Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24 |
|
#
1f652aa0 |
| 15-Feb-2022 |
Gleb Chesnokov <Chesnokov.G@raidix.com> |
scsi: qla2xxx: Use named initializers for q_dev_state
Make q_dev_state a little more readable and maintainable by using named initializers.
Also convert QLA8XXX_DEV_* macros into an enum and remove
scsi: qla2xxx: Use named initializers for q_dev_state
Make q_dev_state a little more readable and maintainable by using named initializers.
Also convert QLA8XXX_DEV_* macros into an enum and remove qla83xx_dev_state_to_string(), which is a duplicate of qdev_state().
Link: https://lore.kernel.org/r/AS8PR10MB495298515A7553C8D6D6E74D9D349@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26 |
|
#
a20821e3 |
| 20-Mar-2021 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Simplify qla8044_minidump_process_control()
This patch fixes the following Coverity complaint:
CID 177490 (#1 of 1): Unused value (UNUSED_VALUE) assigned_value: Assigning val
scsi: qla2xxx: Simplify qla8044_minidump_process_control()
This patch fixes the following Coverity complaint:
CID 177490 (#1 of 1): Unused value (UNUSED_VALUE) assigned_value: Assigning value from opcode & 0xffffff7fU to opcode here, but that stored value is overwritten before it can be used.
Link: https://lore.kernel.org/r/20210320232359.941-6-bvanassche@acm.org Cc: Quinn Tran <qutran@marvell.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.10.25, v5.10.24 |
|
#
a736e449 |
| 12-Mar-2021 |
Lee Jones <lee.jones@linaro.org> |
scsi: qla2xxx: Fix incorrectly named function qla8044_check_temp()
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla2xxx/qla_nx2.c:2038: warning: expecting prototype for qla4_8xxx_
scsi: qla2xxx: Fix incorrectly named function qla8044_check_temp()
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla2xxx/qla_nx2.c:2038: warning: expecting prototype for qla4_8xxx_check_temp(). Prototype was for qla8044_check_temp() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-11-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
#
aceba54b |
| 02-Dec-2020 |
Arun Easi <aeasi@marvell.com> |
scsi: qla2xxx: Fix compilation issue in PPC systems
Fix compile time errors reported on PPC systems,
qla_gbl.h:991:20: error: inlining failed in call to always_inline ‘qla_nvme_abort_set_optio
scsi: qla2xxx: Fix compilation issue in PPC systems
Fix compile time errors reported on PPC systems,
qla_gbl.h:991:20: error: inlining failed in call to always_inline ‘qla_nvme_abort_set_option’: function body not available
Link: https://lore.kernel.org/r/20201202132312.19966-7-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14 |
|
#
21a6cd48 |
| 05-Oct-2020 |
Tom Rix <trix@redhat.com> |
scsi: qla2xxx: Initialize variable in qla8044_poll_reg()
clang static analysis reports this problem:
qla_nx2.c:694:3: warning: 6th function call argument is an uninitialized value ql_log(
scsi: qla2xxx: Initialize variable in qla8044_poll_reg()
clang static analysis reports this problem:
qla_nx2.c:694:3: warning: 6th function call argument is an uninitialized value ql_log(ql_log_fatal, vha, 0xb090, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In qla8044_poll_reg(), when reading the reg fails, the error is reported by reusing the timeout error reporter. Because the value is unset, a garbage value will be reported. Initialize the value.
Link: https://lore.kernel.org/r/20201005144544.25335-1-trix@redhat.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8 |
|
#
77adf3f0 |
| 08-Sep-2020 |
Thomas Gleixner <tglx@linutronix.de> |
scsi/qla2xxx: Convert to SPDX license identifiers
All files in this driver directory contain the following notice:
See LICENSE.qla2xxx for copyright and licensing details.
LICENSE.qla2xxx can be
scsi/qla2xxx: Convert to SPDX license identifiers
All files in this driver directory contain the following notice:
See LICENSE.qla2xxx for copyright and licensing details.
LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains:
- A copyright notice
This copyright notice is redundant as all files contain the same copyright notice already
- A license notice
You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2).
This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file.
- The full GPLv2 license text
A redundant copy of LICENSES/preferred/GPL-2.0
Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files.
Finally remove the now redundant LICENSE.qla2xxx file.
Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42 |
|
#
ab053c09 |
| 18-May-2020 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Cast explicitly to uint16_t / uint32_t
Casting a pointer to void * and relying on an implicit cast from void * to uint16_t or uint32_t suppresses sparse warnings about endianness. Hen
scsi: qla2xxx: Cast explicitly to uint16_t / uint32_t
Casting a pointer to void * and relying on an implicit cast from void * to uint16_t or uint32_t suppresses sparse warnings about endianness. Hence cast explicitly to uint16_t and uint32_t. Additionally, remove superfluous void * casts.
Link: https://lore.kernel.org/r/20200518211712.11395-13-bvanassche@acm.org Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
#
04474d3a |
| 18-May-2020 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Change {RD,WRT}_REG_*() function names from upper case into lower case
This was suggested by Daniel Wagner.
Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org
scsi: qla2xxx: Change {RD,WRT}_REG_*() function names from upper case into lower case
This was suggested by Daniel Wagner.
Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
#
8ae17876 |
| 18-May-2020 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Simplify the functions for dumping firmware
Instead of passing an argument to the firmware dumping functions that tells these functions whether or not to obtain the hardware lock, obt
scsi: qla2xxx: Simplify the functions for dumping firmware
Instead of passing an argument to the firmware dumping functions that tells these functions whether or not to obtain the hardware lock, obtain that lock before calling these functions. This patch fixes the following recently introduced C=2 build error:
CHECK drivers/scsi/qla2xxx/qla_tmpl.c drivers/scsi/qla2xxx/qla_tmpl.c:1133:1: error: Expected ; at end of statement drivers/scsi/qla2xxx/qla_tmpl.c:1133:1: error: got } drivers/scsi/qla2xxx/qla_tmpl.h:247:0: error: Expected } at end of function drivers/scsi/qla2xxx/qla_tmpl.h:247:0: error: got end-of-input
Link: https://lore.kernel.org/r/20200518211712.11395-4-bvanassche@acm.org Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37 |
|
#
dbe6f492 |
| 30-Apr-2020 |
Jason Yan <yanaijie@huawei.com> |
scsi: qla2xxx: Use true, false for ha->fw_dumped
Fix the following coccicheck warning:
drivers/scsi/qla2xxx/qla_tmpl.c:1120:2-20: WARNING: Assignment of 0/1 to bool variable
Link: https://lore.ker
scsi: qla2xxx: Use true, false for ha->fw_dumped
Fix the following coccicheck warning:
drivers/scsi/qla2xxx/qla_tmpl.c:1120:2-20: WARNING: Assignment of 0/1 to bool variable
Link: https://lore.kernel.org/r/20200430121800.15323-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8 |
|
#
f91ff36a |
| 08-Aug-2019 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Suppress a Coveritiy complaint about integer overflow
This patch fixes the following Coverity complaint:
Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN) overflow_before_widen:
scsi: qla2xxx: Suppress a Coveritiy complaint about integer overflow
This patch fixes the following Coverity complaint:
Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN) overflow_before_widen: Potentially overflowing expression dma_eng_num * 65536U with type unsigned int (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type uint64_t (64 bits, unsigned).
Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9 |
|
#
0a59cea4 |
| 17-Apr-2019 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Increase the size of the mailbox arrays from 4 to 8
This patch avoids that Coverity complains that qla2x00_async_event() writes outside the bounds of the mb[] arrays (MBA_IDC_AEN case
scsi: qla2xxx: Increase the size of the mailbox arrays from 4 to 8
This patch avoids that Coverity complains that qla2x00_async_event() writes outside the bounds of the mb[] arrays (MBA_IDC_AEN case).
Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.0.8 |
|
#
bd432bb5 |
| 11-Apr-2019 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Leave a blank line after declarations
This patch improves readability of the qla2xxx source code.
Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell
scsi: qla2xxx: Leave a blank line after declarations
This patch improves readability of the qla2xxx source code.
Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2 |
|
#
3695310e |
| 12-Mar-2019 |
Joe Carnuccio <joe.carnuccio@cavium.com> |
scsi: qla2xxx: Update flash read/write routine
This patch makes following changes to flash access routines:
- update return type for read_optrom - use void instead of uint32_t * for buffer paramete
scsi: qla2xxx: Update flash read/write routine
This patch makes following changes to flash access routines:
- update return type for read_optrom - use void instead of uint32_t * for buffer parameter in read and write optrom routines - fix flash/nvram addressing
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16 |
|
#
807eb907 |
| 18-Oct-2018 |
Bart Van Assche <bvanassche@acm.org> |
scsi: qla2xxx: Improve several kernel-doc headers
This patch avoids that complaints about kernel-doc headers are reported when building with W=1.
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
scsi: qla2xxx: Improve several kernel-doc headers
This patch avoids that complaints about kernel-doc headers are reported when building with W=1.
Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
2db6228d |
| 23-Jan-2018 |
Bart Van Assche <bart.vanassche@wdc.com> |
scsi: qla2xxx: Fix function argument descriptions
Bring the kernel-doc headers in sync with the function argument lists.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani
scsi: qla2xxx: Fix function argument descriptions
Bring the kernel-doc headers in sync with the function argument lists.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
#
ed123b6e |
| 06-Dec-2017 |
Pravin Shedge <pravin.shedge4linux@gmail.com> |
scsi: qla2xxx: remove duplicate includes
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives.
Signed-off-by:
scsi: qla2xxx: remove duplicate includes
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12 |
|
#
0bf0efa1 |
| 30-Jun-2017 |
Colin Ian King <colin.king@canonical.com> |
scsi: qla2xxx: fix a bunch of typos and spelling mistakes
Fix the following typos/spelling mistakes:
"attribure" -> "attribute" "suppored" -> "supported" "Symobilic" -> "Symbolic" "iteself" -> "its
scsi: qla2xxx: fix a bunch of typos and spelling mistakes
Fix the following typos/spelling mistakes:
"attribure" -> "attribute" "suppored" -> "supported" "Symobilic" -> "Symbolic" "iteself" -> "itself" "reqeust" -> "request" "nvme_wait_on_comand" -> "nvme_wait_on_command" "bount" -> "bound" "captrue_mask" -> "capture_mask" "tempelate" -> "template"
..and also unwrap a line to fix a checkpatch warning.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
61778a1c |
| 11-Jan-2017 |
Bart Van Assche <bart.vanassche@sandisk.com> |
qla2xxx: Move two arrays from header files to .c files
This patch avoids that building with W=1 triggers compiler warnings similar to the following:
drivers/scsi/qla2xxx/qla_nx2.h:538:23: warning:
qla2xxx: Move two arrays from header files to .c files
This patch avoids that building with W=1 triggers compiler warnings similar to the following:
drivers/scsi/qla2xxx/qla_nx2.h:538:23: warning: ‘qla8044_reg_tbl’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Christoph Hellwig <hch@lst.de>
show more ...
|
Revision tags: v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2 |
|
#
df3f4cd0 |
| 09-Jul-2015 |
Bart Van Assche <bart.vanassche@sandisk.com> |
qla2xxx: Replace two macros with an inline function
Replace the QLA82XX_ADDR_IN_RANGE() and QLA8044_ADDR_IN_RANGE() macros with the inline function addr_in_range(). This avoids that the compiler rep
qla2xxx: Replace two macros with an inline function
Replace the QLA82XX_ADDR_IN_RANGE() and QLA8044_ADDR_IN_RANGE() macros with the inline function addr_in_range(). This avoids that the compiler reports the following warning when building with W=1: comparison of unsigned expression >= 0 is always true.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
show more ...
|
#
52c82823 |
| 09-Jul-2015 |
Bart Van Assche <bart.vanassche@sandisk.com> |
qla2xxx: Remove set-but-not-used variables
Detected these variables by building with W=1.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@ql
qla2xxx: Remove set-but-not-used variables
Detected these variables by building with W=1.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
show more ...
|
#
2374dd23 |
| 09-Jul-2015 |
Bart Van Assche <bart.vanassche@sandisk.com> |
qla2xxx: Declare local functions static
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomle
qla2xxx: Declare local functions static
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
show more ...
|
Revision tags: v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7 |
|
#
8d2b21db |
| 04-Jun-2015 |
Bart Van Assche <bart.vanassche@sandisk.com> |
qla2xxx: Fix indentation
Detected by smatch.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@
qla2xxx: Fix indentation
Detected by smatch.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
show more ...
|
Revision tags: v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3 |
|
#
9493c242 |
| 01-Nov-2014 |
Chen Gang <gang.chen.5i5j@gmail.com> |
qla2xxx: remove redundant declaration in 'qla_gbl.h'
Remove 2 redundant extern inline functions: qla8044_set_qsnt_ready() and qla8044_need_reset_handler(). At present, within upstream next kernel so
qla2xxx: remove redundant declaration in 'qla_gbl.h'
Remove 2 redundant extern inline functions: qla8044_set_qsnt_ready() and qla8044_need_reset_handler(). At present, within upstream next kernel source code, they are only used within "drivers/scsi/qla2xxx/qla_nx2.c".
The related error and warnings (with allmodconfig under tile):
CC [M] drivers/scsi/qla2xxx/qla_nx2.o drivers/scsi/qla2xxx/qla_nx2.c:1633:1: error: static declaration of 'qla8044_need_reset_handler' follows non-static declaration qla8044_need_reset_handler(struct scsi_qla_host *vha) ^ In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_nx2.c:11: drivers/scsi/qla2xxx/qla_gbl.h:756:20: note: previous declaration of 'qla8044_need_reset_handler' was here extern inline void qla8044_need_reset_handler(struct scsi_qla_host *vha); ^ drivers/scsi/qla2xxx/qla_gbl.h:756:20: warning: inline function 'qla8044_need_reset_handler' declared but never defined make[3]: *** [drivers/scsi/qla2xxx/qla_nx2.o] Error 1 make[2]: *** [drivers/scsi/qla2xxx] Error 2 make[1]: *** [drivers/scsi] Error 2 make: *** [drivers] Error 2
CC [M] drivers/scsi/qla2xxx/qla_tmpl.o In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_tmpl.c:7: drivers/scsi/qla2xxx/qla_gbl.h:755:20: warning: inline function 'qla8044_set_qsnt_ready' declared but never defined extern inline void qla8044_set_qsnt_ready(struct scsi_qla_host *vha); ^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
show more ...
|
Revision tags: v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1 |
|
#
9b13494c |
| 06-Aug-2014 |
Masanari Iida <standby24x7@gmail.com> |
treewide: Fix typo in printk
This patch fix spelling typo in printk within vairous part of the code.
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.o
treewide: Fix typo in printk
This patch fix spelling typo in printk within vairous part of the code.
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
show more ...
|