scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe

Introduce infrastructure in the driver to support the processing of
unsolicited LS (Link Service) requests. This will involve

scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe

Introduce infrastructure in the driver to support the processing of
unsolicited LS (Link Service) requests. This will involve the utilization
of a new pass-up of unsolicited FC-NVMe request IOCB interface. Unsolicited
requests will be submitted to the NVMe transport layer through
nvme_fc_rcv_ls_req(). Any received LS responses, which are sent using
xmt_ls_rsp(), will be forwarded to the firmware through the existing
Pass-Through IOCB interface, responsible for sending FC-NVMe Link Service
requests and responses.

Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Increase max limit of ql2xnvme_queues

Increase max limit of ql2xnvme_queues to (max_qpair - 1).

Link: https://lore.kernel.org/r/20220310092604.22950-13-njavali@marvell.com
Fixes: 651

scsi: qla2xxx: Increase max limit of ql2xnvme_queues

Increase max limit of ql2xnvme_queues to (max_qpair - 1).

Link: https://lore.kernel.org/r/20220310092604.22950-13-njavali@marvell.com
Fixes: 65120de26a54 ("scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues

Add ql2xnvme_queues module parameter to configure number of NVMe queues

Usage:

Number of NVMe Queues that can be

scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues

Add ql2xnvme_queues module parameter to configure number of NVMe queues

Usage:

Number of NVMe Queues that can be configured.

Final value will be min(ql2xnvme_queues, num_cpus, num_chip_queues),

1 - Minimum number of queues supported
8 - Default value
128 - Maximum number of queues supported

Link: https://lore.kernel.org/r/20220110050218.3958-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Add SLER and PI control support

BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15
of special feature control block for enabling SLER in FW. Set bit 8 (SLER
su

scsi: qla2xxx: Add SLER and PI control support

BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15
of special feature control block for enabling SLER in FW. Set bit 8 (SLER
supported) to 1 for the service parameter information when sending NVMe
PRLI request. Set BIT_14 of special feature control block for enabling PI
Control in FW. Driver should set bit 9 (PI Control supported) to 1 for the
service parameter information when sending NVMe PRLI request. Set BIT_13
for NVMe Async events.

Link: https://lore.kernel.org/r/20200904045128.23631-13-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Fix I/O failures during remote port toggle testing

Driver was using a lower value for dev_loss_tmo making it more prone to I/O
failures during remote port toggle testing. Set dev_loss

scsi: qla2xxx: Fix I/O failures during remote port toggle testing

Driver was using a lower value for dev_loss_tmo making it more prone to I/O
failures during remote port toggle testing. Set dev_loss_tmo to zero during
remote port registration to allow nvme-fc default dev_loss_tmo to be used,
which is higher than what driver was using.

Link: https://lore.kernel.org/r/20200904045128.23631-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi/qla2xxx: Convert to SPDX license identifiers

All files in this driver directory contain the following notice:

See LICENSE.qla2xxx for copyright and licensing details.

LICENSE.qla2xxx can be

scsi/qla2xxx: Convert to SPDX license identifiers

All files in this driver directory contain the following notice:

See LICENSE.qla2xxx for copyright and licensing details.

LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains:

- A copyright notice

This copyright notice is redundant as all files contain the same
copyright notice already

- A license notice

You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).

This can be replaced with the corresponding SPDX license identifier
(GPL-2.0-only) in the source files which reference this license
file.

- The full GPLv2 license text

A redundant copy of LICENSES/preferred/GPL-2.0

Remove the notices and add the SPDX license identifier GPL-2.0-only to the
source files.

Finally remove the now redundant LICENSE.qla2xxx file.

Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

scsi: qla2xxx: Fix endianness annotations in header files

Annotate members of FC protocol and firmware dump data structures as big
endian. Annotate members of RISC control structures as little endia

scsi: qla2xxx: Fix endianness annotations in header files

Annotate members of FC protocol and firmware dump data structures as big
endian. Annotate members of RISC control structures as little endian.
Annotate mailbox registers as little endian. Annotate the mb[] arrays as
CPU-endian because communication of the mb[] values with the hardware
happens through the readw() and writew() functions. readw() converts from
__le16 to u16 and writew() converts from u16 to __le16. Annotate 'handles'
as CPU-endian because for the firmware these are opaque values.

Link: https://lore.kernel.org/r/20200518211712.11395-15-bvanassche@acm.org
CC: Hannes Reinecke <hare@suse.de>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Modify NVMe include directives

Since struct sg_table is used in nvme-fc-driver.h, include
<linux/scatterlist.h> from that header file.

Since no definitions or declarations from <linu

scsi: qla2xxx: Modify NVMe include directives

Since struct sg_table is used in nvme-fc-driver.h, include
<linux/scatterlist.h> from that header file.

Since no definitions or declarations from <linux/blk-mq.h> are used in the
qla_nvme.h header file, do not include <linux/blk-mq.h> from that header
file.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Enable type checking for the SRB free and done callback functions

Since all pointers passed to the srb_t.done() and srb_t.free() functions
have type srb_t, change the type of the firs

scsi: qla2xxx: Enable type checking for the SRB free and done callback functions

Since all pointers passed to the srb_t.done() and srb_t.free() functions
have type srb_t, change the type of the first argument of these functions
from void * into struct srb *. This allows the compiler to verify the
argument types for these functions. This patch does not change any
functionality.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Introduce the be_id_t and le_id_t data types for FC src/dst IDs

Introduce the be_id_t and le_id_t data types for Fibre Channel source and
destination ID formats supported by the firmw

scsi: qla2xxx: Introduce the be_id_t and le_id_t data types for FC src/dst IDs

Introduce the be_id_t and le_id_t data types for Fibre Channel source and
destination ID formats supported by the firmware instead of using an
uint8_t[3] array. Introduce functions for converting from and to the
port_id_t data types. This patch does not change the behavior of the
qla2xxx driver but improves source code readability and also allows the
compiler to verify the endianness of Fibre Channel IDs.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition

This patch uses kref to protect access between fcp_abort path and nvme
command and LS command completion path. Stack trace below shows

scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition

This patch uses kref to protect access between fcp_abort path and nvme
command and LS command completion path. Stack trace below shows the abort
path is accessing stale memory (nvme_private->sp).

When command kref reaches 0, nvme_private & srb resource will be
disconnected from each other. Any subsequence nvme abort request will not
be able to reference the original srb.

[ 5631.003998] BUG: unable to handle kernel paging request at 00000010000005d8
[ 5631.004016] IP: [<ffffffffc087df92>] qla_nvme_abort_work+0x22/0x100 [qla2xxx]
[ 5631.004086] Workqueue: events qla_nvme_abort_work [qla2xxx]
[ 5631.004097] RIP: 0010:[<ffffffffc087df92>] [<ffffffffc087df92>] qla_nvme_abort_work+0x22/0x100 [qla2xxx]
[ 5631.004109] Call Trace:
[ 5631.004115] [<ffffffffaa4b8174>] ? pwq_dec_nr_in_flight+0x64/0xb0
[ 5631.004117] [<ffffffffaa4b9d4f>] process_one_work+0x17f/0x440
[ 5631.004120] [<ffffffffaa4bade6>] worker_thread+0x126/0x3c0

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x

scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x6c/0xf0 [qla2xxx]
PGD 800000084cf41067 PUD 84d288067 PMD 0
Oops: 0000 [#1] SMP
Call Trace:
[<ffffffff98abcfdf>] process_one_work+0x17f/0x440
[<ffffffff98abdca6>] worker_thread+0x126/0x3c0
[<ffffffff98abdb80>] ? manage_workers.isra.26+0x2a0/0x2a0
[<ffffffff98ac4f81>] kthread+0xd1/0xe0
[<ffffffff98ac4eb0>] ? insert_kthread_work+0x40/0x40
[<ffffffff9918ad37>] ret_from_fork_nospec_begin+0x21/0x21
[<ffffffff98ac4eb0>] ? insert_kthread_work+0x40/0x40
RIP [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x6c/0xf0 [qla2xxx]

The crash is due to a bad entry in the nvme_rport_list. This list is not
protected, and when a remoteport_delete callback is called, driver
traverses the list and crashes.

Actually, the list could be removed and driver could traverse the main
fcport list instead. Fix does exactly that.

Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware

This patch makes the code easier to read and more compact.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Gir

scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware

This patch makes the code easier to read and more compact.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures

Introduce two structures for the (DMA address, length) combination instead
of using separate structure members for the DMA address and le

scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures

Introduce two structures for the (DMA address, length) combination instead
of using separate structure members for the DMA address and length. This
patch fixes several Coverity complaints about 'cur_dsd' being used to write
outside the bounds of structure members.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands

In the *_done() functions, instead of returning early if sp->ref_count >=
2, only decrement sp->ref_count. In qla2xxx_eh_abo

scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands

In the *_done() functions, instead of returning early if sp->ref_count >=
2, only decrement sp->ref_count. In qla2xxx_eh_abort(), instead of deciding
what to do based on the value of sp->ref_count, decide which action to take
depending on the completion status of the firmware abort. Remove srb.cwaitq
and use srb.comp instead. In qla2x00_abort_srb(), call
isp_ops->abort_command() directly instead of calling qla2xxx_eh_abort().

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Add First Burst support for FC-NVMe devices

Add Support for First Burst for FC-NVMe protocol. This feature requires
First Burst support in the firmware.

Signed-off-by: Darren Trapp <

scsi: qla2xxx: Add First Burst support for FC-NVMe devices

Add Support for First Burst for FC-NVMe protocol. This feature requires
First Burst support in the firmware.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Migrate NVME N2N handling into state machine

This patch fixes regression introduced for the N2N support for FC-NVMe. For
FC-NVMe with N2N connection, instead of FW initiating the Logi

scsi: qla2xxx: Migrate NVME N2N handling into state machine

This patch fixes regression introduced for the N2N support for FC-NVMe. For
FC-NVMe with N2N connection, instead of FW initiating the Login, Driver
starts Login process. This patch migrates that new process from a
standalone path into existing session management state machine. With this
state change now driver will not wait for pull NPort ID from FW.

Fixes: edd05de197592 ("scsi: qla2xxx: Changes to support N2N logins")
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinec

scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Add FC-NVMe abort processing

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@sus

scsi: qla2xxx: Add FC-NVMe abort processing

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Add changes for devloss timeout in driver

Add support for error recovery within devloss timeout, now that
FC-NVMe transport support devloss timeout.

Signed-off-by: Darren Trapp <darr

scsi: qla2xxx: Add changes for devloss timeout in driver

Add support for error recovery within devloss timeout, now that
FC-NVMe transport support devloss timeout.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Move function prototype to correct header

Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jt

scsi: qla2xxx: Move function prototype to correct header

Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration

This code provides the interfaces to register remote and local ports of
FC4 type 0x28 with the FC-NVMe transport and transpor

scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration

This code provides the interfaces to register remote and local ports of
FC4 type 0x28 with the FC-NVMe transport and transports the requests
(FC-NVMe FC link services and FC-NVMe commands IUs) to the fabric. It
also provides the support for allocating h/w queues and aborting FC-NVMe
FC requests.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurhty@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
"Here are some SPDX-specific changes for 5.10-rc1.

They

Merge tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
"Here are some SPDX-specific changes for 5.10-rc1.

They include:

- driver fixes to make spdxcheck.pl work properly

- add GFDL licenses as "deprecated" but required due to some of our
documentation using them

- add Zlib license as "deprecated" but required because we have code
with this license in the tree.

- convert some drivers to have SPDX identifiers that previously
didn't have them.

All have been in linux-next for a very long time with no reported
issues"

* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
scripts/spdxcheck.py: handle license identifiers in XML comments
net/mlx5: IPsec: make spdxcheck.py happy
LICENSES/deprecated: add Zlib license text
LICENSE: add GFDL deprecated licenses
net/qla3xxx: Convert to SPDX license identifiers
net/qlge: Convert to SPDX license identifiers
net/qlcnic: Convert to SPDX license identifiers
scsi/qla2xxx: Convert to SPDX license identifiers
scsi/qla4xxx: Convert to SPDX license identifiers

show more ...

scsi: qla2xxx: Add SLER and PI control support

BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15
of special feature control block for enabling SLER in FW. Set bi

scsi: qla2xxx: Add SLER and PI control support

BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15
of special feature control block for enabling SLER in FW. Set bit 8 (SLER
supported) to 1 for the service parameter information when sending NVMe
PRLI request. Set BIT_14 of special feature control block for enabling PI
Control in FW. Driver should set bit 9 (PI Control supported) to 1 for the
service parameter information when sending NVMe PRLI request. Set BIT_13
for NVMe Async events.

Link: https://lore.kernel.org/r/20200904045128.23631-13-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: qla2xxx: Fix I/O failures during remote port toggle testing

Driver was using a lower value for dev_loss_tmo making it more prone to I/O
failures during remote port toggle testing.

scsi: qla2xxx: Fix I/O failures during remote port toggle testing

Driver was using a lower value for dev_loss_tmo making it more prone to I/O
failures during remote port toggle testing. Set dev_loss_tmo to zero during
remote port registration to allow nvme-fc default dev_loss_tmo to be used,
which is higher than what driver was using.

Link: https://lore.kernel.org/r/20200904045128.23631-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...