Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47 |
|
#
de0952f2 |
| 09-Jun-2022 |
Javier Martinez Canillas <javierm@redhat.com> |
staging: olpc_dcon: mark driver as broken
The commit eecb3e4e5d9d ("staging: olpc_dcon: add OLPC display controller (DCON) support") added this driver in 2010, and has been in staging since then. It
staging: olpc_dcon: mark driver as broken
The commit eecb3e4e5d9d ("staging: olpc_dcon: add OLPC display controller (DCON) support") added this driver in 2010, and has been in staging since then. It was marked as broken at some point because it didn't even build but that got removed once the build issues were addressed.
But it seems that the work to move this driver out of staging has stalled, the last non-trivial change to fix one of the items mentioned in its todo file was commit e40219d5e4b2 ("staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support") in 2019.
And even if work to destage the driver is resumed, the fbdev subsystem has been deprecated for a long time and instead it should be ported to DRM.
Now this driver is preventing to land a kernel wide change, that makes the num_registered_fb symbol to be private to the fbmem.c file.
So let's just mark the driver as broken. Someone can then work on making it not depend on the num_registered_fb symbol, allowing to drop the broken dependency again.
Suggested-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220609223424.907174-1-javierm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2 |
|
#
01b16aed |
| 25-Sep-2019 |
Jerry Lin <wahahab11@gmail.com> |
staging: olpc_dcon: fix wrong dependencies in Kconfig file
To allow simultaneous support for XO-1 and XO-1.5. This module require GPIO_CS5535 (for 1.0) and ACPI (for 1.5) now.
Reported-by: kbuild t
staging: olpc_dcon: fix wrong dependencies in Kconfig file
To allow simultaneous support for XO-1 and XO-1.5. This module require GPIO_CS5535 (for 1.0) and ACPI (for 1.5) now.
Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190925074243.GA24947@compute1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12 |
|
#
e40219d5 |
| 05-Sep-2019 |
Jerry Lin <wahahab11@gmail.com> |
staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support
This patch remove model related configuration. Since the module can decide which platform data to use itself base on current running ol
staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support
This patch remove model related configuration. Since the module can decide which platform data to use itself base on current running olpc board.
Also change module dependency from (GPIO_CS5535 || GPIO_CS5535=n) to (GPIO_CS5535 || ACPI) because original one does not make any sense and module only doing real work when GPIO_CS5535 or ACPI is setted.
Remove kernel configurations: - FB_OLPC_DCON_1 - FB_OLPC_DCON_1_5
Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190906010613.GA562@compute1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17 |
|
#
8c5dc8d9 |
| 17-Jan-2019 |
Alexander Shiyan <shc_work@mail.ru> |
video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
We have two *_CLASS_DEVICE kernel config options (LCD_CLASS_DEVICE and BACKLIGHT_LCD_DEVICE) that do the same job. The patch remo
video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
We have two *_CLASS_DEVICE kernel config options (LCD_CLASS_DEVICE and BACKLIGHT_LCD_DEVICE) that do the same job. The patch removes useless BACKLIGHT_LCD_SUPPORT option and converts LCD_CLASS_DEVICE into a menu.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
99b75a4e |
| 02-Apr-2019 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
staging: add missing SPDX lines to Kconfig files
There are a few remaining drivers/staging/*/Kconfig files that do not have SPDX identifiers in them. Add the correct GPL-2.0 identifier to them to m
staging: add missing SPDX lines to Kconfig files
There are a few remaining drivers/staging/*/Kconfig files that do not have SPDX identifiers in them. Add the correct GPL-2.0 identifier to them to make scanning tools happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9 |
|
#
33f49571 |
| 18-Sep-2018 |
Lubomir Rintel <lkundrak@v3.sk> |
staging: olpc_dcon: add a missing dependency
WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by
staging: olpc_dcon: add a missing dependency
WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - FB_OLPC_DCON [=y] && STAGING [=y] && X86 [=y] && OLPC [=y] && FB [=y] && I2C [=y] && (GPIO_CS5535 [=n] || GPIO_CS5535 [=n]=n)
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7 |
|
#
0b379131 |
| 14-Jul-2018 |
Cristian Kubis <cristian.kubis@tsunix.de> |
staging: olpc_dcon: prefer 'help' in KConfig
Fix for a style warning reported by checkpatch.pl in KConfig suggesting to use 'help' instead of '---help---'.
Signed-off-by: Cristian Kubis <cristian.k
staging: olpc_dcon: prefer 'help' in KConfig
Fix for a style warning reported by checkpatch.pl in KConfig suggesting to use 'help' instead of '---help---'.
Signed-off-by: Cristian Kubis <cristian.kubis@tsunix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7 |
|
#
53c43c5c |
| 04-Apr-2016 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "Staging: olpc_dcon: Remove obsolete driver"
This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac. It turns out these machines are still out there, and the original patch broke them.
Revert "Staging: olpc_dcon: Remove obsolete driver"
This reverts commit 82ef33af9dd30075adbd9f3dd161b606b8ba88ac. It turns out these machines are still out there, and the original patch broke them. So revert it, adding back the driver, so people's machines still work properly.
Reported-by: James Cameron <quozl@laptop.org> Cc: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5 |
|
#
d6ae99d0 |
| 13-Oct-2013 |
Randy Dunlap <rdunlap@infradead.org> |
staging/olpc_dcon: fix kconfig to fix build errors
Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y by preventing that kconfig combination.
These build errors are caused by having a kconfig b
staging/olpc_dcon: fix kconfig to fix build errors
Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y by preventing that kconfig combination.
These build errors are caused by having a kconfig bool symbol (FB_OLPC_DCON_1) that depend on a tristate symbol (GPIO_CS5535), but when the tristate symbol is =m, the bool symbol is =y.
drivers/built-in.o: In function `dcon_read_status_xo_1': olpc_dcon_xo_1.c:(.text+0x359531): undefined reference to `cs5535_gpio_set' drivers/built-in.o: In function `dcon_wiggle_xo_1': olpc_dcon_xo_1.c:(.text+0x35959f): undefined reference to `cs5535_gpio_set' olpc_dcon_xo_1.c:(.text+0x359610): undefined reference to `cs5535_gpio_clear' drivers/built-in.o:olpc_dcon_xo_1.c:(.text+0x3596a1): more undefined references to `cs5535_gpio_clear' follow drivers/built-in.o: In function `dcon_wiggle_xo_1': olpc_dcon_xo_1.c:(.text+0x359708): undefined reference to `cs5535_gpio_set' drivers/built-in.o: In function `dcon_init_xo_1': olpc_dcon_xo_1.c:(.text+0x35989b): undefined reference to `cs5535_gpio_clear' olpc_dcon_xo_1.c:(.text+0x3598b5): undefined reference to `cs5535_gpio_isset' olpc_dcon_xo_1.c:(.text+0x359963): undefined reference to `cs5535_gpio_setup_event' olpc_dcon_xo_1.c:(.text+0x359980): undefined reference to `cs5535_gpio_set_irq' olpc_dcon_xo_1.c:(.text+0x359a36): undefined reference to `cs5535_gpio_set'
However, adding GPIO_CS5535 to the Kconfig dependencies also creates a kconfig recursive dependency error on powerpc: drivers/i2c/Kconfig:5:error: recursive dependency detected! drivers/i2c/Kconfig:5: symbol I2C is selected by FB_OLPC_DCON drivers/staging/olpc_dcon/Kconfig:1: symbol FB_OLPC_DCON depends on GPIO_CS5535 drivers/gpio/Kconfig:577: symbol GPIO_CS5535 depends on GPIOLIB drivers/gpio/Kconfig:38: symbol GPIOLIB is selected by ARCH_REQUIRE_GPIOLIB drivers/gpio/Kconfig:23: symbol ARCH_REQUIRE_GPIOLIB is selected by MCU_MPC8349EMITX arch/powerpc/platforms/Kconfig:351: symbol MCU_MPC8349EMITX depends on I2C
This is due to FB_OLPC_DCON selecting I2C instead of depending on it, so change the select to a dependency.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Drake <dsd@laptop.org> Cc: Jens Frederich <jfrederich@gmail.com> Cc: Jon Nettleton <jon.nettleton@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
fcd70b4b |
| 15-Oct-2013 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "staging/olpc: fix dependencies to fix build errors"
This reverts commit 6170155d4affa14eb13cb789623d54baba2bf241.
It isn't correct.
Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Drak
Revert "staging/olpc: fix dependencies to fix build errors"
This reverts commit 6170155d4affa14eb13cb789623d54baba2bf241.
It isn't correct.
Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Drake <dsd@laptop.org> Cc: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.12-rc4, v3.12-rc3 |
|
#
6170155d |
| 27-Sep-2013 |
Randy Dunlap <rdunlap@infradead.org> |
staging/olpc: fix dependencies to fix build errors
Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y by preventing that kconfig combination.
These build errors are caused by having a kconfig b
staging/olpc: fix dependencies to fix build errors
Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y by preventing that kconfig combination.
These build errors are caused by having a kconfig bool symbol (FB_OLPC_DCON_1) that depend on a tristate symbol (GPIO_CS5535), but when the tristate symbol is =m, the bool symbol is =y.
drivers/built-in.o: In function `dcon_read_status_xo_1': olpc_dcon_xo_1.c:(.text+0x359531): undefined reference to `cs5535_gpio_set' drivers/built-in.o: In function `dcon_wiggle_xo_1': olpc_dcon_xo_1.c:(.text+0x35959f): undefined reference to `cs5535_gpio_set' olpc_dcon_xo_1.c:(.text+0x359610): undefined reference to `cs5535_gpio_clear' drivers/built-in.o:olpc_dcon_xo_1.c:(.text+0x3596a1): more undefined references to `cs5535_gpio_clear' follow drivers/built-in.o: In function `dcon_wiggle_xo_1': olpc_dcon_xo_1.c:(.text+0x359708): undefined reference to `cs5535_gpio_set' drivers/built-in.o: In function `dcon_init_xo_1': olpc_dcon_xo_1.c:(.text+0x35989b): undefined reference to `cs5535_gpio_clear' olpc_dcon_xo_1.c:(.text+0x3598b5): undefined reference to `cs5535_gpio_isset' olpc_dcon_xo_1.c:(.text+0x359963): undefined reference to `cs5535_gpio_setup_event' olpc_dcon_xo_1.c:(.text+0x359980): undefined reference to `cs5535_gpio_set_irq' olpc_dcon_xo_1.c:(.text+0x359a36): undefined reference to `cs5535_gpio_set'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Drake <dsd@laptop.org> Cc: Jens Frederich <jfrederich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4 |
|
#
7df68962 |
| 30-Jul-2013 |
Jens Frederich <jfrederich@gmail.com> |
staging: olpc_dcon: provide detailed FB_OLPC_DCON help section
The FB_OLPC_DCON help section is to short according to checkpatch.pl. We want more information about the controller type, its task, its
staging: olpc_dcon: provide detailed FB_OLPC_DCON help section
The FB_OLPC_DCON help section is to short according to checkpatch.pl. We want more information about the controller type, its task, its video pipeline position and so on.
There are no style issues, remove checkpatch.pl TODO entry.
Signed-off-by: Jens Frederich <jfrederich@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1 |
|
#
91e623de |
| 25-May-2011 |
Randy Dunlap <randy.dunlap@oracle.com> |
staging: fix olpc_dcon build, needs BACKLIGHT_CLASS_DEVICE
Fix olpc_dcon.c build by selecting the needed kconfig symbol BACKLIGHT_CLASS_DEVICE.
olpc_dcon.c:(.text+0x11588b): undefined reference to
staging: fix olpc_dcon build, needs BACKLIGHT_CLASS_DEVICE
Fix olpc_dcon.c build by selecting the needed kconfig symbol BACKLIGHT_CLASS_DEVICE.
olpc_dcon.c:(.text+0x11588b): undefined reference to `backlight_device_register'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andres Salomon <dilinger@queued.net> Cc: Chris Ball <cjb@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
Revision tags: v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2 |
|
#
bed4ab77 |
| 03-Apr-2011 |
Sascha Silbe <sascha-pgp@silbe.org> |
staging: fix olpc_dcon build errors
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c: In function ‘dcon_wiggle_xo_1_5’: drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c:155: error: implicit declaration of f
staging: fix olpc_dcon build errors
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c: In function ‘dcon_wiggle_xo_1_5’: drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c:155: error: implicit declaration of function ‘udelay’ drivers/built-in.o: In function `dcon_read_status_xo_1': olpc_dcon_xo_1.c:(.text+0x13472e): undefined reference to `cs5535_gpio_set'
Signed-off-by: Sascha Silbe <sascha-pgp@silbe.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
Revision tags: v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6 |
|
#
6a3a81e7 |
| 21-Feb-2011 |
Randy Dunlap <randy.dunlap@oracle.com> |
staging: fix olpc_dcon kconfig and build errors
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c:106: error: 'acpi_gbl_FADT' undeclared (first use in this function)
Fixing that one gives:
ERROR: "back
staging: fix olpc_dcon kconfig and build errors
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c:106: error: 'acpi_gbl_FADT' undeclared (first use in this function)
Fixing that one gives:
ERROR: "backlight_device_register" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "registered_fb" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "lock_fb_info" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "backlight_device_unregister" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "num_registered_fb" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "fb_blank" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Chris Ball <cjb@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Acked-By: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
Revision tags: v2.6.38-rc5 |
|
#
b07b846c |
| 10-Feb-2011 |
Andres Salomon <dilinger@queued.net> |
staging: olpc_dcon: drop CONFIG_BROKEN dependency
DCON builds properly now; we can drop the config dep on CONFIG_BROKEN.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroa
staging: olpc_dcon: drop CONFIG_BROKEN dependency
DCON builds properly now; we can drop the config dep on CONFIG_BROKEN.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
#
097cd83a |
| 10-Feb-2011 |
Andres Salomon <dilinger@queued.net> |
staging: olpc_dcon: add config options for XO_1 and XO_1_5, drop hardcoded XO-1 stuff
This adds CONFIG_FB_OLPC_DCON_1 and CONFIG_FB_OLPC_DCON_1_5 options for allowing selection of XO-1 and/or XO-1.5
staging: olpc_dcon: add config options for XO_1 and XO_1_5, drop hardcoded XO-1 stuff
This adds CONFIG_FB_OLPC_DCON_1 and CONFIG_FB_OLPC_DCON_1_5 options for allowing selection of XO-1 and/or XO-1.5 DCON support. In the process, it also forces the xo_1.c and xo_1_5.c files to build as separate units, correctly selects between XO-1 and XO-1.5 at runtime, and adds some hacks to allow xo_1_5.c to build.
This isn't the cleanest patch, but it'll get better as more global variables are dropped.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
Revision tags: v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7 |
|
#
a747d4b8 |
| 05-Oct-2010 |
Greg Kroah-Hartman <gregkh@suse.de> |
Staging: olpc_dcon: mark the driver as CONFIG_BROKEN for now
It doesn't build yet, as it depends on some changes that are not yet in the tree, so mark it as BROKEN for now until that gets resolved.
Staging: olpc_dcon: mark the driver as CONFIG_BROKEN for now
It doesn't build yet, as it depends on some changes that are not yet in the tree, so mark it as BROKEN for now until that gets resolved.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
Revision tags: v2.6.36-rc6 |
|
#
eecb3e4e |
| 24-Sep-2010 |
Andres Salomon <dilinger@queued.net> |
staging: olpc_dcon: add OLPC display controller (DCON) support
This adds DCON support for the OLPC XO. The DCON is found in XO-1 and XO-1.5 hardware. The XO-1 has a CS5536 southbridge, while the X
staging: olpc_dcon: add OLPC display controller (DCON) support
This adds DCON support for the OLPC XO. The DCON is found in XO-1 and XO-1.5 hardware. The XO-1 has a CS5536 southbridge, while the XO-1.5 has a Via chipset; the GPIO magic that's necessary to communicate with the DCON chip is unfortunately different across both platforms. This driver supports both.
This driver is in bad state atm, so I'm requesting its inclusion into staging so it can be cleaned up while staying in the kernel tree.
Original driver by Dave Woodhouse, and modified extensively by Jordan Crouse, myself, Deepak Saxena, Paul Fox, Daniel Drake, and probably others that I've missed.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show more ...
|
Revision tags: v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2 |
|
#
01b16aed |
| 25-Sep-2019 |
Jerry Lin <wahahab11@gmail.com> |
staging: olpc_dcon: fix wrong dependencies in Kconfig file To allow simultaneous support for XO-1 and XO-1.5. This module require GPIO_CS5535 (for 1.0) and ACPI (for 1.5) now. R
staging: olpc_dcon: fix wrong dependencies in Kconfig file To allow simultaneous support for XO-1 and XO-1.5. This module require GPIO_CS5535 (for 1.0) and ACPI (for 1.5) now. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190925074243.GA24947@compute1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12 |
|
#
e40219d5 |
| 05-Sep-2019 |
Jerry Lin <wahahab11@gmail.com> |
staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support This patch remove model related configuration. Since the module can decide which platform data to use itself base on cu
staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support This patch remove model related configuration. Since the module can decide which platform data to use itself base on current running olpc board. Also change module dependency from (GPIO_CS5535 || GPIO_CS5535=n) to (GPIO_CS5535 || ACPI) because original one does not make any sense and module only doing real work when GPIO_CS5535 or ACPI is setted. Remove kernel configurations: - FB_OLPC_DCON_1 - FB_OLPC_DCON_1_5 Signed-off-by: Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190906010613.GA562@compute1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
e0654264 |
| 14-May-2019 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - Remove unused BACKLIGHT_LCD_SUPPO
Merge tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - Remove unused BACKLIGHT_LCD_SUPPORT symbol - Remove unused BACKLIGHT_CLASS_DEVICE dependencies - Add DT support to lm3630a_bl Bug Fixes: - Fix error path issues in lm3630a_bl" * tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lm3630a: Add firmware node support dt-bindings: backlight: Add lm3630a bindings backlight: lm3630a: Return 0 on success in update_status functions video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
show more ...
|
Revision tags: v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17 |
|
#
8c5dc8d9 |
| 17-Jan-2019 |
Alexander Shiyan <shc_work@mail.ru> |
video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol We have two *_CLASS_DEVICE kernel config options (LCD_CLASS_DEVICE and BACKLIGHT_LCD_DEVICE) that do the same job.
video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol We have two *_CLASS_DEVICE kernel config options (LCD_CLASS_DEVICE and BACKLIGHT_LCD_DEVICE) that do the same job. The patch removes useless BACKLIGHT_LCD_SUPPORT option and converts LCD_CLASS_DEVICE into a menu. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
99b75a4e |
| 02-Apr-2019 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
staging: add missing SPDX lines to Kconfig files There are a few remaining drivers/staging/*/Kconfig files that do not have SPDX identifiers in them. Add the correct GPL-2.0 identifier
staging: add missing SPDX lines to Kconfig files There are a few remaining drivers/staging/*/Kconfig files that do not have SPDX identifiers in them. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9 |
|
#
33f49571 |
| 18-Sep-2018 |
Lubomir Rintel <lkundrak@v3.sk> |
staging: olpc_dcon: add a missing dependency WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
staging: olpc_dcon: add a missing dependency WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - FB_OLPC_DCON [=y] && STAGING [=y] && X86 [=y] && OLPC [=y] && FB [=y] && I2C [=y] && (GPIO_CS5535 [=n] || GPIO_CS5535 [=n]=n) Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|