Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12 |
|
#
e40219d5 |
| 05-Sep-2019 |
Jerry Lin <wahahab11@gmail.com> |
staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support
This patch remove model related configuration. Since the module can decide which platform data to use itself base on current running ol
staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support
This patch remove model related configuration. Since the module can decide which platform data to use itself base on current running olpc board.
Also change module dependency from (GPIO_CS5535 || GPIO_CS5535=n) to (GPIO_CS5535 || ACPI) because original one does not make any sense and module only doing real work when GPIO_CS5535 or ACPI is setted.
Remove kernel configurations: - FB_OLPC_DCON_1 - FB_OLPC_DCON_1_5
Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190906010613.GA562@compute1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5 |
|
#
5f251e98 |
| 28-Jul-2019 |
Jerry Lin <wahahab11@gmail.com> |
staging: olpc_dcon: Remove TODO item
All uses of old GPIO API have been converted to new API. This item can be removed from TODO file.
Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://l
staging: olpc_dcon: Remove TODO item
All uses of old GPIO API have been converted to new API. This item can be removed from TODO file.
Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190729023544.GA25930@compute1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
af144036 |
| 28-May-2019 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
staging/olpc_dcon: Add drm conversion to TODO
this driver is pretty horrible from a design pov, and needs a complete overhaul. Concrete thing that annoys me is that it looks at registered_fb, which
staging/olpc_dcon: Add drm conversion to TODO
this driver is pretty horrible from a design pov, and needs a complete overhaul. Concrete thing that annoys me is that it looks at registered_fb, which is an internal thing to fbmem.c and fbcon.c. And ofc it gets the lifetime rules all wrong (it should at least use get/put_fb_info).
Looking at the history, there's been an attempt at dropping this from staging in 2016, but that had to be reverted. Since then not real effort except the usual stream of trivial patches, and fbdev has been formally closed for any new hw support. Time to try again and drop this?
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jens Frederich <jfrederich@gmail.com> Cc: Daniel Drake <dsd@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-33-daniel.vetter@ffwll.ch
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
fbbd5e53 |
| 19-Apr-2018 |
Linus Walleij <linus.walleij@linaro.org> |
staging: olpc_dcon: Augment TODO file with GPIO work item
To make sure that this driver does not leave staging before it is properly converted to use the new GPIO descriptor API, augment the TODO fi
staging: olpc_dcon: Augment TODO file with GPIO work item
To make sure that this driver does not leave staging before it is properly converted to use the new GPIO descriptor API, augment the TODO file with this work item.
Cc: Andres Salomon <dilinger@queued.net> Cc: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7 |
|
#
53c43c5c |
| 04-Apr-2016 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "Staging: olpc_dcon: Remove obsolete driver"
This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac. It turns out these machines are still out there, and the original patch broke them.
Revert "Staging: olpc_dcon: Remove obsolete driver"
This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac. It turns out these machines are still out there, and the original patch broke them. So revert it, adding back the driver, so people's machines still work properly.
Reported-by: James Cameron <quozl@laptop.org> Cc: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7 |
|
#
1a04eac9 |
| 20-Aug-2013 |
Jens Frederich <jfrederich@gmail.com> |
Staging: olpc_dcon: Removed more completed TODO entries
1. Console event notifier support: No one I've asked knows what this all about. 2. Audit code for unnecessary code: This is done. 3. Verify sa
Staging: olpc_dcon: Removed more completed TODO entries
1. Console event notifier support: No one I've asked knows what this all about. 2. Audit code for unnecessary code: This is done. 3. Verify sane i2cAPI usage: This is also done.
Signed-off-by: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.11-rc6 |
|
#
7d5b640d |
| 17-Aug-2013 |
Jens Frederich <jfrederich@gmail.com> |
Staging: olpc_dcon: Already completed TODO entry removed
The TODO entry - drop global variables, use a proper olpc_dcon_priv struct - is already finished. The driver has no global variables. It uses
Staging: olpc_dcon: Already completed TODO entry removed
The TODO entry - drop global variables, use a proper olpc_dcon_priv struct - is already finished. The driver has no global variables. It uses the private structure 'dcon_priv'.
Signed-off-by: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.11-rc5, v3.11-rc4 |
|
#
3140b458 |
| 04-Aug-2013 |
Jens Frederich <jfrederich@gmail.com> |
Staging: olpc_dcon: updating MAINTAINERS
Andres Salomon and Chris Ball are not longer at OLPC. Daniel Drake is the new OLPC go-to guy. And I wanna also be CC'd on DCON and other OLPC patches.
Signe
Staging: olpc_dcon: updating MAINTAINERS
Andres Salomon and Chris Ball are not longer at OLPC. Daniel Drake is the new OLPC go-to guy. And I wanna also be CC'd on DCON and other OLPC patches.
Signed-off-by: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
7df68962 |
| 30-Jul-2013 |
Jens Frederich <jfrederich@gmail.com> |
staging: olpc_dcon: provide detailed FB_OLPC_DCON help section
The FB_OLPC_DCON help section is to short according to checkpatch.pl. We want more information about the controller type, its task, its
staging: olpc_dcon: provide detailed FB_OLPC_DCON help section
The FB_OLPC_DCON help section is to short according to checkpatch.pl. We want more information about the controller type, its task, its video pipeline position and so on.
There are no style issues, remove checkpatch.pl TODO entry.
Signed-off-by: Jens Frederich <jfrederich@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1 |
|
#
7637c925 |
| 12-Jan-2011 |
Andres Salomon <dilinger@queued.net> |
drivers/staging/olpc_dcon: convert to new cs5535 gpio API
Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gpio API in ot
drivers/staging/olpc_dcon: convert to new cs5535 gpio API
Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gpio API in other places.
Note that we don't actually clean up the driver properly yet (once loaded, it always remains loaded). That'll come later..
This patch is necessary for building the driver.
Signed-off-by: Andres Salomon <dilinger@queued.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6 |
|
#
58f92cf1 |
| 25-Sep-2010 |
Andres Salomon <dilinger@queued.net> |
staging: olpc_dcon: add people to the Cc list
Some additional folks requested to be Cc'd for OLPC-DCON changes; add them to the TODO file.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed
staging: olpc_dcon: add people to the Cc list
Some additional folks requested to be Cc'd for OLPC-DCON changes; add them to the TODO file.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
#
8ae48363 |
| 25-Sep-2010 |
Andres Salomon <dilinger@queued.net> |
staging: olpc_dcon: add TODO file
Add and populate a TODO file for the olpc_dcon driver.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12 |
|
#
e40219d5 |
| 05-Sep-2019 |
Jerry Lin <wahahab11@gmail.com> |
staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support This patch remove model related configuration. Since the module can decide which platform data to use itself base on cu
staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support This patch remove model related configuration. Since the module can decide which platform data to use itself base on current running olpc board. Also change module dependency from (GPIO_CS5535 || GPIO_CS5535=n) to (GPIO_CS5535 || ACPI) because original one does not make any sense and module only doing real work when GPIO_CS5535 or ACPI is setted. Remove kernel configurations: - FB_OLPC_DCON_1 - FB_OLPC_DCON_1_5 Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190906010613.GA562@compute1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5 |
|
#
5f251e98 |
| 28-Jul-2019 |
Jerry Lin <wahahab11@gmail.com> |
staging: olpc_dcon: Remove TODO item All uses of old GPIO API have been converted to new API. This item can be removed from TODO file. Signed-off-by: Jerry Lin <wahahab11@gmail.
staging: olpc_dcon: Remove TODO item All uses of old GPIO API have been converted to new API. This item can be removed from TODO file. Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190729023544.GA25930@compute1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
af144036 |
| 28-May-2019 |
Daniel Vetter <daniel.vetter@ffwll.ch> |
staging/olpc_dcon: Add drm conversion to TODO this driver is pretty horrible from a design pov, and needs a complete overhaul. Concrete thing that annoys me is that it looks at regis
staging/olpc_dcon: Add drm conversion to TODO this driver is pretty horrible from a design pov, and needs a complete overhaul. Concrete thing that annoys me is that it looks at registered_fb, which is an internal thing to fbmem.c and fbcon.c. And ofc it gets the lifetime rules all wrong (it should at least use get/put_fb_info). Looking at the history, there's been an attempt at dropping this from staging in 2016, but that had to be reverted. Since then not real effort except the usual stream of trivial patches, and fbdev has been formally closed for any new hw support. Time to try again and drop this? Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jens Frederich <jfrederich@gmail.com> Cc: Daniel Drake <dsd@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-33-daniel.vetter@ffwll.ch
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
fbbd5e53 |
| 19-Apr-2018 |
Linus Walleij <linus.walleij@linaro.org> |
staging: olpc_dcon: Augment TODO file with GPIO work item To make sure that this driver does not leave staging before it is properly converted to use the new GPIO descriptor API, aug
staging: olpc_dcon: Augment TODO file with GPIO work item To make sure that this driver does not leave staging before it is properly converted to use the new GPIO descriptor API, augment the TODO file with this work item. Cc: Andres Salomon <dilinger@queued.net> Cc: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7 |
|
#
53c43c5c |
| 04-Apr-2016 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "Staging: olpc_dcon: Remove obsolete driver" This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac. It turns out these machines are still out there, and the original patch
Revert "Staging: olpc_dcon: Remove obsolete driver" This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac. It turns out these machines are still out there, and the original patch broke them. So revert it, adding back the driver, so people's machines still work properly. Reported-by: James Cameron <quozl@laptop.org> Cc: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
82ef33af |
| 26-Dec-2015 |
Shraddha Barke <shraddha.6596@gmail.com> |
Staging: olpc_dcon: Remove obsolete driver Remove support for One Laptop Per Child organization since it is dead. http://www.olpcnews.com/about_olpc_news/goodbye_one_laptop_per_child.htm
Staging: olpc_dcon: Remove obsolete driver Remove support for One Laptop Per Child organization since it is dead. http://www.olpcnews.com/about_olpc_news/goodbye_one_laptop_per_child.html Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7 |
|
#
1a04eac9 |
| 20-Aug-2013 |
Jens Frederich <jfrederich@gmail.com> |
Staging: olpc_dcon: Removed more completed TODO entries 1. Console event notifier support: No one I've asked knows what this all about. 2. Audit code for unnecessary code: This is do
Staging: olpc_dcon: Removed more completed TODO entries 1. Console event notifier support: No one I've asked knows what this all about. 2. Audit code for unnecessary code: This is done. 3. Verify sane i2cAPI usage: This is also done. Signed-off-by: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.11-rc6 |
|
#
7d5b640d |
| 17-Aug-2013 |
Jens Frederich <jfrederich@gmail.com> |
Staging: olpc_dcon: Already completed TODO entry removed The TODO entry - drop global variables, use a proper olpc_dcon_priv struct - is already finished. The driver has no global variab
Staging: olpc_dcon: Already completed TODO entry removed The TODO entry - drop global variables, use a proper olpc_dcon_priv struct - is already finished. The driver has no global variables. It uses the private structure 'dcon_priv'. Signed-off-by: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.11-rc5, v3.11-rc4 |
|
#
3140b458 |
| 04-Aug-2013 |
Jens Frederich <jfrederich@gmail.com> |
Staging: olpc_dcon: updating MAINTAINERS Andres Salomon and Chris Ball are not longer at OLPC. Daniel Drake is the new OLPC go-to guy. And I wanna also be CC'd on DCON and other OLPC
Staging: olpc_dcon: updating MAINTAINERS Andres Salomon and Chris Ball are not longer at OLPC. Daniel Drake is the new OLPC go-to guy. And I wanna also be CC'd on DCON and other OLPC patches. Signed-off-by: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
7df68962 |
| 30-Jul-2013 |
Jens Frederich <jfrederich@gmail.com> |
staging: olpc_dcon: provide detailed FB_OLPC_DCON help section The FB_OLPC_DCON help section is to short according to checkpatch.pl. We want more information about the controller type, i
staging: olpc_dcon: provide detailed FB_OLPC_DCON help section The FB_OLPC_DCON help section is to short according to checkpatch.pl. We want more information about the controller type, its task, its video pipeline position and so on. There are no style issues, remove checkpatch.pl TODO entry. Signed-off-by: Jens Frederich <jfrederich@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1 |
|
#
7637c925 |
| 12-Jan-2011 |
Andres Salomon <dilinger@queued.net> |
drivers/staging/olpc_dcon: convert to new cs5535 gpio API Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gp
drivers/staging/olpc_dcon: convert to new cs5535 gpio API Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gpio API in other places. Note that we don't actually clean up the driver properly yet (once loaded, it always remains loaded). That'll come later.. This patch is necessary for building the driver. Signed-off-by: Andres Salomon <dilinger@queued.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6 |
|
#
58f92cf1 |
| 25-Sep-2010 |
Andres Salomon <dilinger@queued.net> |
staging: olpc_dcon: add people to the Cc list Some additional folks requested to be Cc'd for OLPC-DCON changes; add them to the TODO file. Signed-off-by: Andres Salomon <dilinge
staging: olpc_dcon: add people to the Cc list Some additional folks requested to be Cc'd for OLPC-DCON changes; add them to the TODO file. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
#
8ae48363 |
| 25-Sep-2010 |
Andres Salomon <dilinger@queued.net> |
staging: olpc_dcon: add TODO file Add and populate a TODO file for the olpc_dcon driver. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <g
staging: olpc_dcon: add TODO file Add and populate a TODO file for the olpc_dcon driver. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|