ptp: annotate data-race around q->head and q->tail

[ Upstream commit 73bde5a3294853947252cd9092a3517c7cb0cd2d ]

As I was working on a syzbot report, I found that KCSAN would
probably complain that

ptp: annotate data-race around q->head and q->tail

[ Upstream commit 73bde5a3294853947252cd9092a3517c7cb0cd2d ]

As I was working on a syzbot report, I found that KCSAN would
probably complain that reading q->head or q->tail without
barriers could lead to invalid results.

Add corresponding READ_ONCE() and WRITE_ONCE() to avoid
load-store tearing.

Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ptp: vclock: use mutex to fix "sleep on atomic" bug

vclocks were using spinlocks to protect access to its timecounter and
cyclecounter. Access to timecounter/cyclecounter is backed by the same
drive

ptp: vclock: use mutex to fix "sleep on atomic" bug

vclocks were using spinlocks to protect access to its timecounter and
cyclecounter. Access to timecounter/cyclecounter is backed by the same
driver callbacks that are used for non-virtual PHCs, but the usage of
the spinlock imposes a new limitation that didn't exist previously: now
they're called in atomic context so they mustn't sleep.

Some drivers like sfc or ice may sleep on these callbacks, causing
errors like "BUG: scheduling while atomic: ptp5/25223/0x00000002"

Fix it replacing the vclock's spinlock by a mutex. It fix the mentioned
bug and it doesn't introduce longer delays.

I've tested synchronizing various different combinations of clocks:
- vclock->sysclock
- sysclock->vclock
- vclock->vclock
- hardware PHC in different NIC -> vclock
- created 4 vclocks and launch 4 parallel phc2sys processes with
lockdep enabled

In all cases, comparing the delays reported by phc2sys, they are in the
same range of values than before applying the patch.

Link: https://lore.kernel.org/netdev/69d0ff33-bd32-6aa5-d36c-fbdc3c01337c@redhat.com/
Fixes: 5d43f951b1ac ("ptp: add ptp virtual clock driver framework")
Reported-by: Yalin Li <yalli@redhat.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230221130616.21837-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

ptp: Speed up vclock lookup

ptp_convert_timestamp() is called in the RX path of network messages.
The current implementation takes ~5000ns on 1.2GHz A53. This is too much
for the hot path of packet

ptp: Speed up vclock lookup

ptp_convert_timestamp() is called in the RX path of network messages.
The current implementation takes ~5000ns on 1.2GHz A53. This is too much
for the hot path of packet processing.

Introduce hash table for fast vclock lookup in ptp_convert_timestamp().
The execution time of ptp_convert_timestamp() is reduced to ~700ns on
1.2GHz A53.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

ptp: Add cycles support for virtual clocks

ptp vclocks require a free running time for their timecounter.
Currently only a physical clock forced to free running is supported.
If vclocks are used, th

ptp: Add cycles support for virtual clocks

ptp vclocks require a free running time for their timecounter.
Currently only a physical clock forced to free running is supported.
If vclocks are used, then the physical clock cannot be synchronized
anymore. The synchronized time is not available in hardware in this
case. As a result, timed transmission with TAPRIO hardware support
is not possible anymore.

If hardware would support a free running time additionally to the
physical clock, then the physical clock does not need to be forced to
free running. Thus, the physical clocks can still be synchronized
while vclocks are in use.

The physical clock could be used to synchronize the time domain of the
TSN network and trigger TAPRIO. In parallel vclocks can be used to
synchronize other time domains.

Introduce support for a free running cycle counter called cycles to
physical clocks. Rework ptp vclocks to use this free running cycle
counter. Default implementation is based on time of physical clock.
Thus, behavior of ptp vclocks based on physical clocks without free
running cycle counter is identical to previous behavior.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

ptp: add kernel API ptp_get_vclocks_index()

Add kernel API ptp_get_vclocks_index() to get all ptp
vclocks index on pclock.

This is preparation for supporting ptp vclocks info query
through ethtool.

ptp: add kernel API ptp_get_vclocks_index()

Add kernel API ptp_get_vclocks_index() to get all ptp
vclocks index on pclock.

This is preparation for supporting ptp vclocks info query
through ethtool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: track available ptp vclocks information

Track available ptp vclocks information. Record index values
of available ptp vclocks during registering and unregistering.

This is preparation for supp

ptp: track available ptp vclocks information

Track available ptp vclocks information. Record index values
of available ptp vclocks during registering and unregistering.

This is preparation for supporting ptp vclocks info query
through ethtool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: support ptp physical/virtual clocks conversion

Support ptp physical/virtual clocks conversion via sysfs.
There will be a new attribute n_vclocks under ptp physical
clock sysfs.

- In default, t

ptp: support ptp physical/virtual clocks conversion

Support ptp physical/virtual clocks conversion via sysfs.
There will be a new attribute n_vclocks under ptp physical
clock sysfs.

- In default, the value is 0 meaning only ptp physical clock
is in use.
- Setting the value can create corresponding number of ptp
virtual clocks to use. But current physical clock is guaranteed
to stay free running.
- Setting the value back to 0 can delete virtual clocks and back
use physical clock again.

Another new attribute max_vclocks control the maximum number of
ptp vclocks.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: add ptp virtual clock driver framework

This patch is to add ptp virtual clock driver framework
utilizing timecounter/cyclecounter.

The patch just exports two essential APIs for PTP driver.

-

ptp: add ptp virtual clock driver framework

This patch is to add ptp virtual clock driver framework
utilizing timecounter/cyclecounter.

The patch just exports two essential APIs for PTP driver.

- ptp_vclock_register()
- ptp_vclock_unregister()

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: fix the race between the release of ptp_clock and cdev

In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reprodu

ptp: fix the race between the release of ptp_clock and cdev

In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:

ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[ 48.010809] general protection fault: 0000 [#1] SMP
[ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[ 48.019470] ... ^^^ a slub poison
[ 48.023854] Call Trace:
[ 48.024050] __fput+0x21f/0x240
[ 48.024288] task_work_run+0x79/0x90
[ 48.024555] do_exit+0x2af/0xab0
[ 48.024799] ? vfs_write+0x16a/0x190
[ 48.025082] do_group_exit+0x35/0x90
[ 48.025387] __x64_sys_exit_group+0xf/0x10
[ 48.025737] do_syscall_64+0x3d/0x130
[ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.026479] RIP: 0033:0x7f53b12082f6
[ 48.026792] ...
[ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[ 48.045001] Fixing recursive fault but reboot is needed!

This happens in:

static void __fput(struct file *file)
{ ...
if (file->f_op->release)
file->f_op->release(inode, file); <<< cdev is kfree'd here
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev); <<< cdev fields are accessed here

Namely:

__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put
module_put(p->owner) <<< *p is kfree'd, bang!

Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.

Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.

This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09d7fda ("chardev: add
helper function to register char devs with a struct device").

Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u
Analyzed-by: Stephen Johnston <sjohnsto@redhat.com>
Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 441 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

the rest of drivers/*: annotate ->poll() instances

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ptp: introduce ptp auxiliary worker

Many PTP drivers required to perform some asynchronous or periodic work,
like periodically handling PHC counter overflow or handle delayed timestamp
for RX/TX net

ptp: introduce ptp auxiliary worker

Many PTP drivers required to perform some asynchronous or periodic work,
like periodically handling PHC counter overflow or handle delayed timestamp
for RX/TX network packets. In most of the cases, such work is implemented
using workqueues. Unfortunately, Kernel workqueues might introduce
significant delay in work scheduling under high system load and on -RT,
which could cause misbehavior of PTP drivers due to internal counter
overflow, for example, and there is no way to tune its execution policy and
priority manuallly.

Hence, The kthread_worker can be used insted of workqueues, as it create
separte named kthread for each worker and its its execution policy and
priority can be configured using chrt tool.

This prblem was reported for two drivers TI CPSW CPTS and dp83640, so
instead of modifying each of these driver it was proposed to add PTP
auxiliary worker to the PHC subsystem.

The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker
and kthread_delayed_work and introduces two new PHC subsystem APIs:

- long (*do_aux_work)(struct ptp_clock_info *ptp) callback in
ptp_clock_info structure, which driver should assign if it require to
perform asynchronous or periodic work. Driver should return the delay of
the PTP next auxiliary work scheduling time (>=0) or negative value in case
further scheduling is not required.

- int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which
allows schedule PTP auxiliary work.

The name of kthread_worker thread corresponds PTP PHC device name "ptp%d".

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: create "pins" together with the rest of attributes

Let's switch to using device_create_with_groups(), which will allow us to
create "pins" attribute group together with the rest of ptp device
a

ptp: create "pins" together with the rest of attributes

Let's switch to using device_create_with_groups(), which will allow us to
create "pins" attribute group together with the rest of ptp device
attributes, and before userspace gets notified about ptp device creation.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: expose the programmable pins via sysfs

This patch adds the sysfs hooks needed in order to get and set the
programmable pin settings.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
S

ptp: expose the programmable pins via sysfs

This patch adds the sysfs hooks needed in order to get and set the
programmable pin settings.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: introduce programmable pins.

This patch adds a pair of new ioctls to the PTP Hardware Clock device
interface. Using the ioctls, user space programs can query each pin to
find out its current fu

ptp: introduce programmable pins.

This patch adds a pair of new ioctls to the PTP Hardware Clock device
interface. Using the ioctls, user space programs can query each pin to
find out its current function and also reprogram a different function
if desired.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

PTP: convert class code to use dev_groups

The dev_attrs field of struct class is going away soon, dev_groups
should be used instead. This converts the ptp class code to use the
correct field.

Acke

PTP: convert class code to use dev_groups

The dev_attrs field of struct class is going away soon, dev_groups
should be used instead. This converts the ptp class code to use the
correct field.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ptp: remember the adjusted frequency

This patch adds a field to the representation of a PTP hardware clock in
order to remember the frequency adjustment value dialed by the user.

Adding this field

ptp: remember the adjusted frequency

This patch adds a field to the representation of a PTP hardware clock in
order to remember the frequency adjustment value dialed by the user.

Adding this field will let us answer queries in the manner of adjtimex
in a follow on patch.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: Added a brand new class driver for ptp clocks.

This patch adds an infrastructure for hardware clocks that implement
IEEE 1588, the Precision Time Protocol (PTP). A class driver offers a
registr

ptp: Added a brand new class driver for ptp clocks.

This patch adds an infrastructure for hardware clocks that implement
IEEE 1588, the Precision Time Protocol (PTP). A class driver offers a
registration method to particular hardware clock drivers. Each clock is
presented as a standard POSIX clock.

The ancillary clock features are exposed in two different ways, via
the sysfs and by a character device.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John Stultz <john.stultz@linaro.org>

show more ...

ptp: fix the race between the release of ptp_clock and cdev

In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race.

ptp: fix the race between the release of ptp_clock and cdev

In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:

ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[ 48.010809] general protection fault: 0000 [#1] SMP
[ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[ 48.019470] ... ^^^ a slub poison
[ 48.023854] Call Trace:
[ 48.024050] __fput+0x21f/0x240
[ 48.024288] task_work_run+0x79/0x90
[ 48.024555] do_exit+0x2af/0xab0
[ 48.024799] ? vfs_write+0x16a/0x190
[ 48.025082] do_group_exit+0x35/0x90
[ 48.025387] __x64_sys_exit_group+0xf/0x10
[ 48.025737] do_syscall_64+0x3d/0x130
[ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.026479] RIP: 0033:0x7f53b12082f6
[ 48.026792] ...
[ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[ 48.045001] Fixing recursive fault but reboot is needed!

This happens in:

static void __fput(struct file *file)
{ ...
if (file->f_op->release)
file->f_op->release(inode, file); <<< cdev is kfree'd here
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev); <<< cdev fields are accessed here

Namely:

__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put
module_put(p->owner) <<< *p is kfree'd, bang!

Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.

Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.

This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09d7fda ("chardev: add
helper function to register char devs with a struct device").

Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u
Analyzed-by: Stephen Johnston <sjohnsto@redhat.com>
Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it un

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 441 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

the rest of drivers/*: annotate ->poll() instances

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ptp: introduce ptp auxiliary worker

Many PTP drivers required to perform some asynchronous or periodic work,
like periodically handling PHC counter overflow or handle delayed timestamp

ptp: introduce ptp auxiliary worker

Many PTP drivers required to perform some asynchronous or periodic work,
like periodically handling PHC counter overflow or handle delayed timestamp
for RX/TX network packets. In most of the cases, such work is implemented
using workqueues. Unfortunately, Kernel workqueues might introduce
significant delay in work scheduling under high system load and on -RT,
which could cause misbehavior of PTP drivers due to internal counter
overflow, for example, and there is no way to tune its execution policy and
priority manuallly.

Hence, The kthread_worker can be used insted of workqueues, as it create
separte named kthread for each worker and its its execution policy and
priority can be configured using chrt tool.

This prblem was reported for two drivers TI CPSW CPTS and dp83640, so
instead of modifying each of these driver it was proposed to add PTP
auxiliary worker to the PHC subsystem.

The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker
and kthread_delayed_work and introduces two new PHC subsystem APIs:

- long (*do_aux_work)(struct ptp_clock_info *ptp) callback in
ptp_clock_info structure, which driver should assign if it require to
perform asynchronous or periodic work. Driver should return the delay of
the PTP next auxiliary work scheduling time (>=0) or negative value in case
further scheduling is not required.

- int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which
allows schedule PTP auxiliary work.

The name of kthread_worker thread corresponds PTP PHC device name "ptp%d".

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: create "pins" together with the rest of attributes

Let's switch to using device_create_with_groups(), which will allow us to
create "pins" attribute group together with the rest of

ptp: create "pins" together with the rest of attributes

Let's switch to using device_create_with_groups(), which will allow us to
create "pins" attribute group together with the rest of ptp device
attributes, and before userspace gets notified about ptp device creation.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: expose the programmable pins via sysfs

This patch adds the sysfs hooks needed in order to get and set the
programmable pin settings.

Signed-off-by: Richard Cochran <richard

ptp: expose the programmable pins via sysfs

This patch adds the sysfs hooks needed in order to get and set the
programmable pin settings.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ptp: introduce programmable pins.

This patch adds a pair of new ioctls to the PTP Hardware Clock device
interface. Using the ioctls, user space programs can query each pin to
find ou

ptp: introduce programmable pins.

This patch adds a pair of new ioctls to the PTP Hardware Clock device
interface. Using the ioctls, user space programs can query each pin to
find out its current function and also reprogram a different function
if desired.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...