Revision tags: v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43 |
|
#
9b945d74 |
| 07-Jun-2021 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
pps: clients: parport: Switch to use module_parport_driver()
Switch to use module_parport_driver() to reduce boilerplate code.
Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy
pps: clients: parport: Switch to use module_parport_driver()
Switch to use module_parport_driver() to reduce boilerplate code.
Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210607153729.58623-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4 |
|
#
74ba9207 |
| 20-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 441 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5 |
|
#
3b1ad360 |
| 26-Nov-2018 |
YueHaibing <yuehaibing@huawei.com> |
pps: using ERR_PTR instead of NULL while pps_register_source fails
pps_register_source() has keeps error codes in a local variable, but it does not make use of the code. This patch let it return the
pps: using ERR_PTR instead of NULL while pps_register_source fails
pps_register_source() has keeps error codes in a local variable, but it does not make use of the code. This patch let it return the errcode in case of failure.
Suggested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
fb56d97d |
| 28-Jan-2018 |
Sudip Mukherjee <sudipm.mukherjee@gmail.com> |
pps: client: use new parport device model
Modify pps client driver to use the new parallel port device model. In that process, added an index to mention the device number when we have more than one
pps: client: use new parport device model
Modify pps client driver to use the new parallel port device model. In that process, added an index to mention the device number when we have more than one parallel port.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1 |
|
#
368301f2 |
| 20-Jul-2016 |
Jiri Slaby <jslaby@suse.cz> |
pps: do not crash when failed to register
With this command sequence:
modprobe plip modprobe pps_parport rmmod pps_parport
the partport_pps modules causes this crash:
BUG: unable to handl
pps: do not crash when failed to register
With this command sequence:
modprobe plip modprobe pps_parport rmmod pps_parport
the partport_pps modules causes this crash:
BUG: unable to handle kernel NULL pointer dereference at (null) IP: parport_detach+0x1d/0x60 [pps_parport] Oops: 0000 [#1] SMP ... Call Trace: parport_unregister_driver+0x65/0xc0 [parport] SyS_delete_module+0x187/0x210
The sequence that builds up to this is:
1) plip is loaded and takes the parport device for exclusive use:
plip0: Parallel port at 0x378, using IRQ 7.
2) pps_parport then fails to grab the device:
pps_parport: parallel port PPS client parport0: cannot grant exclusive access for device pps_parport pps_parport: couldn't register with parport0
3) rmmod of pps_parport is then killed because it tries to access pardev->name, but pardev (taken from port->cad) is NULL.
So add a check for NULL in the test there too.
Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7 |
|
#
0d01ff25 |
| 11-Apr-2013 |
David Howells <dhowells@redhat.com> |
Include missing linux/slab.h inclusions
Include missing linux/slab.h inclusions where the source file is currently expecting to get kmalloc() and co. through linux/proc_fs.h.
Signed-off-by: David H
Include missing linux/slab.h inclusions
Include missing linux/slab.h inclusions where the source file is currently expecting to get kmalloc() and co. through linux/proc_fs.h.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-s390@vger.kernel.org cc: sparclinux@vger.kernel.org cc: linux-efi@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: devel@driverdev.osuosl.org cc: x86@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
show more ...
|
Revision tags: v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1 |
|
#
437c5341 |
| 02-Nov-2011 |
James Nuss <jamesnuss@nanometrics.ca> |
pps: default echo function
A default echo function has been provided so it is no longer an error when you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo function. This allows some
pps: default echo function
A default echo function has been provided so it is no longer an error when you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo function. This allows some code re-use and also makes it easier to write client drivers since the default echo function does not normally need to change.
Signed-off-by: James Nuss <jamesnuss@nanometrics.ca> Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Rodolfo Giometti <giometti@linux.it> Cc: Ricardo Martins <rasm@fe.up.pt> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3 |
|
#
4f542e3d |
| 25-Jan-2011 |
Alexander Gordeev <lasaine@lvk.cs.msu.su> |
pps: claim parallel port exclusively
Both pps_parport and pps_gen_parport are written in a way that they can't share a port with any other driver. This can result in locking up the process that loa
pps: claim parallel port exclusively
Both pps_parport and pps_gen_parport are written in a way that they can't share a port with any other driver. This can result in locking up the process that loads modules or even the whole kernel if the modules are compiled in. Use PARPORT_FLAG_EXCL to indicate this.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.38-rc2, v2.6.38-rc1 |
|
#
a10203c6 |
| 12-Jan-2011 |
Alexander Gordeev <lasaine@lvk.cs.msu.su> |
pps: add parallel port PPS client
Add parallel port PPS client. It uses a standard method for capturing timestamps for assert edge transitions: getting a timestamp soon after an interrupt has happe
pps: add parallel port PPS client
Add parallel port PPS client. It uses a standard method for capturing timestamps for assert edge transitions: getting a timestamp soon after an interrupt has happened.
This is not a very precise source of time information due to interrupt handling delays. However, timestamps for clear edge transitions are much more precise because the interrupt handler continuously polls hardware port until the transition is done.
Hardware port operations require only about 1us so the maximum error should not exceed this value. This was my primary goal when developing this client.
Clear edge capture could be disabled using clear_wait parameter.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4 |
|
#
74ba9207 |
| 20-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it un
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5 |
|
#
3b1ad360 |
| 26-Nov-2018 |
YueHaibing <yuehaibing@huawei.com> |
pps: using ERR_PTR instead of NULL while pps_register_source fails pps_register_source() has keeps error codes in a local variable, but it does not make use of the code. This patch let i
pps: using ERR_PTR instead of NULL while pps_register_source fails pps_register_source() has keeps error codes in a local variable, but it does not make use of the code. This patch let it return the errcode in case of failure. Suggested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
fb56d97d |
| 28-Jan-2018 |
Sudip Mukherjee <sudipm.mukherjee@gmail.com> |
pps: client: use new parport device model Modify pps client driver to use the new parallel port device model. In that process, added an index to mention the device number when we hav
pps: client: use new parport device model Modify pps client driver to use the new parallel port device model. In that process, added an index to mention the device number when we have more than one parallel port. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1 |
|
#
368301f2 |
| 20-Jul-2016 |
Jiri Slaby <jslaby@suse.cz> |
pps: do not crash when failed to register With this command sequence: modprobe plip modprobe pps_parport rmmod pps_parport the partport_pps modules causes thi
pps: do not crash when failed to register With this command sequence: modprobe plip modprobe pps_parport rmmod pps_parport the partport_pps modules causes this crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: parport_detach+0x1d/0x60 [pps_parport] Oops: 0000 [#1] SMP ... Call Trace: parport_unregister_driver+0x65/0xc0 [parport] SyS_delete_module+0x187/0x210 The sequence that builds up to this is: 1) plip is loaded and takes the parport device for exclusive use: plip0: Parallel port at 0x378, using IRQ 7. 2) pps_parport then fails to grab the device: pps_parport: parallel port PPS client parport0: cannot grant exclusive access for device pps_parport pps_parport: couldn't register with parport0 3) rmmod of pps_parport is then killed because it tries to access pardev->name, but pardev (taken from port->cad) is NULL. So add a check for NULL in the test there too. Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7 |
|
#
0d01ff25 |
| 11-Apr-2013 |
David Howells <dhowells@redhat.com> |
Include missing linux/slab.h inclusions Include missing linux/slab.h inclusions where the source file is currently expecting to get kmalloc() and co. through linux/proc_fs.h. Si
Include missing linux/slab.h inclusions Include missing linux/slab.h inclusions where the source file is currently expecting to get kmalloc() and co. through linux/proc_fs.h. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-s390@vger.kernel.org cc: sparclinux@vger.kernel.org cc: linux-efi@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: devel@driverdev.osuosl.org cc: x86@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
show more ...
|
Revision tags: v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1 |
|
#
437c5341 |
| 02-Nov-2011 |
James Nuss <jamesnuss@nanometrics.ca> |
pps: default echo function A default echo function has been provided so it is no longer an error when you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo function.
pps: default echo function A default echo function has been provided so it is no longer an error when you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo function. This allows some code re-use and also makes it easier to write client drivers since the default echo function does not normally need to change. Signed-off-by: James Nuss <jamesnuss@nanometrics.ca> Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Rodolfo Giometti <giometti@linux.it> Cc: Ricardo Martins <rasm@fe.up.pt> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3 |
|
#
4f542e3d |
| 25-Jan-2011 |
Alexander Gordeev <lasaine@lvk.cs.msu.su> |
pps: claim parallel port exclusively Both pps_parport and pps_gen_parport are written in a way that they can't share a port with any other driver. This can result in locking up the
pps: claim parallel port exclusively Both pps_parport and pps_gen_parport are written in a way that they can't share a port with any other driver. This can result in locking up the process that loads modules or even the whole kernel if the modules are compiled in. Use PARPORT_FLAG_EXCL to indicate this. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.38-rc2, v2.6.38-rc1 |
|
#
a10203c6 |
| 12-Jan-2011 |
Alexander Gordeev <lasaine@lvk.cs.msu.su> |
pps: add parallel port PPS client Add parallel port PPS client. It uses a standard method for capturing timestamps for assert edge transitions: getting a timestamp soon after an int
pps: add parallel port PPS client Add parallel port PPS client. It uses a standard method for capturing timestamps for assert edge transitions: getting a timestamp soon after an interrupt has happened. This is not a very precise source of time information due to interrupt handling delays. However, timestamps for clear edge transitions are much more precise because the interrupt handler continuously polls hardware port until the transition is done. Hardware port operations require only about 1us so the maximum error should not exceed this value. This was my primary goal when developing this client. Clear edge capture could be disabled using clear_wait parameter. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|