|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20 |
|
| #
d3b81d97 |
| 16-Mar-2023 |
Douglas Anderson <dianders@chromium.org> |
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.19 and 5.4
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulat
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 4.19 and 5.4
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 4.19 but did exist in Linux 5.4.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.3.I45bf925ca9537da5f647e2acb0ad207c0c98af81@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7 |
|
| #
6dc9674d |
| 04-Sep-2020 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Add additional VDDCORE range
In the case of an unrecognised mini-card the Lochnagar will not
initialise the VDDCORE voltage register leading to a value outside of the
current r
regulator: lochnagar: Add additional VDDCORE range
In the case of an unrecognised mini-card the Lochnagar will not
initialise the VDDCORE voltage register leading to a value outside of the
current range. Add an additional range to cover these values, initially
this wasn't done since they are duplicates of the existing minimum
value.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200904122506.28017-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40 |
|
| #
60ab7f41 |
| 08-May-2020 |
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> |
regulator: use linear_ranges helper
Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Mark Brown <brooni
regulator: use linear_ranges helper
Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3 |
|
| #
f75841aa |
| 01-Oct-2019 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Add on_off_delay for VDDCORE
The VDDCORE regulator takes a good length of time to discharge down, so
add an on_off_delay to ensure DCVDD is removed before it is powered on
agai
regulator: lochnagar: Add on_off_delay for VDDCORE
The VDDCORE regulator takes a good length of time to discharge down, so
add an on_off_delay to ensure DCVDD is removed before it is powered on
again.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191001132017.1785-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19 |
|
| #
9df3bb31 |
| 28-Jan-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: lochnagar: Fix n_voltages setting for VDDCORE
With current n_voltages setting, regulator_list_voltage will return
-EINVAL when selector >=57. The highest selector is 0x41, so the
n_voltag
regulator: lochnagar: Fix n_voltages setting for VDDCORE
With current n_voltages setting, regulator_list_voltage will return
-EINVAL when selector >=57. The highest selector is 0x41, so the
n_voltages should be 0x41+1, i.e. 66.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.19.18, v4.19.17 |
|
| #
692f8b56 |
| 18-Jan-2019 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Add missing MODULE_DEVICE_TABLE
Add the missing MODULE_DEVICE_TABLE and remove the comma from the
separator on the end of the of_device_id array.
Signed-off-by: Charles Keepax
regulator: lochnagar: Add missing MODULE_DEVICE_TABLE
Add the missing MODULE_DEVICE_TABLE and remove the comma from the
separator on the end of the of_device_id array.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13 |
|
| #
4cac31e2 |
| 29-Dec-2018 |
Axel Lin <axel.lin@ingics.com> |
regulator: lochnagar: Set up correct .data field for "cirrus,lochnagar2-mic2vdd"
Fix trival copy-n-paste mistake.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@ope
regulator: lochnagar: Set up correct .data field for "cirrus,lochnagar2-mic2vdd"
Fix trival copy-n-paste mistake.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3 |
|
| #
d90acbc4 |
| 20-Nov-2018 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Move driver to binding from DT
Based on review comments on the MFD driver, move the child drivers for
the Lochnagar MFD over to binding through device tree.
Signed-off-by: Cha
regulator: lochnagar: Move driver to binding from DT
Based on review comments on the MFD driver, move the child drivers for
the Lochnagar MFD over to binding through device tree.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.18.19, v4.19.2, v4.18.18 |
|
| #
fa2bb8b9 |
| 08-Nov-2018 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Explicitly include register headers
Review of the MFD component has stated we should not include the
register headers through lochnagar.h and thus removed them from that
header
regulator: lochnagar: Explicitly include register headers
Review of the MFD component has stated we should not include the
register headers through lochnagar.h and thus removed them from that
header. Explicitly include them in the end drivers manually.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.18.17, v4.19.1, v4.19, v4.18.16 |
|
| #
d8b2a8e9 |
| 19-Oct-2018 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Use a consisent comment style for SPDX header
Update the rest of the comment at the start of the file to also use C++
style comments to match the required style of the SPDX hea
regulator: lochnagar: Use a consisent comment style for SPDX header
Update the rest of the comment at the start of the file to also use C++
style comments to match the required style of the SPDX header.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.18.15, v4.18.14, v4.18.13 |
|
| #
bef9391c |
| 08-Oct-2018 |
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> |
regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirru
regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.
The Lochnagar board provides power supplies for the attached
CODEC/Amp device. Currently this driver supports the microphone
supplies and the digital core voltage for the attached
device. There are some additional supplies that will be
added in time but these supplies are sufficient for most
systems/use-cases.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7 |
|
| #
6dc9674d |
| 04-Sep-2020 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Add additional VDDCORE range
In the case of an unrecognised mini-card the Lochnagar will not
initialise the VDDCORE voltage register leading to a value outside of t
regulator: lochnagar: Add additional VDDCORE range
In the case of an unrecognised mini-card the Lochnagar will not
initialise the VDDCORE voltage register leading to a value outside of the
current range. Add an additional range to cover these values, initially
this wasn't done since they are duplicates of the existing minimum
value.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200904122506.28017-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40 |
|
| #
60ab7f41 |
| 08-May-2020 |
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> |
regulator: use linear_ranges helper
Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by
regulator: use linear_ranges helper
Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3 |
|
| #
f75841aa |
| 01-Oct-2019 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Add on_off_delay for VDDCORE
The VDDCORE regulator takes a good length of time to discharge down, so
add an on_off_delay to ensure DCVDD is removed before it is pow
regulator: lochnagar: Add on_off_delay for VDDCORE
The VDDCORE regulator takes a good length of time to discharge down, so
add an on_off_delay to ensure DCVDD is removed before it is powered on
again.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191001132017.1785-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
| #
16646d8d |
| 19-Feb-2019 |
Mark Brown <broonie@kernel.org> |
Merge branch 'regulator-5.0' into regulator-5.1 stpmic1 const/range
|
|
Revision tags: v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19 |
|
| #
9df3bb31 |
| 28-Jan-2019 |
Axel Lin <axel.lin@ingics.com> |
regulator: lochnagar: Fix n_voltages setting for VDDCORE
With current n_voltages setting, regulator_list_voltage will return
-EINVAL when selector >=57. The highest selector is 0x41, so
regulator: lochnagar: Fix n_voltages setting for VDDCORE
With current n_voltages setting, regulator_list_voltage will return
-EINVAL when selector >=57. The highest selector is 0x41, so the
n_voltages should be 0x41+1, i.e. 66.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.19.18, v4.19.17 |
|
| #
692f8b56 |
| 18-Jan-2019 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Add missing MODULE_DEVICE_TABLE
Add the missing MODULE_DEVICE_TABLE and remove the comma from the
separator on the end of the of_device_id array.
Signed-of
regulator: lochnagar: Add missing MODULE_DEVICE_TABLE
Add the missing MODULE_DEVICE_TABLE and remove the comma from the
separator on the end of the of_device_id array.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.19.16, v4.19.15, v4.19.14, v4.19.13 |
|
| #
4cac31e2 |
| 29-Dec-2018 |
Axel Lin <axel.lin@ingics.com> |
regulator: lochnagar: Set up correct .data field for "cirrus,lochnagar2-mic2vdd"
Fix trival copy-n-paste mistake.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles
regulator: lochnagar: Set up correct .data field for "cirrus,lochnagar2-mic2vdd"
Fix trival copy-n-paste mistake.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3 |
|
| #
d90acbc4 |
| 20-Nov-2018 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Move driver to binding from DT
Based on review comments on the MFD driver, move the child drivers for
the Lochnagar MFD over to binding through device tree.
regulator: lochnagar: Move driver to binding from DT
Based on review comments on the MFD driver, move the child drivers for
the Lochnagar MFD over to binding through device tree.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.18.19, v4.19.2, v4.18.18 |
|
| #
fa2bb8b9 |
| 08-Nov-2018 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Explicitly include register headers
Review of the MFD component has stated we should not include the
register headers through lochnagar.h and thus removed them from
regulator: lochnagar: Explicitly include register headers
Review of the MFD component has stated we should not include the
register headers through lochnagar.h and thus removed them from that
header. Explicitly include them in the end drivers manually.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.18.17, v4.19.1, v4.19, v4.18.16 |
|
| #
d8b2a8e9 |
| 19-Oct-2018 |
Charles Keepax <ckeepax@opensource.cirrus.com> |
regulator: lochnagar: Use a consisent comment style for SPDX header
Update the rest of the comment at the start of the file to also use C++
style comments to match the required style of
regulator: lochnagar: Use a consisent comment style for SPDX header
Update the rest of the comment at the start of the file to also use C++
style comments to match the required style of the SPDX header.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v4.18.15, v4.18.14, v4.18.13 |
|
| #
bef9391c |
| 08-Oct-2018 |
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> |
regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection o
regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.
The Lochnagar board provides power supplies for the attached
CODEC/Amp device. Currently this driver supports the microphone
supplies and the digital core voltage for the attached
device. There are some additional supplies that will be
added in time but these supplies are sufficient for most
systems/use-cases.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|