Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power

Merge tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power domain providers in
drivers/genpd and starts moving some of the corresponding code in
there.

We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the
soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
better overall view of what goes on in the area, I will help out with
maintenance"

[ I find the "genpd" name singularly uninformative, so we'll probably
end up moving this driver subsystem somewhere else, but that's still
being discussed - Linus ]

* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
genpd: ti: Use for_each_node_with_property() simplify code logic
genpd: Explicitly include correct DT includes
genpd: imx: scu-pd: initialize is_off according to HW state
genpd: imx: scu-pd: Suppress bind attrs
genpd: imx: scu-pd: do not power off console if no_console_suspend
genpd: imx: scu-pd: add more PDs
genpd: imx: scu-pd: enlarge PD range
genpd: imx: relocate scu-pd under genpd
MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
genpd: Makefile: build imx
genpd: move owl-sps-helper.c from drivers/soc
soc: starfive: remove stale Makefile entry
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
...

show more ...

Merge branch 'genpd_create_dir' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into drivers-for-6.6

Merge the topic branch that introduces the genpd subsystem into the
Qualcomm soc d

Merge branch 'genpd_create_dir' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into drivers-for-6.6

Merge the topic branch that introduces the genpd subsystem into the
Qualcomm soc driver tree, in order to deal with patches landed in the
Qualcomm rpmhpd driver already in this cycle.

show more ...

Merge tag 'genpd-v6.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into v6.6/drivers-genpd

Create the new genpd subsystem and start moving providers

There are currently ~60

Merge tag 'genpd-v6.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into v6.6/drivers-genpd

Create the new genpd subsystem and start moving providers

There are currently ~60 users of the genpd provider interface, which
implementations are sprinkled across various subsystems. To help out with
maintenance and to gain a bit better control, this creates a new subsystem
(drivers/genpd) and moves some of the soc/platform specific providers in
here.

show more ...

Merge branch 'genpd_create_dir' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into soc/drivers

* 'genpd_create_dir' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:

Merge branch 'genpd_create_dir' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into soc/drivers

* 'genpd_create_dir' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
soc: rockchip: Mover power-domain driver to the genpd dir
soc: renesas: Move power-domain drivers to the genpd dir
soc: qcom: Move power-domain drivers to the genpd dir
soc: mediatek: Move power-domain drivers to the genpd dir
soc: imx: Move power-domain drivers to the genpd dir
soc: bcm: Move power-domain drivers to the genpd dir
soc: apple: Move power-domain driver to the genpd dir
soc: amlogic: Move power-domain drivers to the genpd dir
soc: actions: Move power-domain driver to the genpd dir
genpd: Create a new subsystem directory to host genpd providers

Link: https://lore.kernel.org/r/20230714092301.28690-1-ulf.hansson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

soc: rockchip: Mover power-domain driver to the genpd dir

To simplify with maintenance let's move the rockchip power-domain driver to
the new genpd directory. Going forward, patches are intended to

soc: rockchip: Mover power-domain driver to the genpd dir

To simplify with maintenance let's move the rockchip power-domain driver to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.

Cc: Heiko Stuebner <heiko@sntech.de>
Cc: <linux-rockchip@lists.infradead.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus one new
device ID for an x86 laptop. Nothing that really stands out with
particularly big impact outside of the affected device.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the 5.18 fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes that went thru perf/urgent and now are fixed by an
upcoming patch.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redha

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes that went thru perf/urgent and now are fixed by an
upcoming patch.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code an

Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.

Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.

Specifics:

- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).

- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).

- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).

- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).

- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).

- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).

- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).

- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).

- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).

- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).

- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).

- Optimize the haltpoll cpuidle driver a bit (Li RongQing).

- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).

- Fix load_image_and_restore() error path (Ye Bin).

- Fix typos in comments in the system wakeup hadling code (Tom Rix).

- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).

- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).

- Add device name to suspend_report_result() (Youngjin Jang).

- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).

- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).

- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).

- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).

- Document Intel uncore frequency scaling (Srinivas Pandruvada).

- Add DTPM hierarchy description (Daniel Lezcano).

- Change the locking scheme in DTPM (Daniel Lezcano).

- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).

- Make dtpm_node_callback[] static (kernel test robot).

- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).

- Add tracer tool for the amd-pstate driver (Jinzhou Su).

- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).

- Add AMD P-State support to the cpupower utility (Huang Rui)"

* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...

show more ...

Merge branch 'powercap'

Merge Dynamic Thermal Power Management (DTPM) changes for 5.18-rc1:

- Add DTPM hierarchy description (Daniel Lezcano).

- Change the locking scheme in DTPM (Daniel Lezcano

Merge branch 'powercap'

Merge Dynamic Thermal Power Management (DTPM) changes for 5.18-rc1:

- Add DTPM hierarchy description (Daniel Lezcano).

- Change the locking scheme in DTPM (Daniel Lezcano).

- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).

- Make dtpm_node_callback[] static (kernel test robot).

- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).

* powercap:
powercap: DTPM: Fix spelling mistake "initialze" -> "initialize"
powercap: DTPM: dtpm_node_callback[] can be static
dtpm/soc/rk3399: Add the ability to unload the module
powercap/dtpm_cpu: Add exit function
powercap/dtpm: Move the 'root' reset place
powercap/dtpm: Destroy hierarchy function
powercap/dtpm: Fixup kfree for virtual node
powercap/dtpm_cpu: Reset per_cpu variable in the release function
powercap/dtpm: Change locking scheme
rockchip/soc/drivers: Add DTPM description for rk3399
powercap/drivers/dtpm: Add dtpm devfreq with energy model support
powercap/drivers/dtpm: Add CPU DT initialization support
powercap/drivers/dtpm: Add hierarchy creation
powercap/drivers/dtpm: Convert the init table section to a simple array

show more ...

Merge tag 'dtpm-v5.18' of https://git.linaro.org/people/daniel.lezcano/linux

Pull DTPM (Dynamic Thermal Power Management) changes for 5.18-rc1 from
Daniel Lezcano:

"- Added dtpm hierarchy descripti

Merge tag 'dtpm-v5.18' of https://git.linaro.org/people/daniel.lezcano/linux

Pull DTPM (Dynamic Thermal Power Management) changes for 5.18-rc1 from
Daniel Lezcano:

"- Added dtpm hierarchy description (Daniel Lezcano)

- Changed the locking scheme (Daniel Lezcano)

- Fixed dtpm_cpu cleanup at exit time and missing virtual dtpm pointer
release (Daniel Lezcano)"

* tag 'dtpm-v5.18' of https://git.linaro.org/people/daniel.lezcano/linux:
dtpm/soc/rk3399: Add the ability to unload the module
powercap/dtpm_cpu: Add exit function
powercap/dtpm: Move the 'root' reset place
powercap/dtpm: Destroy hierarchy function
powercap/dtpm: Fixup kfree for virtual node
powercap/dtpm_cpu: Reset per_cpu variable in the release function
powercap/dtpm: Change locking scheme
rockchip/soc/drivers: Add DTPM description for rk3399
powercap/drivers/dtpm: Add dtpm devfreq with energy model support
powercap/drivers/dtpm: Add CPU DT initialization support
powercap/drivers/dtpm: Add hierarchy creation
powercap/drivers/dtpm: Convert the init table section to a simple array

show more ...

rockchip/soc/drivers: Add DTPM description for rk3399

The DTPM framework does support now the hierarchy description.

The platform specific code can call the hierarchy creation function
with an arra

rockchip/soc/drivers: Add DTPM description for rk3399

The DTPM framework does support now the hierarchy description.

The platform specific code can call the hierarchy creation function
with an array of struct dtpm_node pointing to their parent.

This patch provides a description of the big / Little CPUs and the
GPU and tie them together under a virtual 'package' name. Only rk3399 is
described now.

The description could be extended in the future with the memory
controller with devfreq.

The description is always a module and it describes the soft
dependencies. The userspace has to load the softdeps module in the
right order.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by; Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220128163537.212248-6-daniel.lezcano@linaro.org

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.

Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.

Merge branch 'for-5.11/elecom' into for-linus

- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma