soc: bcm: brcmstb: Remove bare-metal ARM suspend/resume code

Since 2018 these platforms have supported entry via the ARM Trusted
Firmware using the standard PSCI SYSTEM_SUSPEND function calls. Remov

soc: bcm: brcmstb: Remove bare-metal ARM suspend/resume code

Since 2018 these platforms have supported entry via the ARM Trusted
Firmware using the standard PSCI SYSTEM_SUSPEND function calls. Remove
this legacy code.

Link: https://lore.kernel.org/r/20230224215249.239405-1-f.fainelli@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)

This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.

This requires quite a lot of code in order

soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)

This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.

This requires quite a lot of code in order to deal with the
different HW blocks that need to be quiesced during suspend:

- DDR PHY
- DDR memory controller and arbiter
- control processor

The final steps of the suspend execute in cache and there is is a little
bit of assembly code in order to shut down the DDR PHY PLL and then go
into a wait loop until a wake-up even occurs. Conversely the resume part
involves waiting for the DDR PHY PLL to come back up and resume
executions where we left.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)

This commit adds support for the Broadcom STB S2/S3/S5 suspend states on
ARM based SoCs.

This requires quite a lot of code in order

soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)

This commit adds support for the Broadcom STB S2/S3/S5 suspend states on
ARM based SoCs.

This requires quite a lot of code in order to deal with the different HW
blocks that need to be quiesced during suspend:

- DDR PHY SHIM
- DDR memory controller and sequencer
- control processor

The final steps of the suspend execute in an on-chip SRAM and there is a
little bit of assembly code in order to shut down the DDR PHY PLL and
then go into a wfi loop until a wake-up even occurs. Conversely the
resume part involves waiting for the DDR PHY PLL to come back up and
resume executions where we left.

For S3, because of our memory hashing (actual hashing code not included
for simplicity, and is bypassed) we need to relocate the writable
variables (stack) into SRAM shortly before suspending in order to leave
the DRAM untouched and create a reliable hash of its contents.

This code has been contributed by Brian Norris initially and has been
incrementally fixed and updated to support new chips by a lot of people.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Gareth Powell <gpowell@broadcom.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These file

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)

This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.

This requires quite a

soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)

This commit adds support for the Broadcom STB S2/S3/S5 suspend
states on MIPS based SoCs.

This requires quite a lot of code in order to deal with the
different HW blocks that need to be quiesced during suspend:

- DDR PHY
- DDR memory controller and arbiter
- control processor

The final steps of the suspend execute in cache and there is is a little
bit of assembly code in order to shut down the DDR PHY PLL and then go
into a wait loop until a wake-up even occurs. Conversely the resume part
involves waiting for the DDR PHY PLL to come back up and resume
executions where we left.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)

This commit adds support for the Broadcom STB S2/S3/S5 suspend states on
ARM based SoCs.

This requires quite a l

soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)

This commit adds support for the Broadcom STB S2/S3/S5 suspend states on
ARM based SoCs.

This requires quite a lot of code in order to deal with the different HW
blocks that need to be quiesced during suspend:

- DDR PHY SHIM
- DDR memory controller and sequencer
- control processor

The final steps of the suspend execute in an on-chip SRAM and there is a
little bit of assembly code in order to shut down the DDR PHY PLL and
then go into a wfi loop until a wake-up even occurs. Conversely the
resume part involves waiting for the DDR PHY PLL to come back up and
resume executions where we left.

For S3, because of our memory hashing (actual hashing code not included
for simplicity, and is bypassed) we need to relocate the writable
variables (stack) into SRAM shortly before suspending in order to leave
the DRAM untouched and create a reliable hash of its contents.

This code has been contributed by Brian Norris initially and has been
incrementally fixed and updated to support new chips by a lot of people.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Gareth Powell <gpowell@broadcom.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...