: fix comment typos in target/iscsi drivers

Correct spelling typo in printk and comment within target/iscsi drivers

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

iscsi-target: Use list_first_entry() where appropriate

Instead of using the obfuscated pattern of

list_for_each_entry(var, list, ...)
break;

to

iscsi-target: Use list_first_entry() where appropriate

Instead of using the obfuscated pattern of

list_for_each_entry(var, list, ...)
break;

to set var to the first entry of a list, use the straightforward

var = list_first_entry(list, ...);

Reported-by: Joern Engel <joern@logfs.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Fix missed wakeup race in TX thread

The sleeping code in iscsi_target_tx_thread() is susceptible to the classic
missed wakeup race:

- TX thread finishes handle_im

iscsi-target: Fix missed wakeup race in TX thread

The sleeping code in iscsi_target_tx_thread() is susceptible to the classic
missed wakeup race:

- TX thread finishes handle_immediate_queue() and handle_response_queue(),
thinks both queues are empty.
- Another thread adds a queue entry and does wake_up_process(), which does
nothing because the TX thread is still awake.
- TX thread does schedule_timeout() and sleeps forever.

In practice this can kill an iSCSI connection if for example an initiator
does single-threaded writes and the target misses the wakeup window when
queueing an R2T; in this case the connection will be stuck until the
initiator loses patience and does some task management operation (or kills
the connection entirely).

Fix this by converting to wait_event_interruptible(), which does not
suffer from this sort of race.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsit: proper endianess conversions

Make sure all on the wire types are use as big endian and big endian only so
that sparse can verify all the conversions are done right.

Sign

iscsit: proper endianess conversions

Make sure all on the wire types are use as big endian and big endian only so
that sparse can verify all the conversions are done right.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsit: use the itt_t abstract type

Use the special itt_t type defined by the iscsi headers and the initiator
to make sure it's an opaque value.

Signed-off-by: Christoph Hellwig

iscsit: use the itt_t abstract type

Use the special itt_t type defined by the iscsi headers and the initiator
to make sure it's an opaque value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target/iscsi: Go back to core allocating data buffer for cmd

We originally changed iscsi to allocate its own buffers just as an
intermediate step to clean up some core buffer allocation

target/iscsi: Go back to core allocating data buffer for cmd

We originally changed iscsi to allocate its own buffers just as an
intermediate step to clean up some core buffer allocation mechanisms. Now
we can put it back.

Also had to change allocate_iovecs to use data_length instead of
t_data_nents because iovecs are now allocated before the data buffer, thus
t_data_nents is not yet initialized.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target/iscsi: Fold _decide_list_to_build into _build_pdu_and_seq_lists

Rename iscsit_build_pdu_and_seq_list to iscsit_do_build_pdu_and_seq_lists

Rename iscsit_do_build_list to iscsi

target/iscsi: Fold _decide_list_to_build into _build_pdu_and_seq_lists

Rename iscsit_build_pdu_and_seq_list to iscsit_do_build_pdu_and_seq_lists

Rename iscsit_do_build_list to iscsit_build_pdu_and_seq_lists

Move code from iscsit_decide_list_to_build into _seq_pdu_list.c, seems
a better fit.

Also update some comments in pdu/seq code for correctness and whitespace.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target/iscsi: Eliminate iscsi_cmd.data_length

Redundant, just use iscsi_cmd->se_cmd.data_length once se_cmd is
initialized, or hdr->data_length before then.

Signed-off-by: Andy

target/iscsi: Eliminate iscsi_cmd.data_length

Redundant, just use iscsi_cmd->se_cmd.data_length once se_cmd is
initialized, or hdr->data_length before then.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target/iscsi: Inline iscsit_allocate_se_cmd and *_for_tmr

Trying to move a bunch of stuff around so iscsi can use target_submit_cmd
someday, and so stuff needs to be in that function dir

target/iscsi: Inline iscsit_allocate_se_cmd and *_for_tmr

Trying to move a bunch of stuff around so iscsi can use target_submit_cmd
someday, and so stuff needs to be in that function directly instead of
hidden, so it can be reordered etc.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target/iscsi: Rename iscsi_cmd.i_list to iscsi_cmd.i_conn_node

The name change makes it clear this list_head is so the cmd can be an
item in the connection's conn_cmd_list.

Sign

target/iscsi: Rename iscsi_cmd.i_list to iscsi_cmd.i_conn_node

The name change makes it clear this list_head is so the cmd can be an
item in the connection's conn_cmd_list.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Add SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cache

Change the test for if a cmd is a tmr request to checking if
SCF_SCSI_TMR_CDB (a new flag) is set in cmd->se_cmd_flags.

target: Add SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cache

Change the test for if a cmd is a tmr request to checking if
SCF_SCSI_TMR_CDB (a new flag) is set in cmd->se_cmd_flags.

Also remove se_tmr_req_cache usage in favor of kzalloc usage,
and make core_tmr_alloc_req() return int + setup se_cmd->se_tmr_req
directly and fix up various fabric module usages

Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

iscsi-target: Fix reject release handling in iscsit_free_cmd()

This patch addresses a bug where iscsit_free_cmd() was incorrectly calling
iscsit_release_cmd() for ISCSI_OP_REJECT because

iscsi-target: Fix reject release handling in iscsit_free_cmd()

This patch addresses a bug where iscsit_free_cmd() was incorrectly calling
iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will
overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was
introduced with the following commit:

commit 0be67f2ed8f577d2c72d917928394c5885fa9134
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Sun Oct 9 01:48:14 2011 -0700

iscsi-target: Remove SCF_SE_LUN_CMD flag abuses

and was manifesting itself as list corruption with the following:

[ 131.191092] ------------[ cut here ]------------
[ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98()
[ 131.191092] Hardware name: VMware Virtual Platform
[ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b
[ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan]
[ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42
[ 131.191092] Call Trace:
[ 131.191092] [<ffffffff8103b553>] warn_slowpath_common+0x80/0x98
[ 131.191092] [<ffffffff8103b5ff>] warn_slowpath_fmt+0x41/0x43
[ 131.191092] [<ffffffff811d0279>] __list_del_entry+0x8d/0x98
[ 131.191092] [<ffffffffa01395c9>] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod]
[ 131.191092] [<ffffffffa013a55c>] transport_generic_free_cmd+0x5d/0x71 [target_core_mod]
[ 131.191092] [<ffffffffa01a012b>] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod]
[ 131.191092] [<ffffffffa01a13be>] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod]
[ 131.191092] [<ffffffffa0196a0c>] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod]
[ 131.191092] [<ffffffffa01a55d4>] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod]
[ 131.191092] [<ffffffff8103609a>] ? check_preempt_wakeup+0x121/0x185
[ 131.191092] [<ffffffff81030801>] ? __dequeue_entity+0x2e/0x33
[ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod]
[ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod]
[ 131.191092] [<ffffffff8138f706>] ? schedule+0x55/0x57
[ 131.191092] [<ffffffff81056c7d>] kthread+0x7d/0x85
[ 131.191092] [<ffffffff81399534>] kernel_thread_helper+0x4/0x10
[ 131.191092] [<ffffffff81056c00>] ? kthread_worker_fn+0x16d/0x16d
[ 131.191092] [<ffffffff81399530>] ? gs_change+0x13/0x13

Reported-by: <jrepac@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...