Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39 |
|
#
269cb04b |
| 14-Jul-2023 |
Chen-Yu Tsai <wenst@chromium.org> |
regulator: Use bitfield values for range selectors
Right now the regulator helpers expect raw register values for the range selectors. This is different from the voltage selectors, which are normali
regulator: Use bitfield values for range selectors
Right now the regulator helpers expect raw register values for the range selectors. This is different from the voltage selectors, which are normalized as bitfield values. This leads to a bit of confusion. Also, raw values are harder to copy from datasheets or match up with them, as datasheets will typically have bitfield values.
Make the helpers expect bitfield values, and convert existing users. The field in regulator_desc is renamed to |linear_range_selectors_bitfield|. This is intended to cause drivers added in the same merge window and out-of-tree drivers using the incorrect variable and values to break, preventing incorrect values being used on actual hardware and potentially producing magic smoke.
Also include bitops.h explicitly for ffs(), and reorder the header include statements. While at it, also replace module.h with export.h, since the only use is EXPORT_SYMBOL_GPL.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20230714081408.274567-1-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20 |
|
#
d3b81d97 |
| 16-Mar-2023 |
Douglas Anderson <dianders@chromium.org> |
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.19 and 5.4
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14") but changes regulat
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.19 and 5.4
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14") but changes regulators didn't exist in Linux 4.19 but did exist in Linux 5.4.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230316125351.3.I45bf925ca9537da5f647e2acb0ad207c0c98af81@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40 |
|
#
60ab7f41 |
| 08-May-2020 |
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> |
regulator: use linear_ranges helper
Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <brooni
regulator: use linear_ranges helper
Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3 |
|
#
100a2110 |
| 10-Dec-2019 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
regulator: max77650: add of_match table
We need the of_match table if we want to use the compatible string in the pmic's child node and get the regulator driver loaded automatically.
Signed-off-by:
regulator: max77650: add of_match table
We need the of_match table if we want to use the compatible string in the pmic's child node and get the regulator driver loaded automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20191210100725.11005-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2 |
|
#
3c7577d4 |
| 03-Jul-2019 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
regulator: max77650: use vsel_step
Use the new vsel_step field in the regulator description to instruct the regulator API on the required voltage ramping. Switch to using the generic regmap helpers
regulator: max77650: use vsel_step
Use the new vsel_step field in the regulator description to instruct the regulator API on the required voltage ramping. Switch to using the generic regmap helpers for voltage setting and remove the old set_voltage callback that handcoded the selector stepping.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190703161035.31808-3-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.1.16 |
|
#
ba2bf340 |
| 03-Jul-2019 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
regulator: max77650: add MODULE_ALIAS()
Define a MODULE_ALIAS() in the regulator sub-driver for max77650 so that the appropriate module gets loaded together with the core mfd driver.
Signed-off-by:
regulator: max77650: add MODULE_ALIAS()
Define a MODULE_ALIAS() in the regulator sub-driver for max77650 so that the appropriate module gets loaded together with the core mfd driver.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190703084849.9668-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5 |
|
#
59dec1f0 |
| 22-May-2019 |
Nathan Chancellor <natechancellor@gmail.com> |
regulator: max77650: Move max77651_SBB1_desc's declaration down
Clang warns:
drivers/regulator/max77650-regulator.c:32:39: warning: tentative definition of variable with internal linkage has incomp
regulator: max77650: Move max77651_SBB1_desc's declaration down
Clang warns:
drivers/regulator/max77650-regulator.c:32:39: warning: tentative definition of variable with internal linkage has incomplete non-array type 'struct max77650_regulator_desc' [-Wtentative-definition-incomplete-type] static struct max77650_regulator_desc max77651_SBB1_desc; ^ drivers/regulator/max77650-regulator.c:32:15: note: forward declaration of 'struct max77650_regulator_desc' static struct max77650_regulator_desc max77651_SBB1_desc; ^ 1 warning generated.
Move max77651_SBB1_desc's declaration below max77650_regulator_desc's definition so this warning does not happen.
Fixes: 3df4235ac41c ("regulator: max77650: Convert MAX77651 SBB1 to pickable linear range") Link: https://github.com/ClangBuiltLinux/linux/issues/491 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5 |
|
#
3df4235a |
| 25-Mar-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Convert MAX77651 SBB1 to pickable linear range
The pickable linear range is suitable for The MAX77651 SBB1. According to MAX77651 TV_SBB1 Code Table: Use BIT[1:0] as range selec
regulator: max77650: Convert MAX77651 SBB1 to pickable linear range
The pickable linear range is suitable for The MAX77651 SBB1. According to MAX77651 TV_SBB1 Code Table: Use BIT[1:0] as range selectors. Use BIT[5:2] as selectors for each linear range.
The MAX77651 SBB1 supports up to selector 57, selector 58 ~ 63 are RSVD, thus set n_voltage to 58.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1 |
|
#
5fe0ed24 |
| 05-Mar-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Use unsigned int for max77651_sbb1_regulator_volt_table
Make it consistent as .volt_table should be const unsigned int *.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-o
regulator: max77650: Use unsigned int for max77651_sbb1_regulator_volt_table
Make it consistent as .volt_table should be const unsigned int *.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.19.27, v5.0 |
|
#
6c98ac2a |
| 28-Feb-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Convert to use regulator_set/get_current_limit_regmap
Use regulator_set/get_current_limit_regmap helpers to save some code.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-
regulator: max77650: Convert to use regulator_set/get_current_limit_regmap
Use regulator_set/get_current_limit_regmap helpers to save some code.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.19.26, v4.19.25 |
|
#
d3d1a6a7 |
| 22-Feb-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Fix set_current_limit implementation
Current code always return error, fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@bayl
regulator: max77650: Fix set_current_limit implementation
Current code always return error, fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.19.24 |
|
#
721efb50 |
| 19-Feb-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Add missing .owner field in regulator_desc
Add missing .owner field in regulator_desc, which is used for refcounting.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-b
regulator: max77650: Add missing .owner field in regulator_desc
Add missing .owner field in regulator_desc, which is used for refcounting.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19 |
|
#
5358db54 |
| 30-Jan-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Fix include files
This is a platform driver, no need to include linux/i2c.h. Include linux/of.h for of_match_ptr.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Bar
regulator: max77650: Fix include files
This is a platform driver, no need to include linux/i2c.h. Include linux/of.h for of_match_ptr.
Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
bcc61f1c |
| 29-Jan-2019 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
regulator: max77650: add regulator support
Add regulator support for max77650. We support all four variants of this PMIC including non-linear voltage table for max77651 SBB1 rail.
Signed-off-by: Ba
regulator: max77650: add regulator support
Add regulator support for max77650. We support all four variants of this PMIC including non-linear voltage table for max77651 SBB1 rail.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40 |
|
#
60ab7f41 |
| 08-May-2020 |
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> |
regulator: use linear_ranges helper Change the regulator helpers to use common linear_ranges code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by
regulator: use linear_ranges helper Change the regulator helpers to use common linear_ranges code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3 |
|
#
100a2110 |
| 10-Dec-2019 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
regulator: max77650: add of_match table We need the of_match table if we want to use the compatible string in the pmic's child node and get the regulator driver loaded automatically.
regulator: max77650: add of_match table We need the of_match table if we want to use the compatible string in the pmic's child node and get the regulator driver loaded automatically. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20191210100725.11005-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2 |
|
#
3c7577d4 |
| 03-Jul-2019 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
regulator: max77650: use vsel_step Use the new vsel_step field in the regulator description to instruct the regulator API on the required voltage ramping. Switch to using the generic
regulator: max77650: use vsel_step Use the new vsel_step field in the regulator description to instruct the regulator API on the required voltage ramping. Switch to using the generic regmap helpers for voltage setting and remove the old set_voltage callback that handcoded the selector stepping. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190703161035.31808-3-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.1.16 |
|
#
ba2bf340 |
| 03-Jul-2019 |
Bartosz Golaszewski <bgolaszewski@baylibre.com> |
regulator: max77650: add MODULE_ALIAS() Define a MODULE_ALIAS() in the regulator sub-driver for max77650 so that the appropriate module gets loaded together with the core mfd driver.
regulator: max77650: add MODULE_ALIAS() Define a MODULE_ALIAS() in the regulator sub-driver for max77650 so that the appropriate module gets loaded together with the core mfd driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190703084849.9668-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5 |
|
#
59dec1f0 |
| 22-May-2019 |
Nathan Chancellor <natechancellor@gmail.com> |
regulator: max77650: Move max77651_SBB1_desc's declaration down Clang warns: drivers/regulator/max77650-regulator.c:32:39: warning: tentative definition of variable with interna
regulator: max77650: Move max77651_SBB1_desc's declaration down Clang warns: drivers/regulator/max77650-regulator.c:32:39: warning: tentative definition of variable with internal linkage has incomplete non-array type 'struct max77650_regulator_desc' [-Wtentative-definition-incomplete-type] static struct max77650_regulator_desc max77651_SBB1_desc; ^ drivers/regulator/max77650-regulator.c:32:15: note: forward declaration of 'struct max77650_regulator_desc' static struct max77650_regulator_desc max77651_SBB1_desc; ^ 1 warning generated. Move max77651_SBB1_desc's declaration below max77650_regulator_desc's definition so this warning does not happen. Fixes: 3df4235ac41c ("regulator: max77650: Convert MAX77651 SBB1 to pickable linear range") Link: https://github.com/ClangBuiltLinux/linux/issues/491 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5 |
|
#
3df4235a |
| 25-Mar-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Convert MAX77651 SBB1 to pickable linear range The pickable linear range is suitable for The MAX77651 SBB1. According to MAX77651 TV_SBB1 Code Table: Use BIT[1:0
regulator: max77650: Convert MAX77651 SBB1 to pickable linear range The pickable linear range is suitable for The MAX77651 SBB1. According to MAX77651 TV_SBB1 Code Table: Use BIT[1:0] as range selectors. Use BIT[5:2] as selectors for each linear range. The MAX77651 SBB1 supports up to selector 57, selector 58 ~ 63 are RSVD, thus set n_voltage to 58. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1 |
|
#
5fe0ed24 |
| 05-Mar-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Use unsigned int for max77651_sbb1_regulator_volt_table Make it consistent as .volt_table should be const unsigned int *. Signed-off-by: Axel Lin <axel.lin@ingi
regulator: max77650: Use unsigned int for max77651_sbb1_regulator_volt_table Make it consistent as .volt_table should be const unsigned int *. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.19.27, v5.0 |
|
#
6c98ac2a |
| 28-Feb-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Convert to use regulator_set/get_current_limit_regmap Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@in
regulator: max77650: Convert to use regulator_set/get_current_limit_regmap Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.19.26, v4.19.25 |
|
#
d3d1a6a7 |
| 22-Feb-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Fix set_current_limit implementation Current code always return error, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Bartosz Golaszewsk
regulator: max77650: Fix set_current_limit implementation Current code always return error, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.19.24 |
|
#
721efb50 |
| 19-Feb-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Add missing .owner field in regulator_desc Add missing .owner field in regulator_desc, which is used for refcounting. Signed-off-by: Axel Lin <axel.lin@ingics.c
regulator: max77650: Add missing .owner field in regulator_desc Add missing .owner field in regulator_desc, which is used for refcounting. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19 |
|
#
5358db54 |
| 30-Jan-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: max77650: Fix include files This is a platform driver, no need to include linux/i2c.h. Include linux/of.h for of_match_ptr. Signed-off-by: Axel Lin <axel.lin@ingics.c
regulator: max77650: Fix include files This is a platform driver, no need to include linux/i2c.h. Include linux/of.h for of_match_ptr. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|