|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35 |
|
| #
410da7e3 |
| 19-Jun-2023 |
Stephan Gerhold <stephan@gerhold.net> |
soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm
icc_smd_rpm will do bus clock votes itself rather than taking the
unnecessary detour through the clock subsystem. However, it can onl
soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm
icc_smd_rpm will do bus clock votes itself rather than taking the
unnecessary detour through the clock subsystem. However, it can only
do that after the clocks have been handed off and scaling has been
enabled in the RPM in clk-smd-rpm.
Move the icc_smd_rpm registration from smd-rpm.c to clk-smd-rpm.c
to avoid any possible races. icc_smd_rpm gets the driver data from
the smd-rpm device, so still register the platform device on the
smd-rpm parent device.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Konrad: remove unrelated cleanups]
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-5-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
| #
bcabe1e0 |
| 15-Jun-2023 |
Stephan Gerhold <stephan@gerhold.net> |
soc: qcom: smd-rpm: Match rpmsg channel instead of compatible
There is an ever growing list of compatibles in the smd-rpm.c driver.
A fallback compatible would help here but would still require keep
soc: qcom: smd-rpm: Match rpmsg channel instead of compatible
There is an ever growing list of compatibles in the smd-rpm.c driver.
A fallback compatible would help here but would still require keeping
the current list around for backwards compatibility.
As an alternative, let's switch the driver to match the rpmsg_device_id
instead, which is always "rpm_requests" on all platforms. Add a check
to ensure that there is a device tree node defined for the device since
otherwise the of_platform_populate() call will operate on the root node (/).
Similar approaches with matching rpmsg_device_id are already used in
qcom_sysmon, qcom_glink_ssr, qrtr, and rpmsg_wwan_ctrl.
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375 (G-Link)
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-4-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
|
Revision tags: v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21 |
|
| #
5808c532 |
| 20-Mar-2023 |
Rob Clark <robdclark@chromium.org> |
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
Preparing for better lockdep annotations for things that happen in runpm
suspend/resume path vs shrinker/reclaim in the following patches, we
need to
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
Preparing for better lockdep annotations for things that happen in runpm
suspend/resume path vs shrinker/reclaim in the following patches, we
need to avoid allocations that can trigger reclaim in the icc_set_bw()
path. In the RPMh case, rpmh_write_batch() already uses GFP_ATOMIC, so
it should be reasonable to use in the smd-rpm case as well.
Alternatively, 256bytes is small enough for a function that isn't called
recursively to allocate on-stack.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230320144356.803762-21-robdclark@gmail.com
show more ...
|
|
Revision tags: v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6 |
|
| #
64dc69f3 |
| 13-Jan-2023 |
devi priya <quic_devipriy@quicinc.com> |
soc: qcom: smd-rpm: Add IPQ9574 compatible
Adding compatible string to support RPM communication over SMD for
IPQ9574 SoC
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: P
soc: qcom: smd-rpm: Add IPQ9574 compatible
Adding compatible string to support RPM communication over SMD for
IPQ9574 SoC
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113150310.29709-2-quic_devipriy@quicinc.com
show more ...
|
|
Revision tags: v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70 |
|
| #
a30c3c6a |
| 20-Sep-2022 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
soc: qcom: smd-rpm: Add SM6375 compatible
Add a compatible for the SM6375 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Si
soc: qcom: smd-rpm: Add SM6375 compatible
Add a compatible for the SM6375 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220921004534.151990-2-konrad.dybcio@somainline.org
show more ...
|
| #
1e9dd807 |
| 26-Sep-2022 |
Gustavo A. R. Silva <gustavoars@kernel.org> |
soc: qcom: smd-rpm: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace z
soc: qcom: smd-rpm: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for flexible-array members in unions.
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/224
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/YzIvNIyPhWaG2DTr@work
show more ...
|
|
Revision tags: v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53 |
|
| #
73579f2a |
| 05-Jul-2022 |
Stephan Gerhold <stephan.gerhold@kernkonzept.com> |
soc: qcom: smd-rpm: Add compatible for MSM8909
Add the new "qcom,rpm-msm8909" compatible to the driver so the interface
to the Resource Power Manager (RPM) is initialized correctly on MSM8909.
Sign
soc: qcom: smd-rpm: Add compatible for MSM8909
Add the new "qcom,rpm-msm8909" compatible to the driver so the interface
to the Resource Power Manager (RPM) is initialized correctly on MSM8909.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-3-stephan.gerhold@kernkonzept.com
show more ...
|
|
Revision tags: v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65 |
|
| #
3e035cbd |
| 13-Sep-2021 |
Shawn Guo <shawn.guo@linaro.org> |
soc: qcom: smd-rpm: Add QCM2290 compatible
Add compatible for QCM2290 SoC support.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link:
soc: qcom: smd-rpm: Add QCM2290 compatible
Add compatible for QCM2290 SoC support.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210914015349.29295-3-shawn.guo@linaro.org
show more ...
|
|
Revision tags: v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61 |
|
| #
e972a290 |
| 25-Aug-2021 |
Vladimir Lypak <vladimir.lypak@gmail.com> |
soc: qcom: smd-rpm: Add compatible for MSM8953 SoC
Add a compatible for MSM8953
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Sign
soc: qcom: smd-rpm: Add compatible for MSM8953 SoC
Add a compatible for MSM8953
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210825170151.19698-1-sireeshkodali1@gmail.com
show more ...
|
|
Revision tags: v5.10.60 |
|
| #
593cb55b |
| 31-Jul-2021 |
Iskren Chernev <iskren.chernev@gmail.com> |
soc: qcom: smd-rpm: Add SM6115 compatible
Add a compatible for SM6115
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210731164827.2756798-3-iskren.cherne
soc: qcom: smd-rpm: Add SM6115 compatible
Add a compatible for SM6115
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210731164827.2756798-3-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35 |
|
| #
d8ea59e7 |
| 02-May-2021 |
Bartosz Dudziak <bartosz.dudziak@snejp.pl> |
soc: qcom: smd-rpm: Add MSM8226 compatible
Add a compatible for the RPM on the Qualcomm MSM8226 platform.
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Link: https://lore.kernel.org/r/2
soc: qcom: smd-rpm: Add MSM8226 compatible
Add a compatible for the RPM on the Qualcomm MSM8226 platform.
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Link: https://lore.kernel.org/r/20210502122027.9351-3-bartosz.dudziak@snejp.pl
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
055c9aff |
| 23-May-2021 |
Martin Botka <martin.botka@somainline.org> |
soc: qcom: smd-rpm: Add SM6125 compatible
Add a compatible for SM6125
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210523211556.731976-1-martin.botka@
soc: qcom: smd-rpm: Add SM6125 compatible
Add a compatible for SM6125
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210523211556.731976-1-martin.botka@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54 |
|
| #
e434e0c4 |
| 29-Jul-2020 |
Krzysztof Kozlowski <krzk@kernel.org> |
soc: qcom: smd-rpm: Fix kerneldoc
Fix W=1 compile warnings (invalid kerneldoc):
drivers/soc/qcom/smd-rpm.c:35: warning: Function parameter or member 'dev' not described in 'qcom_smd_rpm'
dr
soc: qcom: smd-rpm: Fix kerneldoc
Fix W=1 compile warnings (invalid kerneldoc):
drivers/soc/qcom/smd-rpm.c:35: warning: Function parameter or member 'dev' not described in 'qcom_smd_rpm'
drivers/soc/qcom/smd-rpm.c:99: warning: Function parameter or member 'state' not described in 'qcom_rpm_smd_write'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200729074415.28393-2-krzk@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.7.10, v5.4.53 |
|
| #
84da0cf9 |
| 20-Jul-2020 |
Kathiravan T <kathirav@codeaurora.org> |
soc: qcom: smd-rpm: Add IPQ6018 compatible
This patch adds a compatible for the rpm on the Qualcomm IPQ6018 platform.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Link: https://lore.kernel
soc: qcom: smd-rpm: Add IPQ6018 compatible
This patch adds a compatible for the rpm on the Qualcomm IPQ6018 platform.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Link: https://lore.kernel.org/r/1595225543-12127-3-git-send-email-kathirav@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44 |
|
| #
a9541d2e |
| 02-Jun-2020 |
Konrad Dybcio <konradybcio@gmail.com> |
soc: qcom: smd-rpm: Add msm8994 compatible
Add the compatible for the RPM in msm8994.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore
soc: qcom: smd-rpm: Add msm8994 compatible
Add the compatible for the RPM in msm8994.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200602200407.320908-1-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
d6e52482 |
| 13-Jun-2020 |
Konrad Dybcio <konradybcio@gmail.com> |
drivers: soc: Add MSM8936 SMD RPM compatible
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/2020061307
drivers: soc: Add MSM8936 SMD RPM compatible
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20200613072745.1249003-4-vincent.knecht@mailoo.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2 |
|
| #
83a81c1b |
| 21-Sep-2019 |
Angelo G. Del Regno <kholk11@gmail.com> |
soc: qcom: smd-rpm: Add MSM8976 compatible
Add a compatible for the RPM on the Qualcomm MSM8976 platform:
this is also valid for MSM8956 and their APQ variants.
Signed-off-by: Angelo G. Del Regno <
soc: qcom: smd-rpm: Add MSM8976 compatible
Add a compatible for the RPM on the Qualcomm MSM8976 platform:
this is also valid for MSM8956 and their APQ variants.
Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3 |
|
| #
66e6a633 |
| 23-Jul-2019 |
Georgi Djakov <georgi.djakov@linaro.org> |
soc: qcom: smd-rpm: Create RPM interconnect proxy child device
Register a platform device to handle the communication of bus bandwidth
requests with the remote processor. The interconnect proxy devi
soc: qcom: smd-rpm: Create RPM interconnect proxy child device
Register a platform device to handle the communication of bus bandwidth
requests with the remote processor. The interconnect proxy device is part
of this remote processor (RPM) hardware. Let's create a icc-smd-rpm proxy
child device to represent the bus throughput functionality that is provided
by the RPM.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
| #
97fb5e8d |
| 29-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18 |
|
| #
4e2256d3 |
| 11-Aug-2018 |
Craig Tatlor <ctatlor97@gmail.com> |
soc: qcom: smd-rpm: Add sdm660 compatible
Add the compatible for the RPM in SDM660, so that rpm resources can be
made available.
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Bjo
soc: qcom: smd-rpm: Add sdm660 compatible
Add the compatible for the RPM in SDM660, so that rpm resources can be
made available.
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
show more ...
|
| #
b7e38617 |
| 19-Sep-2018 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
soc: qcom: smd-rpm: Add QCS404 compatible
This patch adds a compatible for the rpm on the Qualcomm QCS404 platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Ko
soc: qcom: smd-rpm: Add QCS404 compatible
This patch adds a compatible for the rpm on the Qualcomm QCS404 platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
show more ...
|
|
Revision tags: v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
| #
64bf6b26 |
| 27-Mar-2018 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
soc: qcom: smd-rpm: Add msm8998 compatible
Add the compatible for the RPM in MSM8998, so that rpm resources can be
made available.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Review
soc: qcom: smd-rpm: Add msm8998 compatible
Add the compatible for the RPM in MSM8998, so that rpm resources can be
made available.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
show more ...
|
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7 |
|
| #
2b624250 |
| 28-Mar-2017 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
soc: qcom: smd-rpm: Add msm8996 compatibility
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM
driver ontop of GLINK for 8996, without any modifications.
Acked-by: Andy Gross <and
soc: qcom: smd-rpm: Add msm8996 compatibility
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM
driver ontop of GLINK for 8996, without any modifications.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
| #
5052de8d |
| 28-Mar-2017 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
soc: qcom: smd: Transition client drivers from smd to rpmsg
By moving these client drivers to use RPMSG instead of the direct SMD
API we can reuse them ontop of the newly added GLINK wire-protocol
s
soc: qcom: smd: Transition client drivers from smd to rpmsg
By moving these client drivers to use RPMSG instead of the direct SMD
API we can reuse them ontop of the newly added GLINK wire-protocol
support found in the 820 and 835 Qualcomm platforms.
As the new (RPMSG-based) and old SMD implementations are mutually
exclusive we have to change all client drivers in one commit, to make
sure we have a working system before and after this transition.
Acked-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
|
Revision tags: v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1 |
|
| #
b853cb96 |
| 28-Mar-2016 |
Bjorn Andersson <bjorn.andersson@linaro.org> |
soc: qcom: smd: Make callback pass channel reference
By passing the smd channel reference to the callback, rather than the
smd device, we can open additional smd channels from sub-devices of smd
dev
soc: qcom: smd: Make callback pass channel reference
By passing the smd channel reference to the callback, rather than the
smd device, we can open additional smd channels from sub-devices of smd
devices.
Also updates the two smd clients today found in mainline.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
show more ...
|