dtpm_subsys.h - OpenGrok history log for /openbmc/linux/drivers/powercap/dtpm

Revision (<<< Hide revision tags) (Show revision tags >>>)	Date	Author	Comments
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18
# e4465561	28-Jan-2022	Daniel Lezcano <daniel.lezcano@linaro.org>	powercap/drivers/dtpm: Add dtpm devfreq with energy model support Currently the dtpm supports the CPUs via cpufreq and the energy model. This change provides the same for the device which supports d powercap/drivers/dtpm: Add dtpm devfreq with energy model support Currently the dtpm supports the CPUs via cpufreq and the energy model. This change provides the same for the device which supports devfreq. Each device supporting devfreq and having an energy model can be added to the hierarchy. The concept is the same as the cpufreq DTPM support: the QoS is used to aggregate the requests and the energy model gives the value of the instantaneous power consumption ponderated by the load of the device. Cc: Chanwoo Choi <cwchoi00@gmail.com> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-5-daniel.lezcano@linaro.org show more ...
# b9794a82	28-Jan-2022	Daniel Lezcano <daniel.lezcano@linaro.org>	powercap/drivers/dtpm: Convert the init table section to a simple array The init table section is freed after the system booted. However the next changes will make per module the DTPM description, s powercap/drivers/dtpm: Convert the init table section to a simple array The init table section is freed after the system booted. However the next changes will make per module the DTPM description, so the table won't be accessible when the module is loaded. In order to fix that, we should move the table to the data section where there are very few entries and that makes strange to add it there. The main goal of the table was to keep self-encapsulated code and we can keep it almost as it by using an array instead. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220128163537.212248-2-daniel.lezcano@linaro.org show more ...