scsi: target: iscsi: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage

Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows
multiple pages and multipage folios to be passed throug

scsi: target: iscsi: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage

Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage. This allows
multiple pages and multipage folios to be passed through.

TODO: iscsit_fe_sendpage_sg() should perhaps set up a bio_vec array for the
entire set of pages it's going to transfer plus two for the header and
trailer and page fragments to hold the header and trailer - and then call
sendmsg once for the entire message.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mike Christie <michael.christie@oracle.com>
cc: Maurizio Lombardi <mlombard@redhat.com>
cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
cc: "Martin K. Petersen" <martin.petersen@oracle.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: open-iscsi@googlegroups.com
Link: https://lore.kernel.org/r/20230623225513.2732256-13-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

scsi: target: iscsi: Fix hang in the iSCSI login code

If the initiator suddenly stops sending data during a login while keeping
the TCP connection open, the login_work won't be scheduled and will ne

scsi: target: iscsi: Fix hang in the iSCSI login code

If the initiator suddenly stops sending data during a login while keeping
the TCP connection open, the login_work won't be scheduled and will never
release the login semaphore; concurrent login operations will therefore get
stuck and fail.

The bug is due to the inability of the login timeout code to properly
handle this particular case.

Fix the problem by replacing the old per-NP login timer with a new
per-connection timer.

The timer is started when an initiator connects to the target; if it
expires, it sends a SIGINT signal to the thread pointed at by the
conn->login_kworker pointer.

conn->login_kworker is set by calling the iscsit_set_login_timer_kworker()
helper, initially it will point to the np thread; When the login
operation's control is in the process of being passed from the NP-thread to
login_work, the conn->login_worker pointer is set to NULL. Finally,
login_kworker will be changed to point to the worker thread executing the
login_work job.

If conn->login_kworker is NULL when the timer expires, it means that the
login operation hasn't been completed yet but login_work isn't running, in
this case the timer will mark the login process as failed and will schedule
login_work so the latter will be forced to free the resources it holds.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20230508162219.1731964-2-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: Replace all non-returning strlcpy() with strscpy()

strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can l

scsi: target: Replace all non-returning strlcpy() with strscpy()

strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1]. In an effort
to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Link: https://lore.kernel.org/r/20230516025322.2804923-1-azeemshaikh38@gmail.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

use less confusing names for iov_iter direction initializers

READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with wri

use less confusing names for iov_iter direction initializers

READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

scsi: target: iscsi: Rename iscsi_session to iscsit_session

The structure iscsi_session naming is used by the iSCSI initiator
driver. Rename the target session to iscsit_session to have more readabl

scsi: target: iscsi: Rename iscsi_session to iscsit_session

The structure iscsi_session naming is used by the iSCSI initiator
driver. Rename the target session to iscsit_session to have more readable
code.

Link: https://lore.kernel.org/r/20220428092939.36768-3-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: iscsi: Rename iscsi_conn to iscsit_conn

The structure iscsi_conn naming is used by the iSCSI initiator
driver. Rename the target conn to iscsit_conn to have more readable code.

Link:

scsi: target: iscsi: Rename iscsi_conn to iscsit_conn

The structure iscsi_conn naming is used by the iSCSI initiator
driver. Rename the target conn to iscsit_conn to have more readable code.

Link: https://lore.kernel.org/r/20220428092939.36768-2-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: iscsi: Rename iscsi_cmd to iscsit_cmd

The structure iscsi_cmd naming is used by the iSCSI initiator driver.
Rename the target cmd to iscsit_cmd to have more readable code.

Link: https

scsi: target: iscsi: Rename iscsi_cmd to iscsit_cmd

The structure iscsi_cmd naming is used by the iSCSI initiator driver.
Rename the target cmd to iscsit_cmd to have more readable code.

Link: https://lore.kernel.org/r/20220428092939.36768-1-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: iscsi: Remove unused macro PRINT_BUF

Remove unused macro to fix the following compilation warning:

drivers/target//iscsi/iscsi_target_util.c:31: warning: macro "PRINT_BUFF" is not use

scsi: target: iscsi: Remove unused macro PRINT_BUF

Remove unused macro to fix the following compilation warning:

drivers/target//iscsi/iscsi_target_util.c:31: warning: macro "PRINT_BUFF" is not used [-Wunused-macros]
#define PRINT_BUFF(buff, len) \

Link: https://lore.kernel.org/r/20210228055645.22253-12-chaitanya.kulkarni@wdc.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: iscsi: Redo iscsit_check_session_usage_count() return code

The return value of iscsit_check_session_usage_count() is only checked if
it was not allowed to sleep. If it returns `2' then

scsi: target: iscsi: Redo iscsit_check_session_usage_count() return code

The return value of iscsit_check_session_usage_count() is only checked if
it was not allowed to sleep. If it returns `2' then a timer is prepared. If
it returns something else or if it was allowed to sleep then it is ignored.

Let iscsit_check_session_usage_count() return true if it needs to arm the
timer - otherwise false. This simplifies the code flow of the only caller.

Link: https://lore.kernel.org/r/20201220203638.43615-4-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: iscsi: Avoid in_interrupt() usage in iscsit_check_session_usage_count()

iscsit_check_session_usage_count() uses in_interrupt() to find out if it is
safe to invoke wait_for_completion()

scsi: target: iscsi: Avoid in_interrupt() usage in iscsit_check_session_usage_count()

iscsit_check_session_usage_count() uses in_interrupt() to find out if it is
safe to invoke wait_for_completion().

The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

There is only one caller of iscsit_check_session_usage_count() which
already has an argument indicating if it is safe to sleep.

Extend iscsit_check_session_usage_count() by an argument indicating if it
may sleep.

Link: https://lore.kernel.org/r/20201220203638.43615-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: iscsi: Remove the iscsi_data_count structure

This patch removes the iscsi_data_count structure and the
iscsit_do_rx_data() function because they are used only by rx_data()

Link: https

scsi: target: iscsi: Remove the iscsi_data_count structure

This patch removes the iscsi_data_count structure and the
iscsit_do_rx_data() function because they are used only by rx_data()

Link: https://lore.kernel.org/r/20200424113913.17237-1-mlombard@redhat.com
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

Based on 3 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

Based on 3 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

scsi: target/iscsi: Handle too large immediate data buffers correctly

Since target_alloc_sgl() and iscsit_allocate_iovecs() allocate buffer space
for se_cmd.data_length bytes and since that number c

scsi: target/iscsi: Handle too large immediate data buffers correctly

Since target_alloc_sgl() and iscsit_allocate_iovecs() allocate buffer space
for se_cmd.data_length bytes and since that number can be smaller than the
iSCSI Expected Data Transfer Length (EDTL), ensure that the iSCSI target
driver does not attempt to receive more bytes than what fits in the receive
buffer. Always receive the full immediate data buffer such that the iSCSI
target driver does not attempt to parse immediate data as an iSCSI PDU.

Note: the current code base only calls iscsit_get_dataout() if the size of
the immediate data buffer does not exceed the buffer size derived from the
SCSI CDB. See also target_cmd_size_check().

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target/iscsi: Only send R2T if needed

If an initiator submits more immediate data than the size derived from the
SCSI CDB, do not send any R2T to the initiator. This scenario is triggered
by t

scsi: target/iscsi: Only send R2T if needed

If an initiator submits more immediate data than the size derived from the
SCSI CDB, do not send any R2T to the initiator. This scenario is triggered
by the libiscsi test ALL.iSCSIResiduals.WriteVerify16Residuals if the iSCSI
target driver is modified to discard too large immediate data buffers
instead of trying to parse these as an iSCSI PDU. This patch avoids that a
negative xfer_len value is passed to iscsit_add_r2t_to_list() if too large
immediate data buffers are handled correctly.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target/iscsi: Detect conn_cmd_list corruption early

Certain behavior of an initiator can cause the target driver to send both a
reject and a SCSI response. If that happens two target_put_sess_

scsi: target/iscsi: Detect conn_cmd_list corruption early

Certain behavior of an initiator can cause the target driver to send both a
reject and a SCSI response. If that happens two target_put_sess_cmd() calls
will occur without the command having been removed from conn_cmd_list. In
other words, conn_cmd_list will get corrupted once the freed memory is
reused. Although the Linux kernel can detect list corruption if list
debugging is enabled, in this case the context in which list corruption is
detected is not related to the context that caused list corruption. Hence
add WARN_ON() statements that report the context that is causing list
corruption.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target/iscsi: Rename a function and a function pointer

Having both a function and a function pointer member with the same
name (iscsit_release_cmd) is confusing. Hence rename the function poin

scsi: target/iscsi: Rename a function and a function pointer

Having both a function and a function pointer member with the same
name (iscsit_release_cmd) is confusing. Hence rename the function pointer
member.

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target/iscsi: Convert comments about locking into runtime checks

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Han

scsi: target/iscsi: Convert comments about locking into runtime checks

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target/iscsi: Remove an incorrect comment

The single iscsit_start_nopin_response_timer() caller does not hold any
locks. Hence remove the comment above this function.

Cc: Nicholas Bellinger <

scsi: target/iscsi: Remove an incorrect comment

The single iscsit_start_nopin_response_timer() caller does not hold any
locks. Hence remove the comment above this function.

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

sbitmap: optimize wakeup check

Even if we have no waiters on any of the sbitmap_queue wait states, we
still have to loop every entry to check. We do this for every IO, so
the cost adds up.

Shift a

sbitmap: optimize wakeup check

Even if we have no waiters on any of the sbitmap_queue wait states, we
still have to loop every entry to check. We do this for every IO, so
the cost adds up.

Shift a bit of the cost to the slow path, when we actually have waiters.
Wrap prepare_to_wait_exclusive() and finish_wait(), so we can maintain
an internal count of how many are currently active. Then we can simply
check this count in sbq_wake_ptr() and not have to loop if we don't
have any sleepers.

Convert the two users of sbitmap with waiting, blk-mq-tag and iSCSI.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

iov_iter: Separate type from direction and use accessor functions

In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most pla

iov_iter: Separate type from direction and use accessor functions

In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.

Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.

Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.

Signed-off-by: David Howells <dhowells@redhat.com>

show more ...

scsi: target: split out helper for cxn timeout error stashing

Replace existing nested code blocks with helper function calls.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K

scsi: target: split out helper for cxn timeout error stashing

Replace existing nested code blocks with helper function calls.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target: log NOP ping timeouts as errors

Events resulting in connection outages like this should be logged as
errors. Include the I_T Nexus in the message to aid path identification.

Signed-of

scsi: target: log NOP ping timeouts as errors

Events resulting in connection outages like this should be logged as
errors. Include the I_T Nexus in the message to aid path identification.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: iscsi target: have iscsit_start_nopin_timer call __iscsit_start_nopin_timer

Just have iscsit_start_nopin_timer grab the lock and call
__iscsit_start_nopin_timer.

Signed-off-by: Mike Christie

scsi: iscsi target: have iscsit_start_nopin_timer call __iscsit_start_nopin_timer

Just have iscsit_start_nopin_timer grab the lock and call
__iscsit_start_nopin_timer.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Revert "scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers"

The cxgbit driver expects that __iscsit_free_cmd() is called before the
target core frees the command page list. Since this

Revert "scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers"

The cxgbit driver expects that __iscsit_free_cmd() is called before the
target core frees the command page list. Since this patch breaks the
cxgbit driver, revert it.

Reported-by: Varun Prakash <varun@chelsio.com>
Fixes: ed88f055788a ("scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers

Instead of calling __iscsit_free_cmd() from inside iscsit_aborted_task() if
a command has been aborted and from inside iscsit_free_cm

scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers

Instead of calling __iscsit_free_cmd() from inside iscsit_aborted_task() if
a command has been aborted and from inside iscsit_free_cmd() if a command
has not been aborted, call __iscsit_free_cmd() from inside
lio_release_cmd(). The latter function is namely called for all commands
once the reference count has dropped to zero.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...