i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

show more ...

media: atomisp-gc0310: use v4l2_find_nearest_size()

Instead of reinventing the wheel, use v4l2_find_nearest_size()
in order to get the closest resolution.

This should address a bug where the wrong

media: atomisp-gc0310: use v4l2_find_nearest_size()

Instead of reinventing the wheel, use v4l2_find_nearest_size()
in order to get the closest resolution.

This should address a bug where the wrong resolution was
selected.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: v4l2-subdev: add subdev-wide state struct

We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs i

media: v4l2-subdev: add subdev-wide state struct

We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.

I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.

This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.

The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:

dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done

Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:

For drivers/media/i2c/s5k5baf.c:

@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;

For drivers/media/platform/s3c-camif/camif-capture.c:

@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;

- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;

- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;

The semantic patch is:

// <smpl>

// Change function parameter

@@
identifier func;
identifier cfg;
@@

func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}

// Change function declaration parameter

@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);

// Change function return value

@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}

// Change function declaration return value

@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);

// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.

@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };

<+...

(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)

...+>
}

// If the function uses fields from pad_config, access via state->pads

@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}

// If the function accesses the filehandle, use fh->state instead

@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state

@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state

// Start of vsp1 specific

@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};

@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}

@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}

@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}

// End of vsp1 specific

// Start of rcar specific

@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}

// End of rcar specific

// Start of rockchip specific

@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@

func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}

@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@

func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}

@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@

rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}

// End of rockchip specific

// Start of tegra-video specific

@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}

@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}

// End of tegra-video specific

// </smpl>

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: staging: media: atomisp: remove unnecessary pr_info calls

pr_info() messages to log function entry / exit tracing spams the log.
Such basic tracing is not necessary and be removed.

Signed-of

media: staging: media: atomisp: remove unnecessary pr_info calls

pr_info() messages to log function entry / exit tracing spams the log.
Such basic tracing is not necessary and be removed.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: staging: media: atomisp: replace raw pr_*() by dev_dbg()

It is recommended to use driver model diagnostic macros dev_*() instead
of raw printk() or pr_*() since the former ensures that the lo

media: staging: media: atomisp: replace raw pr_*() by dev_dbg()

It is recommended to use driver model diagnostic macros dev_*() instead
of raw printk() or pr_*() since the former ensures that the log messages
are always associated with the corresponding device and driver. This also
addresses the checkpatch complain for not using KERN_<LEVEL> facility in
printk() call.

Suggested-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: staging: atomisp: Corrected error handling in function

This patch fixes check of a result of 'power_up()' function call in
function 'gc0310_s_power()' to do "error handling" instead of "succe

media: staging: atomisp: Corrected error handling in function

This patch fixes check of a result of 'power_up()' function call in
function 'gc0310_s_power()' to do "error handling" instead of "success
handling" as Dan Carpenter noted in his comment on the previous patch.
Lines 'return gc0310_init(sd)' and 'return ret' are swapped, and direct
value of 'ret' is checked in IF statement now.

Link: https://lore.kernel.org/linux-media/20201006202903.GA8346@linux
Signed-off-by: Leonid Kushnir <leonf008@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: staging: atomisp: Removed else branch in function

This patch fixes the checkpatch.pl warning :

WARNING: else is not generally useful after a break or return

Expressions under 'else' branch

media: staging: atomisp: Removed else branch in function

This patch fixes the checkpatch.pl warning :

WARNING: else is not generally useful after a break or return

Expressions under 'else' branch in function 'gc0310_s_power' are
executed whenever the exppression in 'if' is False. Otherwise, return
from function occurs. Therefore, there is no need in 'else', and it has
been removed.

Link: https://lore.kernel.org/linux-media/20201006081721.GA35979@linux
Signed-off-by: Leonid Kushnir <leonf008@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: staging: atomisp: Fixed allignment to match open parenthesis

Moved the parameters of the function '__gc0310_write_reg_is_consecutive'
to the right under open parenthesis to fix warning messag

media: staging: atomisp: Fixed allignment to match open parenthesis

Moved the parameters of the function '__gc0310_write_reg_is_consecutive'
to the right under open parenthesis to fix warning message from
checkpatch.pl: 'CHECK: Alignment should match open parenthesis'.

Link: https://lore.kernel.org/linux-media/20201005094107.GA44033@linux
Signed-off-by: Leonid Kushnir <leonf008@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: Revert "media: atomisp: Add some ACPI detection info"

This reverts commit 0d64e9420583cbc3c4a3f949ebe38fd8f7769281.

As gmin_subdev_add() now takes the ACPI handle directly,
we can deprecate

media: Revert "media: atomisp: Add some ACPI detection info"

This reverts commit 0d64e9420583cbc3c4a3f949ebe38fd8f7769281.

As gmin_subdev_add() now takes the ACPI handle directly,
we can deprecate the code that were doing this inside each
I2C driver.

PS.: This also reverts commit c03496b3bd92 ("media: atomisp: add a notice about possible leak resources")

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: atomisp: add SPDX headers

This driver is licensed under GPL 2.0, as stated inside their
headers.

Add the proper tag there. We should probably latter cleanup
the reduntant licensing text, but

media: atomisp: add SPDX headers

This driver is licensed under GPL 2.0, as stated inside their
headers.

Add the proper tag there. We should probably latter cleanup
the reduntant licensing text, but this could be done later,
after we get rid of other abstraction layers.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: atomisp: do another round of coding style cleanup

Run checkpatch --fix-inline again, in order to get rid
of some additional issues that got introduced (or that
checkpatch can now detect).

Th

media: atomisp: do another round of coding style cleanup

Run checkpatch --fix-inline again, in order to get rid
of some additional issues that got introduced (or that
checkpatch can now detect).

This should help preventing receiving random cleanups,
while keeping the code on a better shape.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: atomisp: add a notice about possible leak resources

Calling acpi_bus_get_device() may end allocating resources that
aren't freed. So, add a notice about that, as, if those drivers
get out of

media: atomisp: add a notice about possible leak resources

Calling acpi_bus_get_device() may end allocating resources that
aren't freed. So, add a notice about that, as, if those drivers
get out of staging, we may need some changes.

Fixes: 0d64e9420583 ("media: atomisp: Add some ACPI detection info")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: atomisp: Add some ACPI detection info

When someone would report problems with a new device, we
need to know the DMI product ID and the ACPI name for the
detected sensor. So, print them at dme

media: atomisp: Add some ACPI detection info

When someone would report problems with a new device, we
need to know the DMI product ID and the ACPI name for the
detected sensor. So, print them at dmesg.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: atomisp: do lots of other coding style cleanups

Use some auto-reformat tools to make the atomisp style
a little better. There are still lots of weird things there,
but this will hopefully red

media: atomisp: do lots of other coding style cleanups

Use some auto-reformat tools to make the atomisp style
a little better. There are still lots of weird things there,
but this will hopefully reduce the number of pure coding
style patches submitted upstream.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: atomisp: fix several coding style issues

Use checkpatch.pl --fix-inplace --strict to solve several
coding style issues, manually reviewing the produced code and
fixing some troubles caused by

media: atomisp: fix several coding style issues

Use checkpatch.pl --fix-inplace --strict to solve several
coding style issues, manually reviewing the produced code and
fixing some troubles caused by checkpatch.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: atomisp: fix several typos

Running checkpatch.pl codespell logic found several typos at atomisp
driver.

Fix them using --fix-inline.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@ker

media: atomisp: fix several typos

Running checkpatch.pl codespell logic found several typos at atomisp
driver.

Fix them using --fix-inline.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

Revert "media: staging: atomisp: Remove driver"

There are some interest on having this driver back, and I
can probably dedicate some time to address its issue. So,
let's ressurect it.

For now, the

Revert "media: staging: atomisp: Remove driver"

There are some interest on having this driver back, and I
can probably dedicate some time to address its issue. So,
let's ressurect it.

For now, the driver causes a recursive error and doesn't
build, so, make it depend on BROKEN.

This reverts commit 51b8dc5163d2ff2bf04019f8bf7e3bd0e75bb654.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

show more ...

media: atomisp-gc0310: return errors at gc0310_init()

If something wrong gets there, return the error.

Get rid of this warning:

drivers/staging/media/atomisp/i2c/atomisp-gc0310.c: In function 'g

media: atomisp-gc0310: return errors at gc0310_init()

If something wrong gets there, return the error.

Get rid of this warning:

drivers/staging/media/atomisp/i2c/atomisp-gc0310.c: In function 'gc0310_init':
drivers/staging/media/atomisp/i2c/atomisp-gc0310.c:713:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^~~

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

show more ...

media: staging: atomisp: get rid of some static warnings

Get rid of those warnings:

drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/tdf/tdf_1.0/ia_css_tdf.host.c:18:15: warning:

media: staging: atomisp: get rid of some static warnings

Get rid of those warnings:

drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/tdf/tdf_1.0/ia_css_tdf.host.c:18:15: warning: symbol 'g_pyramid' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/mmu/sh_mmu_mrfld.c:66:23: warning: symbol 'sh_mmu_mrfld' was not declared. Should it be static?
drivers/staging/media/atomisp/i2c/gc0310.h:381:26: warning: symbol 'gc0310_res_preview' was not declared. Should it be static?
drivers/staging/media/atomisp/i2c/atomisp-gc0310.c:622:25: warning: symbol 'gc0310_controls' was not declared. Should it be static?
drivers/staging/media/atomisp/i2c/ov2722.h:1099:26: warning: symbol 'ov2722_res_preview' was not declared. Should it be static?
drivers/staging/media/atomisp/i2c/atomisp-ov2722.c:574:25: warning: symbol 'ov2722_controls' was not declared. Should it be static?
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:727:25: warning: symbol 'ov2680_controls' was not declared. Should it be static?
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:1090:26: warning: symbol 'ov5693_res_preview' was not declared. Should it be static?
drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c:958:5: warning: symbol 'ad5823_t_focus_abs' was not declared. Should it be static?
drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c:1139:25: warning: symbol 'ov5693_controls' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_css20.c:91:6: warning: symbol 'atomisp_css2_hw_store_8' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_css20.c:129:10: warning: symbol 'atomisp_css2_hw_load_16' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_css20.c:139:10: warning: symbol 'atomisp_css2_hw_load_32' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_css20.c:2868:14: warning: symbol 'atomisp_get_pipe_index' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:5165:5: warning: symbol 'configure_pp_input_nop' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:5171:5: warning: symbol 'configure_output_nop' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:5179:5: warning: symbol 'get_frame_info_nop' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:6630:5: warning: symbol 'atomisp_get_pipe_id' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/input_formatter.c:48:12: warning: symbol 'HIVE_IF_BIN_COPY' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c:1610:6: warning: symbol '__wdt_on_master_slave_sensor' was not declared. Should it be static?

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: staging: atomisp: i2c: Drop g_parm support in sensor drivers

These drivers already support g_frame_interval. Therefore just dropping
g_parm is enough.

Signed-off-by: Sakari Ailus <sakari.ail

media: staging: atomisp: i2c: Drop g_parm support in sensor drivers

These drivers already support g_frame_interval. Therefore just dropping
g_parm is enough.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: staging: atomisp: Kill subdev s_parm abuse

Remove sensor driver's interface for setting the use case specific mode
list as well as the mode lists that are related to other than
CI_MODE_PREVIE

media: staging: atomisp: Kill subdev s_parm abuse

Remove sensor driver's interface for setting the use case specific mode
list as well as the mode lists that are related to other than
CI_MODE_PREVIEW. This removes s_parm abuse in using driver specific values
in v4l2_streamparm.capture.capturemode. The drivers already support
[gs]_frame_interval so removing support for [gs]_parm is enough.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: staging: atomisp: Remove non-ACPI leftovers

Since all drivers are solely requiring ACPI enumeration, there is no
need to additionally check for legacy platform data or ACPI handle.

Remove le

media: staging: atomisp: Remove non-ACPI leftovers

Since all drivers are solely requiring ACPI enumeration, there is no
need to additionally check for legacy platform data or ACPI handle.

Remove leftovers from the sensors and platform code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: staging: atomisp: Remove unused members of camera_sensor_platform_data

Remove unused members along with dead code.

Mostly done with help of coccinelle.

Signed-off-by: Andy Shevchenko <andri

media: staging: atomisp: Remove unused members of camera_sensor_platform_data

Remove unused members along with dead code.

Mostly done with help of coccinelle.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: staging: atomisp: Remove ->power_ctrl() callback

There is redundant callback which does nothing in upstreamed version of
the driver.

Remove it along with user call places.

Mostly done with

media: staging: atomisp: Remove ->power_ctrl() callback

There is redundant callback which does nothing in upstreamed version of
the driver.

Remove it along with user call places.

Mostly done with help of coccinelle.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: staging: atomisp: Remove ->gpio_ctrl() callback

There is redundant callback which does nothing in upstreamed version of
the driver.

Remove it along with user call places.

Mostly done with h

media: staging: atomisp: Remove ->gpio_ctrl() callback

There is redundant callback which does nothing in upstreamed version of
the driver.

Remove it along with user call places.

Mostly done with help of coccinelle.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...